Tender For Maintenance Of Filtration Plants, Maintenance Of Srs, Ohts, Psts,Sumps,Silt Clearance, Maintenance Of Pipe Distribution System, Trunk Mains And Sub Mains By Way Of Replacement Of Damaged Ones With All Items/Fittings , Maintenance Of Raw Wa
Tender Value
3 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
4 days left
EMD
9000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Filtration Plants, Maintenance Of Srs, Ohts, Psts,Sumps,Silt Clearance, Maintenance Of Pipe Distribution System, Trunk Mains And Sub Mains By Way Of Replacement Of Damaged Ones With All Items/Fittings , Maintenance Of Raw Water Conveyance And Head Works For Stage Contract Of Phe Sub-Division Kulgam Part 2Nd Under Maintenance and repair
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge:All kinds of soils |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soils |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed byEngineer-in-Charge.All kinds of soil : |
| 5 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm dia GI pipes |
| 6 | 80 mm dia GI pipes |
| 7 | 65 mm dia GI pipes |
| 8 | 50 mm dia GI pipes |
| 9 | 40 mm dia GI pipes |
| 10 | 25 mm dia GI pipes |
| 11 | 20 mm dia GI pipes |
| 12 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 13 | 50 to 80 mm nominal bore |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 15 | Dismantling G.I./D.I pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore |
| 16 | 15 - 40 mm nominal bore |
| 17 | 80-100mm dia D.I pipes |
| 18 | Above 100 mm dia D.I pipes |
| 19 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 20 | Providing and laying flanged C.I. standard specials such as tees, bends,collars, tapers, caps etc ., suitable for flanged jointing as per IS : 1538 Up to 300 mm dia. |
| 21 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 100 mm dia pipes |
| 22 | 125 mm dia pipes |
| 23 | 150 mm dia pipes |
| 24 | 200 mm dia pipes |
| 25 | 250 mm dia pipes |
| 26 | 300 mm dia pipes |
| 27 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve |
| 28 | Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job.(The job is to be paid as per actual details at site) |
| 29 | Fixing of GI double collers/ arresting of leakages by way of welding including all sorts of carriages incl. cutting of available G.I pipes as per site requirement. 80 mm dia |
| 30 | 100 mm dia |
| 31 | 150 mm dia |
| 32 | 200 mm dia |
| 33 | Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using lead & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) 40 mm dia |
| 34 | 50 mm dia |
| 35 | 65 mm dia |
| 36 | 80 mm dia |
| 37 | 100 mm dia |
| 38 | 150 mm dia |
| 39 | 200 mm dia |
| 40 | Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit) |
| 41 | Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit) |
| 42 | Providing and fixing of pipe specials of approved make manufacture including cutting and threading the pipe and making long screws etc incl. all sorts of carriages involved complete. 100 mm dia G.I. Union |
| 43 | 80 mm dia G.I. Union |
| 44 | 65 mm dia G.I. Union |
| 45 | 50 mm dia G.I. Union |
| 46 | 40 mm dia G.I. Union |
| 47 | 25 mm dia G.I. Union |
| 48 | 20 mm dia G.I. Union |
| 49 | 15 mm dia G.I. Union |
| 50 | 100 mm dia G.I. Elbow |
| 51 | 80 mm dia G.I. Elbow |
| 52 | 65 mm dia G.I. Elbow |
| 53 | 50 mm dia G.I. Elbow |
| 54 | 40 mm dia G.I. Elbow |
| 55 | 25 mm dia G.I. Elbow |
| 56 | 20 mm dia G.I. Elbow |
| 57 | 15 mm dia G.I. Elbow |
| 58 | 80 mm dia G.I. Nipple 6\\" |
| 59 | 65 mm dia G.I. Nipple 6\\" |
| 60 | 50 mm dia G.I. Nipple 6\\" |
| 61 | 40 mm dia G.I. Nipple 6\\" |
| 62 | 25 mm dia G.I. Nipple 6\\" |
| 63 | 20 mm dia G.I. Nipple 6\\" |
| 64 | 15 mm dia G.I. Nipple 6\\" |
| 65 | 100 mm dia G.I. equal Tee |
| 66 | 80 mm dia G.I. equal Tee |
| 67 | 65 mm dia G.I. equal Tee |
| 68 | 50 mm dia G.I. equal tee |
| 69 | 40 mm dia G.I. equal tee |
| 70 | 25 mm dia G.I. equal tee |
| 71 | 20 mm dia G.I. equal tee |
| 72 | 15 mm dia G.I. equal tee |
| 73 | 20x20x15 mm dia G.I. Tee |
| 74 | 25x25x20 mm dia G.I. Tee |
| 75 | 40x40x25 mm dia G.I. Tee |
| 76 | 50x50x40 mm dia G.I. Tee |
| 77 | 65x65x50 mm dia G.I. Tee |
| 78 | 80x80x65 mm dia G.I. Tee |
| 79 | 20x15 mm dia Socket/ Reducer |
| 80 | 25x20 mm dia Socket/ Reducer |
| 81 | 40x25 mm dia Socket/ Reducer |
| 82 | 50x40 mm dia Socket/ Reducer |
| 83 | 65x50 mm dia Socket/ Reducer |
| 84 | 80x65 mm dia Socket/ Reducer |
| 85 | 20x15 mm dia Elbow/ Reducer |
| 86 | 25x20 mm dia Elbow/ Reducer |
| 87 | 40x25 mm dia Elbow/ Reducer |
| 88 | 50x40 mm dia Elbow/ Reducer |
| 89 | 65x50 mm dia Elbow/ Reducer |
| 90 | 80x65 mm dia Elbow/ Reducer |
| 91 | Providing & fixing of MS fittings viz bends of suitable degree, tees, collars etc to be fabricated from 6mm Nominal Size MS plate as per the requirement of site including cost of welding. The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job. |
| 92 | Providing and fixing bolts including nuts and washers complete. |
| 93 | P/F of washers/rubber insertions of different dias incl. all sorts of carriages complete.200/150/100/80/65/50mm dia |
| 94 | Supplying of spun yarn at site |
| 95 | Providing refreshment to the partcipants of the Indenpadnace Day , Republic day or other official Functions complette job including packing at venue with following Menu. Water Bottle One litre |
| 96 | Water Bottle 500 ml |
| 97 | Water bollte 250 ml |
| 98 | Disposable glass |
| 99 | Tissue paper |
| 100 | Hire charges of water dispensor incl. all sorts of carriages involved to & fro. |
| 101 | Supplying of 20 ltr water bottle for dispenser |
| 102 | Re-threading of damaged pipe ends including carriage from site to workshop and back. 20 mm dia |
| 103 | 25 mm dia |
| 104 | 40 mm dia |
| 105 | 50 mm dia |
| 106 | 65 mm dia |
| 107 | 80 mm dia |
| 108 | Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity and shall be paid as per actual details at site. For 0.50 HP to 2.00 HP |
| 109 | For 3.00 HP to 5.00 HP |
| 110 | For 5.00 HP to 10.00 HP |
| 111 | Demolishing R.C.C. work manually/by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50meters lead as per direction of Engineer-in-charge. |
| 112 | Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job) |
| 113 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. 5 KV to 10 KV |
| 114 | 10 KV to 20 KV |
| 115 | Hire charges of vehicle with licenced driver for carriage of various materials incl. bleaching powder ,Alum, dismantled materials etc including cost of fuel complete job |
| 116 | Engagement of labour for various jobs (desilting of structures,removal blockades,arresting of leakages, fixing of collars etc) Carriage/handling of pipes. |
| 117 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution incl. hire charges of all T&P complete job. |
| 118 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 119 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 120 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 121 | Providing and laying hand packed stone soling of suitable size nominal size including ramming and dressing including all leads lifts and all carriages complete. |
| 122 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 123 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 124 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 125 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 126 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 127 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 128 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 129 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 130 | Providing and fixing gun metal gate valve with C.I./DI/GI wheel of approved quality. 80 mm dia |
| 131 | 65 mm dia |
| 132 | 50 mm Dia |
| 133 | 40 mm Dia |
| 134 | 25 mm Dia |
| 135 | Replacement of old damaged G.I. Gate valves by way of new Gate valves of reputed make including cost of nuts, bolts, rubber insulations of ISI marked standard make incl. all carriages upto site of works, complete.(The unserviceable material shall be returned to Divl. store under proper R.I)100 mm dia Gate valve |
| 136 | 80 mm dia Gate valve |
| 137 | 65 mm dia Gate valve |
| 138 | 50 mm dia Gate valve |
| 139 | 40 mm dia Gate valve |
| 140 | 25 mm dia Gate valve |
| 141 | 20 mm dia Gate valve |
| 142 | Providing and fixing C.I./DI sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid100 mm dia. Class 1 |
| 143 | 125 mm dia. Class 1 |
| 144 | 150 mm dia. Class 1 |
| 145 | 200 mm dia. Class 1 |
| 146 | 250 mm dia. Class 1 |
| 147 | Repair to damaged DI sluice valves by way of replacing stem(threaded rod), welding etc all complete. 100 mm / 150 mm / 200 mm dia (to be paid as actual) |
| 148 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work, Complete job 200 mm dia |
| 149 | 150 mm dia |
| 150 | 100mm dia |
| 151 | 80mm dia |
| 152 | 50mm dia |
| 153 | Carriage of material from Source up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms |
| 154 | Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms |
| 155 | Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms |
| 156 | Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms |
| 157 | Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms |
| 158 | Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 159 | Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 160 | Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km |
| 161 | Sand & Agg. 20 mm avg. lead of upto 01 Kms |
| 162 | Sand & Agg. 20 mm avg. lead upto 02 Kms |
| 163 | Sand & Agg. 20 mm avg. lead upto 03 Kms |
| 164 | Sand & Agg. 20 mm avg. lead upto 04 Kms |
| 165 | Sand & Agg. 20 mm avg. lead upto 05 Kms |
| 166 | Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 167 | Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 168 | Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km |
| 169 | 40 mm Agg. avg. lead of upto 01 Km |
| 170 | 40 mm Agg. avg. lead upto 2 Kms |
| 171 | 40 mm Agg. avg. lead upto 3 Kms |
| 172 | 40 mm Agg. avg. lead upto 4 Kms |
| 173 | 40 mm Agg. avg. lead upto 5 Kms |
| 174 | 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 175 | 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 176 | 40 mm Agg. avg. lead beyond 20 Kms per additional Km |
| 177 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour Cement for an avg. lead upto 50 mtr. |
| 178 | Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 179 | Steel for an avg. lead upto 50 Mtr |
| 180 | Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 181 | Pipe for an avg. lead upto 50 Mtr |
| 182 | Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 183 | Sand & Agg.20mm for an avg. lead upto 50 Mtr |
| 184 | Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 185 | 40mm Agg. for an avg. lead upto 50 Mtr |
| 186 | 40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 187 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 188 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 189 | Columns, pillars, piers, abutments, posts and struts. |
| 190 | Suspended floors, roofs, landings, balconies and access platforms. |
| 191 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 192 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Water bound macadam road |
| 193 | Supplying/laying of GSB/ nallah muck incl. spreading, placing in position and all sorts of carriages involved.complete. |
| 194 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 195 | Repairs / replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessaries etc. incl all carrages complete job |
| 196 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 197 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 198 | GI Wire mesh 100x100 mm |
| 199 | Wire mesh (Rabbit) |
| 200 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 201 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 202 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 203 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 204 | Supply of unskilled labours |
| 205 | Supply of skilled labour |
| 206 | Hire charges of Welding machine with welder, gen set & helper including cost of electrods etc for welding of M.S Sheets , GI/ DI pipes etc including all carriages to & fro comp job. |
| 207 | Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job 03 Pole 200 Amp. |
| 208 | 03 Pole 100 Amp. |
| 209 | 04 Pole 100 Amp. |
| 210 | 04 Pole 32 Amp. |
| 211 | Providing and Fixing of 7.5 H.P. Starter of ISI marked standard Make, the job includes dismantling of damaged /non functional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job. |
| 212 | Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones incl. successful testing, commissioning. All types of carriage complete |
| 213 | Providing fixing & commissioning of 10 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever and carriages required .complete job200mm dia |
| 214 | 150mm dia |
| 215 | 100mm dia |
| 216 | 80mm dia |
| 217 | 65mm dia |
| 218 | 50mm dia |
| 219 | P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work 25mm dia Air Valve |
| 220 | 20mm dia Air Valve |
| 221 | Hire charges of Hydraulic Excavator (JCB) with operator for emergent works during floods, frost or heavy rains as and when needed incl. operational charges and fuel for working hours involved. |
| 222 | Removal of dead animals from off take points including disposal within 50 mts comp job |
| 223 | Supplying,laying and spreading of thick polythene sheets for protection of water leakage at head sites/offtake points during lean discharge incl. all sorts of carriages involved complete. |
| 224 | Opening out old wire crates those and re-binding after filling. |
| 225 | Filling empty cement bags with sand/ earth; including cost of sewing and strings; incl. cost of bags, Loading/Unloading sand/ earth filled bags lead upto 50m.( Earth or sand to be locally excavated within 50 Mts head load) incl. placing in position and all leads/ lifts complete. |
| 226 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively): |
| 227 | Slip clearance in ordinary soils disposal lead upto 50 m and lift upto 1.5 m |
| 228 | Silp clearance in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m |
| 229 | Supplying/laying of filter media from approved source Ganderbal duly screened, washed / sieved conforming to approved standards/specifications and laying in filter beds as per required grades including all carriages by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job. |
| 230 | Removing, washing of old filter media including washing of filter beds and laying of same in position complete job. |
| 231 | Supplying & fixing as per site requirement of Nylon rope of 10 mm dia of Standartd make including all carriages complete job |
| 232 | Providing/spreading of salt to be used during frost days incl. all carriages complete. |
| 233 | Supplying/laying of Pea size Garvel from approved source Ganderbal duly screened, washed / sieved conforming to approved standards/specifications including all carriages by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job. |
| 234 | Hire charges of dewatering motor incl. cost of fuel & all carriges complete. |
| 235 | Supplying and stacking of good earth at site including royalty (earthmeasured in stacks will be reduced by 20% for payment) |
| 236 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 237 | Supply of rubber tubes / cycle rubber tubes for checking of leakages incl. all carriages complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender