Tender For General-Pathanamthitta- Dp- 2026-27 -Project No (43) -Special Repair Of Poly Houses And Installation Of Modern Irrigation Systems At Ssfpullad-General Civil Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Pathanamthitta- Dp- 2026-27 -Project No (43) -Special Repair Of Poly Houses And Installation Of Modern Irrigation Systems At Ssfpullad-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | REPAIR AND MAINTENANCE OF POLYHOUSE AND INSTALATION OF IRRIGATION FACILITIES |
| 2 | OD3189/2026-2027:Dismantling existing UV sheet from rain shelter without damaging the existingstructure, Stacking of servicable material and disposing unservicable material within50m leads |
| 3 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 4 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 8 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). |
| 9 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 10 | 10.16.3:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes |
| 11 | OD3256/2026-2027:Supplying and Laying 200 micron UV stabilized,5 layer,90% light transmission polyfilms on the GI truss work with aluminium channels of approximate weight - 140 gm/rmtrs, Double Spring Locking 0.8mm thick, Smooth Edges , Flat Bottom and PVC coated zig zag springs of 2.2mm Dia and excellent elasticity without damaging the poly film. The channels fixed on the trusses using self drill screws Galvanized, with hex washer. All other items than Polyfilm paid separately |
| 12 | OD3253/2026-2027:Supplying and Laying 40 mesh insect proof netting sufficient to cover all vents of the structure |
| 13 | OD3255/2026-2027:Supplying and Laying 250 micron UV stabilized fibre reinforced skirting polyfilms on the GI truss work with aluminium channels of approximate weight - 140 gm/rmtrs, Double Spring Locking 0.8mm thick, Smooth Edges , Flat Bottom and PVC coated zig zag springs of 2.2mm Dia and excellent elasticity without damaging the poly film. The channels fixed on the trusses using self drill screws Galvanized, with hex washer. All accessories except polyfilm paid separately. |
| 14 | OD3254/2026-2027:Supplying, Fixing and Laying 70% green/black shadenet on the movable shadenet screening as open close system without damaging shadenet with manual rolling systems including all frame works and necessary fittings at a user comfortable height. |
| 15 | OD3257/2026-2027:Supplying, Fixing and Laying 50% green/black shadenet on the movable shadenet screening as open close system without damaging shadenet with manual rolling systems including all frame works and necessary fittings at a user comfortable height. |
| 16 | OD3184/2026-2027:Supplying and fixing Aluminium locking profile with zigzag spring and liftingg and locking arrangement |
| 17 | 13.100.1:Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 18 | OD3251/2026-2027:Supplying fixing disc filter 2" 130 microns 25 m3/ hr flow rate made of high tough and stiff pplastic material with standing a pressure of 10 kg/cm2 with excellent weather and chemical resistance |
| 19 | OD3205/2026-2027:Supply and Fixing 2" inch Ventury Set |
| 20 | OD3264/2026-2027:(100.9.6. + 100.98.211) Supplying and Laying uPVC pipes of class 2 to class 6 and specials, placing in position, along the structure of the polyhouse aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure : 63 mm nominal outside diameter pipes. |
| 21 | OD3207/2026-2027:Supply and Fixing 63 mm ball valve |
| 22 | OD3265/2026-2027:(100.9.5. + 100.98.210) Supplying and Laying uPVC pipes of class 2 to class 6 and specials, fixing on the polyhouse structural members, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes. |
| 23 | OD3261/2026-2027:Supply and Fixing 50 mm ball valve |
| 24 | OD3266/2026-2027:(100.9.4. + 100.98.209) Supplying and Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 40 mm nominal outside diameter pipes. |
| 25 | OD3262/2026-2027:Supply and Fixing 40 mm ball valve |
| 26 | OD3250/2026-2027:Supplying and fixing PVC Flush valve 40 mm ( inner diameter suitable for 40mm PVC Pipe and outer diameter suitable for 50mm PVC pipe) |
| 27 | OD3263/2026-2027:Supplying and Fixing 32 mm PP Air Valve Valve |
| 28 | OD3249/2026-2027:Supplying LLDPE laterals 16 mm, UV Stabilised manufactured as per IS:12786 |
| 29 | OD3200/2026-2027:6mm LLDPE micro tube |
| 30 | OD3191/2026-2027:Supplying and fixing mist with antileak |
| 31 | OD3201/2026-2027:Supply and Fixing Micro sprinkler set |
| 32 | OD3204/2026-2027:Supply and Fixing Aluminium lock Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender