Tender For Augmentation Of Electrical Distribution Network Alongwith Allied Work Af Stn Dadri Under Aor Of Ge (Af) Faridabad
Tender Value
9.18 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
1 days left
EMD
18360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Electrical Distribution Network Alongwith Allied Work Af Stn Dadri Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanished steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core all as specified and directed. |
| 2 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanished steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 300 Sqmm 3.5 core complete all as specified and directed. |
| 3 | S&F , testing , commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 2.0 mm thick for inner door confirming to IS 8623 with angle iron 50 X 50 X 6 mm outoor, floor mounting type with closed bus bar, chamber and with copper bus bar with necessary insulators suitable for 3 phase, 4 wire 50 Hz AC supply including provn of indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron, complete all as specified and directed. INCOMING: (i) Copper bus bar capacity 300 Amps for Phase-R-Y-B- & neutral (ii) Thermal Magnetic Released based MCCB FP 200 Amps 36 KA I/C - 01 Nos (iii) Indicating Lamps (R, Y & B) - 01 Set (iv) Multifunction Meter - 01 SetOUTGOING:(i) Thermal Magnetic Released based MCCB FP 125 Amps 25 KA - 01 Nos (ii) Thermal Magnetic Released based MCCB FP 125 Amps 25 KA - 01 Nos |
| 4 | S&F solar street light All-in-One Solar Street Light high power LED cool white (6000k-6500k) Mono Crystalline Solar PV Module, Lithium ion / Lithium Ferro Phosphate battery with PIR sensor , High Efficacy LED, 30W aluminium extructed body , All - in - One SSL specially designed by progressive Intelligent Dimming which automatically control the dimmimg and brightness of light for 12hours mode with 100% brightness on movement detection limited to 2 hours or 240 cycles of PIR and 33% brightness for rest of time till morning , which increse the backup time having Over Charge Protection, Deep Discharge Protection, Over current Protection, Short circuit Protection, Over Voltage Protection with following tech specification complete all as specified and directed. :- (a) Working Temperature : -25°C to 65° C(b) Solar PV Module: 12V60W- Mono-Crystalline (c) Battery (LiFeP04) with BMS : 12.8 V 24 Ah(d) Backup : 2 days(e) Efficiency : > 93 %(f) lumious Efficacy : 125 lumen / Watt (g) Colour Temp : 5700 K(h) life Span : > 50000 hr(i)Driver : Inbuild DC-DC type(j)Body : Aluminum Extructed Body |
| 5 | Supply and errection in true vertical position 6 mtr long MS pole on pcc foundation suitable for 47 m/s wind speed with 4-8, 590mm PCD of foundation bolts complete with MS base plate of 300mmx300mmx6mm at bottom and swages from base to top in such manner that 114.3mm x 3.65mm upto 3 metres, 88.9mm x 3.25mm upto 1.5 metres , 76.1mm x 3.25mm upto 1.5 metres, above base plate with arm to fix solar street light at top and final tape plug, bolts, nuts, washers and screws incl painting with black bituminous paint two coat over one coat or red oxide primer after errection complete and marking pole number on pole complete all as specified and directed.Note : (i) Earth work and PCC foundation work shall be measured and paid separately.(ii) Description as per direction of Engineer-in-Charge will be printed on each pole without any extra cost. |
| 6 | M&L PCC (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in foundation bed of poles/stays etc, complete all as specified and directed. |
| 7 | M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in copings of poles/stays etc, complete all as specified and directed. |
| 8 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia GI earth strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed. |
| 9 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and directed. |
| 10 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and directed. |
| 11 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 12 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm, complete all as specified and directed. |
| 13 | M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’, laid dry flat, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender