Tender for Tender for New Construction Of Bilsad Raja Karampur Road To Bilsad Mandir To Chandanpur Aproch Road
Tender Value
1.15 Crore
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
7.79 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Etah → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for New Construction Of Bilsad Raja Karampur Road To Bilsad Mandir To Chandanpur Aproch Road
BOQ
| Sl. No. | Item Description |
| 1 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 2 | Granular Sub-base with Well Graded Material (Table 400.1). Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material. I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 3 | WBM Grading 3 (using Graded Metal) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 4 | CEMENT CONCRETE PAVEMENT (C.C. ROAD) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with OPC 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick plastic sheet, wedges steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous opration including provision of contraction and expansion construction joints applying debonding strips primer, sealant admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 5 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 6 | Supply, laying and fixing of NP3 class hume pipes in proper position in culvert. For 350 mm dia I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 7 | Supply, laying and fixing of NP3 class hume pipes in proper position in culvert. For 600 mm dia I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 8 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 9 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1202&1203 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 10 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 11 | Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification clauses 613 & 1204 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 12 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 13 | Ordinary kilometer stone (precast)Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Complete as per Direction Engineer in Charge I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 14 | Hectometer stone (precast)Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Complete as per Direction Engineer in Charge I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 15 | Retro Reflectorised Signs (Stainless steel Frame and Post with both side sings) Supply & fixing of reflective sign board (both side) of size 1.50×1.20 m retro reflective sheeting of HIP grade type-IV, the board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4 mm thick, ACM sheet of standard make as per MORTH specification. The Board shall be fixed using 2 man post 45×45×60 cm cement concrete foundation. The stainless steel joint welding of SS pipe work shall be band and grinder property including buffing so an 10 give uniform shining at wedded joints. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal. adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MORTH specification No 801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. As per SOR Ch. 6 Item No. 26 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 16 | Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 17 | Providing concrete for plain/reinforced concrete (Nominal Mix 1:3:6) in open foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203 P.C.C. grade M 10 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 18 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203 M-25 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 19 | Providing concrete for plain/reinforced concrete in open Sub Structure complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203 M-25 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 20 | Supplying, Fitting and Placing HYSD bar reinforcement in Foundation complete as per Drawing and Technical Specifications. Clauses 1000 and 1202 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 21 | Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications. As per Morth Specification 1600& 2200 I/C cost of material, labour, T&P and all Taxes but Excluding GST |
| 22 | Maintenance Charges for Cement Concrete Road Part Maintenance Charge including repair of Concrete work, earthwork on patri etc complete as per direction of E.I. for the period of five years from the actual date of completion of work.For First Year. |
| 23 | Maintenance for Second Year Cost of total executed Cement concrete Part Work |
| 24 | Maintenance for Third Year Cost of total executed Cement concrete Part Work |
| 25 | Maintenance for Fourth Year Cost of total executed Cement concrete Part Work |
| 26 | Maintenance for Fifth Year Cost of total executed Cement concrete Part Work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender