Tender For Upgradation Of Boundary Wallof Gateway Towards Khan-I-Alams Bagh, Agra
Tender Value
42.74 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
11 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Boundary Wallof Gateway Towards Khan-I-Alams Bagh, Agra
BOQ
| Sl. No. | Item Description |
| 1 | Taking out R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of site - in- charge. |
| 2 | Taking out brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of site-in-charge. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below as directed by site in-charge. |
| 4 | Dismantling tile (for thickness of tiles 10 mm to 25 mm) work in floors and walls laid in cement mortar including stacking material within 50 metres lead as directed by site in-charge. |
| 5 | Brick work with cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level as directed by site in-charge. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. as directed by site in-charge. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as directed by site in-charge. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars as directed by site in-charge. |
| 9 | Providing and laying 12 mm cement plaster on brick wall of mix: 1:4 ratio (1 cement: 4 coarse sand) including dismantling old & decayed cement plaster as directed by site in-charge. |
| 10 | Providing and laying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as directed by site in-charge. |
| 11 | Providing and laying vitrified floor tiles in different sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as directed by site in-charge. |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles (water proof) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as directed by site in-charge. |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed by site in-charge. |
| 14 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats as directed by site in-charge. |
| 15 | Finishing walls with water proofing cement paint of required shade on new work (Two or more coats applied @ 3.84 kg/10 sqm) as directed by site in-charge. |
| 16 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitered, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer and fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as directed by site in-charge. |
| 17 | Providing and fixing ISI marked 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as directed by site in-charge. |
| 18 | Providing and fixing 30mm Second class teak wood glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as directed by site in-charge. |
| 19 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of site-in-charge. |
| 20 | Providing and fixing 65mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete as directed by site in-charge. |
| 21 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains of all kinds of soil (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m as directed by site in-charge. |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) as directed by site in-charge. |
| 23 | Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in coping, including mixed colouring pigment matching to original as directed by site in-charge. |
| 24 | Providing and laying 40 mm thick fine dressed Red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone as directed by site in-charge. |
| 25 | 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) as directed by site in-charge. |
| 26 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes as directed by site in-charge. |
| 27 | Taking Out of old MS Grill of size 1.5x1.50mtr. Of making 50x6mm iron angle iron bracket, with 12mm square bar and stacking in suitable place and refixing after repairing & replace for with new one as directed by site in-charge. |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as directed by site in-charge. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as directed by site in-charge. |
| 30 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by site in-charge. |
| 31 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade as directed by site in-charge. |
| 32 | Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 7.20.1 Red sand stone |
| 33 | Providing and fixing mosquito-proof fibre jali in the existing window frame, including cutting, fitting and necessary fasteners, complete as directed by the site-in-Charge. |
| 34 | Removal of settled debris/malwa from outside of site using manual labour and tractor trolly & throwing from site to outside of mumicipal limit upto 5 km including levelling as directed by site in-charge. |
| 35 | Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab upto 0.50 sqm. for making toilet wash basin counter as directed by site in-charge. |
| 36 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete as directed by site in-charge. |
| 37 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal as directed by site in-charge. |
| 38 | Providing and fixing P.V.C. flexible waste pipe of dia 32mm to 40 mm for sink or wash basin including P.V.C. waste fittings complete as directed by site in-charge |
| 39 | Providing and fixing CP Brass toilet paper holder as directed by site in-charge. |
| 40 | Providing and fixing Circular shape 450 mm dia mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing as directed by site in-charge. |
| 41 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms as directed by site in-charge. |
| 42 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Site-in-Charge. |
| 43 | Cutting chases in brick masonry walls for 50 mm diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including ecessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) as directed by site in-charge. |
| 44 | Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by site in-charge. |
| 45 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as directed by site in-charge. |
| 46 | Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete as directed by site in-charge. |
| 47 | Providing and fixing 125mm chromium plated brass handles with necessary screws etc. complete as directed by site in-charge. |
| 48 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration as directed by site in-charge. |
| 49 | Material and labour charges for sanitary fittings during execution of work. (49.1) Water Storage Tank 500 Ltr. Sintex. |
| 50 | SS C.P. Jali 4\\" - 6\\". |
| 51 | PVC 6\\"Elbow. |
| 52 | Solvent 118 ml pack |
| 53 | Bib cock C.P. brass |
| 54 | Angle valve C.P. brass |
| 55 | Valve 1\\" brass |
| 56 | Ball Cock |
| 57 | Long body CP brass |
| 58 | G.I. Tee 1.25\\" |
| 59 | Tank nipple 1\\" |
| 60 | CP nipple 1/2\\" |
| 61 | White cement |
| 62 | Tee 1\\" |
| 63 | Socket 1/2\\" |
| 64 | M seal |
| 65 | S S hinge |
| 66 | Gulli |
| 67 | S.S. Screw 1.5\\" |
| 68 | Extension Nipple 1\\" |
| 69 | Extension Nipple 2\\" |
| 70 | Shellac |
| 71 | Cistern handle |
| 72 | Water cupling |
| 73 | Flench CP brass |
| 74 | CP nipple 3\\" |
| 75 | CPVC pipe 1.25\\" |
| 76 | CPVC Tee 1.25\\" |
| 77 | FAPT 1.25\\" |
| 78 | Pillar Cock (Flora) with Chrome Finish - Hindware or Eq. |
| 79 | PVC pipe 4\\" dia |
| 80 | PVC Elbow 4 inch 110 mm 2-Way 90° Elbow Pipe Joint |
| 81 | PVC Elbow 4 inch 110 mm Tee |
| 82 | Stainless Steel Over-Head L-Type Polished Finish Shower with Arm (Chrome) |
| 83 | Repairs of gate & window |
| 84 | Labour charges for fitting & commissioning of all work |
| 85 | Material and labour charges for Electric fittings during execution of work.(50.02) 15 Watt. Trim squre panel LED Light - Havells or Eq. |
| 86 | Copper Wire 1.50 mm - (Havells) or Eq. (90 Mtr. In Bundle) |
| 87 | Copper Wire 2.50 mm - (Havells) or Eq. (90 Mtr. In Bundle) |
| 88 | MCB 16 Amp. (Havells). |
| 89 | SS Screw 1.50\\" (in pkt.) |
| 90 | SS Screw 2.50\\" (in pkt.) |
| 91 | Switch 5Amp. (Havells) or Eq. Modular |
| 92 | 16 Way Double Door Distribution Board (MCB panel box of size 1'x1.50') |
| 93 | Fiber Exhaust fan 300mm - (Havells) or Eq. |
| 94 | Swing Wall fan (400mm - (Havells) or Eq.) |
| 95 | PVC Kassing patti 25mm x 3.00 m |
| 96 | PVC Junction for kassing |
| 97 | Tee, Elbo, Corner |
| 98 | PVC Gulli 45mm |
| 99 | Kassing Keel in packet |
| 100 | Batton Holder (Havells) |
| 101 | Ceiling Rose |
| 102 | AC Box (Havells) |
| 103 | Fan Regulator (Havells) |
| 104 | Switch 25 Amp Cosal (Havells) |
| 105 | Socket 25 Amp Cosal (Havells) |
| 106 | Switch 10 Amp Cosal (Havells) |
| 107 | Five Pin Socket 10 Amp |
| 108 | MCB 4 way Double Doors (Havells) |
| 109 | Multi Stand Wire 4mm (Havells) |
| 110 | Cable 16mm x 4core (Havells) Armoured |
| 111 | LED Bulb 12 watt (Havells). |
| 112 | LED Bulb 9 watt (Havells). |
| 113 | LED Bulb 15 watt (Havells). |
| 114 | LED tubelight Complete 20 watt (Havells) |
| 115 | P.V.C Tape 3/4\\" |
| 116 | Brass batten holder |
| 117 | Cotton Tape |
| 118 | Bus bar 100 Amp. |
| 119 | Flexible pipe 1\\" dia |
| 120 | A.C. 1.5 Ton capacity make: providing & installation of IST split Ac- 5 star- voltas/LG. |
| 121 | Ceiling fan ( Bajaj/Crompton) (High Speed 3 Blade) |
| 122 | PVC Conduit Pipes of Dia 20mm to 32mm |
| 123 | Square Allwin Electric Concealed Box, Size: 8\\" X 8\\" G.I |
| 124 | Electric Concealed Box, Size: 8\\" X 3\\"/8'' X 4'' G.I |
| 125 | Concealed Metal Box, Size: 70mm-100mm 4 way - 8 way |
| 126 | Ceiling Fan Box, Size: 70mm-100mm 4 way - 8 way |
| 127 | High Durability Plastic Modular Surface Gang Box Module 12-18 |
| 128 | High Durability Plastic Modular Surface Gang Box Module 6-10 |
| 129 | High Durability Plastic Modular Surface Gang Box Module 3-5 |
| 130 | Labour for Fittings, Wiring & Commissioning of all work above material in all respect as directed by site in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender