Tender For Construction Of A Dining Hall For The Students Of Melaghar Higher Secondary School Under Melaghar Municipal Council During The Year 2025-26.
Tender Value
6.50 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
13 days left
EMD
13014
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Dining Hall For The Students Of Melaghar Higher Secondary School Under Melaghar Municipal Council During The Year 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soila) By manual means |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:a)1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size). |
| 4 | Providing and laying in position specificed grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level-1 : 1.50 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size |
| 5 | First class brick work in foundation and plinth including cost of all materials as required completea) In cement mortar 1:4 ( 1 cement: 4 fine sand ). |
| 6 | Half brick masonry work with fi_rst class bricks in superstructure upto floor five level including cost of all materials as required complete:- a) In cement mortar 1:4 ( 1 cement: 4 fine sand ). |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo- mechanically Treated bars of grade Fe-500D or more |
| 8 | Centering shuttering including struttings, propping etc.and removal of form work for:c) Lintel, beams, plinth beam, girder,bressumers and cantilevers with shuttering ply. |
| 9 | 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. (1:4)a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand). |
| 10 | Net cement punning |
| 11 | Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brass pillar taps. |
| 12 | Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4kg/ cm2) conforming to IS: 13592 Type A iftcluding jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Single socketed pipe - 11O mm OD |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 14 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated wiih high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge. 11.22.1 |
| 15 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers complete for RidgesNalley/Gutter/Flashing of width 610mm: 11.23.1 0.40mm thickness |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :8.1.3 Local Teak Wood |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick. 8.6.2 Gamair Wood 16 mm Thick |
| 19 | Providing and laying 1st quality ceramic floor tiles of different sizes (thickness to be specified by the manufacture) of 1st quality conforming IS:15622-2017 of approvrd make, in colours white, ibory, gray, fume red brown, laid over 20mm thick cement mortar 1:4(1 cement : 4 fine sand) joint with gray cement slurry @3.3kg/ sqm including pointing the joints with cement and matching pigment its, complete. All complete as per direction of the Engg-in - charged. |
| 20 | Finishing wall with texture exterior paint of required shade of approved brand and manufacture ( paymeent shall be made after submission of test certificate issued by the manufacture) new work (two or more corse applied @ 3.28ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm. |
| 21 | Providing and fixing ball valve (brass of approved quality high of or lowpressure, with plastic floats complete. 25mm nominal bore. |
| 22 | Providing and fixing M.S grills of required patern in frame of windows etc. with MS flats, square or round bars etc. all complete. |
| 23 | Providing wood work in frame of false celling, partition etc. sawn up in position |
| 24 | Providing and fixing plain multipurpose cement bord (high pressure steem cured) as per IS:14862 :2000 with suitable screws for fiber cement bord in ceiling etc. complete as per the direction of Engg in charged.(frame work to be paid seperately) :11.26.1 6mm thick cement bord. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender