Tender For Proposed Construction Of Residence Cum Office Building Of Sp,Dhalai And Addl.Sp(02)Nos At Dhalai Police Line,Jawaharnagar,Dhalai Tripura./Sh:Building Portion In/C Internal Water Supply,Sanitary Installation,Sewage & Drainage Works And 100
Tender Value
4.38 Crore
Estimated cost
Bid Submission
05 Nov 2026
22 days left
EMD
8.77 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Residence Cum Office Building Of Sp,Dhalai And Addl.Sp(02)Nos At Dhalai Police Line,Jawaharnagar,Dhalai Tripura./Sh:Building Portion In/C Internal Water Supply,Sanitary Installation,Sewage & Drainage Works And 100 Mtr Boundary Wall.
BOQ
| Sl. No. | Item Description |
| 1 | SUB-HEAD : EARTH WORK |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 3 | All kinds of soil |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 5 | All kinds of soil |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | All kinds of soil |
| 8 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 9 | Extra for additional lift of 1.5m or part thereof. |
| 10 | All kinds of soil |
| 11 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 12 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 13 | Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 14 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion): |
| 15 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. |
| 16 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. |
| 17 | Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: |
| 18 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.Note: For ANTI TERMITE TREATMENTThe work will be carried out as per IS: 6313 [Latest Revision]. Under the Insecticides Rule 1971: 10(3A) any person who desires to undertake pest control operations will be a Licence holder.The agency must complying with all safety health and welfare regulations, appertaining to staff and work people employed on the site.Keeping the site free from debris arising from the works during the work and leave the site free from debris on completion of work to the satisfaction of the Owner. The agency shall give a 3-year service guarntee in writing supplemented by a seperate and unilateral guarantee from the specialised agency for the job to keep the building free of termites for the specified period at no extra cost of the Owner. |
| 19 | SUB-HEAD : CEMENT CONCRETE WORK |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering |
| 21 | All work upto plinth level: |
| 22 | 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 23 | 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded stone aggregate of 20 mm nominal size) |
| 24 | 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded stone aggregate of 20 mm nominal size) |
| 25 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 26 | Foundations, footings, bases for columns. |
| 27 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification |
| 28 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 29 | SUB-HEAD : RCC WORK |
| 30 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: |
| 31 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 32 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- |
| 33 | 1 : 1.5 : 3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate of 20 mm nominal size) |
| 34 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- |
| 35 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 36 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with |
| 37 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 38 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 39 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 40 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 41 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 42 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits. |
| 43 | 50 mm thick |
| 44 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size). |
| 45 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 46 | Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 47 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 48 | Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 49 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 50 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 51 | Stairs (excluding landings) except spiral-staircases with wooden plank |
| 52 | Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. |
| 53 | Edges of slabs and breaks in floors and walls under 20 cm. wide |
| 54 | Weather shade, Chajjas, corbels etc., including edges. |
| 55 | SUB-HEAD : BRICK WORK |
| 56 | First class brick work in foundation and plinth including cost of all materials as required complete. |
| 57 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 58 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 59 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete. |
| 60 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 61 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- |
| 62 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 63 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 64 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 65 | Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:- |
| 66 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 67 | SUB-HEAD : CLADDING WORK |
| 68 | Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:- |
| 69 | 14 mm thick Granite of any colour and shade duly approved.:- |
| 70 | Area of slab upto 0.50 sqm. |
| 71 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:- |
| 72 | 14 mm thick Granite work. |
| 73 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work):- |
| 74 | White Agaria Marble Stone of approved shade of 14 mm thick (75 x 50 cm). |
| 75 | SUB-HEAD : WOOD WORK |
| 76 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : |
| 77 | Local Teak wood |
| 78 | Providing and fixing panelled / or panelled and glazedshutters for doors, windows and clerestory windowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcluding panelling and or glazing, which will be paidfor separately but including the wooden beading of 20× 12 mm for fixing panelling and or glazing as perdirection of Engineer-In-Charge. |
| 79 | Local Teak wood35 mm thick shutters |
| 80 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. |
| 81 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 82 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 83 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 84 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 85 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 86 | 300 x 16 mm |
| 87 | 250 x 16 mm |
| 88 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 89 | 300 x 10 mm |
| 90 | 250 x 10 mm |
| 91 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 92 | 125mm |
| 93 | 100mm |
| 94 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 95 | Single rubber stopper |
| 96 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 97 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in- charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 98 | Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc. |
| 99 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 100 | Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. |
| 101 | 25 mm thick. |
| 102 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated)handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 103 | Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 104 | Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) |
| 105 | SUB-HEAD : STEEL WORK |
| 106 | Providing structural steel work riveted,bolted or welded in built up sections trusses and framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete as required |
| 107 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- |
| 108 | In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 109 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 110 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 111 | SUB-HEAD : ALUMINIUM WORK |
| 112 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- |
| 113 | (i) For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 114 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- |
| 115 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 116 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- |
| 117 | With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 118 | With float glass panes of 5.5 mm thickness ( weight not less than 13.75 kg / sqm ) |
| 119 | Providing and fixing stainless steel (SS 304 grade) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:- |
| 120 | 205 x 19 mm |
| 121 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:- |
| 122 | Anodised aluminium of grade AC 15. |
| 123 | Providing and fixing 100 mm brass locks ( best make of approved quality ) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge. |
| 124 | SUB-HEAD : FLOORING AND SKIRTING WORK |
| 125 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineer-in-charge. |
| 126 | 40mm thick. |
| 127 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge. |
| 128 | 600 mm X 300 mm in all shades and design |
| 129 | Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge. |
| 130 | Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles300 mm x 300 mm in all shades and designs |
| 131 | Mat Finish Tiles600 mm x 600 mm in all shades and designs 1st class quality ceramic floor Porcelain tiles |
| 132 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 -2017, of approved make,in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcall complete as per direction of the Engineer-in-charge.. |
| 133 | Double charged Stainfree vitrified tiles (Glossy) |
| 134 | Size of tile 1200 mm x 600 mm |
| 135 | Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/Anti-Skid) |
| 136 | Size of tile 1200 mm x 600 mm |
| 137 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours & shades, in skirting,riser of steps,over 12 mm thick bed of cement mortar 1:3)1 cement: 3 fine sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc all complete as per direction of the Engineer-in-charge. |
| 138 | Double charged Stainfree vitrified tiles(Glossy) |
| 139 | Size of tile 600 mm x 600 mm |
| 140 | Glazed vitrified tiles (Mat Finih /Anti Skid) |
| 141 | Size of tile 600mmx600 mm |
| 142 | Providing and laying flamed finish Granite stone flooring with border in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc for Granite stone flooring complete in treads of steps and risers using single length upto 2.00 metre. all complete as specified and as directed by the Engineer-in-Charge. |
| 143 | 14mm thick Granite stone Slab |
| 144 | Extra for pre-finished nosing to treads of steps of marble stone. |
| 145 | Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge. |
| 146 | In dark shade using ordinary cement |
| 147 | Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) specially designed to assist the visually impaired - “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints etc. all complete as per direction of Engineer-in-charge. (Payment for grouting of joints to be made separately) |
| 148 | 80 mm thick factory made c.c. interlocking paver block of M-35 GradeProviding and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:. |
| 149 | 80 mm thick factory made c.c. interlocking paver block of M-35 with approved colour, design and pattern. |
| 150 | SUB-HEAD : ROOFING AND CEILING WORK |
| 151 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : |
| 152 | Single socketed pipe -110 mm OD |
| 153 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc. complete as per direction of Engineer-in-charge : |
| 154 | (i) Coupler - 110mm |
| 155 | (ii) Single equal tee without door - 110 x 110 x 110 mm |
| 156 | (iii) Single equal tee with door - 110 x 110 x 110 mm |
| 157 | (iv) Bend 87.5o - 110mm |
| 158 | (v) Plain shoe - 110 mm |
| 159 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain waterpipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required lengthincluding cutting brick work and fixing with cementmortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete as per direction of Engineer-in-charge. |
| 160 | 110mm |
| 161 | Providing and fixing to the inlet mouth of rain waterpipe PTMT grating with thickness of 8mm and weighing not less than 100gm. etc. complete as per direction of Engineer-in-charge. |
| 162 | 100mm |
| 163 | SUB-HEAD : FINISHING WORK |
| 164 | 12 mm cement plaster of mix |
| 165 | cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 166 | cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 167 | 15 mm cement plaster on the rough side of single or half brick wall of mix: |
| 168 | cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 169 | 6 mm cement plaster of mix: |
| 170 | cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 171 | Neat cement punning. |
| 172 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone graded from 6 mm to 10 mm nominal size dashed over and including the fresh plaster in two layers a) Under layer 12 mm cement plaster 1 : 4 ( 1 cement : 4 fine sand) b) Top layer 10 mm cement plaster 1 : 3 ( 1 cement : 3 fine sand ) mixed with 10% fine grounded hydrated lime by volume of cement and curing complete. |
| 173 | Ordinary Cement finish using ordinary cement. |
| 174 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 175 | Wall painting with premium acrylic emulsion paint ofinterior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour [Payment shall be made after submission of Test Certificate issued by the Manufacturer].Two coats |
| 176 | Finishing walls with premium acrylic smooth exteriorpaint with Silicon additives of required shade ofapproved brand and manufacture [Payment shall bemade after submission of Test Certificate issued by the Manufacturer] : |
| 177 | New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 178 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level: |
| 179 | In two coats |
| 180 | Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 181 | With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 182 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 183 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work |
| 184 | SUB-HEAD:WATER PROOFING WORK |
| 185 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : |
| 186 | Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 187 | Cement mortar 1:4 (1 cement : 4 fine sand ) |
| 188 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 189 | SUB-HEAD : SANITARY INSTALLATIONS |
| 190 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 191 | White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 192 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 193 | W.C. pan with ISI marked white solid plastic seat and lid |
| 194 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 195 | Range of four urinal basins with 10 litre white P.V.C automatic flushing cistern. |
| 196 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 197 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. |
| 198 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 199 | Flat back wash basin of size 550x400mm. |
| 200 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 201 | Kitchen sink without drain board |
| 202 | 610x460 mm bowl depth 200 mm. |
| 203 | Providing and fixing white vitreous china laboratorysink with C.I. brackets, C.P. brass chain with rubberplug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : |
| 204 | Size 600x450x200 mm. |
| 205 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 206 | (i) Semi rigid pipe - 32 mm dia |
| 207 | (ii) Flexible pipe - 32 mm dia |
| 208 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 209 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 210 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 211 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. |
| 212 | 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms |
| 213 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 214 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): |
| 215 | 100 mm dia. |
| 216 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 217 | (i) Single socketed pipe - 110 mm OD |
| 218 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion: |
| 219 | (i) Coupler - 110mm |
| 220 | (ii) Single pushfit Coupler - 110mm |
| 221 | (iii) Single equal tee without door - 110 x 110 x 110 mm |
| 222 | (iv) Single equal tee with door - 110 x 110 x 110 mm |
| 223 | (v) Double equal junction of required degree without door - 110 x 110 x 110 x 110 mm |
| 224 | (vi) Double equal junction of required degree with door - 110 x 110 x 110 x 110 mm |
| 225 | (vii) Bend 87.5o - 110mm |
| 226 | (viii)Plain shoe - 110 mm |
| 227 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.(i) 110 mm |
| 228 | SUB-HEAD : WATER SUPPLY |
| 229 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 230 | 15 mm nominal outer dia .Pipes. |
| 231 | 20 mm nominal outer dia .Pipes. |
| 232 | 25 mm nominal outer dia .Pipes. |
| 233 | 32 mm nominal outer dia .Pipes. |
| 234 | 40 mm nominal outer dia .Pipes. |
| 235 | 50 mm nominal outer dia .Pipes. |
| 236 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. |
| 237 | 15 mm nominal outer dia .Pipes. |
| 238 | 20 mm nominal outer dia .Pipes. |
| 239 | 25 mm nominal outer dia .Pipes. |
| 240 | 32 mm nominal outer dia .Pipes. |
| 241 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 242 | 15 mm nominal outer dia .Pipes. |
| 243 | 20 mm nominal outer dia .Pipes. |
| 244 | 25 mm nominal outer dia .Pipes. |
| 245 | 32 mm nominal outer dia .Pipes. |
| 246 | 40 mm nominal outer dia .Pipes. |
| 247 | 50 mm nominal outer dia .Pipes. |
| 248 | Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 : |
| 249 | 15 mm nominal bore |
| 250 | Providing and fixing C.P brass stop cock(concealed) of standard design and of approved make conforming to IS:8931 |
| 251 | 15 mm nominal bore. |
| 252 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 253 | 25 mm nominal bore |
| 254 | 40 mm nominal bore |
| 255 | Providing and fixing gun metal non-return valve of approved quality (screwed end): |
| 256 | 25 mm nominal bore |
| 257 | Vertical |
| 258 | 40 mm nominal bore |
| 259 | Vertical |
| 260 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 261 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : |
| 262 | With Second class bricks |
| 263 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: |
| 264 | 100 mm diameter |
| 265 | SUB HEAD : SEWAGE AND DRAINAGE WORKS |
| 266 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 267 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : |
| 268 | Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 269 | Supplying and installation of 2 H.P Mono block Pump 50x40 mm Suction and delivery pipe complete fabricated to C.0 base of standard size with holding down bolt with panel board, single phase connection motor and starter to main switch, indicator and earthening etc. complete as per direction of the Engineer-In-Charge (No additional cost for electrification upto main switch will be paid seperately) Measurement to be taken after successful operation of the Pump) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender