Tender For Round-The-Clock Operation And Maintenance Of Electro-Mechanical Equipment Of 2.00 Mg Clear Water Booster Pumping Station Under Panihati Municipality For The Year Of 2027 - 2029.
Tender Value
67.74 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Round-The-Clock Operation And Maintenance Of Electro-Mechanical Equipment Of 2.00 Mg Clear Water Booster Pumping Station Under Panihati Municipality For The Year Of 2027 - 2029.
BOQ
| Sl. No. | Item Description |
| 1 | Round the clock operation & minor maintenance of the Pumping Station with adequate number of working personnel for each month as per direction of the EIC. [7 Man per Month] |
| 2 | For the period of First year |
| 3 | For the period of Second year |
| 4 | For the period of Third year |
| 5 | Checking of all the Mechanical parts and preventive maintenance of all pump machinary as per technical specification and scope of work and direction of the EIC. [Twice in week] |
| 6 | For the period of First year |
| 7 | For the period of Second year |
| 8 | For the period of Third year |
| 9 | Checking of all the Electrical parts including Battery Bank and preventive maintenance of all pump machinary as per technical specification and scope of work and direction of the EIC . [Twice in week] |
| 10 | For the period of First year |
| 11 | For the period of Second year |
| 12 | For the period of Third year |
| 13 | Supervision of all the staffs & look-after the entire pumping station to ascertain the overall condition of all the electro-mechnical equipment and conveying the same to the EIC or his authorized representative and to carry out the instructions given by them within the stipulated time frame. [Twice in week] |
| 14 | For the period of First year |
| 15 | For the period of Second year |
| 16 | For the period of Third year |
| 17 | Cleaning of the Pump House & the equipment including supply of consumable like soap, phenyl Duster , mop etc. (Once in Week) |
| 18 | For the period of First year |
| 19 | For the period of Second year |
| 20 | For the period of Third year |
| 21 | Supplying of the following consumable materials for minor maintenance of all the Electro-mechanical equipment. |
| 22 | Supply of Cotton (Hydraulic) Gland Packing |
| 23 | Supply of Grease ( NLGI Gr. 2 ) |
| 24 | Indicating Lamp for Panel Only |
| 25 | HRC Fuse Links (Rating: 2A-16 A, ) |
| 26 | HRC Fuse Links (Rating: 32A, ) |
| 27 | Rotary Handle |
| 28 | Supply of MCB |
| 29 | Supply and delivery of extended rotary handel of MCCBs.a) Extended rotary handle 16-100A, 415V(Make: L & T/ABB/ Schneider/Simence) |
| 30 | DIN Type HRC Fuse Links . (Rating: 700 A, 700 V)(Make : Bussmann,ABB, Siemens, schneider) |
| 31 | 20W LED Batten Light [Make : - Phillips or equivalent] |
| 32 | LED Highbay 120 Watt [Make : - Phillips or equivalent] |
| 33 | LED 90 Watt Street light fittings.(Type : - BRP333 LED110 CW R5C FG PSU S1 V1)[Make : - Phillips or equivalent] |
| 34 | Transformer Oil |
| 35 | Dehydration of Transformer Oil |
| 36 | Opening the transformer breather and refifling the same after changing the silica gel including the supply of necessary gasket and silica gel. |
| 37 | 150 mm diaphram type glycerine filled pressure gauge (Range as required) [Make : - Hguru or equivalent] |
| 38 | 600 millimeter Air Circulator Type Electric Fan with 3 Blades as per direction of EIC.( Make : EPC / Marathon / Crompton ) |
| 39 | Servicing & overhauling of BFV gearbox by dismantling, inspection & checking thoroughly, cleaning of the gear box, minor repairing & replacement of of spare parts as required, apply grease properly on worm-gears etc, reassembly of whole set up all complete as per the direction of E.I.C. |
| 40 | Supply, fitting- fixing and commissioning of 316 SS Sensor piezoresistive Sensor digital pressure transmitter with IP 67 protection, having output voltage of 4 to 20 mA for individual and common delivery pipe line along with calibration as per direction of EIC.( Make : ABB / Danfoss / Forbes Marshall / Endress + houser ) |
| 41 | Alignment of the pump motor after necessary adjustment for required matching of faces to the flexible coupling within allowable tolerance |
| 42 | Maintenance and overhauling of over head travelling crane as per manufacturers instruction manual with all tools, tackles, cleaning materials etc. This job includes checking of all parts such as long travel & cross travel gear box, main hoist gear box, auxiliary hoist gear box, LT & CT travelling roller wheels, rope drum assembly, shank hook and block sheave/pulley assembly etc. by replacing / reconditioning defective parts (spares cost excluded) such as shaft, gears, pinions, reducing gears, bearings, plummer blocks, couplings and proper alignment with motor and changing of damaged oilseals and filling of gear oil, applying grease at all moving point for smooth and trouble free operation as per direction. ( Up to 5 Tonne single girder EOT crane) |
| 43 | Cleaning, Refilling, Hydro testing of Existing ABC type fire extinguisher of 6 K.G. capacity with change of damaged spares including removing from site & re-fixing after refilling. |
| 44 | Opening the following Exhaust fan (1 Phase/3 Phase) /Stand Fan/Cabin Fan testing, checking, Re-winding by supplying super enamelled copper wire of appropriate gauge, minalex paper, mica sheet, changing the loops, overhauling, becking, varnishing, re-fifling and testing and measuring r.p.m. etc. 3-Ph Exhaust Fan (24” or 60 cm dia sweep) |
| 45 | Painting of heavy duty Exhaust fan/Stand Fan/Cabin Fan in following sizes complete with 2 coats of paints with ready- mix paint/primer of approved make and brand including preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of synthetic enamel paint. |
| 46 | Cleaning compound premises of shrubs, plants, jungles etc. by cutting and removing as directed ( specific permission of Engineer-in-charge prior to execution will be necessary) |
| 47 | Cess @ 1% |
| 48 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender