Housing Urban and Rular Development Local Bodies Closing in 7 days TDR #58006721

Tender For Repairs To Cyclone Shelter And Purchasing Of 15 Kv Generator At Thittukattur In Per Attu Panchayat

Issued by Local Bodies · Cuddalore, Tamil Nadu
Tender Value
9.85 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
7 days left
EMD
9850
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Cyclone Shelter And Purchasing Of 15 Kv Generator At Thittukattur In Per Attu Panchayat

BOQ

Name of Work:- Repairs to Cyclone Shelter and purchasing of 15 KV Generator at Thittukattur in Per attu Panchayat
Sl. No. Item Description
1scrubbing and clearing away old damaged cement plastering inculuding all labour charges etc., complete. ordinary gravel, stoney eart First depth of 2m
2Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)
3Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete
4Dismantling and clearing away old damaged for Granolithic floor inculuding all labour charges etc., complete.(SD 33/38)
5Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
6Provision for Repair Steel Window & Door including all Labour Charges, material Charges etc., complete Door 1.50 x 2.10m
7window -1.20* 1.30 m
8Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum.
9White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm
10Repainting Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete
11Colour Washing RePainting two coats of Exterior emulsion paint with approved cement paints over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc.,(Colour washing)
12Painting two coats old Iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
13Provision for Electrification Arrangements (Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W of 14 SWG TC wire for concealed PVC light point (SD 20) Light Point
14Supply and fixing of 4x40W Tube light and fittings etc.,SD88 Tube light fitting
15Supply and fixing of 1200mm AC ceiling fan with stepped electronic 300W regulator with downrod SD110
16suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W Bulk head
17Wiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories of 150x 100x 63m size T.W switch for 15A pin non interlocking plug including pin top with painting concealed PVC 5 Amps Plug point (SD 139 ) concealed PVC 15 Amps Plug point
18Supply Delivery of Following Materials For Water Supply Works etc Complete Saddle 63x20
1925 mm PVC Pipe
2025 mm PVC Bend
2125 mm PVC FTA
2225 mm PVC Screw down Tap(Heavy)
2325 mm PVC Coupling 25 mm PVC End Cap
24supply and delivery of sintex tank-5000 litre
2532mm pvc pipe
2632 mm pvc bend
2732 mm pvc T
28Towards Labour Charge for Water Supply Arrangements
29construction of septic tank Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation and compacting the excavated soil in the sides of the corewall.
30Supplying and M-Sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
31Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
32Supplying & Erecting centering for sides & soffits including necessary supports etc., complete complying with standard specifications and as directed by the departmental officers
33Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
34Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P.Sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
35Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
36Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
37supply and delivery of 110 mm pvc pipe
38pvc bend
39Provision for labour charges for fixing of pvc pipe and special
40Provision for 15KV Generator Arrangements Supply of 15KVA/12KW Diesel Generator Set Comprising Air Cooled Diesel Engine Developing 20BHP@1500RPM Coupled to 3HP,415v,50HZ Alternator Complete With Standard Control Panel,Fuel Tank,Battery With Leads,Residential Silencer and Acoustic Enclosure Conforming to CPCBIV+Norms(Kirloskar,CromptonGreaves,Honda,Heavels or Equivalent)
41Provision for Nameboard Arrangements
42GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58006721
AUTHORITY Local Bodies
TENDER VALUE 9.85 Lakhs
LAST DATE 22-10-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Repairs To Cyclone Shelter And Purchasing Of 15 Kv Generator At Thittukattur In Per Attu Panchayat
Basic Detail
Tender No A2/1004/2026 SDRF(2026-2027)
Bidding Type Tender
Location
City Cuddalore
State Tamil Nadu
Key Dates
Publish Date 13 Oct 2026
Submission Date 22 Oct 2026
Open Date 22 Oct 2026
Finance
Tender Value 9.85 Lakhs
Tender Fee Ref. Documents
EMD 9850
Exemption Available
Document List
0a533de5-aa22-4f0e-9d4c-dbdf25961c30.html
BOQ_857228.xls
TECHBIT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 22, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Oct 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

0a533de5-aa22-4f0e-9d4c-dbdf25961c30.html

xls

BOQ_857228.xls

pdf

TECHBIT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender