Tender For Repair/Maintenance Of Door/Window Etc For Md/Otm Accn Of Dad At New Cantt Prayagraj
Tender Value
44.94 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
19 days left
EMD
89880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Door/Window Etc For Md/Otm Accn Of Dad At New Cantt Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each leaf complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and directed. |
| 3 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 4 | Refixing shutters in the same opening of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed. |
| 5 | S&F MS Steel single/double rebated door frame of size 10mm5 x 60mm /125mm x 60mm of approved shape and size including necessary fixing lugs, hinges, lock strike plate, rat tail rod etc complete all as specified and directed. Note : Rat tail rod shall be paid separatly. |
| 6 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 7 | M&L mild steel framed work such as grills, grates etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts, expanded metal (work to be executed any height) etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 8 | M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed. |
| 9 | M&L for preparation of new or previously untreated surfaces of wood of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 10 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50mm x 100mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : M.S Hold fast/lugs or SS dash fasteners shall be paid for separately. Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65mm x 125mm double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless Steel butt hinges shall be paid separately. |
| 13 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg/Cum manufactured by an ISO-9001-2015 certified company , door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19mm x 6mm size steel screws etc., manufacturer's specification & drawings complete all as specified and directed. Note : Stainless Steel butt hinges shall be paid separately. |
| 14 | S&F in repair Brass Mortice Lock, 4-6 Lever fixed to aluminium doors complete all as specified and directed. |
| 15 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg complete all as specified and directed. |
| 16 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box with stainless steel cover fixed to aluminium doors complete all as specified and directed. |
| 17 | S&F 125mm long, 12mm dia SS Dash fasteners for door frames etc including necessary drilling etc complete all as specified and directed. |
| 18 | S&F 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed. |
| 19 | S&F 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 20 | S&F 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed. |
| 21 | S&F 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed. |
| 22 | S&F SS door stopper double 75mm long having rubber bush 25mm dia fixed to door shutter with steel screw complete all as specified and directed. |
| 23 | S&F in repairs 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed. |
| 24 | S&F in repairs 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 25 | S&F in repairs 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed. |
| 26 | S&F in repairs 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed. |
| 27 | S&F aluminium powder coated door shutter of section 104mm x 44.45mm X1.5mm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinge/pivot, aluminium snap beading screws etc including fully selected quality tinted glass 5mm thick with rubber packing complete all as specified & directed. |
| 28 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and directed. |
| 29 | S&F powder coated aluminium window & ventilator sliding type (two track) with track section 61.85mm x 31.75mm x 1.5mm thick, sliding shutter 38.00mm x 18mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose, aluminium strip beading screw, shelf closing locking arrangements etc including fully selected quality glass 5mm thick with rubber packing complete all as specified & directed. |
| 30 | S&F powder coated aluminium window & ventilator sliding type (three track) with track section 92mm x 31.75mm x 1.5mm thick, sliding shutter 38.00mm x 18mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose, aluminium strip beading screw, shelf closing locking arrangements etc including fully selected quality glass 5mm thick with rubber packing complete all as specified & directed. |
| 31 | S&F in repairs of aluminum powder coated grill of size 75mm x 75mm x 4mm thick for windows, including joining cleat, aluminium strip beading, necessary screws complete all as specified and directed. |
| 32 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 33 | S&F of powder coated aluminium partition with frame of section 62.3mm x 38.0mm x 1.5mm, including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose, anodized aluminum strip beading screw etc including selected quality glass/ACP/PVC boards as required of 5mm thick with rubber packing complete all as specified & directed. |
| 34 | M&L in repairs for 4.80mm thick tinted sheet glass and glazing with EPDM rubber beads fixed to aluminium doors/windows in square, area exc 0.50 Sqm in each pane complete all as specified and directed. |
| 35 | S&F 12mm thick milky white frosted toughened glass acid wash/sand blasted glass for doors, fixed glazing, railing, partitions etc with necessary holes for providing SS fittings and including locks, two nos 600mm long SS handles, bottom and top patch & pivots, SS round door stoppers, hydraulically double action floor springs, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof etc complete all as specified and directed. |
| 36 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 12mm thick toughned glass, complete all as specified and directed. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Please Enable Macros to View BoQ information |
| 37 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 12mm thick toughned glass, complete all as specified and directed. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender