Tender For Supply Of 3D Printers For Engineering Exploration Lab

Sharing tender

Tender For Supply Of 3D Printers For Engineering Exploration Lab Technology: Fused Deposition Modeling (Fdm) • Build Volume: Minimum 250 × 250 × 250 Mm • Nozzle Diameter: 0.4 Mm • Layer Resolution: 0.1–0.4 Mm • Filament Diameter: 1.75 Mm • Supported Materials: Pla, Petg, Abs, Tpu, Nylon • Auto Bed Levelling: Preferred • Connectivity: Usb, Wi-Fi, Lan/Ethernet Or Sd Card (Any Two Or More) • Heat Bed: Required • File Formats: Stl, Obj, 3Mf • Slicer Software: Compatible With Windows; Manufacturerprovided Or Open-Source Software • Connectivity: Usb, Sd Card, Wi-Fi Preferred • Supply: 230 V Ac ±10%, Single Phase, 50 Hz • Power Consumption: Maximum 500 W • Machine Dimensions: Approximately 500 × 500 × 600 Mm Or Equivalent. The Machine Should Be Completely Covered For The Safety Of Students. 6 Nos Page 2 Of 4 • Noise Level: ≤55 Db Preferred • Warranty: Minimum 2-Year Onsite Warranty • Installation & Training: Installation, Commissioning And User Training At Site To Be Included. Price / Equivalent Model Condition: • The Bidder Shall Submit The Make, Model, Technical Datasheet And A Point-Wise Compliance Statement Along With The Quotation. • Bamboo Lab P1S, Creality K2 Or Equivalent 3D Printers Accessories: • Material Spools :- 3 Pla, 1 Abs And 1 Tpu Material With Each 3D Printer • Extra 2 Nozzles Compatible With Machines With Each 3D Printer 2 Filament Dryer • Capacity 1.0 Kg Spools • Heating Mechanism: Active Ptc 360° Hot-Air Convection Heating System With Integrated Fan For Uniform Thermal Distribution. • Heater Rated Power: Minimum 110 W Ptc Heater (Overall Machine Rated Power: 160 W). • Temperature Range: Adjustable From 45°C To 70°C To Suit Standard And Engineering-Grade Polymers • Timer Control: Adjustable Drying Duration From 0 To 48 Hours With Automated Shut-Off. • Filament Compatibility: Standard Diameters Of 1.75 Mm And 2.85 Mm. • Material Compatibility: Must Safely Dry: Pla, Tpu, Abs, Asa, Petg, Pc, Pa, Pet, And Carbon-Fiber Reinforced Variants (Pla-Cf, Petg-Cf, Pa-Cf). • Feed System: Minimum Of Four (4) Dedicated Filament Exit Ports Equipped With Ptfe Guide Tubes For Direct-From-Dryer Multi-Printer Feeding. • Control Interface: Minimum 4-Inch Lcd Touch Screen Display For Parameter Entry And Monitoring. • Memory Retention: Power-Off Parameter Memory Function To Autoresume Active Settings/Cycle Post-Power Interruption. • Firmware Presets: One-Key Quick Selection Profiles For At Least 12 Distinct Filament Types, Alongside Fully Manual Overrides. • Electrical Input: 110V Ac, 50/60 Hz (Standard Us Plug Configurations). • Dimensions: 22D X 34W X 30H Centimeters