Tender For Dry Dock & Major Lay-Up Repair Of Offshore Drilling Jack-Up Rig Sagar Ratna
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
36 days left
EMD
2.03 Crore
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dry Dock & Major Lay-Up Repair Of Offshore Drilling Jack-Up Rig Sagar Ratna
BOQ
| Sl. No. | Item Description |
| 1 | Total Charges for Dry Dock/Major Lay-up repair of Offshore Drilling Jack-up Rig Sagar Ratna incluing material and services |
| 2 | Total Charges for Dry Dock/Major Lay-up repair of Offshore Drilling Jack-up Rig Sagar Ratna incluing material and services if quoted in INR |
| 3 | Total Charges for Dry Dock/Major Lay-up repair of Offshore Drilling Jack-up Rig Sagar Ratna, incluing material and services, if quoted in currency other than INR (USD/EUR/JPY/GBP) Appendix-1 (for Material) Line Item Wise Rate Sheet Dry Dock & Major Lay-up repair of Offshore Drilling Jack-up Rig Sagar Ratna Currency Chapter Sr. No. SOW Job Reference No. Description Qty Unit Unit Basic Rate (Material) if quoted in INR Unit Basic Rate (Material) if quoted in currency other than INR (USD/GBP/EUR/JPY) Total Basic Rate (Material) if quoted in INR Total Basic Rate (Material) if quoted in currency other than INR(USD/GBP/EUR/JPY) a b c d = a * b d = a * c Chapter 1: Renewal of Steel 1.0 1.1.1 Supply, Crop and renewal of ABS Grade Steel- Spud Can(PORT,STBD,FWD) 81.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 2.0 1.1.2 Supply, Crop and renewal of ABS Grade Steel- Pre-Loaded Tanks 132.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 3.0 1.1.3 Supply, Crop and renewal of ABS Grade Steel- Drill Water Tanks 84.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 4.0 1.1.4 Supply, Crop and renewal of ABS Grade Steel- Fresh Water Tanks 92.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 5.0 1.1.5 Supply, Crop and renewal of ABS Grade Steel- Fuel Oil Tanks 105.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 6.0 1.1.6 Supply, Crop and renewal of ABS Grade Steel- Steel Renewal Hull And Structures 91.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 7.0 1.1.7 Supply, Crop and renewal of ABS Grade Steel- Accommodation 77.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 8.0 1.1.8 Supply, Crop and renewal of ABS Grade Steel- Rig Floor And Dog House 67.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 9.0 1.1.9 Supply, Crop and renewal of ABS Grade Steel- Main Deck 139.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 10.0 1.1.10 Supply, Crop and renewal of ABS Grade Steel- Manholes 11.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 11.0 1.1.11 Supply, Crop and renewal of ABS Grade Steel- Hatch 17.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 12.0 1.1.12 Supply, Crop and renewal of ABS Grade Steel- Machinery Deck 64.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 13.0 1.1.13 Supply, Crop and renewal of ABS Grade Steel- Jack House, Cantilever Top & Deck Plate And Shale Shaker Area Top Plate 119.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 14.0 1.1.14 Supply, Crop and renewal of ABS Grade Steel- Helideck 83.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 15.0 1.1.15 Supply, Crop and renewal of ABS Grade Steel- Bracket Plate Size: 3/4\\" Thick, ASTM A-678 Gr. B 1.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 16.0 1.1.16 Supply, fabrication and installation of ABS Grade Steel for Structural Modification / Addition / Deck Extension / Equipment Foundation / Stool / Skid / Support Structure / Miscellaneous Structural Renewal, Repair and Fabrication Works 200.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 17.0 1.2.1 Supply, Crop and renewal of Non-ABS Steel- Trip tank 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 18.0 1.2.2 Supply, Crop and renewal of Non-ABS Steel- Platform for raw water pumps. 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 19.0 1.2.3 Supply, Crop and renewal of Non-ABS Steel- Cat walk, drag way & veedor ramp structure 32.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 20.0 1.2.4 Supply, Crop and renewal of Non-ABS Steel- All types ladders 50.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 21.0 1.2.5 Supply, Crop and renewal of Non-ABS Steel- Spud can access platform 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 22.0 1.2.6 Supply, Crop and renewal of Non-ABS Steel- Renewal of Chequered plate 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 23.0 1.2.7 Supply, Crop and renewal of Non-ABS Steel- Grating renewal 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 24.0 1.2.8 Supply, Crop and renewal of Non-ABS Steel- Monkey board cover 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 25.0 1.2.9 Supply, Crop and renewal of Non-ABS Steel- Flow channel 2.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 26.0 1.2.10 Supply, Crop and renewal of Non-ABS Steel- Platform below rotary table 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 27.0 1.2.11 Supply, Crop and renewal of Non-ABS Steel- Mud channel 7.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 28.0 1.2.12 Supply, Crop and renewal of Non-ABS Steel- Utility area 2.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 29.0 1.2.13 Supply, Crop and renewal of Non-ABS Steel- Mud pit room 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 30.0 1.2.14 Supply, Crop and renewal of Non-ABS Steel- Duct ( Ventilation system) 15.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 31.0 1.2.15 Supply, Crop and renewal of Non-ABS Steel- Renewal of complete sand trap 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 32.0 1.2.16 Supply, Crop and renewal of Non-ABS Steel- Fabrication of various sizes mushroom assembly with non ABS Steel 25.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 33.0 1.2.17 Supply, Crop and renewal of Non-ABS Steel- Occupational health fitness room 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 34.0 1.2.18 Supply, Crop and renewal of Non-ABS Steel- Jacking unit bull gear covers 30.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 35.0 1.2.19 Supply, Crop and renewal of Non-ABS Steel- Mud lab 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 36.0 1.2.20 Supply, Crop and renewal of Non-ABS Steel- Various location Railing 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 37.0 1.2.21 Supply, fabrication and installation of Non-ABS Steel for Structural Modification / Addition / Deck Extension / Equipment Foundation / Stool / Skid / Support Structure / Miscellaneous Structural Renewal, Repair and Fabrication Works, 150.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 38.0 1.3.1 Suuply and Replacement of Sacrificial Anode inside Spud Can 72.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 39.0 1.3.2 Supply and Replacement of Sacrificial Anode outside Spud Can 45.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 40.0 1.3.3 Supply and Replacement of Aluminum Alloy Anodes on Legs Bay (1 to 5) 45.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 41.0 1.3.4 Supply and Replacement Aluminum Alloy Anodes on Legs Bay (6 to 18) 117.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 42.0 1.4 Supply of Horizontal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 43.0 1.4 Crop and Renewal of Horizontal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 44.0 1.4 Supply of Diagonal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 45.0 1.4 Crop and Renewal of Diagonal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 46.0 1.4 Supply of internal bracings 120.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 47.0 1.4 Crop and Renewal of internal bracings 120.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 48.0 1.5 Supply and Renewal of Leg Markings and Draft Markings 1.0 AU 0.0 0.0 Chapter 1: Renewal of Steel 49.0 1.6 Crack Repair of Leg Rack Teeth / Leg Teeth 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 50.0 1.6 Crack Repair of RWT Rack Teeth / Teeth 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 51.0 1.6 Crack Repair in Spudcan Structure 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 52.0 1.6 Crack Repair at TKY Joints of Leg Bracings / Chords 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 53.0 1.6 Crack Repair in Other Structural Areas 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 54.0 1.6 Supply, Crop and Renewal / Replacement of RWT Rack Tooth / Tooth 3.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 55.0 1.6 Supply, Crop and Renewal / Replacement of Leg Rack Tooth / Leg Tooth 3.0 Nos. 0.0 0.0 Chapter 2: Pipe Renewal 56.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-10 mm (3/8\\") 14.0 m 0.0 0.0 Chapter 2: Pipe Renewal 57.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-15 mm (1/2\\") 138.0 m 0.0 0.0 Chapter 2: Pipe Renewal 58.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-20 mm (3/4\\") 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 59.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-25 mm (1\\") 268.0 m 0.0 0.0 Chapter 2: Pipe Renewal 60.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-32 mm (1-1/4\\") 216.0 m 0.0 0.0 Chapter 2: Pipe Renewal 61.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-40 mm (1-1/2\\") 768.0 m 0.0 0.0 Chapter 2: Pipe Renewal 62.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-50 mm (2\\") 722.0 m 0.0 0.0 Chapter 2: Pipe Renewal 63.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-65 mm (2-1/2\\") 660.0 m 0.0 0.0 Chapter 2: Pipe Renewal 64.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-80 mm (3\\") 2160.0 m 0.0 0.0 Chapter 2: Pipe Renewal 65.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-100 mm (4\\") 1403.0 m 0.0 0.0 Chapter 2: Pipe Renewal 66.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-125 mm (5\\") 696.0 m 0.0 0.0 Chapter 2: Pipe Renewal 67.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-150 mm (6\\") 1970.0 m 0.0 0.0 Chapter 2: Pipe Renewal 68.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-200 mm (8\\") 948.0 m 0.0 0.0 Chapter 2: Pipe Renewal 69.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-250 mm (10\\") 378.0 m 0.0 0.0 Chapter 2: Pipe Renewal 70.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-300 mm (12\\") 187.0 m 0.0 0.0 Chapter 2: Pipe Renewal 71.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-400 mm (16\\") 60.0 m 0.0 0.0 Chapter 2: Pipe Renewal 72.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-15 mm 420.0 m 0.0 0.0 Chapter 2: Pipe Renewal 73.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-25 mm 84.0 m 0.0 0.0 Chapter 2: Pipe Renewal 74.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-32 mm 72.0 m 0.0 0.0 Chapter 2: Pipe Renewal 75.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-15 mm 150.0 m 0.0 0.0 Chapter 2: Pipe Renewal 76.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-20 mm 91.0 m 0.0 0.0 Chapter 2: Pipe Renewal 77.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-25 mm 1026.0 m 0.0 0.0 Chapter 2: Pipe Renewal 78.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-32 mm 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 79.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-40 mm 2244.0 m 0.0 0.0 Chapter 2: Pipe Renewal 80.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-50 mm 1298.0 m 0.0 0.0 Chapter 2: Pipe Renewal 81.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-65 mm 660.0 m 0.0 0.0 Chapter 2: Pipe Renewal 82.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-80 mm 1080.0 m 0.0 0.0 Chapter 2: Pipe Renewal 83.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-100 mm 798.0 m 0.0 0.0 Chapter 2: Pipe Renewal 84.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-125 mm 926.0 m 0.0 0.0 Chapter 2: Pipe Renewal 85.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-150 mm 365.0 m 0.0 0.0 Chapter 2: Pipe Renewal 86.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-200 mm 170.0 m 0.0 0.0 Chapter 2: Pipe Renewal 87.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-300 mm 324.0 m 0.0 0.0 Chapter 2: Pipe Renewal 88.0 2.1 Supply, Crop and Renewal of 90/10 Copper-Nickel Pipe / Tube, ASTM B466, UNS C70600, of various sizes and applicable wall thickness, complete as specified in the Scope of Work. 5.0 MT 0.0 0.0 Chapter 2: Pipe Renewal 89.0 2.1 Supply and Renewal / Installation of 90/10 Copper-Nickel Pipe Fittings, of compatible approved material/specification, various sizes and connection types, complete as specified in the Scope of Work. 1.0 MT 0.0 0.0 Chapter 2: Pipe Renewal 90.0 2.1 Supply & Installation/Renewal of 50 mm thick Insulation for Hot-Service Piping using Mineral Wool/Rock Wool or approved equivalent suitable for the applicable service temperature, including protective outer covering/cladding and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 91.0 2.1 Supply & Installation/Renewal of 75 mm thick Insulation for High-Temperature/Exhaust Piping using high-temperature Mineral Wool/Calcium Silicate/Ceramic Fibre or approved equivalent suitable for the applicable service temperature, including protective outer covering/cladding and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 92.0 2.1 Supply & Installation/Renewal of 25 mm thick Insulation for Cold-Service/HVAC/Chilled-Water Piping using closed-cell Elastomeric NBR or approved equivalent suitable for condensation control and applicable service temperature, including adhesive, joint sealing, vapour barrier/protective finish and all associated materials/accessories, complete as specified in the Scope of Work. 1000.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 93.0 2.1 Supply & Installation/Renewal of 50 mm thick Removable Insulation Mattress/Pad for Valves, Flanges and Other Applicable Components using Mineral Wool/Ceramic Fibre or approved equivalent with suitable removable outer covering, including fastening arrangement and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 94.0 2.2 Supply, Crop and Renewal of Copper Tube ASTM B88 type k heavy wall - 1/4\\" 30.0 m 0.0 0.0 Chapter 2: Pipe Renewal 95.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 1/4\\" 1200.0 m 0.0 0.0 Chapter 2: Pipe Renewal 96.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 3/8\\" 550.0 m 0.0 0.0 Chapter 2: Pipe Renewal 97.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 1/2\\" 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 98.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-25mm 300.0 m 0.0 0.0 Chapter 2: Pipe Renewal 99.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-40mm 240.0 m 0.0 0.0 Chapter 2: Pipe Renewal 100.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-80mm 500.0 m 0.0 0.0 Chapter 2: Pipe Renewal 101.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS ASTM A106 Gr.C, GI coated NB-50mm 12.0 m 0.0 0.0 Chapter 2: Pipe Renewal 102.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS ASTM A106 Gr.C, GI coated NB-80mm 6.0 m 0.0 0.0 Chapter 2: Pipe Renewal 103.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS API 5L X65 PSL-2, GI coated NB-100mm 25.0 m 0.0 0.0 Chapter 2: Pipe Renewal 104.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 15mm thick API 5L X65 PSL-2, GI coated NB-50mm 24.0 m 0.0 0.0 Chapter 2: Pipe Renewal 105.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 20mm thick API 5L X65 PSL-2, GI coated NB-125mm 150.0 m 0.0 0.0 Chapter 2: Pipe Renewal 106.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 21mm thick API 5L X65 PSL-2, GI coated NB-80mm 250.0 m 0.0 0.0 Chapter 3: Valve Renewal 107.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 37.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 108.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 109.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 110.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 111.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 112.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 113.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 16K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 114.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 115.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 11.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 116.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 117.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 118.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 400 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 119.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 120.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 121.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 80.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 122.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 5K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 123.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 5K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 124.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 125.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 126.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 127.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 128.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 129.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 130.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 131.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 250 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 132.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 133.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 16K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 134.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 135.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 136.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 137.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 250 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 138.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 200 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 139.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 250 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 140.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 300 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 141.0 3.7 Supply, Crop and Renewal of Pneumatic-Operated Butterfly Valve, JIS 10K, NB 200 mm, Body: Cast Carbon Steel (SCPH2), Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 142.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 143.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 144.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 145.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 146.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 27.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 147.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 40 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 148.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 149.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 150.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 151.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 152.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 153.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 154.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 155.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 35.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 156.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Aluminium Bronze Casting, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 157.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 32 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 158.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 159.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 160.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 161.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 162.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 163.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 164.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Aluminium Bronze Casting, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 165.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 16K, NB 100 mm, Body: Cast Iron, Disc/Seat: Cast IronSeat Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 166.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 167.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 168.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 169.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 170.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 171.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 100 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 172.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 173.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 28.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 174.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 175.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 176.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 177.0 3.1 Supply, Crop and Renewal of Pneumatic Cylinder Operated Globe Stop Check Valve, JIS 10K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 178.0 3.1 Supply, Crop and Renewal of Pneumatic Cylinder Operated Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 179.0 3.11 Supply, Crop and Renewal of Pneumatic Cylinder Operated Angle Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 180.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 181.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 182.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 183.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 184.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 185.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 186.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 187.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 188.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 189.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 190.0 3.13 Supply, Crop and Renewal of Pressure Control Valve, JIS 10K, NB 250 mm, Body: Cast Iron FCD 45, Disc/Seat: SUS304, Stem: SUS 316, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 191.0 3.14 Supply, Crop and Renewal of Safety Relief Valve, JIS 5K, NB 25 mm, Body: Cast Iron, Disc/Seat: Stainless Steel, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 192.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 193.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 194.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 195.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 13.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 196.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 197.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 198.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 199.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 200.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 201.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 202.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 203.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 204.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 205.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 206.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 207.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 208.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 209.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 210.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 300 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 211.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 16K, NB 100 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 212.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 16K, NB 150 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 213.0 3.16 Supply, Crop and Renewal of Swing Check Valve (STR Type), JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 214.0 3.16 Supply, Crop and Renewal of Swing Check Valve (STR Type), JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 215.0 3.17 Supply, Crop and Renewal of Reach-Rod Operated Gate (Sluice) Valve (PLT), JIS 10K, NB 250 mm, Body: Cast iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 216.0 3.17 Supply, Crop and Renewal of Reach-Rod Operated Gate (Sluice) Valve (PLT), JIS 10K, NB 300 mm, Body: Cast iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 217.0 3.18 Supply, Crop and Renewal of Storm Valve, JIS 5K, NB 150 mm, Body: Cast Steel, Disc/Plug: Bronze, complete as specified in the Scope of Work. 26.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 218.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 219.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 220.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 221.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 222.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 223.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 224.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 225.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 226.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 227.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 32 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 228.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 229.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 230.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 231.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 232.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 233.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 234.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 235.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 236.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 237.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 238.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 239.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 240.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 241.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 242.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 243.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 244.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 245.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 246.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 247.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 248.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 16K, NB 250 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 249.0 3.22 Supply and Renewal of Air Vent Head, NB 50 mm, JIS 5K, Without Screen, Pipe Thickness: 3.8 mm, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 250.0 3.22 Supply and Renewal of Air Vent Head, NB 65 mm, JIS 5K, With Screen, Pipe Thickness: 4.2 mm, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 251.0 3.22 Supply and Renewal of Air Vent Head, NB 100 mm, JIS 5K, With Screen, Pipe Thickness: 4.5 mm, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 252.0 3.22 Supply and Renewal of Air Vent Head, NB 100 mm, JIS 5K, Without Screen, Pipe Thickness: 4.5 mm, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 253.0 3.22 Supply and Renewal of Air Vent Head, NB 200 mm, JIS 5K, Without Screen, Pipe Thickness: 5.8 mm, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 254.0 3.22 Supply and Renewal of Air Vent Head, NB 200 mm, JIS 5K, Without Screen, Pipe Thickness: 8.2 mm, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 255.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 256.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 257.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 258.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 259.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 260.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 261.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 262.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 263.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 264.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 265.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 266.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 267.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 268.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Cast Iron, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 269.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 270.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 271.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Cast Steel , complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 272.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 273.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat of Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 274.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 275.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 276.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 10K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 277.0 3.25 Supply, Crop and Renewal of Fire Monitor Valve, JIS 5K, NB 80 mm, Body: Cast Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 278.0 3.26 Supply, Crop and Renewal of Ball Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 279.0 3.27 Supply and Renewal of Water Jet Eductor, Tag No: WP-1, Model No: FC(BC)-ER-100, Dimension: 80 x 100 x125 mm, Model: FC(BC)-ER-100, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 280.0 3.27 Supply and Renewal of Water Jet Eductor for Spud Can, JIS 10K, Model No: FC(BC)-ER-80, Dimension: 65x80x100 mm, Model: FC(BC)-ER-80, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 281.0 3.27 Supply and Renewal of Water Jet Eductor, Tag No: WP-123, Model No: BC-S4B, Dimension: 32x32x40 mm, Model: BC-S4B, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 282.0 3.28 Supply and Renewal of Deck Stand & Reach Rod Mechanism (Gate Valve Operation), Complete mechanism (Gate Valve + Swing Check + Deck Stand + Reach Rod), Gate/Swing Check: per individual valve schedule, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 283.0 3.29 Supply, Crop and Renewal of Self-Closing Valve (Fuel Oil Sounding Pipe), JIS 5K, NB 40 mm, Body: Cast Bronze, Disc: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 284.0 3.3 Supply, Crop and Renewal of Pneumatic-Operated Butterfly Valve (Diverter Flow Line), JIS 10K, NB 250 mm, Body: Ductile Iron (FCD450), Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 285.0 3.31 Supply, Crop and Renewal of Air Reducing Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Plug: Stainless Steel, Diaphragm: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 286.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 3000K, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 287.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 50 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 288.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 289.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 125 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 290.0 3.33 Supply, Crop and Renewal of Pressure Safety Valve (High Pressure), JIS 5000 psiK, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 291.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 40 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 292.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 50 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 18.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 293.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 65 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 294.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 80 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 295.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 100 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 91.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 296.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 125 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 297.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 602, NB 50 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 298.0 3.34 Supply and Renewal of Victaulic Coupling, NB 50 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 27.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 299.0 3.34 Supply and Renewal of Victaulic Coupling, NB 80 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 300.0 3.34 Supply and Renewal of Victaulic Coupling, NB 125 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 105.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 301.0 3.34 Supply and Renewal of Camlock Coupling, NB 50 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 302.0 3.34 Supply and Renewal of Camlock Coupling, NB 65 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 303.0 3.34 Supply and Renewal of Camlock Coupling, NB 80 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 304.0 3.34 Supply and Renewal of Camlock Coupling, NB 125 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 305.0 3.34 Supply and Renewal of Dresser Coupling, NB 80 mm, Material: ASTM A516 Gr.70 / ASTM A53, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 306.0 3.34 Supply and Renewal of Dresser Coupling, NB 250 mm, Material: ASTM A516 Gr.70 / ASTM A53, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 307.0 4.1 Updating of Stability Manuals, Booklets, Plans and Associated Documentation, complete as per Scope of work 1.0 AU 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 308.0 4.2 Supply, Removal/Renewal and Installation of Electrical Cabling and Associated Electrical Works inside Accommodation complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 309.0 4.2 Design, Supply, Fabrication and Installation of Porta Cabin complete with Accessories 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 310.0 5.1.1 Supply & Replacement of Wooden Panel Flooring for Jr. & Sr. Recreation room, Executive room, Conference Hall.Type of Wood: Burma Teak Wood 150.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 311.0 5.2.1 Supply & Replacement of Quarry tile on 30 mm thick cement to be Provided at Galley & Dry Provision floor. 165.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 312.0 5.2.2 Supply & Replacement of 2mm thick vinyl tile on 7mm thick latex type and 30mm thick insulation board (HI-HEAT BOARD) to be Provided at Junior & Senior mess and stair area. 100.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 313.0 5.2.3 Supply & Replacement of mosaic tile on 30 mm thick cement to be Provided at all Toilet and Laundry Room. 475.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 314.0 5.2.4 Supply & Replacement of 2mm thick Vinyl tile on 7mm thick latex type deck composition and 25mm thick rock wool with 20mm thick cement layer reinforced with expanded metal mesh and 20 SWG GI steel sheet flooring at main deck rooms and passage area. 60.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 315.0 5.2.5 Supply & Replacement of 2mm thick Vinyl tile on 7mm thick latex type deck composition Provided on floor at A, B, C deck rooms and passage area, foremen office. 650.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 316.0 5.3.1 Supply & Replacement of C- class overhead ceiling panel with 100 mm & 75mm glass wool insulation 310.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 317.0 5.3.2 Supply & Replacement of overhead ceiling panel 650.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 318.0 5.3.3 Supply & Replacement of C-class ceiling panel with A-60 class 50 mm thick overhead insulation 130.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 319.0 5.3.4 Supply & Replacement of C- class ceiling panel with A-60 class 100 mm thick rock wool overhead insulation 60.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 320.0 5.4.1 Supply & Replacement of B-class Partition/Lining panels including 100 mm thick glass wool insulation. 3350.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 321.0 5.5.1 Supply & Replacement of fluorescent (photoluminescent) skirting of 50mm width at various locations of accommodation. 900.0 m 0.0 0.0 Chapter 5: Accomodation Jobs 322.0 5.5.2 Supply & Replacement of tile skirting of 100mm width on wall at galley and Jr. Sr. mess, laundry room. 95.0 m 0.0 0.0 Chapter 5: Accomodation Jobs 323.0 5.6.1 Supply of readymade Shoe Racks with hang helmet at upper area to be made in main deck 'A', 'B' and 'C' decks at exit points on port & starboard sides as per following: a) Shoe Rack for 'Main deck-0' DECK: Size 1850 x 1400 x 320 mm b) Shoe Rack for 'A' DECK: Size 1850x1200x320mm c) Shoe Rack for 'B' DECK: Size 1720 x 1120x 320 mm d) Shoe Rack for ''C' DECK: Size 1200 x 1000x 320 mm 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 324.0 5.7 Supply & Replacement of side wall, divisional wall, ceiling, flooring , insulation and doors at Freezer & Cooler Room 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 325.0 5.8.1.1 Supply & Replacement of B-15 class fire proof doors 41.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 326.0 5.8.1.2 Supply & Replacement of A-0 class fire proof doors 54.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 327.0 5.8.1.3 Supply & Replacement of C- class fire proof doors 16.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 328.0 5.8.1.4 Supply & Replacement of A-60 class fire proof doors 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 329.0 5.8.2.1 Supply & Replacement of weather tight doors 13.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 330.0 5.8.3.1 Supply & Replacement of water tight doors 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 331.0 5.8.4.1 Supply & Replacement of non-tight doors 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 332.0 5.8.5.1 Supply & Replacement of Gas tight doors 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 333.0 5.9.1 Supply & Replacement of side scuttles with frame. 17.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 334.0 5.9.2 Supply & replacement of square windows size 1000X650mm with frames. 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 335.0 5.9.3 Supply & replacement of square windows size 1800X800mm with frames. 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 336.0 5.9.4 Supply & replacement of square windows size 400X550mm with frames. 31.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 337.0 5.9.5 Supply & replacement of square windows size 750X600mm with frames. 11.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 338.0 5.9.6 Supply & replacement of square windows size 750X800mm with frames. 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 339.0 5.10.1 Supply and replacement of high quality Mirrors cabinet with compartments in bedrooms of all decks. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 340.0 5.11.1 Clocks- Supply and replacement of wall clocks in all bedrooms in 'A', 'B' & main decks, all Offices and both Messes. 60.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 341.0 5.12.1 Supply and replacement of dinning table size 3500mm (length) X 900mm (width) X 700mm (height) at Jr. & Sr. mess. 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 342.0 5.12.2 Supply and replacement of serving table size 800 X 500 X 850mm at lobby 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 343.0 5.12.3 Supply and replacement of book shelf size: 350 X 300 mm 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 344.0 5.13.1 Supply & Replacement of European style toilet and drainage system in 'A' and 'B' Decks. 9.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 345.0 5.13.2 Supply & Replacement of Indian style toilet and drainage system in 'A' and main- Decks. 8.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 346.0 5.14.1 Supply & Replacement of (A-type)wash basin with drainage system in B-Deck. 6.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 347.0 5.14.2 Supply & Replacement of (B-type) wash basin with drainage system in B-Deck. 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 348.0 5.14.3 Supply & Replacement of (C-type) wash basin with drainage system in A-Deck. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 349.0 5.14.4 Supply & Replacement of (D-type)wash basin with drainage system in A-Deck, Main- Decks. 11.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 350.0 5.14.5 Supply & Replacement of (E-type)wash basin with drainage system in A, B and Main Deck. 7.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 351.0 5.14.6 Supply & Replacement of (F-type)wash basin with drainage system in Aux. machine room. 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 352.0 5.15.1 Supply & Replacement of (B-type) Hand basin with drainage system in Mud pit rom, sand trap space. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 353.0 5.15.2 Supply & Replacement of (C-type) Hand basin with drainage system at Jack House Top (FORE). 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 354.0 5.16.1 Supply & Replacement of (A-type ) Urinal with drainage system at Jack House Top (FORE). 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 355.0 5.16.2 Supply & Replacement of (B-type ) Urinal with drainage system at A-Deck, Main-Deck common toilet. 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 356.0 5.17.1 Supply & Replacement of massage type shower with drainage system at 'A', 'B', deck . 7.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 357.0 5.17.2 Supply & Replacement of telephone type shower with drainage system in 'A', 'B', deck. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 358.0 5.17.3 Supply & Replacement of Fixed type shower with drainage system in 'A', 'B', deck. 8.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 359.0 5.18.1 Supply & Replacement of sofa size: 2200 X 780 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 360.0 5.18.2 Supply & Replacement of sofa size: 1900 X 700 X 800mm 25.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 361.0 5.18.3 Supply & Replacement of sofa size: 1750 X 700 X 800mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 362.0 5.18.4 Supply & Replacement of sofa size: 2110 X 500 X 770mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 363.0 5.18.5 Supply & Replacement of sofa size: 1550 X 780 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 364.0 5.18.6 Supply & Replacement of sofa size: 1500 X 700 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 365.0 5.18.7 Supply & Replacement of sofa size: 1400 X 700 X 800mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 366.0 5.18.8 Supply & Replacement of sofa size: 1310 X 500 X 690mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 367.0 5.18.9 Supply & Replacement of sofa size: 1300 X 700 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 368.0 5.19.1 Supply & Replacement of Easy Chair (A) size: 690 X 650 X 630mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 369.0 5.19.2 Supply & Replacement of Easy Chair (B) size: 760 X 710 X 660mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 370.0 5.19.3 Supply & Replacement of Easy Chair (C) size: 750 X 830 X 780mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 371.0 5.19.4 Supply & Replacement of Arm Chair (A) size: 440 X 573 X 780mm 55.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 372.0 5.19.5 Supply & Replacement of Arm Chair (B) size: 510 X 540 X 745mm 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 373.0 5.19.6 Supply & Replacement of Revolving Arm Chair size: 580 X 580 X 750-830mm 14.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 374.0 5.19.7 Supply & Replacement of Revolving High Stool size: 370 X 400 X 800-1000mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 375.0 5.19.8 Supply & Replacement of Revolving Mess Chair size: 385 X 390 X 810mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 376.0 5.19.9 Supply & Replacement of Folding Chair size: 535 X 486 X 765mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 377.0 5.19.10 Supply & Replacement of Easy Chair size: 690 X 700 X 720mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 378.0 5.20.1 Supply and replacement of new table with drawers size 600 X 450 X 740mm 18.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 379.0 5.20.2 Supply and replacement of new table with drawers size 1000 X 600 X 740mm 15.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 380.0 5.20.3 Supply and replacement of new table with drawers size 1200 X 700 X 740mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 381.0 5.20.4 Supply and replacement of new table with drawers size 1000 X 700 X 740mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 382.0 5.20.5 Supply and replacement of new table with drawers size 1600 X 700 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 383.0 5.20.6 Supply and replacement of new table with drawers size 1100 X 700 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 384.0 5.20.7 Supply and replacement of new table with drawers size 1200 X 650 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 385.0 5.21.1 Supply and replacement of 2-tier Bed with locker size 2000 X 900 X 1700mm 25.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 386.0 5.21.2 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 2-tier beds for replacement of damaged drawers 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 387.0 5.21.3 Supply and replacement of 1-tier Bed with locker size 2000 X 800 X 1700mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 388.0 5.21.6 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 1 tire beds for replacement of damaged drawers 8.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 389.0 5.21.4 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 1 tire beds for replacement of damaged drawers 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 390.0 5.21.5 Supply and replacement of 1-tier Bed with locker size 2000 X 900 X 850mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 391.0 5.22.1 Supply and replacement of wardrobe size 2100 X 600mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 392.0 5.22.2 Supply and replacement of wardrobe size 2100 X 900mm 35.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 393.0 5.22.3 Supply and replacement of jumper locker size 1790 X 900mm 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 394.0 5.22.4 Supply and replacement of jumper locker size 1790 X 608mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 395.0 5.22.5 Supply and replacement of Filling Cabinet size 675 X 456mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 396.0 5.22.6 Supply and replacement of Book Case size 700 X 600mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 397.0 5.22.7 Supply and replacement of filing cabinet size 1319 X 456mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 398.0 5.22.8 Supply and replacement of locker size 1790 X 880mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 399.0 5.22.9 Supply and replacement of bench with drawer size 1635 X 600 mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 400.0 5.22.10 Supply and replacement of bench with drawer size 1100 X 600mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 401.0 5.22.11 Supply and replacement of bench with locker size 1600 X 915mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 402.0 5.22.12 Supply and replacement of shoes locker size 1522 X 415 X 930mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 403.0 5.22.13 Supply and replacement of shoes locker size 1032 X 415 X 930mm 5.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 404.0 5.23 Supply and fitting of all plumbing fixtures in all bathrooms 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 405.0 5.24 Supply and replacement of Bed and table LED lights & lamps in A, B, main Deck Accommodation Rooms 104.0 Sets 0.0 0.0 Chapter 5: Accomodation Jobs 406.0 5.25 Supply and replacement of 220V AC supply sockets location at every tables and beds. 150.0 Sets 0.0 0.0 Chapter 5: Accomodation Jobs 407.0 5.26 Supply and replacement of Mattress with cover. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 408.0 5.27 Supply and replacement of Pillow with cover. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 409.0 5.28.1 Supply and replacement of bedsheet in all accommodation beds 200.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 410.0 5.28.2 Supply and replacement of blankets with cover in all accommodation beds 200.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 411.0 5.29 Supply and replacement of Ladder in living quarter at main deck, A, B, C-Decks 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 412.0 5.3 Supply and replacement of IMO Signage Name plate and caution plate in all location on the rig. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 413.0 6.1 Supply & Retrofit Replacement of Existing 40 MT BOP Lifting System with New 50 MT Cumulative Capacity BOP Lifting System 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 414.0 6.2 Supply & Retrofit Replacement of Existing Choke & Kill Manifold with New Choke & Kill Manifold System, 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 415.0 6.3 Supply & Retrofit Replacement of Existing Shale Shaker Units with New Shale Shaker Units – 1 AU comprising 03 Nos. Shale Shakers 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 416.0 6.4 Supply & Retrofit Replacement of Existing Halon 1301 Fixed Fire-Fighting System with New CO₂ Total Flooding Fixed Fire-Fighting System 2078.0 m³ 0.0 0.0 Chapter 6: Upgradation of Existing System 417.0 6.5 Supply & Retrofit Replacement of Existing Emergency Generator System with New Emergency Generator and Associated Emergency Power System 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 418.0 6.6 Supply & Retrofit Replacement of Existing 60 TR Marine HVAC System with Complete New 80 TR Marine HVAC System-Equipment Replacement, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 419.0 6.6 Supply & Retrofit Replacement of Existing 60 TR Marine HVAC System with Complete New 80 TR Marine HVAC System-Ducting Side Replacement, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 420.0 6.7 Supply & Retrofit Replacement of Existing Fire Alarm System (FAS) and General Alarm (GA) System with Complete New FAS & GA System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 421.0 6.8 Supply & Retrofit Replacement of Existing Air Dryer System with Complete New Air Dryer System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 422.0 6.9 Dismantling of Raw Water Tower, completed as per scope of work 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 423.0 6.9 Supply, Installation, Testing & Commissioning of Hose Reel System, complete as per Scope of Work. 3.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 424.0 6.1 Refurbishment of VFD House of TDS 11 SA, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 425.0 7.1 Supply & Retrofit Replacement of Monkey Board Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 426.0 7.2 Supply & Retrofit Replacement of Rig Floor Air Winch, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 427.0 7.2 Supply & Retrofit Replacement of Texas Deck Air Winch, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 428.0 7.3 Supply & Retrofit Replacement of Stabbing Board Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 429.0 7.4 Supply & Retrofit Replacement of Man-Rider Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 430.0 7.5 Supply & Retrofit Replacement of Jetting Air Winch, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 431.0 7.6 Supply & Retrofit Replacement of Bridle Chain Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 432.0 7.7 Supply & Retrofit Replacement of Burner Boom Air Winch, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 433.0 7.8 Supply & Retrofit Replacement of Casing Tong, size range 4\\" to 13-3/8\\", complete with accessories as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 434.0 7.9 Supply & Retrofit Replacement of Tubing Tong, size range 2-3/8\\" to 4-1/2\\", complete with accessories as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 435.0 7.1 Supply & Retrofit Replacement of Liner Cooling Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 436.0 7.11 Supply & Retrofit Replacement of Bilge Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 437.0 7.12 Supply & Retrofit Replacement of Sanitary Water Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 438.0 7.13 Supply & Retrofit Replacement of Raw Water Pump Sets complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 439.0 7.14 Supply & Retrofit Replacement of Drawworks Brake Cooling Pump Sets & Heat Exchanger, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 440.0 7.15 Supply & Retrofit Replacement of Fire Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 441.0 7.16 Supply & Retrofit Replacement of Bilge Ballast Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 442.0 7.17 Supply & Retrofit Replacement of Base Oil (SOBM) Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 443.0 7.18 Supply & Retrofit Replacement of Super Charger Pump Set with Motor, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 444.0 7.19 Supply & Retrofit Replacement of Trip Tank Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 445.0 7.2 Supply & Retrofit Replacement of Mud Mixing Pump Set with Motor, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 446.0 7.21.1 Supply & Retrofit Replacement of Desander Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 447.0 7.21.2 Supply & Retrofit Replacement of Desilter Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 448.0 7.21.3 Supply & Retrofit Replacement of SOBM Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 449.0 7.22 Supply & Retrofit Replacement of Hot Water System (Electric Water Heater), complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 450.0 7.23 Supply & Retrofit Replacement of Fresh Water Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 451.0 7.24 Supply & Retrofit Replacement of Hot Water Circulation Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 452.0 7.24 Supply & Installation of Additional Hot Water Circulation Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 453.0 7.25.1 Supply & Retrofit Replacement of Diesel Oil Transfer Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 454.0 7.25.2 Supply & Retrofit Replacement of Lube Oil Pump Set – Main Deck (Port Side), complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 455.0 7.25.3 Supply & Retrofit Replacement of Lube Oil Pump Set – Aux. Machinery Room Port Side & Engine Room, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 456.0 7.26 Supply & Retrofit Replacement of Water Maker, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 457.0 7.27 Supply & Retrofit Replacement of Rig Service Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 458.0 7.28.1 Supply & Retrofit Replacement of Substructure Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 459.0 7.28.2 Supply & Retrofit Replacement of Cold Start Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 460.0 7.29 Supply & Retrofit Replacement of Pneumatic Bilge Pump, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 461.0 7.3 Supply of Pneumatic Grease Pump – 20 kg Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 462.0 7.3 Supply of Pneumatic Grease Pump – 50 kg Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 463.0 7.31 Supply & Retrofit Replacement of Pneumatic Angle Grinder, 90 PSI, 4\\" Wheel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 464.0 7.32 Supply & Retrofit Replacement of Pneumatic Impact Wrench, 1250–1400 ft-lb, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 465.0 7.33 Supply & Retrofit Replacement of Pipe Spinner, 1250 ft-lb, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 466.0 7.34 Supply & Retrofit Replacement of Mud Agitator Unit with Motor – 20 HP, 46\\" Impeller, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 467.0 7.34 Supply & Retrofit Replacement of Mud Agitator Unit with Motor – 10 HP, 28\\" Impeller, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 468.0 7.35 Supply & Retrofit Replacement of Burner Boom, complete as specified in the Scope of Work. 2.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 469.0 7.36 Supply & Retrofit Replacement of BOP Accumulator Unit and Control System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 470.0 7.37 Supply & Retrofit Replacement of Crane Load Indication System, complete as specified in the Scope of Work. 3.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 471.0 7.38 Supply & Retrofit Replacement of Barge Instrumentation System (BIS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 472.0 7.39 Supply & Retrofit Replacement of Gas Detection System (GDS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 473.0 7.4 Supply & Retrofit Replacement of Marine Growth Prevention System (MGPS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 474.0 7.41 Supply & Retrofit Replacement of Hydraulic Torque Wrench, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 475.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 1 Core × 325 mm², complete as specified in the Scope of Work. 4400.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 476.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 1.25 mm², complete as specified in the Scope of Work. 1240.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 477.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 2 mm², complete as specified in the Scope of Work. 7560.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 478.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 3.5 mm², complete as specified in the Scope of Work. 700.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 479.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 2 mm², complete as specified in the Scope of Work. 6380.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 480.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 3.5 mm², complete as specified in the Scope of Work. 7780.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 481.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 4 mm², complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 482.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 5 mm², complete as specified in the Scope of Work. 2000.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 483.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 5.5 mm², complete as specified in the Scope of Work. 880.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 484.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 8 mm², complete as specified in the Scope of Work. 1070.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 485.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 14 mm², complete as specified in the Scope of Work. 1490.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 486.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 22 mm², complete as specified in the Scope of Work. 250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 487.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 30 mm², complete as specified in the Scope of Work. 60.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 488.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 38 mm², complete as specified in the Scope of Work. 250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 489.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 50 mm², complete as specified in the Scope of Work. 600.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 490.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 80 mm², complete as specified in the Scope of Work. 160.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 491.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 100 mm², complete as specified in the Scope of Work. 155.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 492.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 125 mm², complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 493.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 5 Core × 1.25 mm², complete as specified in the Scope of Work. 760.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 494.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 6 Core × 14 mm², complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 495.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 7 Core × 1.5 mm², complete as specified in the Scope of Work. 150.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 496.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 7 Core × 2 mm², complete as specified in the Scope of Work. 700.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 497.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 12 Core × 1.25 mm², complete as specified in the Scope of Work. 1160.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 498.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 12 Core × 1.5 mm², complete as specified in the Scope of Work. 80.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 499.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 20 Core × 3.5 mm², complete as specified in the Scope of Work. 1250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 500.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 23 Core × 1.25 mm², complete as specified in the Scope of Work. 1060.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 501.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 23 Core × 1.5 mm², complete as specified in the Scope of Work. 100.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 502.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 33 Core × 1.5 mm², complete as specified in the Scope of Work. 140.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 503.0 7.43 Supply & Retrofit Replacement of Weatherproof Push Button Station, complete as specified in the Scope of Work. 51.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 504.0 7.43 Supply & Retrofit Replacement of Explosion-Proof Push Button Station, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 505.0 7.44 Supply & Retrofit Replacement of Appleton Plug for Hazardous Location, Watertight, Cat. No. ECP-20232, complete as specified in the Scope of Work. 100.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 506.0 7.44 Supply & Retrofit Replacement of Appleton Receptacle Socket/Receptacle Interlocked with Switch for Hazardous Location, 2-Way Cable, Cat. No. EFSC175-20232, complete as specified in the Scope of Work. 60.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 507.0 7.44 Supply & Retrofit Replacement of Appleton Receptacle with Two Sockets/Receptacle Interlocked with Switch for Hazardous Location, 4-Way Cable, Cat. No. EFSC175-20232, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 508.0 7.44 Supply & Retrofit Replacement of Receptacle with Switch, Japanese Make, Type S1M, 3P, 250 V, 10 A, IP56, complete as specified in the Scope of Work. 150.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 509.0 7.44 Supply & Retrofit Replacement of 3-Pin Receptacle, 250 V, 10 A, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 510.0 7.44 Supply & Retrofit Replacement of 3-Pin Plug, 250 V, 10 A, complete as specified in the Scope of Work. 150.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 511.0 7.44 Supply & Retrofit Replacement of On-Off Selector Switch, Japanese Make, 250 V, 10 A, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 512.0 7.44 Supply & Retrofit Replacement of SS Enclosure Box for Weatherproof Receptacles, 300 × 200 × 220 mm, with Hinged Door and Locking Mechanism, complete as specified in the Scope of Work. 25.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 513.0 7.44 Supply & Retrofit Replacement of Junction Box, 2 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 60.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 514.0 7.44 Supply & Retrofit Replacement of Junction Box, 3 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 515.0 7.44 Supply & Retrofit Replacement of Junction Box, 4 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 90.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 516.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for Generator, 1600 A, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 517.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for SCR, 1600 A, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 518.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for VFD House, 1600 A, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 519.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for TDS, 1600 A, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 520.0 7.46 Supply & Retrofit Replacement of Lighting Distribution Panel, 1200 × 500 × 500 mm, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 521.0 7.46 Supply & Retrofit Replacement of Lighting Distribution Panel, 800 × 600 × 500 mm, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 522.0 7.46 Supply & Retrofit Replacement of MCB, 20 A, for Lighting Distribution Panel, complete as specified in the Scope of Work. 24.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 523.0 7.46 Supply & Retrofit Replacement of MCB, 15 A, for Lighting Distribution Panel, complete as specified in the Scope of Work. 61.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 524.0 7.46 Supply & Retrofit Replacement of Contactor, 110 V Coil, 60 Hz, for Lighting Distribution Panel, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 525.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 280 × 200 × 230 mm, MS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 526.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 300 × 130 mm, SS, 6-Way, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 527.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 260 × 600 × 130 mm, SS, 18-Way, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 528.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 260 × 400 × 130 mm, SS, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 529.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 530 × 400 × 250 mm, SS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 530.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 800 × 600 × 300 mm, MS with Hinged Locking Door, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 531.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 750 × 360 × 230 mm, MS with Hinged Locking Door, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 532.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 280 × 410 × 130 mm, MS, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 533.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 330 × 270 × 230 mm, MS, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 534.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 480 × 320 × 230 mm, MS, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 535.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 320 × 140 mm, MS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 536.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 490 × 430 × 230 mm, SS, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 537.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 320 × 140 mm, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 538.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 270 × 320 × 230 mm, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 539.0 7.47 Supply & Retrofit Replacement of Welding Junction Box with Positive and Negative Plug & Socket, 400 A, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 540.0 7.47 Supply & Retrofit Replacement of Welding Junction Box with Positive and Negative Plug & Socket, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 541.0 7.48 Supply & Retrofit Replacement of Group Starter Panels and ESB Panel in Pump Room, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 542.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 6\\" Width, complete as specified in the Scope of Work. 75.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 543.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 8\\" Width, complete as specified in the Scope of Work. 75.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 544.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 10\\" Width, complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 545.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 12\\" Width, complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 546.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 24\\" Width, complete as specified in the Scope of Work. 450.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 547.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 30\\" Width, complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 548.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Hazardous Area, complete as specified in the Scope of Work. 75.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 549.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Non-Hazardous Area, complete as specified in the Scope of Work. 48.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 550.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Weatherproof, complete as specified in the Scope of Work. 70.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 551.0 7.5 Supply & Retrofit Replacement of Marine Linear LED Light – 4 ft, Hazardous Area, complete as specified in the Scope of Work. 180.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 552.0 7.5 Supply & Retrofit Replacement of Marine LED Light for Accommodation Interior/Exterior – Weatherproof, complete as specified in the Scope of Work. 400.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 553.0 7.5 Supply & Retrofit Replacement of Marine Linear LED Light – 2 ft, Non-Hazardous Area, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 554.0 7.5 Supply & Retrofit Replacement of Marine Pendant LED Area Light – Hazardous Area, complete as specified in the Scope of Work. 25.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 555.0 7.5 Supply & Retrofit Replacement of Marine Pendant LED Area Light – Non-Hazardous Area, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 556.0 7.5 Supply & Retrofit Replacement of Marine Explosion-Proof Hand Lamp, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 557.0 7.52 Supply & Retrofit Replacement of Electric Hoists comprising 02 Nos. 2-Ton Hoists for Sack Storage/Heavy Drill Store and 01 No. 5-Ton Explosion-Proof Underhung Crane/Hoist at Main Deck, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 558.0 7.52 Supply & Installation of Additional 5-Ton Explosion-Proof Electric Hoist – Mud Pump Room, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 559.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 20 m³/min, 400 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 560.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 30 m³/min, 450 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 561.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 550 m³/min, 1100 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 562.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 550 m³/min, 1100 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 563.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 650 m³/min, 1100 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 564.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 700 m³/min, 2600 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 565.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 1050 m³/min, 1500 mm Dia., Static Pressure 50 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 566.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 1100 m³/min, 1300 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 567.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 8 m³/min, Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 568.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 30 m³/min, 450 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 569.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 60 m³/min, 550 mm Dia., Static Pressure 45 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 570.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 70 m³/min, 450 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 571.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 150 m³/min, 550 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 572.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 200 m³/min, 600 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 573.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 300 m³/min, 700 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 574.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 350 m³/min, 800 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 575.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 450 m³/min, 1000 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 576.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 500 m³/min, 1000 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 577.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 500 m³/min, 1000 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 578.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 700 m³/min, 2600 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 579.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 1000 m³/min, 2600 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 580.0 7.54 Supply & Retrofit Replacement of SCR Control Room Cooling System, Marine HVAC, 10 TR, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 581.0 7.55 Supply & Retrofit Replacement of Air-Conditioning System for Doghouse, 4 TR Dual Packaged, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 582.0 7.56 Supply & Retrofit Replacement of Air-Conditioning Unit for Mud Lab, 5 TR Air-Cooled, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 583.0 7.57 Supply & Retrofit Replacement of Air-Conditioning System for Driller Cabin, 2 TR Dual Roof-Top, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 584.0 7.58 Supply & Retrofit Replacement of Air-Conditioning Unit for Crane, 1.5 TR Roof-Mounted, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 585.0 7.58 Supply & Retrofit replacement of Marine-Grade Panel AC Unit, 4000 BTU, for Crane, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 586.0 7.59 Supply & Retrofit Replacement of Air-Conditioning Unit for Electrical & Mechanical Store, 5 TR, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 587.0 7.6 Supply & Retrofit Replacement of Fresh Water Hydrophore Tank, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 588.0 7.6 Supply & Retrofit Replacement of Sanitary Hydrophore Tank, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 589.0 7.61 Supply & Retrofit Replacement of Sewage Treatment Plant (STP) Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 590.0 7.62 Supply & Retrofit Replacement of Upper Shock Pad, complete as specified in the Scope of Work. 18.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 591.0 7.63 Supply & Retrofit Replacement of Bottom Plug, complete as specified in the Scope of Work. 24.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 592.0 7.64 Supply & Retrofit Replacement of Electric Grinder, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 593.0 7.64 Supply & Retrofit Replacement of Bench Grinder, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 594.0 7.65 Supply & Retrofit Replacement of Weighing Machine, 200 kg Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 595.0 7.66 Supply & Retrofit Replacement of AC Motor, 0.20 to 20 kW, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 596.0 7.66 Supply & Retrofit Replacement of AC Motor, 120 to 200 kW, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 597.0 7.66 Supply & Retrofit Replacement of AC Motor with Magnetic Brake, 10 to 20 kW, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 598.0 7.67 Supply & Retrofit Replacement of Welding Machine and Revamping of Welding Distribution System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 599.0 7.68 Supply & Retrofit Replacement of Multi Cable Transit (MCT) System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 600.0 7.69 Supply & Retrofit Replacement of Industrial Washing Machine, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 601.0 7.69 Supply & Retrofit Replacement of Industrial Laundry Drying Machine, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 602.0 7.69 Supply & Retrofit Replacement of Laundry Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 603.0 7.69 Supply & Installation of Additional Laundry Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 604.0 7.7 Supply of Pneumatic Bilge Pump, Wilden 3\\" Pro-Flo Model PS 1520, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 605.0 7.7 Supply of Pneumatic Bilge Pump, Wilden 2\\" Pro-Flo Model PS 820, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 606.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 5\\", complete as specified in the Scope of Work. 32.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 607.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 4\\", complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 608.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 3\\", complete as specified in the Scope of Work. 48.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 609.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 2\\", complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 610.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 1\\", complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 611.0 7.72 Supply & Retrofit Replacement of High-Pressure Trip Tank & Hole Filling Hose, 35 ft × 2\\", 2000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 612.0 7.72 Supply & Retrofit Replacement of High-Pressure Rotary Hose, 75 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 613.0 7.72 Supply & Retrofit Replacement of High-Pressure Vibrating Mud Hose, 35 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 614.0 7.72 Supply & Retrofit Replacement of High-Pressure Vibrating Mud Hose, 45 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 615.0 7.72 Supply & Retrofit Replacement of High-Pressure Hose for Displacement Job, 50 ft × 2\\", 5000 PSI, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 616.0 7.72 Supply & Retrofit Replacement of High-Pressure Jetting Hose, 45 ft × 2-1/2\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 617.0 7.72 Supply & Retrofit Replacement of High-Pressure Rig Floor Cementing Hose, 30 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 618.0 7.72 Supply & Retrofit Replacement of High-Pressure Co-Flex Choke Line Hose, 50 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 619.0 7.72 Supply & Retrofit Replacement of High-Pressure Cementing Hose, 45 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 620.0 7.72 Supply & Retrofit Replacement of High-Pressure BOP Control Line Hose, 50 ft × 1\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 621.0 7.72 Supply & Retrofit Replacement of High-Pressure BOP Control Return Line Hose, 50 ft × 1-1/2\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 622.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Rig Floor Air Winch, 12-Ton Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 623.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Power Tong Counterweight, 8-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 624.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Man-Rider Air Winch, 8-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 625.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Fall Preventer Counterweight, 6-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 626.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Monkey Board Air Winch, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 627.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Aft Side Air Winch, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 628.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Make-Up Tong, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 629.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Drill Pipe Rack, 10-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 630.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for BHA Rack, 10-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 631.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Fall Preventer Counterweight, 8-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 632.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Texas Deck, 8-Ton Capacity, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 633.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Spider Guide, 4-Ton Capacity, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 634.0 7.75 Supply & Retrofit Replacement of Impressed Current Cathodic Protection (ICCP) System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 635.0 7.77 Supply & Retrofit Replacement of Towing Arrangements as per approved drawing, including installation, testing and certification, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 636.0 7.78 Supply & Retrofit Replacement of Diesel Oil (D.O.) Purifier Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 637.0 7.79 Supply & Retrofit Replacement of Bilge, Ballast & Fire Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 638.0 7.8 Supply & Retrofit Replacement of Degasser Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 639.0 7.82 Supply & Retrofit Replacement of Galley Equipment, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 640.0 7.83 Supply, Installation, Testing & Commissioning of New Gumbo Removal Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 641.0 7.84 Supply, Installation, Testing & Commissioning of New High-Pressure BOP Test Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 642.0 7.85 Supply & Retrofit Replacement of Complete Strainer Body with Strainer Element, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 643.0 7.86 Supply & Retrofit Replacement of Sprinkler Nozzles, complete as specified in the Scope of Work. 300.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 644.0 7.88 Supply & Retrofit Replacement of Weatherproof Exit Light, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 645.0 7.88 Supply & Retrofit Replacement of Explosion-Proof Exit Light, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 646.0 7.89 Supply & Retrofit Replacement of Weatherproof Emergency Light, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 647.0 7.89 Supply & Retrofit Replacement of Explosion-Proof Emergency Light, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 648.0 7.9 Supply & Retrofit Replacement of Booster Heater, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 649.0 7.91 Supply & Retrofit Replacement of HPU Unit of Iron Roughneck, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 650.0 7.92 Supply & Retrofit Replacement of Jet Pump Set, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 651.0 7.93 Supply & Retrofit Replacement of Bench Vice, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 652.0 7.94 Supply & Retrofit Replacement of Foldable Cellar Deck, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 653.0 7.95 Revamping of Jacking Motors’ Overload Control System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 654.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 0 to 5 KW, complete as per Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 655.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 6 to 10 KW, complete as per Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 656.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 11 to 15 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 657.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 16 to 40 KW, complete as per Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 658.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 41 to 60 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 659.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 61 to 100 KW, complete as per Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 660.0 8.2 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors with Magnetic Brake Assembly- 10-20 KW, complete as per Scope of Work. 46.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 661.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 0 to 5 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 662.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 6 to 20 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 663.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 21 to 50 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 664.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 51 to 150 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 665.0 8.3 Rewinding of the general three phase induction motors with magnetice braking all over the vessel may be considered for the following motors- 10-20 KW 5.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 666.0 8.4 Removal, Overhauling, Reinstallation, Testing & Commissioning of Climbing Pinion Assembly and Reduction Gear Box Assembly of the Jacking System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 667.0 8.5 Removal, Overhauling, Reinstallation, Testing & Commissioning of Cantilever and Substructure Skidding Units with Gearboxes, complete as per Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 668.0 8.6 Removal, Overhauling and Installation Testing and Commissioning of complete SOBM System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 669.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Up to 20 kVA, complete as specified in the Scope of Work 5.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 670.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 20 kVA and up to 50 kVA, complete as specified in the Scope of Work 6.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 671.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 50 kVA and up to 100 kVA, complete as specified in the Scope of Work 4.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 672.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 100 kVA and up to 1500 kVA, complete as specified in the Scope of Work 2.0 Nos. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 673.0 9.1 Supply and Retrofit Replacement of Mud Pit Fixed Foam Station, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 674.0 9.2 Supply and Retrofit Replacement of Mud Pit Fixed DCP Skid System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 675.0 9.3 Supply and Retrofit Replacement of Helideck Fixed Foam System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 676.0 9.4 Supply & Retrofit Replacement of Windsock complete with SS 316 Rotating Frame and associated mounting arrangement, complete as specified in the Scope of Work. 9.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 677.0 9.4 Supply & Retrofit Replacement of Helideck Net, complete with securing/fastening arrangement, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 678.0 9.4 Supply & Retrofit Replacement of Cargo Net – 12 ft × 12 ft, 6-inch mesh, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 679.0 9.4 Supply & Retrofit Replacement of Cargo Net – 12 ft × 12 ft, 4-inch mesh, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 680.0 9.4 Supply & Retrofit Replacement of Embarkation Ladder – 33 m length, complete with securing arrangement and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 681.0 9.4 Supply & Retrofit Replacement of 5 kg Portable CO₂ Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 682.0 9.4 Supply & Retrofit Replacement of 6.8 kg Wheeled CO₂ Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 23.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 683.0 9.4 Supply & Retrofit Replacement of 18 kg Wheeled CO₂ Fire Extinguisher, complete with hose, discharge nozzle and accessories, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 684.0 9.4 Supply & Retrofit Replacement of 5 kg Portable DCP Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 18.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 685.0 9.4 Supply & Retrofit Replacement of 9 L Portable Foam Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 19.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 686.0 9.4 Supply & Retrofit Replacement of 45 kg Wheeled DCP Fire Extinguisher, complete with trolley, 4 m × 1-inch hose/hose reel, discharge nozzle and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 687.0 9.4 Supply & Retrofit Replacement of 45 kg Wheeled DCP Fire Extinguisher, complete with trolley, 16 m × 1.25-inch hose/hose reel, nitrogen operating cylinder, discharge nozzle and accessories, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 688.0 9.4 Supply & Retrofit Replacement of 50 L Wheeled Foam Fire Extinguisher, complete with trolley, 4 m × 1-inch hose/hose reel, discharge nozzle and accessories, complete as specified in the Scope of Work. 3.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 689.0 9.4 Supply & Retrofit Replacement of 63 mm × 20 m Fire Hose with instantaneous quick couplings at both ends, complete with Stainless Steel Fire Hose Box, structural supports/brackets and associated accessories, complete as specified in the Scope of Work. 27.0 Set 0.0 0.0 Chapter 9: Replacement of LSA and FFA 690.0 9.4 Supply & Retrofit Replacement of 65 mm × 20 m Fire Hose for Air-Foam Service with instantaneous quick couplings at both ends, complete with Stainless Steel Fire Hose Box, structural supports/brackets and associated accessories, complete as specified in the Scope of Work. 2.0 Set 0.0 0.0 Chapter 9: Replacement of LSA and FFA 691.0 9.5 Supply, installation, testing, certification and commissioning (SITCC) of life boat and davit (launching appliances), complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 10: Renewal of Helicopter Deck 692.0 10.0 Renewal of Helicopter Deck, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 11: Surface Preparation & Painting 693.0 11.0 Surface Preparation- Fresh Water Wash-FWW 90710.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 694.0 11.0 Surface Preparation- Chemical Cleaning-CC 102372.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 695.0 11.0 Surface Preparation- Chipping / Scraping (CH/SCR) 19440.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 696.0 11.0 Surface Preparation- HB at main deck area- High pressure Hydro Blasting upto 35000 to 40000 PSI 2040.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 697.0 11.0 Surface Preparation- HB at Leg- High pressure Hydro Blasting upto 35000 to 40000 PSI 12134.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 698.0 11.0 Surface Preparation- FW wash/FW Hosing down Or FW Mop up (for interiors) after 1st coat. (HD) 93360.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 699.0 11.0 Surface Preparation- HPFWW at Derick 3600.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 700.0 11.0 Surface Preparation- HPFIWW at oil tanks 1260.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 701.0 11.0 Surface Preparation- Power Brushing / Buffing (PB) 20568.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 702.0 11.0 Surface Preparation- Grit Blasting to Sa 2 1/2 standard (SB) 78277.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 703.0 11.0 Surface Preparation- Scraping 12710.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 704.0 11.0 Procurement, supply and application of 2 pack Acrylic Aliphatic Polyurethane Finish (AAPU) 13319.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 705.0 11.0 Procurement, supply and application of Alkyd finish coat 8730.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 706.0 11.0 Procurement, supply and application of Chlorinated Rubber Finish Paint (CRF/P) 3600.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 707.0 11.0 Procurement, supply and application of 2 pack HB Polyamine adduct cured coal tar epoxy coating (CTEP) 87641.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 708.0 11.0 Procurement, supply and application of Recoatable epoxy (EPICON) 1860.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 709.0 11.0 Procurement, supply and application of 2 pack Epoxy Tie Coat (ETC) 19214.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 710.0 11.0 Procurement, supply and application of 2 pack Glass Flake Reinforced Epoxy (GFRE) 24026.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 711.0 11.0 Procurement, supply and application of 2 pack High Build Epoxy Coating - Aluminium/Coloured. (HBEPC) 55261.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 712.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy HB Primer Aluminium content max. 10 % (PEAPR) 86128.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 713.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy for Potable Water Tanks (PEPW) 840.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 714.0 11.0 Procurement, supply and application of 2 pack High Build Pure Epoxy with unlimited max recoating Interval (PEUR) 57370.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 715.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy Recoatable Coating with MIO pigment HR (PEURM) 1608.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 716.0 11.0 Procurement, supply and application of Top Grade SPC suitable for 60 months dd interval (TGSPG60) 25214.0 m² 0.0 0.0 Chapter 12: New Technology 717.0 12.0 Supply & Retrofit Replacement of Existing Battery Banks with LTO Battery Banks, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 718.0 13.1 Supply and Retrofit Replacement of Manholes, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 719.0 13.2 Supply and Retrofit Replacement of Hatch, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 720.0 13.3 Supply and Retrofit Replacement of Scupper Drain, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 14: Infocom Jobs 721.0 14.1 Supply & Retrofit Replacement of IP Based ATEX Phone, complete as per Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 722.0 14.2 Supply & Retrofit Replacement of License Free Walkie Talkies with battery charger, complete as per Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 723.0 14.3 Supply & Retrofit Replacement of Docking Station for INMARSAT Phone, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 724.0 14.4 Supply & Retrofit Replacement of Soft VC Equipment with Industry Grade Laptop, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 725.0 14.5 Supply & Retrofit Replacement of Colour Multi-Functional Device, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 726.0 14.6 Supply & Retrofit Replacement of Mono-Multi-Function Devices, complete as per Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 727.0 14.7 Supply & Retrofit Replacement of All-in-one Desktops, complete as per Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 728.0 14.8 Supply & Retrofit Replacement of Television Sets, complete as per Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 729.0 14.9 Supply & Retrofit Replacement of 65 Inch Interactive Display, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 730.0 14.10.1 Supply & Retrofit Replacement of Instrumentation Cables- 12 Pair, 24 core, 1 SQ mm Instrumentation Cables, complete as per Scope of Work. 500.0 m 0.0 0.0 Chapter 14: Infocom Jobs 731.0 14.10.2 Supply & Retrofit Replacement of Instrumentation Cables- 1 Pair, 2 core, 1 SQ mm Instrumentation Cables, complete as per Scope of Work. 500.0 m 0.0 0.0 Chapter 14: Infocom Jobs 732.0 14.10.3 Supply & Retrofit Replacement of Instrumentation Cables- LAN/Comm. Cables (CAT 6), complete as per Scope of Work. 3000.0 m 0.0 0.0 Total Basic amount INR 0.0 0.0 USD % of Local Content [prices for goods, works, or services including Indian Agent Commission sourced in India] For foreign bidders in % % of Import Content (for Indian bidders) in % Sr. No. Notes to Price Format |
| 4 | GST Input Tax Credit: The Bidder shall consider the benefit of eligible Input Tax Credit (ITC) available under the applicable GST regime while arriving at the quoted rates/prices and shall pass on such benefit while quoting. |
| 5 | Taxes, Duties and Levies: The quoted rates/prices shall be inclusive of all applicable taxes, duties, levies, cess and other statutory charges applicable to the Contract, except GST wherever required to be indicated separately in the Price Format. |
| 6 | Study of Contract Documents: The Bidder shall thoroughly study the Scope of Work, Technical Specifications, Special Conditions of Contract, Price Format and all other applicable Contract documents before submission of the offer. The quoted rates/prices shall be deemed to have been arrived at after considering all requirements stipulated therein. |
| 7 | Applicable GST - The Bidder should quote the GST, clearly indicating the rate and the amount of GST included in the bid and the description of the respective service (as per GST rules) under which the GST is payable. |
| 8 | Scope of Quoted Rates: Unless specifically identified as separately payable in the Price Format, the quoted rates/prices shall include all engineering/design, manpower, supervision, materials, consumables, tools, tackles, plant, machinery, equipment, transportation, handling, loading/unloading, shifting, temporary arrangements, testing, inspection, certification, commissioning, documentation and all incidental/ancillary activities necessary for complete and satisfactory execution of the respective work. |
| 9 | Indicative Quantities: Quantities indicated against the unit-rate items in the Price Format are indicative/estimated and have been provided for bid evaluation purposes only. Such quantities shall not be construed as guaranteed or final quantities to be executed under the Contract. Payment shall be made based on the actual quantities satisfactorily executed, measured and duly certified by ONGC, at the respective accepted unit rates, in accordance with the applicable provisions of the Contract. |
| 10 | Material Wastage: The Bidder shall consider material wastage, cutting/fabrication allowances and other applicable wastage while arriving at the quoted rates. No separate payment shall be admissible for such wastage. Payment shall be based on the actual measurable quantity of completed work. |
| 11 | Each Price Format item shall be read in conjunction with the corresponding Scope of Work, Technical Specifications, drawings and other Contract requirements. Any material, component, accessory, service or incidental activity necessary for complete and satisfactory execution of an item shall be deemed included in the quoted rate unless specifically identified as separately payable in the Price Format. |
| 12 | HVAC Upgradation – Ducting Works Complete ducting works specified in the Scope of Work, including removal, modification and/or replacement of existing ducting and associated duct-side works, shall be included in the quoted price for HVAC Upgradation, and no separate payment shall be admissible unless a separate applicable Price Format line item is specifically provided. Steel renewal, structural modification/fabrication, pipe renewal/new piping, valves and surface preparation & painting associated with HVAC Upgradation shall be paid separately wherever separate applicable Price Format line items are provided. |
| 13 | Supply & Retrofit Replacement: “Supply & Retrofit Replacement” shall include dismantling/removal of the existing equipment/item, supply of completely new equipment/item, necessary equipment-side/interface adaptations, installation, alignment, connection, testing, certification and commissioning, as applicable, complete as specified in the Scope of Work, except works specifically identified as separately payable. |
| 14 | Supply, Crop and Renewal: “Supply, Crop and Renewal” shall include identification/marking as applicable, cropping/removal of the existing item, preparation, supply of new material/item, fabrication, fit-up, installation, joining/welding/bolting, testing and all associated activities required for complete renewal, except activities specifically identified as separately payable. |
| 15 | OEM / Equipment Package Boundary All equipment, components, accessories, integral piping/tubing, valves, instruments, internal cabling, OEM skid/base frame, guards, supports and other items forming part of the OEM/package equipment shall be included in the respective Equipment Replacement/Retrofit Replacement/SITC/Upgradation rate unless specifically identified as separately payable. |
| 16 | Helideck Renewal – Associated Works For Helideck Renewal works under Chapter-10, steel renewal, structural modification/fabrication, piping/pipe structural works and surface preparation & painting shall be measured and paid separately under the respective applicable Price Format line items based on actual quantities executed and duly certified by ONGC. Any associated work required for complete Helideck Renewal for which no separate applicable Price Format line item is available shall be deemed included in the respective Helideck Renewal price. |
| 17 | Steel Renewal / Structural Modification – Surface Preparation & Painting Initial abrasive blasting and shop primer/holding primer specified for new steel supplied for steel renewal/structural modification shall be included in the applicable steel renewal/structural modification rate and shall not be separately payable. Post-fabrication/post-installation surface preparation, including preparation of weld seams, HAZ, cut edges and field joints, touch-up/stripe coating and intermediate/final coat(s), shall be measured and paid separately under the applicable Surface Preparation & Painting Price Format items wherever provided. |
| 18 | Pipe Renewal / New Piping – Surface Preparation & Painting Galvanizing of new pipes/fittings, wherever specified, shall be included in the applicable pipe renewal/new piping rate. Subsequent surface preparation and painting/coating of renewed/new/modified piping shall be measured and paid separately under the applicable Surface Preparation & Painting Price Format items where required by the specified Painting Scheme. |
| 19 | Equipment Painting Factory/shop painting, preservation and marine-duty protective coating of new/replacement equipment, including OEM skid/base frame and integral package components, shall be included in the respective Equipment Replacement/SITC/Upgradation price. Surface preparation and painting of rig-side steel renewal, structural modifications, foundations, stools, supports and piping associated with equipment replacement/upgradation shall be paid separately under the applicable Price Format items wherever such separate items are provided. |
| 20 | Painting – Number of Coats and DFT The Bidder shall consider the complete coating system and number of coats necessary to achieve the specified Dry Film Thickness (DFT) in accordance with the Scope of Work, approved Painting Scheme and paint manufacturer's recommendations. No additional payment shall be admissible merely on account of additional coat(s) required to achieve the specified DFT. |
| 21 | Insulation Works Rates for insulation shall include supply and installation/renewal of insulation of the specified thickness, including fastening, joint treatment, sealing, vapour barrier, protective covering/cladding and all associated materials, accessories and works required for complete insulation as specified in the Scope of Work. Payment shall be based on the actual insulated surface area in m² and actual insulation thickness executed, duly measured and certified by ONGC. The rate specified for the respective base insulation thickness in the Price Format shall be applied on a pro-rata basis for any variation in insulation thickness from the specified base thickness. |
| 22 | Pre-Engineering Survey, Design and Engineering - The Contractor shall carry out all necessary pre-engineering/pre-construction surveys required for execution of the respective jobs. Unless specifically identified as separately payable, all required design/engineering, calculations, drawings, procedures and other technical documentation shall be included in the respective quoted rates/prices. |
| 23 | Classification Society Requirements and Approval - The Contractor shall obtain review/approval of designs, drawings, calculations, procedures and other documents from the applicable Classification Society, i.e. ABS, IRS or both, wherever required under the Contract. Unless specifically provided as a separate Price Format item, costs associated with such design review/approval, surveys, inspections, documentation and certification shall be included in the applicable quoted rates/prices. |
| 24 | Testing, Certification and Documentation - Applicable inspection reports, test certificates, material certificates, calibration certificates, NDT reports, commissioning reports, OEM reports/certificates, Class/TPI documentation, O&M manuals, as-built drawings and all other documentation required under the Scope of Work shall be included in the respective quoted rates/prices unless specifically identified as separately payable. |
| 25 | Measurement of Works and Certification - Measurement of steel renewal, structural modification/fabrication, pipe renewal/new piping, valves, surface preparation & painting, insulation and any other unit-rate works shall be based on the actual quantity satisfactorily executed at site, in the respective Unit of Measurement (UOM) specified in the Price Format, and duly measured and certified by ONGC. Measurement shall be based on the final executed/installed quantity and relevant approved drawings, field measurements, material records and/or other supporting documents, as applicable. The detailed basis and methodology of measurement for each category of work shall be as specified in the respective Scope of Work, Technical Specifications and applicable provisions of the Contract. No payment shall be admissible for wastage, off-cuts, rejected materials, temporary works, rework attributable to the Contractor, or quantities not forming part of the final accepted work, unless specifically provided otherwise in the Contract. |
| 26 | Separate Price Format Items – Associated Works and Payment - Since the exact quantities of steel renewal, structural modification/fabrication, pipe renewal/new piping, valves, surface preparation & painting and other associated works that may become necessary in connection with Equipment Replacement, Supply & Retrofit Replacement, SITC, Upgradation, Helideck Renewal and other applicable jobs cannot be accurately quantified at the bidding stage, indicative quantities for such works have been included under the respective applicable line items of the Price Format under Chapter-1, Chapter-2, Chapter-3 and Chapter-11, as applicable. Wherever such works are required during execution, they shall be measured and paid separately under the respective applicable Price Format line items, based on the actual quantities executed, measured and duly certified by ONGC. Accordingly, the Bidder shall not include the cost of such separately identified works in the quoted price of the respective main job. However, any material, component, accessory, modification, service or associated work necessary for complete and satisfactory execution of the respective main job for which no separate applicable line item is available in the Price Format under Chapter-1, 2, 3 & 11 shall be deemed included in the quoted price of the respective main job, and no additional payment shall be admissible. |
| 27 | Two (02) Years Operational Spares – Equipment Replacement / SITC / Upgradation For all Equipment Replacement, Supply & Retrofit Replacement, SITC and Upgradation works, wherever provision of 02 (Two) Years Operational Spares is specified in the respective Scope of Work, the Contractor shall supply the complete operational spares required for 02 (Two) years of normal operation along with the respective equipment/system. Such operational spares shall be as specified in the Scope of Work and/or recommended by the OEM, as applicable. The cost of such 02 (Two) Years Operational Spares, including procurement, packing, preservation, identification/tagging and delivery to ONGC, shall be included in the quoted price of the respective Equipment Replacement/Retrofit Replacement/SITC/Upgradation item, unless a separate Price Format line item is specifically provided for such spares. No additional payment shall be admissible. |
| 28 | No Duplicate Payment: No activity, material, manpower, equipment, consumable or service shall be paid more than once under different Price Format items. Where an activity/work is expressly or inherently included in one applicable Price Format item, no separate payment for the same shall be admissible under another item. |
| 29 | Price Format to be Read with Scope of Work: Descriptions given in the Price Format are abbreviated and shall not be construed as limiting the Contractor's scope or obligations. Each Price Format line item shall be read in conjunction with the corresponding Job Description, Scope of Work, Technical Specifications, drawings, approved procedures, applicable codes/standards, Classification Society requirements, Special Conditions of Contract and all other applicable Contract documents. |
| 30 | Limiting Charges – Inward Towing The amount quoted by the Bidder towards Inward Towing (sum of Sr No. 733 to 736) shall not exceed 4% of the Total Basic Amount/Price of the Contract, excluding GST. In case the quoted amount exceeds the aforesaid limit, the amount payable towards Inward Towing shall be restricted to 4% of the Total Basic Amount/Price of the Contract, excluding GST, notwithstanding the amount quoted by the Bidder. |
| 31 | For Indian Bidders:- Definition of Import Content: Total value of goods, works, or services sourced from outside India. Indian bidders are required to quote in INR only. However, Indian bidders can quote and receive payment in foreign currency to the extent of their import content indicated above. The payment towards GST will be made by ONGC in Indian rupees as per actuals. The bidder shall specify the foreign currency in which payment for the declared import content is requested. Payment against each invoice, limited to the declared import content portion, shall be made in specified foreign currency. The import content portion/percentage will be deducted from INR invoice value and paid in foreign currency. Foreign currency conversion from INR for the purpose of payment of the declared import content will be governed as follows: a. The closing currency exchange rate as applicable on the day prior to the price bid opening as per \\"Daily\\" Closing exchange rate published on Thomson Reuters internet site https://in.reuters.com/markets/currencies, upto three places of decimal, will be taken into account for conversion of INR into foreign currency. The exchange rates presently appearing on the right-hand corner of the exchange rate chart of the said internet site shall be considered as closing rate for the day. b. Where the time lag between opening of price bid and final decision exceeds three months, the currency exchange rate as above on the day prior to date of final decision will be adopted for conversion of INR into Foreign Currency. |
| 32 | For Foreign Bidders: Definition of local content: Total value of goods, works, or services sourced in India including Indian Agent Commission and excluding GST Advisory Note: The declared local content above should not be lower than the \\"Local Content confirmed under the Public Procurement (Preference to Make in India) (PPP-MII) Order, 2017, dated 19.07.2024 (as amended from time to time), issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Government of India, under Order No. P-45021/2/2017-PP(BE-II)-Part(4) Vol.II. Foreign bidders can quote the price and receive payments either in Indian Rupees or US Dollars or Euros or Pound Sterling or Yen or other relevant currencies, or a combination thereof. However, prices for goods, works, or services (including Indian Agent Commission) sourced in India must be quoted and shall be paid by ONGC only in Indian Rupees to the extent of their Local Content indicated in the bid. In all cases, Indian Agent commission shall be paid in INR only. Payments toward each invoice, corresponding to the local content specified in the bid, shall be made in INR. The local content portion /percentage will be deducted from forex invoice value (as per contractual rates) and paid in INR. Conversion from the quoted foreign currency to INR shall be carried out based on the following: a. The closing currency exchange rate as applicable on the day prior to the price bid opening as per \\"Daily\\" Closing exchange rate published on Thomson Reuters internet site https://in.reuters.com/markets/currencies, upto three places of decimal, will be taken into account for conversion of foreign currency into Indian Rupees. The exchange rates presently appearing on the right-hand corner of the exchange rate chart of the said internet site shall be considered as closing rate for the day. b. Where the time lag between opening of price bid and final decision exceeds three months, the currency exchange rate as above on the day prior to date of final decision will be adopted for conversion of foreign currency into Indian Rupees. |
| 33 | Foreign currency payment will not exceed the quoted import content and payment will be regulated accordingly.However, total payment (including payments made in foreign currency) shall not exceed the lumpsum awarded price |
| 34 | Note on Invoicing Instructions:Indian Contractor: The Contractor shall raise separate invoices for the foreign currency component (attributable to and limited to the extent of quoted import content) and INR components of the Contract Price.Foreign Contractor: The Contractor shall raise separate invoices for the foreign currency component and INR component [attributable to the quoted Local Content {including but not limited to Goods, Works and / or Services (including Indian Agent’s Commission, wherever applicable) sourced / provided from within India} to be quoted, invoiced and paid for in INR only and not in foreign currency].Common to Indian and Foreign Contractors:Under no circumstances shall foreign currency and INR amounts be commingled or included in the same invoice. The foreign currency invoice shall be processed for payment in accordance with the provisions of the Contract and shall further be subject to applicable RBI regulations, foreign exchange regulations, and other prevailing statutory requirements.” Appendix-2 (for Services) Line Item Wise Rate Sheet Dry Dock & Major Lay-up repair of Offshore Drilling Jack-up Rig Sagar Ratna Chapter Sr. No. SOW Job Reference No. Description Qty Unit Unit Basic Rate (Service) if quoted in INR Unit Basic Rate (Service) if quoted in currency other than INR (USD/GBP/EUR/JPY) Total Basic Rate (Service) if quoted in INR Total Basic Rate (Service) if quoted in currency other than INR(USD/GBP/EUR/JPY) a b c d = a * b d = a * c Chapter 1: Renewal of Steel 1.0 1.1.1 Supply, Crop and renewal of ABS Grade Steel- Spud Can(PORT,STBD,FWD) 81.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 2.0 1.1.2 Supply, Crop and renewal of ABS Grade Steel- Pre-Loaded Tanks 132.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 3.0 1.1.3 Supply, Crop and renewal of ABS Grade Steel- Drill Water Tanks 84.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 4.0 1.1.4 Supply, Crop and renewal of ABS Grade Steel- Fresh Water Tanks 92.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 5.0 1.1.5 Supply, Crop and renewal of ABS Grade Steel- Fuel Oil Tanks 105.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 6.0 1.1.6 Supply, Crop and renewal of ABS Grade Steel- Steel Renewal Hull And Structures 91.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 7.0 1.1.7 Supply, Crop and renewal of ABS Grade Steel- Accommodation 77.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 8.0 1.1.8 Supply, Crop and renewal of ABS Grade Steel- Rig Floor And Dog House 67.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 9.0 1.1.9 Supply, Crop and renewal of ABS Grade Steel- Main Deck 139.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 10.0 1.1.10 Supply, Crop and renewal of ABS Grade Steel- Manholes 11.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 11.0 1.1.11 Supply, Crop and renewal of ABS Grade Steel- Hatch 17.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 12.0 1.1.12 Supply, Crop and renewal of ABS Grade Steel- Machinery Deck 64.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 13.0 1.1.13 Supply, Crop and renewal of ABS Grade Steel- Jack House, Cantilever Top & Deck Plate And Shale Shaker Area Top Plate 119.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 14.0 1.1.14 Supply, Crop and renewal of ABS Grade Steel- Helideck 83.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 15.0 1.1.15 Supply, Crop and renewal of ABS Grade Steel- Bracket Plate Size: 3/4\\" Thick, ASTM A-678 Gr. B 1.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 16.0 1.1.16 Supply, fabrication and installation of ABS Grade Steel for Structural Modification / Addition / Deck Extension / Equipment Foundation / Stool / Skid / Support Structure / Miscellaneous Structural Renewal, Repair and Fabrication Works 200.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 17.0 1.2.1 Supply, Crop and renewal of Non-ABS Steel- Trip tank 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 18.0 1.2.2 Supply, Crop and renewal of Non-ABS Steel- Platform for raw water pumps. 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 19.0 1.2.3 Supply, Crop and renewal of Non-ABS Steel- Cat walk, drag way & veedor ramp structure 32.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 20.0 1.2.4 Supply, Crop and renewal of Non-ABS Steel- All types ladders 50.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 21.0 1.2.5 Supply, Crop and renewal of Non-ABS Steel- Spud can access platform 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 22.0 1.2.6 Supply, Crop and renewal of Non-ABS Steel- Renewal of Chequered plate 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 23.0 1.2.7 Supply, Crop and renewal of Non-ABS Steel- Grating renewal 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 24.0 1.2.8 Supply, Crop and renewal of Non-ABS Steel- Monkey board cover 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 25.0 1.2.9 Supply, Crop and renewal of Non-ABS Steel- Flow channel 2.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 26.0 1.2.10 Supply, Crop and renewal of Non-ABS Steel- Platform below rotary table 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 27.0 1.2.11 Supply, Crop and renewal of Non-ABS Steel- Mud channel 7.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 28.0 1.2.12 Supply, Crop and renewal of Non-ABS Steel- Utility area 2.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 29.0 1.2.13 Supply, Crop and renewal of Non-ABS Steel- Mud pit room 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 30.0 1.2.14 Supply, Crop and renewal of Non-ABS Steel- Duct ( Ventilation system) 15.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 31.0 1.2.15 Supply, Crop and renewal of Non-ABS Steel- Renewal of complete sand trap 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 32.0 1.2.16 Supply, Crop and renewal of Non-ABS Steel- Fabrication of various sizes mushroom assembly with non ABS Steel 25.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 33.0 1.2.17 Supply, Crop and renewal of Non-ABS Steel- Occupational health fitness room 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 34.0 1.2.18 Supply, Crop and renewal of Non-ABS Steel- Jacking unit bull gear covers 30.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 35.0 1.2.19 Supply, Crop and renewal of Non-ABS Steel- Mud lab 5.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 36.0 1.2.20 Supply, Crop and renewal of Non-ABS Steel- Various location Railing 10.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 37.0 1.2.21 Supply, fabrication and installation of Non-ABS Steel for Structural Modification / Addition / Deck Extension / Equipment Foundation / Stool / Skid / Support Structure / Miscellaneous Structural Renewal, Repair and Fabrication Works, 150.0 MT 0.0 0.0 Chapter 1: Renewal of Steel 38.0 1.3.1 Suuply and Replacement of Sacrificial Anode inside Spud Can 72.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 39.0 1.3.2 Supply and Replacement of Sacrificial Anode outside Spud Can 45.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 40.0 1.3.3 Supply and Replacement of Aluminum Alloy Anodes on Legs Bay (1 to 5) 45.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 41.0 1.3.4 Supply and Replacement Aluminum Alloy Anodes on Legs Bay (6 to 18) 117.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 42.0 1.4 Supply of Horizontal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 43.0 1.4 Crop and Renewal of Horizontal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 44.0 1.4 Supply of Diagonal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 45.0 1.4 Crop and Renewal of Diagonal Bracings 30.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 46.0 1.4 Supply of internal bracings 120.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 47.0 1.4 Crop and Renewal of internal bracings 120.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 48.0 1.5 Supply and Renewal of Leg Markings and Draft Markings 1.0 AU 0.0 0.0 Chapter 1: Renewal of Steel 49.0 1.6 Crack Repair of Leg Rack Teeth / Leg Teeth 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 50.0 1.6 Crack Repair of RWT Rack Teeth / Teeth 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 51.0 1.6 Crack Repair in Spudcan Structure 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 52.0 1.6 Crack Repair at TKY Joints of Leg Bracings / Chords 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 53.0 1.6 Crack Repair in Other Structural Areas 500.0 cubic cm 0.0 0.0 Chapter 1: Renewal of Steel 54.0 1.6 Supply, Crop and Renewal / Replacement of RWT Rack Tooth / Tooth 3.0 Nos. 0.0 0.0 Chapter 1: Renewal of Steel 55.0 1.6 Supply, Crop and Renewal / Replacement of Leg Rack Tooth / Leg Tooth 3.0 Nos. 0.0 0.0 Chapter 2: Pipe Renewal 56.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-10 mm (3/8\\") 14.0 m 0.0 0.0 Chapter 2: Pipe Renewal 57.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-15 mm (1/2\\") 138.0 m 0.0 0.0 Chapter 2: Pipe Renewal 58.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-20 mm (3/4\\") 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 59.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-25 mm (1\\") 268.0 m 0.0 0.0 Chapter 2: Pipe Renewal 60.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-32 mm (1-1/4\\") 216.0 m 0.0 0.0 Chapter 2: Pipe Renewal 61.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-40 mm (1-1/2\\") 768.0 m 0.0 0.0 Chapter 2: Pipe Renewal 62.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-50 mm (2\\") 722.0 m 0.0 0.0 Chapter 2: Pipe Renewal 63.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-65 mm (2-1/2\\") 660.0 m 0.0 0.0 Chapter 2: Pipe Renewal 64.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-80 mm (3\\") 2160.0 m 0.0 0.0 Chapter 2: Pipe Renewal 65.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-100 mm (4\\") 1403.0 m 0.0 0.0 Chapter 2: Pipe Renewal 66.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-125 mm (5\\") 696.0 m 0.0 0.0 Chapter 2: Pipe Renewal 67.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-150 mm (6\\") 1970.0 m 0.0 0.0 Chapter 2: Pipe Renewal 68.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-200 mm (8\\") 948.0 m 0.0 0.0 Chapter 2: Pipe Renewal 69.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-250 mm (10\\") 378.0 m 0.0 0.0 Chapter 2: Pipe Renewal 70.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-300 mm (12\\") 187.0 m 0.0 0.0 Chapter 2: Pipe Renewal 71.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-400 mm (16\\") 60.0 m 0.0 0.0 Chapter 2: Pipe Renewal 72.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-15 mm 420.0 m 0.0 0.0 Chapter 2: Pipe Renewal 73.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-25 mm 84.0 m 0.0 0.0 Chapter 2: Pipe Renewal 74.0 2.1 Supply, Crop and Renewal of Sch 80, SEAMLESS, ASTM, A-312,TP316 pipes, NB-32 mm 72.0 m 0.0 0.0 Chapter 2: Pipe Renewal 75.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-15 mm 150.0 m 0.0 0.0 Chapter 2: Pipe Renewal 76.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-20 mm 91.0 m 0.0 0.0 Chapter 2: Pipe Renewal 77.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-25 mm 1026.0 m 0.0 0.0 Chapter 2: Pipe Renewal 78.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-32 mm 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 79.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-40 mm 2244.0 m 0.0 0.0 Chapter 2: Pipe Renewal 80.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-50 mm 1298.0 m 0.0 0.0 Chapter 2: Pipe Renewal 81.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-65 mm 660.0 m 0.0 0.0 Chapter 2: Pipe Renewal 82.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-80 mm 1080.0 m 0.0 0.0 Chapter 2: Pipe Renewal 83.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-100 mm 798.0 m 0.0 0.0 Chapter 2: Pipe Renewal 84.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-125 mm 926.0 m 0.0 0.0 Chapter 2: Pipe Renewal 85.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-150 mm 365.0 m 0.0 0.0 Chapter 2: Pipe Renewal 86.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-200 mm 170.0 m 0.0 0.0 Chapter 2: Pipe Renewal 87.0 2.1 Supply, Crop and Renewal of Sch 40, SEAMLESS, ASTM, A-106, Gr-B pipes, GI coated NB-300 mm 324.0 m 0.0 0.0 Chapter 2: Pipe Renewal 88.0 2.1 Supply, Crop and Renewal of 90/10 Copper-Nickel Pipe / Tube, ASTM B466, UNS C70600, of various sizes and applicable wall thickness, complete as specified in the Scope of Work. 5.0 MT 0.0 0.0 Chapter 2: Pipe Renewal 89.0 2.1 Supply and Renewal / Installation of 90/10 Copper-Nickel Pipe Fittings, of compatible approved material/specification, various sizes and connection types, complete as specified in the Scope of Work. 1.0 MT 0.0 0.0 Chapter 2: Pipe Renewal 90.0 2.1 Supply & Installation/Renewal of 50 mm thick Insulation for Hot-Service Piping using Mineral Wool/Rock Wool or approved equivalent suitable for the applicable service temperature, including protective outer covering/cladding and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 91.0 2.1 Supply & Installation/Renewal of 75 mm thick Insulation for High-Temperature/Exhaust Piping using high-temperature Mineral Wool/Calcium Silicate/Ceramic Fibre or approved equivalent suitable for the applicable service temperature, including protective outer covering/cladding and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 92.0 2.1 Supply & Installation/Renewal of 25 mm thick Insulation for Cold-Service/HVAC/Chilled-Water Piping using closed-cell Elastomeric NBR or approved equivalent suitable for condensation control and applicable service temperature, including adhesive, joint sealing, vapour barrier/protective finish and all associated materials/accessories, complete as specified in the Scope of Work. 1000.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 93.0 2.1 Supply & Installation/Renewal of 50 mm thick Removable Insulation Mattress/Pad for Valves, Flanges and Other Applicable Components using Mineral Wool/Ceramic Fibre or approved equivalent with suitable removable outer covering, including fastening arrangement and all associated materials/accessories, complete as specified in the Scope of Work. 500.0 m² 0.0 0.0 Chapter 2: Pipe Renewal 94.0 2.2 Supply, Crop and Renewal of Copper Tube ASTM B88 type k heavy wall - 1/4\\" 30.0 m 0.0 0.0 Chapter 2: Pipe Renewal 95.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 1/4\\" 1200.0 m 0.0 0.0 Chapter 2: Pipe Renewal 96.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 3/8\\" 550.0 m 0.0 0.0 Chapter 2: Pipe Renewal 97.0 2.2 Supply, Crop and Renewal of SS tube ASTM A269TP316L - 1/2\\" 120.0 m 0.0 0.0 Chapter 2: Pipe Renewal 98.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-25mm 300.0 m 0.0 0.0 Chapter 2: Pipe Renewal 99.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-40mm 240.0 m 0.0 0.0 Chapter 2: Pipe Renewal 100.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch 160 ASTM A106 Gr.C, GI coated NB-80mm 500.0 m 0.0 0.0 Chapter 2: Pipe Renewal 101.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS ASTM A106 Gr.C, GI coated NB-50mm 12.0 m 0.0 0.0 Chapter 2: Pipe Renewal 102.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS ASTM A106 Gr.C, GI coated NB-80mm 6.0 m 0.0 0.0 Chapter 2: Pipe Renewal 103.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- Sch XXS API 5L X65 PSL-2, GI coated NB-100mm 25.0 m 0.0 0.0 Chapter 2: Pipe Renewal 104.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 15mm thick API 5L X65 PSL-2, GI coated NB-50mm 24.0 m 0.0 0.0 Chapter 2: Pipe Renewal 105.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 20mm thick API 5L X65 PSL-2, GI coated NB-125mm 150.0 m 0.0 0.0 Chapter 2: Pipe Renewal 106.0 2.3 Supply, Crop and Renewal of of High Pressure Pipeline- 21mm thick API 5L X65 PSL-2, GI coated NB-80mm 250.0 m 0.0 0.0 Chapter 3: Valve Renewal 107.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 37.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 108.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 109.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 110.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 111.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 5K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 112.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 113.0 3.1 Supply, Crop and Renewal of Handle-Operated Butterfly Valve, JIS 16K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 114.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 115.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 11.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 116.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 117.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 118.0 3.2 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (WECO Type), JIS 10K, NB 400 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 119.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 120.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 121.0 3.3 Supply, Crop and Renewal of Handle-Operated Butterfly Valve (SP-HL WECO Type), JIS 10K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 80.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 122.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 5K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 123.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 5K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 124.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 50 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 125.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 80 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 126.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 127.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 128.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 129.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 130.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 131.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 250 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 132.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 10K, NB 300 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 133.0 3.4 Supply, Crop and Renewal of Gear-Operated Butterfly Valve, JIS 16K, NB 125 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 134.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 100 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 135.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 150 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 136.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 200 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 137.0 3.5 Supply, Crop and Renewal of Gear-Operated Butterfly Valve (WECO Type), JIS 10K, NB 250 mm, Body: Ductile Iron, FCD450, Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 138.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 200 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 139.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 250 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 140.0 3.6 Supply, Crop and Renewal of Gear-Operated Butterfly Valve with Rod Extension (WECO Type), JIS 10K, NB 300 mm, Body: Cast Carbon Steel (SCPH2), Disc: Aluminium Bronze, Seat: NBR or EPDM, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 141.0 3.7 Supply, Crop and Renewal of Pneumatic-Operated Butterfly Valve, JIS 10K, NB 200 mm, Body: Cast Carbon Steel (SCPH2), Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 142.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 143.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 144.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 145.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 146.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 27.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 147.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 40 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 148.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 149.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 150.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 151.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 152.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 5K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 153.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 154.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 155.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 35.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 156.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Aluminium Bronze Casting, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 157.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 32 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 158.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 159.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 160.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 161.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 162.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 163.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 164.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Aluminium Bronze Casting, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 165.0 3.8 Supply, Crop and Renewal of Globe Stop Valve, JIS 16K, NB 100 mm, Body: Cast Iron, Disc/Seat: Cast IronSeat Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 166.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 167.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 168.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 169.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 170.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 171.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 5K, NB 100 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 172.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 173.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 28.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 174.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 175.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 176.0 3.9 Supply, Crop and Renewal of Hose Globe Stop Valve, JIS 10K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 177.0 3.1 Supply, Crop and Renewal of Pneumatic Cylinder Operated Globe Stop Check Valve, JIS 10K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 178.0 3.1 Supply, Crop and Renewal of Pneumatic Cylinder Operated Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 179.0 3.11 Supply, Crop and Renewal of Pneumatic Cylinder Operated Angle Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast iron FC25, Disc/Seat: SCS 13, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 180.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 181.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 182.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 183.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 5K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 184.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 20 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 185.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 186.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 187.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 188.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 189.0 3.12 Supply, Crop and Renewal of Globe Stop Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 190.0 3.13 Supply, Crop and Renewal of Pressure Control Valve, JIS 10K, NB 250 mm, Body: Cast Iron FCD 45, Disc/Seat: SUS304, Stem: SUS 316, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 191.0 3.14 Supply, Crop and Renewal of Safety Relief Valve, JIS 5K, NB 25 mm, Body: Cast Iron, Disc/Seat: Stainless Steel, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 192.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 193.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 194.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 195.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 13.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 196.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 197.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 198.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 199.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 200.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 201.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 202.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 203.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 204.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 205.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 206.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 207.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 208.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 209.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 250 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 210.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 10K, NB 300 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 211.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 16K, NB 100 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 212.0 3.15 Supply, Crop and Renewal of Swing Check Valve, JIS 16K, NB 150 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 213.0 3.16 Supply, Crop and Renewal of Swing Check Valve (STR Type), JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 214.0 3.16 Supply, Crop and Renewal of Swing Check Valve (STR Type), JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 215.0 3.17 Supply, Crop and Renewal of Reach-Rod Operated Gate (Sluice) Valve (PLT), JIS 10K, NB 250 mm, Body: Cast iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 216.0 3.17 Supply, Crop and Renewal of Reach-Rod Operated Gate (Sluice) Valve (PLT), JIS 10K, NB 300 mm, Body: Cast iron, Disc/Seat: Cast SteelSeat Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 217.0 3.18 Supply, Crop and Renewal of Storm Valve, JIS 5K, NB 150 mm, Body: Cast Steel, Disc/Plug: Bronze, complete as specified in the Scope of Work. 26.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 218.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 219.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 220.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 221.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 222.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 223.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 224.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 225.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 226.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 227.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 32 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 228.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 229.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 230.0 3.19 Supply, Crop and Renewal of Angle Globe Stop Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 231.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 15 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 232.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 233.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 234.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 235.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 236.0 3.2 Supply, Crop and Renewal of Hose Angle Globe Stop Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 237.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 238.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 239.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 240.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 241.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 25 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 242.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 243.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 244.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 245.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 246.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 10K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 247.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 248.0 3.21 Supply, Crop and Renewal of Angle Globe Stop Check Valve, JIS 16K, NB 250 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 249.0 3.22 Supply and Renewal of Air Vent Head, NB 50 mm, JIS 5K, Without Screen, Pipe Thickness: 3.8 mm, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 250.0 3.22 Supply and Renewal of Air Vent Head, NB 65 mm, JIS 5K, With Screen, Pipe Thickness: 4.2 mm, complete as specified in the Scope of Work. 7.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 251.0 3.22 Supply and Renewal of Air Vent Head, NB 100 mm, JIS 5K, With Screen, Pipe Thickness: 4.5 mm, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 252.0 3.22 Supply and Renewal of Air Vent Head, NB 100 mm, JIS 5K, Without Screen, Pipe Thickness: 4.5 mm, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 253.0 3.22 Supply and Renewal of Air Vent Head, NB 200 mm, JIS 5K, Without Screen, Pipe Thickness: 5.8 mm, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 254.0 3.22 Supply and Renewal of Air Vent Head, NB 200 mm, JIS 5K, Without Screen, Pipe Thickness: 8.2 mm, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 255.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 256.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 257.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 50 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 258.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 65 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 259.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 260.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 261.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 80 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 262.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 5K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 263.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 264.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 80 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 265.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 100 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 266.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 125 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 267.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 10K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 268.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Cast Iron, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 269.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 270.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 150 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 271.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Cast Steel , complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 272.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 273.0 3.23 Supply, Crop and Renewal of Gate (Sluice) Valve, JIS 16K, NB 200 mm, Body: Cast Iron, Disc/Seat: Cast SteelSeat of Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 274.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 5K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 275.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 10K, NB 40 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 276.0 3.24 Supply, Crop and Renewal of Emergency Shut-Off Valve, JIS 10K, NB 65 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 277.0 3.25 Supply, Crop and Renewal of Fire Monitor Valve, JIS 5K, NB 80 mm, Body: Cast Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 278.0 3.26 Supply, Crop and Renewal of Ball Valve, JIS 10K, NB 25 mm, Body: Bronze, Disc/Seat: Bronze, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 279.0 3.27 Supply and Renewal of Water Jet Eductor, Tag No: WP-1, Model No: FC(BC)-ER-100, Dimension: 80 x 100 x125 mm, Model: FC(BC)-ER-100, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 280.0 3.27 Supply and Renewal of Water Jet Eductor for Spud Can, JIS 10K, Model No: FC(BC)-ER-80, Dimension: 65x80x100 mm, Model: FC(BC)-ER-80, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 281.0 3.27 Supply and Renewal of Water Jet Eductor, Tag No: WP-123, Model No: BC-S4B, Dimension: 32x32x40 mm, Model: BC-S4B, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 282.0 3.28 Supply and Renewal of Deck Stand & Reach Rod Mechanism (Gate Valve Operation), Complete mechanism (Gate Valve + Swing Check + Deck Stand + Reach Rod), Gate/Swing Check: per individual valve schedule, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 283.0 3.29 Supply, Crop and Renewal of Self-Closing Valve (Fuel Oil Sounding Pipe), JIS 5K, NB 40 mm, Body: Cast Bronze, Disc: Bronze, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 284.0 3.3 Supply, Crop and Renewal of Pneumatic-Operated Butterfly Valve (Diverter Flow Line), JIS 10K, NB 250 mm, Body: Ductile Iron (FCD450), Disc: Stainless Steel 316/316L, Seat: NBR or EPDM, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 285.0 3.31 Supply, Crop and Renewal of Air Reducing Valve, JIS 10K, NB 50 mm, Body: Cast Iron, Disc/Plug: Stainless Steel, Diaphragm: Bronze, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 286.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 3000K, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 287.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 50 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 288.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 289.0 3.32 Supply, Crop and Renewal of Gate (Sluice) Valve (High Pressure), JIS 5000K, NB 125 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 290.0 3.33 Supply, Crop and Renewal of Pressure Safety Valve (High Pressure), JIS 5000 psiK, NB 80 mm, Body: Cast Steel, Disc/Seat: Cast Steel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 291.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 40 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 292.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 50 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 18.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 293.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 65 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 294.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 80 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 295.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 100 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 91.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 296.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 200, NB 125 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 297.0 3.34 Supply and Renewal of Hammer Union / Hammer Union Component, FIG 602, NB 50 mm, Male/Female/Plug as applicable, Butt-Weld (BW) / Threaded (THD) end connection as applicable, Material: Steel Forgings, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 298.0 3.34 Supply and Renewal of Victaulic Coupling, NB 50 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 27.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 299.0 3.34 Supply and Renewal of Victaulic Coupling, NB 80 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 300.0 3.34 Supply and Renewal of Victaulic Coupling, NB 125 mm, Material: ASTM A536 Ductile Iron Grade 65-45-12, complete as specified in the Scope of Work. 105.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 301.0 3.34 Supply and Renewal of Camlock Coupling, NB 50 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 302.0 3.34 Supply and Renewal of Camlock Coupling, NB 65 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 303.0 3.34 Supply and Renewal of Camlock Coupling, NB 80 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 304.0 3.34 Supply and Renewal of Camlock Coupling, NB 125 mm, Material: ASTM A351 CF-8M / SS316, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 305.0 3.34 Supply and Renewal of Dresser Coupling, NB 80 mm, Material: ASTM A516 Gr.70 / ASTM A53, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 3: Valve Renewal 306.0 3.34 Supply and Renewal of Dresser Coupling, NB 250 mm, Material: ASTM A516 Gr.70 / ASTM A53, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 307.0 4.1 Updating of Stability Manuals, Booklets, Plans and Associated Documentation, complete as per Scope of work 1.0 AU 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 308.0 4.2 Supply, Removal/Renewal and Installation of Electrical Cabling and Associated Electrical Works inside Accommodation complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 4: Jobs as per MODU 1989 Requirement 309.0 4.2 Design, Supply, Fabrication and Installation of Porta Cabin complete with Accessories 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 310.0 5.1.1 Supply & Replacement of Wooden Panel Flooring for Jr. & Sr. Recreation room, Executive room, Conference Hall.Type of Wood: Burma Teak Wood 150.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 311.0 5.2.1 Supply & Replacement of Quarry tile on 30 mm thick cement to be Provided at Galley & Dry Provision floor. 165.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 312.0 5.2.2 Supply & Replacement of 2mm thick vinyl tile on 7mm thick latex type and 30mm thick insulation board (HI-HEAT BOARD) to be Provided at Junior & Senior mess and stair area. 100.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 313.0 5.2.3 Supply & Replacement of mosaic tile on 30 mm thick cement to be Provided at all Toilet and Laundry Room. 475.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 314.0 5.2.4 Supply & Replacement of 2mm thick Vinyl tile on 7mm thick latex type deck composition and 25mm thick rock wool with 20mm thick cement layer reinforced with expanded metal mesh and 20 SWG GI steel sheet flooring at main deck rooms and passage area. 60.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 315.0 5.2.5 Supply & Replacement of 2mm thick Vinyl tile on 7mm thick latex type deck composition Provided on floor at A, B, C deck rooms and passage area, foremen office. 650.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 316.0 5.3.1 Supply & Replacement of C- class overhead ceiling panel with 100 mm & 75mm glass wool insulation 310.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 317.0 5.3.2 Supply & Replacement of overhead ceiling panel 650.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 318.0 5.3.3 Supply & Replacement of C-class ceiling panel with A-60 class 50 mm thick overhead insulation 130.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 319.0 5.3.4 Supply & Replacement of C- class ceiling panel with A-60 class 100 mm thick rock wool overhead insulation 60.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 320.0 5.4.1 Supply & Replacement of B-class Partition/Lining panels including 100 mm thick glass wool insulation. 3350.0 m² 0.0 0.0 Chapter 5: Accomodation Jobs 321.0 5.5.1 Supply & Replacement of fluorescent (photoluminescent) skirting of 50mm width at various locations of accommodation. 900.0 m 0.0 0.0 Chapter 5: Accomodation Jobs 322.0 5.5.2 Supply & Replacement of tile skirting of 100mm width on wall at galley and Jr. Sr. mess, laundry room. 95.0 m 0.0 0.0 Chapter 5: Accomodation Jobs 323.0 5.6.1 Supply of readymade Shoe Racks with hang helmet at upper area to be made in main deck 'A', 'B' and 'C' decks at exit points on port & starboard sides as per following: a) Shoe Rack for 'Main deck-0' DECK: Size 1850 x 1400 x 320 mm b) Shoe Rack for 'A' DECK: Size 1850x1200x320mm c) Shoe Rack for 'B' DECK: Size 1720 x 1120x 320 mm d) Shoe Rack for ''C' DECK: Size 1200 x 1000x 320 mm 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 324.0 5.7 Supply & Replacement of side wall, divisional wall, ceiling, flooring , insulation and doors at Freezer & Cooler Room 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 325.0 5.8.1.1 Supply & Replacement of B-15 class fire proof doors 41.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 326.0 5.8.1.2 Supply & Replacement of A-0 class fire proof doors 54.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 327.0 5.8.1.3 Supply & Replacement of C- class fire proof doors 16.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 328.0 5.8.1.4 Supply & Replacement of A-60 class fire proof doors 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 329.0 5.8.2.1 Supply & Replacement of weather tight doors 13.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 330.0 5.8.3.1 Supply & Replacement of water tight doors 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 331.0 5.8.4.1 Supply & Replacement of non-tight doors 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 332.0 5.8.5.1 Supply & Replacement of Gas tight doors 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 333.0 5.9.1 Supply & Replacement of side scuttles with frame. 17.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 334.0 5.9.2 Supply & replacement of square windows size 1000X650mm with frames. 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 335.0 5.9.3 Supply & replacement of square windows size 1800X800mm with frames. 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 336.0 5.9.4 Supply & replacement of square windows size 400X550mm with frames. 31.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 337.0 5.9.5 Supply & replacement of square windows size 750X600mm with frames. 11.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 338.0 5.9.6 Supply & replacement of square windows size 750X800mm with frames. 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 339.0 5.10.1 Supply and replacement of high quality Mirrors cabinet with compartments in bedrooms of all decks. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 340.0 5.11.1 Clocks- Supply and replacement of wall clocks in all bedrooms in 'A', 'B' & main decks, all Offices and both Messes. 60.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 341.0 5.12.1 Supply and replacement of dinning table size 3500mm (length) X 900mm (width) X 700mm (height) at Jr. & Sr. mess. 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 342.0 5.12.2 Supply and replacement of serving table size 800 X 500 X 850mm at lobby 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 343.0 5.12.3 Supply and replacement of book shelf size: 350 X 300 mm 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 344.0 5.13.1 Supply & Replacement of European style toilet and drainage system in 'A' and 'B' Decks. 9.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 345.0 5.13.2 Supply & Replacement of Indian style toilet and drainage system in 'A' and main- Decks. 8.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 346.0 5.14.1 Supply & Replacement of (A-type)wash basin with drainage system in B-Deck. 6.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 347.0 5.14.2 Supply & Replacement of (B-type) wash basin with drainage system in B-Deck. 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 348.0 5.14.3 Supply & Replacement of (C-type) wash basin with drainage system in A-Deck. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 349.0 5.14.4 Supply & Replacement of (D-type)wash basin with drainage system in A-Deck, Main- Decks. 11.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 350.0 5.14.5 Supply & Replacement of (E-type)wash basin with drainage system in A, B and Main Deck. 7.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 351.0 5.14.6 Supply & Replacement of (F-type)wash basin with drainage system in Aux. machine room. 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 352.0 5.15.1 Supply & Replacement of (B-type) Hand basin with drainage system in Mud pit rom, sand trap space. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 353.0 5.15.2 Supply & Replacement of (C-type) Hand basin with drainage system at Jack House Top (FORE). 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 354.0 5.16.1 Supply & Replacement of (A-type ) Urinal with drainage system at Jack House Top (FORE). 1.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 355.0 5.16.2 Supply & Replacement of (B-type ) Urinal with drainage system at A-Deck, Main-Deck common toilet. 4.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 356.0 5.17.1 Supply & Replacement of massage type shower with drainage system at 'A', 'B', deck . 7.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 357.0 5.17.2 Supply & Replacement of telephone type shower with drainage system in 'A', 'B', deck. 2.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 358.0 5.17.3 Supply & Replacement of Fixed type shower with drainage system in 'A', 'B', deck. 8.0 Set 0.0 0.0 Chapter 5: Accomodation Jobs 359.0 5.18.1 Supply & Replacement of sofa size: 2200 X 780 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 360.0 5.18.2 Supply & Replacement of sofa size: 1900 X 700 X 800mm 25.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 361.0 5.18.3 Supply & Replacement of sofa size: 1750 X 700 X 800mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 362.0 5.18.4 Supply & Replacement of sofa size: 2110 X 500 X 770mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 363.0 5.18.5 Supply & Replacement of sofa size: 1550 X 780 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 364.0 5.18.6 Supply & Replacement of sofa size: 1500 X 700 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 365.0 5.18.7 Supply & Replacement of sofa size: 1400 X 700 X 800mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 366.0 5.18.8 Supply & Replacement of sofa size: 1310 X 500 X 690mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 367.0 5.18.9 Supply & Replacement of sofa size: 1300 X 700 X 800mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 368.0 5.19.1 Supply & Replacement of Easy Chair (A) size: 690 X 650 X 630mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 369.0 5.19.2 Supply & Replacement of Easy Chair (B) size: 760 X 710 X 660mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 370.0 5.19.3 Supply & Replacement of Easy Chair (C) size: 750 X 830 X 780mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 371.0 5.19.4 Supply & Replacement of Arm Chair (A) size: 440 X 573 X 780mm 55.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 372.0 5.19.5 Supply & Replacement of Arm Chair (B) size: 510 X 540 X 745mm 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 373.0 5.19.6 Supply & Replacement of Revolving Arm Chair size: 580 X 580 X 750-830mm 14.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 374.0 5.19.7 Supply & Replacement of Revolving High Stool size: 370 X 400 X 800-1000mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 375.0 5.19.8 Supply & Replacement of Revolving Mess Chair size: 385 X 390 X 810mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 376.0 5.19.9 Supply & Replacement of Folding Chair size: 535 X 486 X 765mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 377.0 5.19.10 Supply & Replacement of Easy Chair size: 690 X 700 X 720mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 378.0 5.20.1 Supply and replacement of new table with drawers size 600 X 450 X 740mm 18.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 379.0 5.20.2 Supply and replacement of new table with drawers size 1000 X 600 X 740mm 15.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 380.0 5.20.3 Supply and replacement of new table with drawers size 1200 X 700 X 740mm 4.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 381.0 5.20.4 Supply and replacement of new table with drawers size 1000 X 700 X 740mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 382.0 5.20.5 Supply and replacement of new table with drawers size 1600 X 700 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 383.0 5.20.6 Supply and replacement of new table with drawers size 1100 X 700 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 384.0 5.20.7 Supply and replacement of new table with drawers size 1200 X 650 X 760mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 385.0 5.21.1 Supply and replacement of 2-tier Bed with locker size 2000 X 900 X 1700mm 25.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 386.0 5.21.2 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 2-tier beds for replacement of damaged drawers 20.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 387.0 5.21.3 Supply and replacement of 1-tier Bed with locker size 2000 X 800 X 1700mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 388.0 5.21.6 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 1 tire beds for replacement of damaged drawers 8.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 389.0 5.21.4 Steel Bed- Spare drawers with all accessories such as lock and handle and name tags suitable for 1 tire beds for replacement of damaged drawers 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 390.0 5.21.5 Supply and replacement of 1-tier Bed with locker size 2000 X 900 X 850mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 391.0 5.22.1 Supply and replacement of wardrobe size 2100 X 600mm 21.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 392.0 5.22.2 Supply and replacement of wardrobe size 2100 X 900mm 35.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 393.0 5.22.3 Supply and replacement of jumper locker size 1790 X 900mm 6.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 394.0 5.22.4 Supply and replacement of jumper locker size 1790 X 608mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 395.0 5.22.5 Supply and replacement of Filling Cabinet size 675 X 456mm 3.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 396.0 5.22.6 Supply and replacement of Book Case size 700 X 600mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 397.0 5.22.7 Supply and replacement of filing cabinet size 1319 X 456mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 398.0 5.22.8 Supply and replacement of locker size 1790 X 880mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 399.0 5.22.9 Supply and replacement of bench with drawer size 1635 X 600 mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 400.0 5.22.10 Supply and replacement of bench with drawer size 1100 X 600mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 401.0 5.22.11 Supply and replacement of bench with locker size 1600 X 915mm 1.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 402.0 5.22.12 Supply and replacement of shoes locker size 1522 X 415 X 930mm 2.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 403.0 5.22.13 Supply and replacement of shoes locker size 1032 X 415 X 930mm 5.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 404.0 5.23 Supply and fitting of all plumbing fixtures in all bathrooms 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 405.0 5.24 Supply and replacement of Bed and table LED lights & lamps in A, B, main Deck Accommodation Rooms 104.0 Sets 0.0 0.0 Chapter 5: Accomodation Jobs 406.0 5.25 Supply and replacement of 220V AC supply sockets location at every tables and beds. 150.0 Sets 0.0 0.0 Chapter 5: Accomodation Jobs 407.0 5.26 Supply and replacement of Mattress with cover. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 408.0 5.27 Supply and replacement of Pillow with cover. 100.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 409.0 5.28.1 Supply and replacement of bedsheet in all accommodation beds 200.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 410.0 5.28.2 Supply and replacement of blankets with cover in all accommodation beds 200.0 Nos. 0.0 0.0 Chapter 5: Accomodation Jobs 411.0 5.29 Supply and replacement of Ladder in living quarter at main deck, A, B, C-Decks 1.0 AU 0.0 0.0 Chapter 5: Accomodation Jobs 412.0 5.3 Supply and replacement of IMO Signage Name plate and caution plate in all location on the rig. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 413.0 6.1 Supply & Retrofit Replacement of Existing 40 MT BOP Lifting System with New 50 MT Cumulative Capacity BOP Lifting System 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 414.0 6.2 Supply & Retrofit Replacement of Existing Choke & Kill Manifold with New Choke & Kill Manifold System, 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 415.0 6.3 Supply & Retrofit Replacement of Existing Shale Shaker Units with New Shale Shaker Units – 1 AU comprising 03 Nos. Shale Shakers 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 416.0 6.4 Supply & Retrofit Replacement of Existing Halon 1301 Fixed Fire-Fighting System with New CO₂ Total Flooding Fixed Fire-Fighting System 2078.0 m³ 0.0 0.0 Chapter 6: Upgradation of Existing System 417.0 6.5 Supply & Retrofit Replacement of Existing Emergency Generator System with New Emergency Generator and Associated Emergency Power System 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 418.0 6.6 Supply & Retrofit Replacement of Existing 60 TR Marine HVAC System with Complete New 80 TR Marine HVAC System-Equipment Replacement, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 419.0 6.6 Supply & Retrofit Replacement of Existing 60 TR Marine HVAC System with Complete New 80 TR Marine HVAC System-Ducting Side Replacement, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 420.0 6.7 Supply & Retrofit Replacement of Existing Fire Alarm System (FAS) and General Alarm (GA) System with Complete New FAS & GA System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 421.0 6.8 Supply & Retrofit Replacement of Existing Air Dryer System with Complete New Air Dryer System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 422.0 6.9 Dismantling of Raw Water Tower, completed as per scope of work 1.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 423.0 6.9 Supply, Installation, Testing & Commissioning of Hose Reel System, complete as per Scope of Work. 3.0 AU 0.0 0.0 Chapter 6: Upgradation of Existing System 424.0 6.1 Refurbishment of VFD House of TDS 11 SA, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 425.0 7.1 Supply & Retrofit Replacement of Monkey Board Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 426.0 7.2 Supply & Retrofit Replacement of Rig Floor Air Winch, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 427.0 7.2 Supply & Retrofit Replacement of Texas Deck Air Winch, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 428.0 7.3 Supply & Retrofit Replacement of Stabbing Board Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 429.0 7.4 Supply & Retrofit Replacement of Man-Rider Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 430.0 7.5 Supply & Retrofit Replacement of Jetting Air Winch, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 431.0 7.6 Supply & Retrofit Replacement of Bridle Chain Air Winch, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 432.0 7.7 Supply & Retrofit Replacement of Burner Boom Air Winch, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 433.0 7.8 Supply & Retrofit Replacement of Casing Tong, size range 4\\" to 13-3/8\\", complete with accessories as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 434.0 7.9 Supply & Retrofit Replacement of Tubing Tong, size range 2-3/8\\" to 4-1/2\\", complete with accessories as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 435.0 7.1 Supply & Retrofit Replacement of Liner Cooling Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 436.0 7.11 Supply & Retrofit Replacement of Bilge Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 437.0 7.12 Supply & Retrofit Replacement of Sanitary Water Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 438.0 7.13 Supply & Retrofit Replacement of Raw Water Pump Sets complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 439.0 7.14 Supply & Retrofit Replacement of Drawworks Brake Cooling Pump Sets & Heat Exchanger, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 440.0 7.15 Supply & Retrofit Replacement of Fire Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 441.0 7.16 Supply & Retrofit Replacement of Bilge Ballast Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 442.0 7.17 Supply & Retrofit Replacement of Base Oil (SOBM) Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 443.0 7.18 Supply & Retrofit Replacement of Super Charger Pump Set with Motor, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 444.0 7.19 Supply & Retrofit Replacement of Trip Tank Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 445.0 7.2 Supply & Retrofit Replacement of Mud Mixing Pump Set with Motor, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 446.0 7.21.1 Supply & Retrofit Replacement of Desander Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 447.0 7.21.2 Supply & Retrofit Replacement of Desilter Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 448.0 7.21.3 Supply & Retrofit Replacement of SOBM Mud Transfer Pump Set with Motor, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 449.0 7.22 Supply & Retrofit Replacement of Hot Water System (Electric Water Heater), complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 450.0 7.23 Supply & Retrofit Replacement of Fresh Water Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 451.0 7.24 Supply & Retrofit Replacement of Hot Water Circulation Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 452.0 7.24 Supply & Installation of Additional Hot Water Circulation Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 453.0 7.25.1 Supply & Retrofit Replacement of Diesel Oil Transfer Pump Set, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 454.0 7.25.2 Supply & Retrofit Replacement of Lube Oil Pump Set – Main Deck (Port Side), complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 455.0 7.25.3 Supply & Retrofit Replacement of Lube Oil Pump Set – Aux. Machinery Room Port Side & Engine Room, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 456.0 7.26 Supply & Retrofit Replacement of Water Maker, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 457.0 7.27 Supply & Retrofit Replacement of Rig Service Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 458.0 7.28.1 Supply & Retrofit Replacement of Substructure Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 459.0 7.28.2 Supply & Retrofit Replacement of Cold Start Air Reservoir, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 460.0 7.29 Supply & Retrofit Replacement of Pneumatic Bilge Pump, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 461.0 7.3 Supply of Pneumatic Grease Pump – 20 kg Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 462.0 7.3 Supply of Pneumatic Grease Pump – 50 kg Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 463.0 7.31 Supply & Retrofit Replacement of Pneumatic Angle Grinder, 90 PSI, 4\\" Wheel, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 464.0 7.32 Supply & Retrofit Replacement of Pneumatic Impact Wrench, 1250–1400 ft-lb, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 465.0 7.33 Supply & Retrofit Replacement of Pipe Spinner, 1250 ft-lb, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 466.0 7.34 Supply & Retrofit Replacement of Mud Agitator Unit with Motor – 20 HP, 46\\" Impeller, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 467.0 7.34 Supply & Retrofit Replacement of Mud Agitator Unit with Motor – 10 HP, 28\\" Impeller, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 468.0 7.35 Supply & Retrofit Replacement of Burner Boom, complete as specified in the Scope of Work. 2.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 469.0 7.36 Supply & Retrofit Replacement of BOP Accumulator Unit and Control System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 470.0 7.37 Supply & Retrofit Replacement of Crane Load Indication System, complete as specified in the Scope of Work. 3.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 471.0 7.38 Supply & Retrofit Replacement of Barge Instrumentation System (BIS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 472.0 7.39 Supply & Retrofit Replacement of Gas Detection System (GDS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 473.0 7.4 Supply & Retrofit Replacement of Marine Growth Prevention System (MGPS), complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 474.0 7.41 Supply & Retrofit Replacement of Hydraulic Torque Wrench, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 475.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 1 Core × 325 mm², complete as specified in the Scope of Work. 4400.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 476.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 1.25 mm², complete as specified in the Scope of Work. 1240.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 477.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 2 mm², complete as specified in the Scope of Work. 7560.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 478.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 2 Core × 3.5 mm², complete as specified in the Scope of Work. 700.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 479.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 2 mm², complete as specified in the Scope of Work. 6380.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 480.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 3.5 mm², complete as specified in the Scope of Work. 7780.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 481.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 4 mm², complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 482.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 5 mm², complete as specified in the Scope of Work. 2000.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 483.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 5.5 mm², complete as specified in the Scope of Work. 880.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 484.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 8 mm², complete as specified in the Scope of Work. 1070.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 485.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 14 mm², complete as specified in the Scope of Work. 1490.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 486.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 22 mm², complete as specified in the Scope of Work. 250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 487.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 30 mm², complete as specified in the Scope of Work. 60.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 488.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 38 mm², complete as specified in the Scope of Work. 250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 489.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 50 mm², complete as specified in the Scope of Work. 600.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 490.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 80 mm², complete as specified in the Scope of Work. 160.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 491.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 100 mm², complete as specified in the Scope of Work. 155.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 492.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 3 Core × 125 mm², complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 493.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 5 Core × 1.25 mm², complete as specified in the Scope of Work. 760.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 494.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 6 Core × 14 mm², complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 495.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 7 Core × 1.5 mm², complete as specified in the Scope of Work. 150.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 496.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 7 Core × 2 mm², complete as specified in the Scope of Work. 700.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 497.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 12 Core × 1.25 mm², complete as specified in the Scope of Work. 1160.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 498.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 12 Core × 1.5 mm², complete as specified in the Scope of Work. 80.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 499.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 20 Core × 3.5 mm², complete as specified in the Scope of Work. 1250.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 500.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 23 Core × 1.25 mm², complete as specified in the Scope of Work. 1060.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 501.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 23 Core × 1.5 mm², complete as specified in the Scope of Work. 100.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 502.0 7.42 Supply & Replacement of Marine-Grade Power Cable, 33 Core × 1.5 mm², complete as specified in the Scope of Work. 140.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 503.0 7.43 Supply & Retrofit Replacement of Weatherproof Push Button Station, complete as specified in the Scope of Work. 51.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 504.0 7.43 Supply & Retrofit Replacement of Explosion-Proof Push Button Station, complete as specified in the Scope of Work. 17.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 505.0 7.44 Supply & Retrofit Replacement of Appleton Plug for Hazardous Location, Watertight, Cat. No. ECP-20232, complete as specified in the Scope of Work. 100.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 506.0 7.44 Supply & Retrofit Replacement of Appleton Receptacle Socket/Receptacle Interlocked with Switch for Hazardous Location, 2-Way Cable, Cat. No. EFSC175-20232, complete as specified in the Scope of Work. 60.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 507.0 7.44 Supply & Retrofit Replacement of Appleton Receptacle with Two Sockets/Receptacle Interlocked with Switch for Hazardous Location, 4-Way Cable, Cat. No. EFSC175-20232, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 508.0 7.44 Supply & Retrofit Replacement of Receptacle with Switch, Japanese Make, Type S1M, 3P, 250 V, 10 A, IP56, complete as specified in the Scope of Work. 150.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 509.0 7.44 Supply & Retrofit Replacement of 3-Pin Receptacle, 250 V, 10 A, complete as specified in the Scope of Work. 30.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 510.0 7.44 Supply & Retrofit Replacement of 3-Pin Plug, 250 V, 10 A, complete as specified in the Scope of Work. 150.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 511.0 7.44 Supply & Retrofit Replacement of On-Off Selector Switch, Japanese Make, 250 V, 10 A, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 512.0 7.44 Supply & Retrofit Replacement of SS Enclosure Box for Weatherproof Receptacles, 300 × 200 × 220 mm, with Hinged Door and Locking Mechanism, complete as specified in the Scope of Work. 25.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 513.0 7.44 Supply & Retrofit Replacement of Junction Box, 2 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 60.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 514.0 7.44 Supply & Retrofit Replacement of Junction Box, 3 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 515.0 7.44 Supply & Retrofit Replacement of Junction Box, 4 Cable Entry, MS, 250 V, 20 A, with 8-Terminal TB, complete as specified in the Scope of Work. 90.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 516.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for Generator, 1600 A, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 517.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for SCR, 1600 A, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 518.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for VFD House, 1600 A, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 519.0 7.45 Supply & Retrofit Replacement of Air Circuit Breaker (ACB) for TDS, 1600 A, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 520.0 7.46 Supply & Retrofit Replacement of Lighting Distribution Panel, 1200 × 500 × 500 mm, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 521.0 7.46 Supply & Retrofit Replacement of Lighting Distribution Panel, 800 × 600 × 500 mm, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 522.0 7.46 Supply & Retrofit Replacement of MCB, 20 A, for Lighting Distribution Panel, complete as specified in the Scope of Work. 24.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 523.0 7.46 Supply & Retrofit Replacement of MCB, 15 A, for Lighting Distribution Panel, complete as specified in the Scope of Work. 61.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 524.0 7.46 Supply & Retrofit Replacement of Contactor, 110 V Coil, 60 Hz, for Lighting Distribution Panel, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 525.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 280 × 200 × 230 mm, MS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 526.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 300 × 130 mm, SS, 6-Way, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 527.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 260 × 600 × 130 mm, SS, 18-Way, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 528.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 260 × 400 × 130 mm, SS, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 529.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 530 × 400 × 250 mm, SS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 530.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 800 × 600 × 300 mm, MS with Hinged Locking Door, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 531.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 750 × 360 × 230 mm, MS with Hinged Locking Door, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 532.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 280 × 410 × 130 mm, MS, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 533.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 330 × 270 × 230 mm, MS, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 534.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 480 × 320 × 230 mm, MS, complete as specified in the Scope of Work. 9.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 535.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 320 × 140 mm, MS, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 536.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 490 × 430 × 230 mm, SS, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 537.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 250 × 320 × 140 mm, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 538.0 7.47 Supply & Retrofit Replacement of Junction Box/Enclosure, 270 × 320 × 230 mm, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 539.0 7.47 Supply & Retrofit Replacement of Welding Junction Box with Positive and Negative Plug & Socket, 400 A, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 540.0 7.47 Supply & Retrofit Replacement of Welding Junction Box with Positive and Negative Plug & Socket, SS, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 541.0 7.48 Supply & Retrofit Replacement of Group Starter Panels and ESB Panel in Pump Room, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 542.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 6\\" Width, complete as specified in the Scope of Work. 75.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 543.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 8\\" Width, complete as specified in the Scope of Work. 75.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 544.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 10\\" Width, complete as specified in the Scope of Work. 200.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 545.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 12\\" Width, complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 546.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 24\\" Width, complete as specified in the Scope of Work. 450.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 547.0 7.49 Supply & Replacement of Cable Tray/Cable Ladder, 30\\" Width, complete as specified in the Scope of Work. 300.0 m 0.0 0.0 Chapter 7: Equipment Replacement Jobs 548.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Hazardous Area, complete as specified in the Scope of Work. 75.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 549.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Non-Hazardous Area, complete as specified in the Scope of Work. 48.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 550.0 7.5 Supply & Retrofit Replacement of Marine LED Flood Light – Weatherproof, complete as specified in the Scope of Work. 70.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 551.0 7.5 Supply & Retrofit Replacement of Marine Linear LED Light – 4 ft, Hazardous Area, complete as specified in the Scope of Work. 180.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 552.0 7.5 Supply & Retrofit Replacement of Marine LED Light for Accommodation Interior/Exterior – Weatherproof, complete as specified in the Scope of Work. 400.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 553.0 7.5 Supply & Retrofit Replacement of Marine Linear LED Light – 2 ft, Non-Hazardous Area, complete as specified in the Scope of Work. 50.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 554.0 7.5 Supply & Retrofit Replacement of Marine Pendant LED Area Light – Hazardous Area, complete as specified in the Scope of Work. 25.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 555.0 7.5 Supply & Retrofit Replacement of Marine Pendant LED Area Light – Non-Hazardous Area, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 556.0 7.5 Supply & Retrofit Replacement of Marine Explosion-Proof Hand Lamp, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 557.0 7.52 Supply & Retrofit Replacement of Electric Hoists comprising 02 Nos. 2-Ton Hoists for Sack Storage/Heavy Drill Store and 01 No. 5-Ton Explosion-Proof Underhung Crane/Hoist at Main Deck, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 558.0 7.52 Supply & Installation of Additional 5-Ton Explosion-Proof Electric Hoist – Mud Pump Room, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 559.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 20 m³/min, 400 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 560.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 30 m³/min, 450 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 561.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 550 m³/min, 1100 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 562.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 550 m³/min, 1100 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 563.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 650 m³/min, 1100 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 564.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 700 m³/min, 2600 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 565.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 1050 m³/min, 1500 mm Dia., Static Pressure 50 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 566.0 7.53 Supply & Retrofit Replacement of Supply Fan Assembly with Motor, Capacity 1100 m³/min, 1300 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 567.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 8 m³/min, Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 568.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 30 m³/min, 450 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 569.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 60 m³/min, 550 mm Dia., Static Pressure 45 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 570.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 70 m³/min, 450 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 571.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 150 m³/min, 550 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 572.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 200 m³/min, 600 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 573.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 300 m³/min, 700 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 574.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 350 m³/min, 800 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 575.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 450 m³/min, 1000 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 576.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 500 m³/min, 1000 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 577.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 500 m³/min, 1000 mm Dia., Static Pressure 30 mmAq, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 578.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 700 m³/min, 2600 mm Dia., Static Pressure 40 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 579.0 7.53 Supply & Retrofit Replacement of Exhaust Fan Assembly with Motor, Capacity 1000 m³/min, 2600 mm Dia., Static Pressure 20 mmAq, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 580.0 7.54 Supply & Retrofit Replacement of SCR Control Room Cooling System, Marine HVAC, 10 TR, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 581.0 7.55 Supply & Retrofit Replacement of Air-Conditioning System for Doghouse, 4 TR Dual Packaged, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 582.0 7.56 Supply & Retrofit Replacement of Air-Conditioning Unit for Mud Lab, 5 TR Air-Cooled, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 583.0 7.57 Supply & Retrofit Replacement of Air-Conditioning System for Driller Cabin, 2 TR Dual Roof-Top, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 584.0 7.58 Supply & Retrofit Replacement of Air-Conditioning Unit for Crane, 1.5 TR Roof-Mounted, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 585.0 7.58 Supply & Retrofit replacement of Marine-Grade Panel AC Unit, 4000 BTU, for Crane, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 586.0 7.59 Supply & Retrofit Replacement of Air-Conditioning Unit for Electrical & Mechanical Store, 5 TR, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 587.0 7.6 Supply & Retrofit Replacement of Fresh Water Hydrophore Tank, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 588.0 7.6 Supply & Retrofit Replacement of Sanitary Hydrophore Tank, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 589.0 7.61 Supply & Retrofit Replacement of Sewage Treatment Plant (STP) Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 590.0 7.62 Supply & Retrofit Replacement of Upper Shock Pad, complete as specified in the Scope of Work. 18.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 591.0 7.63 Supply & Retrofit Replacement of Bottom Plug, complete as specified in the Scope of Work. 24.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 592.0 7.64 Supply & Retrofit Replacement of Electric Grinder, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 593.0 7.64 Supply & Retrofit Replacement of Bench Grinder, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 594.0 7.65 Supply & Retrofit Replacement of Weighing Machine, 200 kg Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 595.0 7.66 Supply & Retrofit Replacement of AC Motor, 0.20 to 20 kW, complete as specified in the Scope of Work. 14.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 596.0 7.66 Supply & Retrofit Replacement of AC Motor, 120 to 200 kW, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 597.0 7.66 Supply & Retrofit Replacement of AC Motor with Magnetic Brake, 10 to 20 kW, complete as specified in the Scope of Work. 16.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 598.0 7.67 Supply & Retrofit Replacement of Welding Machine and Revamping of Welding Distribution System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 599.0 7.68 Supply & Retrofit Replacement of Multi Cable Transit (MCT) System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 600.0 7.69 Supply & Retrofit Replacement of Industrial Washing Machine, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 601.0 7.69 Supply & Retrofit Replacement of Industrial Laundry Drying Machine, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 602.0 7.69 Supply & Retrofit Replacement of Laundry Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 603.0 7.69 Supply & Installation of Additional Laundry Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 604.0 7.7 Supply of Pneumatic Bilge Pump, Wilden 3\\" Pro-Flo Model PS 1520, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 605.0 7.7 Supply of Pneumatic Bilge Pump, Wilden 2\\" Pro-Flo Model PS 820, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 606.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 5\\", complete as specified in the Scope of Work. 32.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 607.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 4\\", complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 608.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 3\\", complete as specified in the Scope of Work. 48.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 609.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 2\\", complete as specified in the Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 610.0 7.71 Supply & Retrofit Replacement of Low-Pressure Hose, 1\\", complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 611.0 7.72 Supply & Retrofit Replacement of High-Pressure Trip Tank & Hole Filling Hose, 35 ft × 2\\", 2000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 612.0 7.72 Supply & Retrofit Replacement of High-Pressure Rotary Hose, 75 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 613.0 7.72 Supply & Retrofit Replacement of High-Pressure Vibrating Mud Hose, 35 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 614.0 7.72 Supply & Retrofit Replacement of High-Pressure Vibrating Mud Hose, 45 ft × 3-1/2\\", 5000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 615.0 7.72 Supply & Retrofit Replacement of High-Pressure Hose for Displacement Job, 50 ft × 2\\", 5000 PSI, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 616.0 7.72 Supply & Retrofit Replacement of High-Pressure Jetting Hose, 45 ft × 2-1/2\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 617.0 7.72 Supply & Retrofit Replacement of High-Pressure Rig Floor Cementing Hose, 30 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 618.0 7.72 Supply & Retrofit Replacement of High-Pressure Co-Flex Choke Line Hose, 50 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 619.0 7.72 Supply & Retrofit Replacement of High-Pressure Cementing Hose, 45 ft × 3\\", 10000 PSI, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 620.0 7.72 Supply & Retrofit Replacement of High-Pressure BOP Control Line Hose, 50 ft × 1\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 621.0 7.72 Supply & Retrofit Replacement of High-Pressure BOP Control Return Line Hose, 50 ft × 1-1/2\\", 3000 PSI, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 622.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Rig Floor Air Winch, 12-Ton Capacity, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 623.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Power Tong Counterweight, 8-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 624.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Man-Rider Air Winch, 8-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 625.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Fall Preventer Counterweight, 6-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 626.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Monkey Board Air Winch, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 627.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Aft Side Air Winch, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 628.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Make-Up Tong, 10-Ton Capacity, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 629.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for Drill Pipe Rack, 10-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 630.0 7.73 Supply & Retrofit Replacement of Guide Pulley Assembly for BHA Rack, 10-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 631.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Fall Preventer Counterweight, 8-Ton Capacity, complete as specified in the Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 632.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Texas Deck, 8-Ton Capacity, complete as specified in the Scope of Work. 12.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 633.0 7.73 Supply & Retrofit Replacement of Sheave/Pulley Assembly for Spider Guide, 4-Ton Capacity, complete as specified in the Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 634.0 7.75 Supply & Retrofit Replacement of Impressed Current Cathodic Protection (ICCP) System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 635.0 7.77 Supply & Retrofit Replacement of Towing Arrangements as per approved drawing, including installation, testing and certification, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 636.0 7.78 Supply & Retrofit Replacement of Diesel Oil (D.O.) Purifier Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 637.0 7.79 Supply & Retrofit Replacement of Bilge, Ballast & Fire Pump Set, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 638.0 7.8 Supply & Retrofit Replacement of Degasser Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 639.0 7.82 Supply & Retrofit Replacement of Galley Equipment, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 640.0 7.83 Supply, Installation, Testing & Commissioning of New Gumbo Removal Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 641.0 7.84 Supply, Installation, Testing & Commissioning of New High-Pressure BOP Test Unit, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 642.0 7.85 Supply & Retrofit Replacement of Complete Strainer Body with Strainer Element, complete as specified in the Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 643.0 7.86 Supply & Retrofit Replacement of Sprinkler Nozzles, complete as specified in the Scope of Work. 300.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 644.0 7.88 Supply & Retrofit Replacement of Weatherproof Exit Light, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 645.0 7.88 Supply & Retrofit Replacement of Explosion-Proof Exit Light, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 646.0 7.89 Supply & Retrofit Replacement of Weatherproof Emergency Light, complete as specified in the Scope of Work. 40.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 647.0 7.89 Supply & Retrofit Replacement of Explosion-Proof Emergency Light, complete as specified in the Scope of Work. 20.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 648.0 7.9 Supply & Retrofit Replacement of Booster Heater, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 649.0 7.91 Supply & Retrofit Replacement of HPU Unit of Iron Roughneck, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 650.0 7.92 Supply & Retrofit Replacement of Jet Pump Set, complete as specified in the Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 651.0 7.93 Supply & Retrofit Replacement of Bench Vice, complete as specified in the Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 7: Equipment Replacement Jobs 652.0 7.94 Supply & Retrofit Replacement of Foldable Cellar Deck, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 7: Equipment Replacement Jobs 653.0 7.95 Revamping of Jacking Motors’ Overload Control System, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 654.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 0 to 5 KW, complete as per Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 655.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 6 to 10 KW, complete as per Scope of Work. 10.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 656.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 11 to 15 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 657.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 16 to 40 KW, complete as per Scope of Work. 3.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 658.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 41 to 60 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 659.0 8.1 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors- 61 to 100 KW, complete as per Scope of Work. 2.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 660.0 8.2 Removal, Overhauling, Reinstallation, Testing & Commissioning of AC Motors with Magnetic Brake Assembly- 10-20 KW, complete as per Scope of Work. 46.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 661.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 0 to 5 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 662.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 6 to 20 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 663.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 21 to 50 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 664.0 8.3 Rewinding of the general three phase induction motors all over the vessel may be considered for the following motors- 51 to 150 KW, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 665.0 8.3 Rewinding of the general three phase induction motors with magnetice braking all over the vessel may be considered for the following motors- 10-20 KW 5.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 666.0 8.4 Removal, Overhauling, Reinstallation, Testing & Commissioning of Climbing Pinion Assembly and Reduction Gear Box Assembly of the Jacking System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 667.0 8.5 Removal, Overhauling, Reinstallation, Testing & Commissioning of Cantilever and Substructure Skidding Units with Gearboxes, complete as per Scope of Work. 6.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 668.0 8.6 Removal, Overhauling and Installation Testing and Commissioning of complete SOBM System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 8: Overhauling of Equipments 669.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Up to 20 kVA, complete as specified in the Scope of Work 5.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 670.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 20 kVA and up to 50 kVA, complete as specified in the Scope of Work 6.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 671.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 50 kVA and up to 100 kVA, complete as specified in the Scope of Work 4.0 Nos. 0.0 0.0 Chapter 8: Overhauling of Equipments 672.0 8.7 Removal, Overhauling, Reinstallation, Testing & Commissioning of Dry-Type Transformer – Above 100 kVA and up to 1500 kVA, complete as specified in the Scope of Work 2.0 Nos. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 673.0 9.1 Supply and Retrofit Replacement of Mud Pit Fixed Foam Station, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 674.0 9.2 Supply and Retrofit Replacement of Mud Pit Fixed DCP Skid System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 675.0 9.3 Supply and Retrofit Replacement of Helideck Fixed Foam System, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 9: Replacement of LSA and FFA 676.0 9.4 Supply & Retrofit Replacement of Windsock complete with SS 316 Rotating Frame and associated mounting arrangement, complete as specified in the Scope of Work. 9.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 677.0 9.4 Supply & Retrofit Replacement of Helideck Net, complete with securing/fastening arrangement, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 678.0 9.4 Supply & Retrofit Replacement of Cargo Net – 12 ft × 12 ft, 6-inch mesh, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 679.0 9.4 Supply & Retrofit Replacement of Cargo Net – 12 ft × 12 ft, 4-inch mesh, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 680.0 9.4 Supply & Retrofit Replacement of Embarkation Ladder – 33 m length, complete with securing arrangement and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 681.0 9.4 Supply & Retrofit Replacement of 5 kg Portable CO₂ Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 682.0 9.4 Supply & Retrofit Replacement of 6.8 kg Wheeled CO₂ Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 23.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 683.0 9.4 Supply & Retrofit Replacement of 18 kg Wheeled CO₂ Fire Extinguisher, complete with hose, discharge nozzle and accessories, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 684.0 9.4 Supply & Retrofit Replacement of 5 kg Portable DCP Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 18.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 685.0 9.4 Supply & Retrofit Replacement of 9 L Portable Foam Fire Extinguisher, complete with hose, discharge nozzle, mounting arrangement and accessories, complete as specified in the Scope of Work. 19.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 686.0 9.4 Supply & Retrofit Replacement of 45 kg Wheeled DCP Fire Extinguisher, complete with trolley, 4 m × 1-inch hose/hose reel, discharge nozzle and accessories, complete as specified in the Scope of Work. 4.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 687.0 9.4 Supply & Retrofit Replacement of 45 kg Wheeled DCP Fire Extinguisher, complete with trolley, 16 m × 1.25-inch hose/hose reel, nitrogen operating cylinder, discharge nozzle and accessories, complete as specified in the Scope of Work. 1.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 688.0 9.4 Supply & Retrofit Replacement of 50 L Wheeled Foam Fire Extinguisher, complete with trolley, 4 m × 1-inch hose/hose reel, discharge nozzle and accessories, complete as specified in the Scope of Work. 3.0 No. 0.0 0.0 Chapter 9: Replacement of LSA and FFA 689.0 9.4 Supply & Retrofit Replacement of 63 mm × 20 m Fire Hose with instantaneous quick couplings at both ends, complete with Stainless Steel Fire Hose Box, structural supports/brackets and associated accessories, complete as specified in the Scope of Work. 27.0 Set 0.0 0.0 Chapter 9: Replacement of LSA and FFA 690.0 9.4 Supply & Retrofit Replacement of 65 mm × 20 m Fire Hose for Air-Foam Service with instantaneous quick couplings at both ends, complete with Stainless Steel Fire Hose Box, structural supports/brackets and associated accessories, complete as specified in the Scope of Work. 2.0 Set 0.0 0.0 Chapter 9: Replacement of LSA and FFA 691.0 9.5 Supply, installation, testing, certification and commissioning (SITCC) of life boat and davit (launching appliances), complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 10: Renewal of Helicopter Deck 692.0 10.0 Renewal of Helicopter Deck, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 11: Surface Preparation & Painting 693.0 11.0 Surface Preparation- Fresh Water Wash-FWW 90710.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 694.0 11.0 Surface Preparation- Chemical Cleaning-CC 102372.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 695.0 11.0 Surface Preparation- Chipping / Scraping (CH/SCR) 19440.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 696.0 11.0 Surface Preparation- HB at main deck area- High pressure Hydro Blasting upto 35000 to 40000 PSI 2040.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 697.0 11.0 Surface Preparation- HB at Leg- High pressure Hydro Blasting upto 35000 to 40000 PSI 12134.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 698.0 11.0 Surface Preparation- FW wash/FW Hosing down Or FW Mop up (for interiors) after 1st coat. (HD) 93360.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 699.0 11.0 Surface Preparation- HPFWW at Derick 3600.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 700.0 11.0 Surface Preparation- HPFIWW at oil tanks 1260.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 701.0 11.0 Surface Preparation- Power Brushing / Buffing (PB) 20568.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 702.0 11.0 Surface Preparation- Grit Blasting to Sa 2 1/2 standard (SB) 78277.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 703.0 11.0 Surface Preparation- Scraping 12710.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 704.0 11.0 Procurement, supply and application of 2 pack Acrylic Aliphatic Polyurethane Finish (AAPU) 13319.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 705.0 11.0 Procurement, supply and application of Alkyd finish coat 8730.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 706.0 11.0 Procurement, supply and application of Chlorinated Rubber Finish Paint (CRF/P) 3600.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 707.0 11.0 Procurement, supply and application of 2 pack HB Polyamine adduct cured coal tar epoxy coating (CTEP) 87641.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 708.0 11.0 Procurement, supply and application of Recoatable epoxy (EPICON) 1860.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 709.0 11.0 Procurement, supply and application of 2 pack Epoxy Tie Coat (ETC) 19214.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 710.0 11.0 Procurement, supply and application of 2 pack Glass Flake Reinforced Epoxy (GFRE) 24026.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 711.0 11.0 Procurement, supply and application of 2 pack High Build Epoxy Coating - Aluminium/Coloured. (HBEPC) 55261.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 712.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy HB Primer Aluminium content max. 10 % (PEAPR) 86128.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 713.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy for Potable Water Tanks (PEPW) 840.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 714.0 11.0 Procurement, supply and application of 2 pack High Build Pure Epoxy with unlimited max recoating Interval (PEUR) 57370.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 715.0 11.0 Procurement, supply and application of 2 pack Pure Epoxy Recoatable Coating with MIO pigment HR (PEURM) 1608.0 m² 0.0 0.0 Chapter 11: Surface Preparation & Painting 716.0 11.0 Procurement, supply and application of Top Grade SPC suitable for 60 months dd interval (TGSPG60) 25214.0 m² 0.0 0.0 Chapter 12: New Technology 717.0 12.0 Supply & Retrofit Replacement of Existing Battery Banks with LTO Battery Banks, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 718.0 13.1 Supply and Retrofit Replacement of Manholes, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 719.0 13.2 Supply and Retrofit Replacement of Hatch, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 13: Miscellaneous Replacement 720.0 13.3 Supply and Retrofit Replacement of Scupper Drain, complete as per Scope of Work. 1.0 AU 0.0 0.0 Chapter 14: Infocom Jobs 721.0 14.1 Supply & Retrofit Replacement of IP Based ATEX Phone, complete as per Scope of Work. 8.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 722.0 14.2 Supply & Retrofit Replacement of License Free Walkie Talkies with battery charger, complete as per Scope of Work. 15.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 723.0 14.3 Supply & Retrofit Replacement of Docking Station for INMARSAT Phone, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 724.0 14.4 Supply & Retrofit Replacement of Soft VC Equipment with Industry Grade Laptop, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 725.0 14.5 Supply & Retrofit Replacement of Colour Multi-Functional Device, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 726.0 14.6 Supply & Retrofit Replacement of Mono-Multi-Function Devices, complete as per Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 727.0 14.7 Supply & Retrofit Replacement of All-in-one Desktops, complete as per Scope of Work. 5.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 728.0 14.8 Supply & Retrofit Replacement of Television Sets, complete as per Scope of Work. 4.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 729.0 14.9 Supply & Retrofit Replacement of 65 Inch Interactive Display, complete as per Scope of Work. 1.0 Nos. 0.0 0.0 Chapter 14: Infocom Jobs 730.0 14.10.1 Supply & Retrofit Replacement of Instrumentation Cables- 12 Pair, 24 core, 1 SQ mm Instrumentation Cables, complete as per Scope of Work. 500.0 m 0.0 0.0 Chapter 14: Infocom Jobs 731.0 14.10.2 Supply & Retrofit Replacement of Instrumentation Cables- 1 Pair, 2 core, 1 SQ mm Instrumentation Cables, complete as per Scope of Work. 500.0 m 0.0 0.0 Chapter 14: Infocom Jobs 732.0 14.10.3 Supply & Retrofit Replacement of Instrumentation Cables- LAN/Comm. Cables (CAT 6), complete as per Scope of Work. 3000.0 m 0.0 0.0 Chapter 15: Services 733.0 15.1.a Inward Towing of Rig from Bombay Floating Light (BFL) to Outer Anchorage of the Shipyard 1.0 AU 0.0 0.0 Chapter 15: Services 734.0 15.1.a Standby Charges for Towing Boat, including Crew and Associated Services, and Tow Master deployed on the Rig, for reasons attributable to ONGC – Per Day Per Boat. Each completed 24-hour standby period shall be payable at 100% of the quoted day rate. For the residual standby period, less than 12 hours shall be payable at 50% of the quoted day rate and 12 hours or more shall be payable at 100% of the quoted day rate, complete as specified in the Scope of Work. 4.0 Day/Boat 0.0 0.0 Chapter 15: Services 735.0 15.1.a Mobilization & Demobilization of Towing Boat(s), including Crew and Associated Services, and Tow Master deployed on the Rig, payable in the event the towing operation is terminated/cancelled by ONGC after mobilization/deployment for reasons attributable to ONGC, complete as specified in the Scope of Work. 1.0 AU 0.0 0.0 Chapter 15: Services 736.0 15.1.b Inward Towing/Marine Assistance for Shifting of Rig from Outer Anchorage of the Shipyard to Shipyard Berth/Dry Dock 1.0 AU 0.0 0.0 Chapter 15: Services 737.0 15.1.c Outward Towing/Marine Assistance for Shifting of Rig from Shipyard Berth/Dry Dock to Outer Anchorage of the Shipyard 1.0 AU 0.0 0.0 Chapter 15: Services 738.0 15.1.d Outward Towing of Rig from Outer Anchorage of the Shipyard to Bombay Floating Light (BFL) 1.0 AU 0.0 0.0 Chapter 15: Services 739.0 15.2 Preparation and Readiness of Dry Dock/Docking Facility for Accommodation and Dry Dock Repair of the Rig 1.0 AU 0.0 0.0 Chapter 15: Services 740.0 15.2 Dry Docking Charges for the Rig for the Required Duration for Execution of Works as Specified in the Scope of Work 60.0 Day 0.0 0.0 Chapter 15: Services 741.0 15.2 Berthing Charges for the Rig for the Required Duration for Execution of Works as Specified in the Scope of Work 290.0 Day 0.0 0.0 Chapter 15: Services 742.0 15.3 Mobilization & Demobilization Charges for ABS Classification Society Surveyor 30.0 Visit 0.0 0.0 Chapter 15: Services 743.0 15.3 Day Rate for ABS Classification Society Surveyor 100.0 Surveyor-Day 0.0 0.0 Chapter 15: Services 744.0 15.3 Mobilization & Demobilization Charges for IRS Classification Society Surveyor 30.0 Visit 0.0 0.0 Chapter 15: Services 745.0 15.3 Day Rate for IRS Classification Society Surveyor 100.0 Surveyor-Day 0.0 0.0 Chapter 15: Services 746.0 15.4 Obtaining and maintaining all insurance required under GCC Clause No. 7 and the Contract, including CAR/EAR, Third-Party/Public Liability, Employees’/Workmen Compensation, Contractor’s plant, equipment and vehicles, subcontractors’ insurance and other applicable insurance required for execution of the Works; insurance charges for towing vessels, harbour/assist tugs and other marine craft shall be deemed included in the respective Towing Services charges and shall not be payable separately under this item. 1.0 AU 0.0 0.0 Chapter 15: Services 747.0 15.5 Shore Power supply AC 50/60 Hz for rig operations if required 550000.0 KWH 0.0 0.0 Chapter 15: Services 748.0 15.6 Cooling water Supply(through duplex strainer) two lines to be provided per day for rig operations if required 350.0 Day 0.0 0.0 Chapter 15: Services 749.0 15.7 Supply of Sea water(through duplex strainer) per ton. for rig operations if required 3500.0 MT 0.0 0.0 Chapter 15: Services 750.0 15.8 Supply of Fresh water per ton. for rig operations if required 2500.0 MT 0.0 0.0 Chapter 15: Services 751.0 15.9 Supply of pot water per ton for rig operations if required (water supplied shall be as per BIS std andcertified by NABL labs or caertificate stating fit for drinking purpose from govt agencies like coprporation,muncipality, panchayat etc) 1000.0 MT 0.0 0.0 Chapter 15: Services 752.0 15.1 Garbage disposal per day for the stay of the rig 350.0 Day 0.0 0.0 Chapter 15: Services 753.0 15.11.a Hiring of Air Conditioned 5 Seater (1+4) SEDAN as per the Scope of Work-Fixed Cost, Daily limit 50 km/day 350.0 Day 0.0 0.0 Chapter 15: Services 754.0 15.11.b Hiring of Air Conditioned 5 Seater (1+4) SEDAN as per the Scope of Work-Variation Cost, applicable in case daily limit exceed 50 km 10000.0 km 0.0 0.0 Chapter 15: Services 755.0 15.12.a Hiring of Air Conditioned 7 Seater (1+6) SUV as per the Scope of Work-Fixed Cost, Daily limit 50 km/day 350.0 Day 0.0 0.0 Chapter 15: Services 756.0 15.12.b Hiring of Air Conditioned 7 Seater (1+6) SUV as per the Scope of Work-Variation Cost, applicable in case daily limit exceed 50 km 10000.0 km 0.0 0.0 Chapter 15: Services 757.0 15.13.a Hiring of Air Conditioned 20-25 Seater mini-bus as per the Scope of Work-Fixed Cost, Daily limit 50 km/day 350.0 Day 0.0 0.0 Chapter 15: Services 758.0 15.13.b Hiring of Air Conditioned 20-25 Seater mini-bus as per the Scope of Work-Variation Cost, applicable in case daily limit exceed 50 km 10000.0 km 0.0 0.0 Chapter 15: Services 759.0 15.14 Provision of Containers 20' for Storage 350.0 Day 0.0 0.0 Chapter 15: Services 760.0 15.15 Provision of Containers 40' for Storage 350.0 Day 0.0 0.0 Chapter 15: Services 761.0 15.16 DAY RATE OF TEMPO – UPTO 1 TON 2.0 Day 0.0 0.0 Chapter 15: Services 762.0 15.17 DAY RATE OF TEMPO UPTO 4 TON 2.0 Day 0.0 0.0 Chapter 15: Services 763.0 15.18 DAY RATE OF TRUCK UPTO -12 TON 2.0 Day 0.0 0.0 Chapter 15: Services 764.0 15.19 DAY RATE OF TRAILER – 20 TON 2.0 Day 0.0 0.0 Chapter 15: Services 765.0 15.2 DAY RATE OF LOW BED TRAILER UPTO 40 TON 2.0 Day 0.0 0.0 Chapter 15: Services 766.0 15.21.a PER POINT RATE FOR ULTRASONIC THICKNESS GAUGING (UTG) 10000.0 Nos. 0.0 0.0 Chapter 15: Services 767.0 15.21.b PER POINT RATE FOR THICKNESS GAUGING BY MULTIPLE ECHO MACHINE [OR ANY OTHEREQUIPMENT] 10.0 Nos. 0.0 0.0 Chapter 15: Services 768.0 15.21.c PER METER RATE FOR DYE PENETRANT TEST (DPT) ON WELD LENGTHS. 50.0 m 0.0 0.0 Chapter 15: Services 769.0 15.21.d PER SQUARE METER RATE FOR DP TEST ON OTHER AREAS 50.0 m² 0.0 0.0 Chapter 15: Services 770.0 15.21.e PER METER RATE FOR MAGNETIC PARTICLE INSPECTION (MPI) 25.0 m 0.0 0.0 Chapter 15: Services 771.0 15.21.f PER METER RATE FOR X-RAY OF THE WELD OF TEST LINES. 10.0 m 0.0 0.0 Chapter 15: Services 772.0 15.21.g PER ITEM RATE FOR MPI/DP OF PAD EYES AT VARIOUS LOCATIONS 50.0 Nos. 0.0 0.0 Chapter 15: Services 773.0 15.21.h UNIT RATE FOR CARRYING OUT THE RADIOGRAPHY TEST AS PER THE SURVEYOR'S RECOMMENDATION 10.0 Nos. 0.0 0.0 Chapter 15: Services 774.0 15.21.i ROPE ACCESS NDT/UTG/MPI/DPT per day etc 10.0 Nos. 0.0 0.0 Chapter 15: Services 775.0 15.21.j Erection, Maintenance, Modification/Relocation and Dismantling of Scaffolding/Staging 1000.0 cubic m 0.0 0.0 Chapter 15: Services 776.0 15.22 Provision of Skilled manpower for miscellaneous activities. 1000.0 Manday 0.0 0.0 Chapter 15: Services 777.0 15.23 Provision of Un-Skilled manpower for miscellaneous activities. 2000.0 Manday 0.0 0.0 Chapter 15: Services 778.0 15.24 Provision of ABS Approved Welder, 6G Rated 100.0 Manday 0.0 0.0 Chapter 15: Services 779.0 15.25 Provision of ABS Approved Welder, 6G Rated 50.0 Manday 0.0 0.0 Total Basic amount INR 0.0 0.0 USD Sr. No. Notes to Price Format |
| 35 | GST Input Tax Credit: The Bidder shall consider the benefit of eligible Input Tax Credit (ITC) available under the applicable GST regime while arriving at the quoted rates/prices and shall pass on such benefit while quoting. |
| 36 | Taxes, Duties and Levies: The quoted rates/prices shall be inclusive of all applicable taxes, duties, levies, cess and other statutory charges applicable to the Contract, except GST wherever required to be indicated separately in the Price Format. |
| 37 | Study of Contract Documents: The Bidder shall thoroughly study the Scope of Work, Technical Specifications, Special Conditions of Contract, Price Format and all other applicable Contract documents before submission of the offer. The quoted rates/prices shall be deemed to have been arrived at after considering all requirements stipulated therein. |
| 38 | Applicable GST - The Bidder should quote the GST, clearly indicating the rate and the amount of GST included in the bid and the description of the respective service (as per GST rules) under which the GST is payable. |
| 39 | Scope of Quoted Rates: Unless specifically identified as separately payable in the Price Format, the quoted rates/prices shall include all engineering/design, manpower, supervision, materials, consumables, tools, tackles, plant, machinery, equipment, transportation, handling, loading/unloading, shifting, temporary arrangements, testing, inspection, certification, commissioning, documentation and all incidental/ancillary activities necessary for complete and satisfactory execution of the respective work. |
| 40 | Indicative Quantities: Quantities indicated against the unit-rate items in the Price Format are indicative/estimated and have been provided for bid evaluation purposes only. Such quantities shall not be construed as guaranteed or final quantities to be executed under the Contract. Payment shall be made based on the actual quantities satisfactorily executed, measured and duly certified by ONGC, at the respective accepted unit rates, in accordance with the applicable provisions of the Contract. |
| 41 | Material Wastage: The Bidder shall consider material wastage, cutting/fabrication allowances and other applicable wastage while arriving at the quoted rates. No separate payment shall be admissible for such wastage. Payment shall be based on the actual measurable quantity of completed work. |
| 42 | Each Price Format item shall be read in conjunction with the corresponding Scope of Work, Technical Specifications, drawings and other Contract requirements. Any material, component, accessory, service or incidental activity necessary for complete and satisfactory execution of an item shall be deemed included in the quoted rate unless specifically identified as separately payable in the Price Format. |
| 43 | HVAC Upgradation – Ducting Works Complete ducting works specified in the Scope of Work, including removal, modification and/or replacement of existing ducting and associated duct-side works, shall be included in the quoted price for HVAC Upgradation, and no separate payment shall be admissible unless a separate applicable Price Format line item is specifically provided. Steel renewal, structural modification/fabrication, pipe renewal/new piping, valves and surface preparation & painting associated with HVAC Upgradation shall be paid separately wherever separate applicable Price Format line items are provided. |
| 44 | Supply & Retrofit Replacement: “Supply & Retrofit Replacement” shall include dismantling/removal of the existing equipment/item, supply of completely new equipment/item, necessary equipment-side/interface adaptations, installation, alignment, connection, testing, certification and commissioning, as applicable, complete as specified in the Scope of Work, except works specifically identified as separately payable. |
| 45 | Supply, Crop and Renewal: “Supply, Crop and Renewal” shall include identification/marking as applicable, cropping/removal of the existing item, preparation, supply of new material/item, fabrication, fit-up, installation, joining/welding/bolting, testing and all associated activities required for complete renewal, except activities specifically identified as separately payable. |
| 46 | OEM / Equipment Package Boundary All equipment, components, accessories, integral piping/tubing, valves, instruments, internal cabling, OEM skid/base frame, guards, supports and other items forming part of the OEM/package equipment shall be included in the respective Equipment Replacement/Retrofit Replacement/SITC/Upgradation rate unless specifically identified as separately payable. |
| 47 | Helideck Renewal – Associated Works For Helideck Renewal works under Chapter-10, steel renewal, structural modification/fabrication, piping/pipe structural works and surface preparation & painting shall be measured and paid separately under the respective applicable Price Format line items based on actual quantities executed and duly certified by ONGC. Any associated work required for complete Helideck Renewal for which no separate applicable Price Format line item is available shall be deemed included in the respective Helideck Renewal price. |
| 48 | Steel Renewal / Structural Modification – Surface Preparation & Painting Initial abrasive blasting and shop primer/holding primer specified for new steel supplied for steel renewal/structural modification shall be included in the applicable steel renewal/structural modification rate and shall not be separately payable. Post-fabrication/post-installation surface preparation, including preparation of weld seams, HAZ, cut edges and field joints, touch-up/stripe coating and intermediate/final coat(s), shall be measured and paid separately under the applicable Surface Preparation & Painting Price Format items wherever provided. |
| 49 | Pipe Renewal / New Piping – Surface Preparation & Painting Galvanizing of new pipes/fittings, wherever specified, shall be included in the applicable pipe renewal/new piping rate. Subsequent surface preparation and painting/coating of renewed/new/modified piping shall be measured and paid separately under the applicable Surface Preparation & Painting Price Format items where required by the specified Painting Scheme. |
| 50 | Equipment Painting Factory/shop painting, preservation and marine-duty protective coating of new/replacement equipment, including OEM skid/base frame and integral package components, shall be included in the respective Equipment Replacement/SITC/Upgradation price. Surface preparation and painting of rig-side steel renewal, structural modifications, foundations, stools, supports and piping associated with equipment replacement/upgradation shall be paid separately under the applicable Price Format items wherever such separate items are provided. |
| 51 | Painting – Number of Coats and DFT The Bidder shall consider the complete coating system and number of coats necessary to achieve the specified Dry Film Thickness (DFT) in accordance with the Scope of Work, approved Painting Scheme and paint manufacturer's recommendations. No additional payment shall be admissible merely on account of additional coat(s) required to achieve the specified DFT. |
| 52 | Insulation Works Rates for insulation shall include supply and installation/renewal of insulation of the specified thickness, including fastening, joint treatment, sealing, vapour barrier, protective covering/cladding and all associated materials, accessories and works required for complete insulation as specified in the Scope of Work. Payment shall be based on the actual insulated surface area in m² and actual insulation thickness executed, duly measured and certified by ONGC. The rate specified for the respective base insulation thickness in the Price Format shall be applied on a pro-rata basis for any variation in insulation thickness from the specified base thickness. |
| 53 | Pre-Engineering Survey, Design and Engineering - The Contractor shall carry out all necessary pre-engineering/pre-construction surveys required for execution of the respective jobs. Unless specifically identified as separately payable, all required design/engineering, calculations, drawings, procedures and other technical documentation shall be included in the respective quoted rates/prices. |
| 54 | Classification Society Requirements and Approval - The Contractor shall obtain review/approval of designs, drawings, calculations, procedures and other documents from the applicable Classification Society, i.e. ABS, IRS or both, wherever required under the Contract. Unless specifically provided as a separate Price Format item, costs associated with such design review/approval, surveys, inspections, documentation and certification shall be included in the applicable quoted rates/prices. |
| 55 | Testing, Certification and Documentation - Applicable inspection reports, test certificates, material certificates, calibration certificates, NDT reports, commissioning reports, OEM reports/certificates, Class/TPI documentation, O&M manuals, as-built drawings and all other documentation required under the Scope of Work shall be included in the respective quoted rates/prices unless specifically identified as separately payable. |
| 56 | Measurement of Works and Certification - Measurement of steel renewal, structural modification/fabrication, pipe renewal/new piping, valves, surface preparation & painting, insulation and any other unit-rate works shall be based on the actual quantity satisfactorily executed at site, in the respective Unit of Measurement (UOM) specified in the Price Format, and duly measured and certified by ONGC. Measurement shall be based on the final executed/installed quantity and relevant approved drawings, field measurements, material records and/or other supporting documents, as applicable. The detailed basis and methodology of measurement for each category of work shall be as specified in the respective Scope of Work, Technical Specifications and applicable provisions of the Contract. No payment shall be admissible for wastage, off-cuts, rejected materials, temporary works, rework attributable to the Contractor, or quantities not forming part of the final accepted work, unless specifically provided otherwise in the Contract. |
| 57 | Separate Price Format Items – Associated Works and Payment - Since the exact quantities of steel renewal, structural modification/fabrication, pipe renewal/new piping, valves, surface preparation & painting and other associated works that may become necessary in connection with Equipment Replacement, Supply & Retrofit Replacement, SITC, Upgradation, Helideck Renewal and other applicable jobs cannot be accurately quantified at the bidding stage, indicative quantities for such works have been included under the respective applicable line items of the Price Format under Chapter-1, Chapter-2, Chapter-3 and Chapter-11, as applicable. Wherever such works are required during execution, they shall be measured and paid separately under the respective applicable Price Format line items, based on the actual quantities executed, measured and duly certified by ONGC. Accordingly, the Bidder shall not include the cost of such separately identified works in the quoted price of the respective main job. However, any material, component, accessory, modification, service or associated work necessary for complete and satisfactory execution of the respective main job for which no separate applicable line item is available in the Price Format under Chapter-1, 2, 3 & 11 shall be deemed included in the quoted price of the respective main job, and no additional payment shall be admissible. |
| 58 | Two (02) Years Operational Spares – Equipment Replacement / SITC / Upgradation For all Equipment Replacement, Supply & Retrofit Replacement, SITC and Upgradation works, wherever provision of 02 (Two) Years Operational Spares is specified in the respective Scope of Work, the Contractor shall supply the complete operational spares required for 02 (Two) years of normal operation along with the respective equipment/system. Such operational spares shall be as specified in the Scope of Work and/or recommended by the OEM, as applicable. The cost of such 02 (Two) Years Operational Spares, including procurement, packing, preservation, identification/tagging and delivery to ONGC, shall be included in the quoted price of the respective Equipment Replacement/Retrofit Replacement/SITC/Upgradation item, unless a separate Price Format line item is specifically provided for such spares. No additional payment shall be admissible. |
| 59 | No Duplicate Payment: No activity, material, manpower, equipment, consumable or service shall be paid more than once under different Price Format items. Where an activity/work is expressly or inherently included in one applicable Price Format item, no separate payment for the same shall be admissible under another item. |
| 60 | Price Format to be Read with Scope of Work: Descriptions given in the Price Format are abbreviated and shall not be construed as limiting the Contractor's scope or obligations. Each Price Format line item shall be read in conjunction with the corresponding Job Description, Scope of Work, Technical Specifications, drawings, approved procedures, applicable codes/standards, Classification Society requirements, Special Conditions of Contract and all other applicable Contract documents. |
| 61 | Limiting Charges – Inward Towing The amount quoted by the Bidder towards Inward Towing (sum of Sr No. 733 to 736) shall not exceed 4% of the Total Basic Amount/Price of the Contract, excluding GST. In case the quoted amount exceeds the aforesaid limit, the amount payable towards Inward Towing shall be restricted to 4% of the Total Basic Amount/Price of the Contract, excluding GST, notwithstanding the amount quoted by the Bidder. |
| 62 | For Indian Bidders:- Definition of Import Content: Total value of goods, works, or services sourced from outside India. Indian bidders are required to quote in INR only. However, Indian bidders can quote and receive payment in foreign currency to the extent of their import content indicated above. The payment towards GST will be made by ONGC in Indian rupees as per actuals. The bidder shall specify the foreign currency in which payment for the declared import content is requested. Payment against each invoice, limited to the declared import content portion, shall be made in specified foreign currency. The import content portion/percentage will be deducted from INR invoice value and paid in foreign currency. Foreign currency conversion from INR for the purpose of payment of the declared import content will be governed as follows: a. The closing currency exchange rate as applicable on the day prior to the price bid opening as per \\"Daily\\" Closing exchange rate published on Thomson Reuters internet site https://in.reuters.com/markets/currencies, upto three places of decimal, will be taken into account for conversion of INR into foreign currency. The exchange rates presently appearing on the right-hand corner of the exchange rate chart of the said internet site shall be considered as closing rate for the day. b. Where the time lag between opening of price bid and final decision exceeds three months, the currency exchange rate as above on the day prior to date of final decision will be adopted for conversion of INR into Foreign Currency. |
| 63 | For Foreign Bidders: Definition of local content: Total value of goods, works, or services sourced in India including Indian Agent Commission and excluding GST Advisory Note: The declared local content above should not be lower than the \\"Local Content confirmed under the Public Procurement (Preference to Make in India) (PPP-MII) Order, 2017, dated 19.07.2024 (as amended from time to time), issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Government of India, under Order No. P-45021/2/2017-PP(BE-II)-Part(4) Vol.II. Foreign bidders can quote the price and receive payments either in Indian Rupees or US Dollars or Euros or Pound Sterling or Yen or other relevant currencies, or a combination thereof. However, prices for goods, works, or services (including Indian Agent Commission) sourced in India must be quoted and shall be paid by ONGC only in Indian Rupees to the extent of their Local Content indicated in the bid. In all cases, Indian Agent commission shall be paid in INR only. Payments toward each invoice, corresponding to the local content specified in the bid, shall be made in INR. The local content portion /percentage will be deducted from forex invoice value (as per contractual rates) and paid in INR. Conversion from the quoted foreign currency to INR shall be carried out based on the following: a. The closing currency exchange rate as applicable on the day prior to the price bid opening as per \\"Daily\\" Closing exchange rate published on Thomson Reuters internet site https://in.reuters.com/markets/currencies, upto three places of decimal, will be taken into account for conversion of foreign currency into Indian Rupees. The exchange rates presently appearing on the right-hand corner of the exchange rate chart of the said internet site shall be considered as closing rate for the day. b. Where the time lag between opening of price bid and final decision exceeds three months, the currency exchange rate as above on the day prior to date of final decision will be adopted for conversion of foreign currency into Indian Rupees. |
| 64 | Foreign currency payment will not exceed the quoted import content and payment will be regulated accordingly.However, total payment (including payments made in foreign currency) shall not exceed the lumpsum awarded price |
| 65 | Note on Invoicing Instructions:Indian Contractor: The Contractor shall raise separate invoices for the foreign currency component (attributable to and limited to the extent of quoted import content) and INR components of the Contract Price.Foreign Contractor: The Contractor shall raise separate invoices for the foreign currency component and INR component [attributable to the quoted Local Content {including but not limited to Goods, Works and / or Services (including Indian Agent’s Commission, wherever applicable) sourced / provided from within India} to be quoted, invoiced and paid for in INR only and not in foreign currency].Common to Indian and Foreign Contractors:Under no circumstances shall foreign currency and INR amounts be commingled or included in the same invoice. The foreign currency invoice shall be processed for payment in accordance with the provisions of the Contract and shall further be subject to applicable RBI regulations, foreign exchange regulations, and other prevailing statutory requirements.” Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 36 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 38 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender