Tender For Special Repair Work Of 08 X Qtrs (P-29/01 To P-29/08) Md Accn Of 508 Abw Chheoki Mil Stn
Tender Value
47.66 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
14 days left
EMD
95320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Work Of 08 X Qtrs (P-29/01 To P-29/08) Md Accn Of 508 Abw Chheoki Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | Date Corrigendum | Date | 10-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars etc complete all as specified and directed. |
| 2 | Taking down chowkat with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down chowkat with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each and removing from site complete all as specified and directed. |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | Description same all as per item No 4 here-in-before but size 50mm x 125mm |
| 6 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S&F with stainless steel butt hinges ( 04 Nos each shutter) of required size (100mm) with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. |
| 7 | S&F 30mm thick plain WPC factory made glazed skeleton door shutter (conforming as per IS- 4020) with density not less than 600 Kg/Cum, manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water proof, termite proof , fire retardant and having screw holding capacity, all as per manufacturers specification & drawnings, complete all as specified and directed.Note : Required stainless steel butt hinges and necessary SS screws shall be included and stainless steel wiremess also included. |
| 8 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100mm x 8mm sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed.Note : Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 9 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28mm to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded pre-laminated PVC Sheet on the front face & 2mm pre-laminated PVC sheet on back face as per specification & drawing, complete as specified and directed. |
| 10 | S&F aluminium section powder coated of colour as approved openable sliding type, three track window/ventilators with sliding shutter and frame, series C with aluminium section of size including 5mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed.(i) Frame section 92 x 31.75 x 1.20mm(ii) Shutter top bottom and side rails 39 x 20 x 1.50mm.(iii) Glass 5mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc complete.(iv) Aluminium grill 7.5mm dia design no. DG-102 make DECO grill & design no AL-103 make fixed to aluminium section 50x20x1.5 mm in existing opening. (v) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tracks or galvanised wire staple complete |
| 11 | M&L in repair for fabrication and fixing of powder coated anodised window and ventilator openable type with frame of section 85mm x 44.50mm x 1.56mm with shutter style and rail orf powder coated aluminium section of size 47.62mm x 44.45mm x 1.62mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip beading screw etc for fixing glass panes in framesshutter strip beading screw etc for fixing glass panes in frame shutter covered with fully selected quality glass 4mm thick with rubber packing complete each shutters of window shall be provided with one aluminium tower bolt and one handle of size 150mm, two stainless steel hinges of size 100mm, aluminium stay 01 No, 2 Nos 150mm aluminium tower bolt with etc complete all as specified and dircted. |
| 12 | S&F powder coated aluminium grills of bar size 6mm x 5mm with square gap of size 75mm fixed with suitable aluminium channel of size 12 to 15mm section complete all as specified and directed . |
| 13 | S&F in repair mild steel 300mm ordinary rat tail rod pattern springs incliding roller and roller plate complete all as specified and directed. |
| 14 | S&F in repair sheet glass shelf assembly 60 cm long, 12 cm wide, made out of 5.5mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed. |
| 15 | M&L for 3mm thick figured (one side) glass ordinary quality and glazing with oil putty or wooden beads in square, area not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 16 | S&F in repair 18mm / 19mm thick prelaminated medium density fibre board, commercial type, interior grade adhesive as in cup board shutters/shelves and pelmets etc, fixed with screw/nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed. |
| 17 | M&L 12mm thick coloured MDF board with hardwood fibres prelaminated both sides including cutting, screwing as in kitchen cabinet, almirah shelf, wadrobe including teakwood liping 6mm thick with necessary lipping complete all as specified and directed. |
| 18 | M&L 6mm thick coloured MDF board with hardwood fibres prelaminated both sides including cutting, screwing as in kitchen cabinet, almirah shelf, wadrobe including with necessary lipping and fixing complete all as specified and directed. |
| 19 | S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed. |
| 20 | S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed. |
| 21 | S&F in repair 75mm hasp and staple safety type mild steel, wire type stove enamelled black including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 22 | S&F 150mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy fixed complete all as specified and directed. |
| 23 | M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exceeding 6 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 24 | Description same all as per item No 23 here-in-before but except brick (brick used obtained from demolition) |
| 25 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 in half brick thick walls complete all as specified and directed. |
| 26 | Taking down cement plaster on brick or stone walls including wall tiles etc, with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 27 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed. |
| 30 | M&L for sunken floor treatment as in following sequence, complete all as specified and directed :- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material, fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 Ltr/Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 Kg per Sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed. |
| 31 | M&L for cement concrete 1:5:10 type E2 (40mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed. |
| 32 | M&L for 32mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed. |
| 33 | Cutting holes in full brick walls, built in cement mortar for inserting of sunken pipe, holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 34 | Supply only Liquid Water Proofing Compound (ISI marked) complete all as specified and directed. |
| 35 | Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 36 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and directed. |
| 37 | Removing of surplus excavated/demolised materilas to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed. |
| 38 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. Note - Average thickness shall not exceed 40mm complete all as specified and directed. |
| 39 | M&L for rendering 10mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 complete all as specified and directed. |
| 40 | M&L for normal water proofing treatment on roof slab consisting with following operations :-(i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Ltr/Sqm on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm i.e overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor, complete all as specified and directed.Note - (i) The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers'(ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane.(iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above. |
| 41 | M&L for white porcelain cool roof tiles 300mm x 300mm x 15mm thick with a matte finish on roof including 20-30mm thick layer of cement mortar 1:4, insert 3-4 mm tile spacers between each tile and fill with water proof grout or white cement complete all as secified and directed. |
| 42 | Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75mm / 110mm, set in cement mortar complete all as specified and directed. |
| 43 | S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110mm bore complete all as specified and directed. |
| 44 | S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75mm bore complete all as specified and directed. |
| 45 | S&F PVC (SWR) bends any radius, 75mm bore complete all as specified and directed. |
| 46 | S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and directed. |
| 47 | S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed. |
| 48 | S&F in repair stainless steel plate rack (utensil rack) of size 900mm x 750mm x 260mm made out of stainless steel 0.63mm thick fixed with brass screw complete all as specified and directed. |
| 49 | M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, coping errection of posts etc complete all as specified & directed. |
| 50 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with screw are galvanised wire staple complete all as specified and directed. |
| 51 | S&F 100mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 52 | S&F for 150mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 53 | S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 54 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc, complete all as specified and directed. |
| 55 | S&F 200mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 56 | S&F 300mm stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 57 | S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed. |
| 58 | S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed. |
| 59 | S&F MS framed work as in doors frame, doors or gates of angle iron, door frame or other section with gusset plate, rails, braces, grill, hold fast, barrel iron doors, ladders, frame balusters, walk way, railing, frame work of water tank etc complete, drilled for fixing of steel sheeting or other covering etc to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 60 | S&F in repairs 600mm long tubular towel rail, brass chromium plated of 20mm dia complete all as specified and directed. |
| 61 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 62 | S&F in repair 20mm dia stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified. |
| 63 | Dismantling mild steel work of any description in any position complete all as specified and directed. |
| 64 | M&L preparation of newly steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed. |
| 65 | Demolition of cement concrete of any desription and in any position not otherwise specifically provided for complete all as specified and directed. . |
| 66 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 67 | M&L for 25mm thick PCC Type B-0 1:2:4 (using 12.5mm graded stone aggregate) as in leveling/sub base of flooring complete all as specified and directed. |
| 68 | M&L for coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM (1:6) etc complete all as specified and directed complete all as specified and directed |
| 69 | M&L for coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting, dados etc laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 70 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 71 | M&L for joint free glazed ceramic coloured tiles of size 350mm x 250mm or 450mm x 300mm & 6 to 7mm thick on vertical surface of walls such as in dado, skirting etc, including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 72 | M&L for 20mm thick black granite (dark coloured) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed. |
| 73 | M&L for endura floor tile size 300mm x 300mm x 10mm thick and 25mm thick laying in floor jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed as per manufacturer instruction all as specified and directed. |
| 74 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coats oil bound distemper of any colour over a coat of primer over 1 to 2mm wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 75 | M&L for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 76 | M&L for preparation of new surface and providing and applying and painting two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 1-2mm thick extrior putty existing on cleaned/primered surface by Mechanical spraying/painting machines) as per manufacturer's specifacation etc, all complete including all tools, plants scaffolding, safety belts complete all as specified and directed. |
| 77 | Complete removal of existing treatment i.e white wash, colour wash, distempering etc of wall complete, applying a coat of 1 to 2mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc, complete as per manufacturer's instructions and directed at site and applying two coats of oil bound distemper over a coat of primer (any colour complete all as specified and directed. |
| 78 | M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing, rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc, and providing and applying and painting two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 1-2 mm thick exterior putty existing on cleaned/primered surface by mechanical paint sprayers on exposed brick wall/plain wall surface) as per manufacturer's specifacation etc, all complete including all tools,plants scaffolding, safety belts complete all as specified and directed |
| 79 | M&L for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying two coat of white wash on wall complete all as specified and directed. |
| 80 | M&L for preparation of old plastered or unplastered decorated surfaces of ceiling including cornices etc and applying one coat of distemper oil emulsion white or tinted on ceiling complete all as specified and directed. |
| 81 | S&F in repair two way angle valves/tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 82 | S&F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore for WHB complete all as specified and directed. |
| 83 | S&F in repairs wall mixerss with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed |
| 84 | S&F in repair CP stop valve/angle valve 15mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed. |
| 85 | S&F in repair vitreous china wash down water closet of \\"Orissa\\" pattern size 580mm x 440mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed. |
| 86 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed. |
| 87 | Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 88 | Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 89 | S&F SDR11 (Class 1) CPVC water tubes, ISI marked, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 90 | S&F SDR11 (Class1) CPVC water tubes, ISI marked, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 91 | S&F in repair vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. |
| 92 | S&F in repair for 15mm bore fancy type bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 93 | S&F in repair CP Stop valve/angle valve 15mm bore, fancy type cromimum plated, high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed. |
| 94 | S&F in repair rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed. |
| 95 | S&F in repair 20mm gun matal ,glove or gate valve with iron wheel head, srcrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 96 | S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and directed. |
| 97 | S&F in repair PVC connection 15mm size with P.T.M.T nuts of length 450mm complete all as specified and directed. |
| 98 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 99 | M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified and directed. |
| 100 | M&L PCC 1:4:8 type D2, using (40mm graded aggregate), 75mm thick as in sub base of flooring complete all as specified and directed. |
| 101 | M&L machine cut Kota stone slab flooring 20-25mm thick over 15mm screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and including granite polish on Kota slab stone complete all as specified and directed. |
| 102 | Description same all as per item No 101 here-in-before but on vertical surface such as dado, skirting etc over 10 mm thick skirting in CM 1:4 |
| 103 | Demolition of cement concrete in roofs, floors, beams, staircase, landing, chhajjas and similar suspended works complete all as specified and directed. |
| 104 | Form work to to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves, including support, overhangs etc complete all as specified and directed. |
| 105 | Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide complete all as specified and directed. |
| 106 | Form work to chajjas and similar items including edges for rough finished flat surfaces of concrete complete all as specified and directed. |
| 107 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in chajjas complete all as specified and directed.Note : Reinforcement to be measured separately. |
| 108 | Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 109 | M&L for providing cement concrete (1:2:4) type B1 using 20mm graded aggregate as in roof kerbs or mud stops, rouded or chamfered on edges complete all as specified and directed. |
| 110 | S&F of mils steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including milds steel wire (annealed) not less than 0.90mm dia oe securing with clips complete all as specified and directed. |
| 111 | Description same all as per item No 110 here-in-before but 6 to 8mm dia. |
| 112 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 113 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials from site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 114 | Taking down main switches, distribution boards and cut outs etc, of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed. |
| 115 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed. |
| 116 | M&L for point wiring concealed in wall complete with PVC insulated unsheathed, 1100 Volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring and modular sunken box, cover plate/frame any module as required at site with accessories as specified for one light/fan point controlled by one, one way switch including 1.5 Sqmm FRLS type PVC insulated unsheated cable multi-stranded green colour, cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 117 | Description same all as per item No 116 but one 3 pin, 5 Amps socket outlet on independent board |
| 118 | Description same all as per item No 116 but 3 pin, 5 Amps socket out let on the same board with other switch complete all as specified and directed. |
| 119 | Description same all as per item No 116 but one bell/buzzer point controlled by one push button on the same board with other switches or independent |
| 120 | Description same all as per item No 116 but for one socket outlet 16 Amps on independent board with 2.5 Sqmm cable and 2.5 Sqmm earth wire. |
| 121 | S&F modular switch 1 way, 6 Amps, 230 Volts AC, one way complete all as specified and directed. |
| 122 | S&F modular socket outlet 2-in-1, 3 pin, 6 Amps flush type 2 module complete all as specified and directed. |
| 123 | S&F modular switch flush type 16 Amps, 230 Volts AC single pole one way complete all as specified and directed. |
| 124 | S&F modular socket out let 2-in-1, 3 pin, 5 & 16 Amps flush type 2 module complete all as specified and directed. |
| 125 | S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 Watt, socket size including connection complete all as specified and directed. |
| 126 | S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 127 | S&F Ceiling Rose, 3 terminal, PVC/Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 128 | S&F modular bell push flush type 6 Amps, 1 module SP, 230 Volts AC complete all as specified and directed. |
| 129 | S&F electric bell ding dong type AC 230 Volts, 50 Hz single polecomplete all as specified and directed. |
| 130 | S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 200 Amps rated bus bar confirming to IS 13032, BS 5484 (IP 42) of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 131 | S&F MCB Single Pole and neutral, 6 to 32 Amps 240 Volts, 10 KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. |
| 132 | S&F MCB Single Pole, 6 to 32 Amps 240 Volts, 10 KA breaking capacity, convenient to 'B' Curve complete all as specified and directed. |
| 133 | S&F MCB Single Pole, 40 to 63 Amps, 240 Volts, 10 KA breaking capacity, convenient to 'B' Curve complete all as specified and directed. |
| 134 | Taking down existing old/worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified and directed. |
| 135 | S&F wall mounted LED fitting fancy type (City -1 type) with 9 Watt LED built inverter type including making connection with 2 core PVC insulated sheathed copper conductor cable of size 23/0.0076, complete all as specified and directed. |
| 136 | S&F LED batten Tube Light surface/wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10 Watt (2 feet 10 Watt) luminaire lumen >1000 Lm, system efficiency of >120 lumens/Watt, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed. |
| 137 | S&F LED light fitting 10 Watt bulkhead luminaires in high pressure die cast aluminium housing, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 138 | S&F 1 x 20 Watt LED wall mounted tube light fitting (inverter type), 120 Lumen/Watt, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. |
| 139 | Supply and fixing building security light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50mm x 6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
| 140 | Supply and fixing building security light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50mm x 6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender