Tender For Survey, Design, Construction & O&M Of Water Supply Scheme Consisting Of Supplying & Laying, Jointing & Testing Of Rising Mains, Supply Mains, Distribution Lines, Construction Of Over Head Tank, Building Works, Providing House Service Conne
Tender Value
2438
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
48.40 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Survey, Design, Construction & O&M Of Water Supply Scheme Consisting Of Supplying & Laying, Jointing & Testing Of Rising Mains, Supply Mains, Distribution Lines, Construction Of Over Head Tank, Building Works, Providing House Service Connections Along With Supply & Fixing Of Mechanical Water Meters, Drilling And Development Of Tubewells, Supply Installation Testing and Commissioning of Pumping Plants, Automation Works, Revenue Collection Through Departmental Portal And All Other Appurtenant Works Including Civil & Electro-Mechanical Works Specified In The Bid Document Including Supply Of All Materials, Labour, T&P Etc. Required For Proper Completion Of Work With 07 Year Operation & Maintenance Period (Proposed Works + Existing System), Complete In All Respect For Pashulok (Sirai) Water Supply Scheme Block Doiwala District Dehradun, Under World Bank Funded Uttarakhand Efficient Water Supply Programme (Ewsp).
BOQ
| Sl. No. | Item Description |
| 1 | Review of design, build, operate & management for 7 years of PASHULOK (SIRAI) Water Supply Scheme Block Doiwala District Dehradun, under World Bank funded Uttarakhand efficient Water Supply Programme (eWSP). |
| 2 | Excavation in ordinary soil (loam, clay, sand) for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches. |
| 3 | Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches. |
| 4 | Disposal of surplus excavated earth including loading & unloading and lead upto 5.0 km complete in all respect |
| 5 | Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately |
| 6 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 |
| 7 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 8 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 9 | Providing and Laying of Interlocking Concrete Block Pavements of M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 10 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 11 | Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels,rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications |
| 12 | Providing, Lowering into trenches with true to alignment, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE-80 Grade; PN- 6.0 (6.0 Kg/Cm2)(a) for 90 mm dia pipe |
| 13 | (b) for 125mm dia pipe |
| 14 | Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying & Jointing of full lenght S&S Centrifugally Cast (Spun) Ductile Iron Pipes including supply of 'EPDM' rubber gaskets confirming to IS: 5382-1985, internal cement mortar lining for potable water with testing of pipe line complete including disinfection.D.I. Pipe S&S K-7 for 150 mm dia pipe |
| 15 | ( a) for 200 mm dia pipe |
| 16 | (b) for 250 mm dia pipe |
| 17 | Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying & Jointing of full lenght S&S Centrifugally Cast (Spun) Ductile Iron Pipes including supply of 'EPDM' rubber gaskets confirming to IS: 5382-1985, internal cement mortar lining for potable water with testing of pipe line complete including disinfection.D.I. Pipe S&S K-9 (a) 150 mm dia |
| 18 | (b) 200 mm dia |
| 19 | Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 |
| 20 | Provision for barricading in two rows and necessary diversion of paths and where as necessary with the help of ballies, ropes, flags, signals and light signals etc. as per requirement. Including supply of all material, T&P, etc complete. |
| 21 | Supply of all materials, labours, T&P etc and construct anchor / thrust blocks as per type design complete of following sizes 0.6m x0.6 m x0.75 m |
| 22 | Providing & Fixing D.I D/F Sluice Valve confirming to IS:14846-2000 in position including all material , labour, T & P etc. complete.PN-10(a) 100 mm dia |
| 23 | (b) 125 mm dia |
| 24 | (c) 150 mm dia |
| 25 | (d) 200 mm dia |
| 26 | (e) 250 mm dia |
| 27 | Providing & Fixing Hydrant valve confirming to IS:5290 (Flanged) in position including all material , labour, T & P etc. complete. (a) 80 mm dia |
| 28 | Providing & Fixing D.I D/F Scour Valve confirming to IS:14846-2000 in position including all material , labour, T & P etc. complete.PN-10(a) 100 mm dia |
| 29 | Providing & Fixing Ultrasonic Water Flow Meter for Bulk pipe lines inline type, flange end with Integral mounted, Flow rate & Totaliser display, Battery operated (with five year battery life) Communication : UART/RS485, suitable against antifraud attempts etc. including all necessary fittings complete.(a) 100 mm |
| 30 | (b) 150 mm |
| 31 | (c) 200 mm |
| 32 | Providing & Fixing Pressure Transmitter with LORA communication Battery operator (with one year battery life, rechargable battery) with display , weather proof, operational frequency 865 MHz-867 MHz, Communication : UART/RS485, Pressure ratin upto 16 Kg/ Cm^2 including all necessary fittings etc. complete. |
| 33 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 34 | Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 35 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 36 | Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 37 | Providing & Fixing of house service connections from existing pipe to proposed water supply distribution uPVC/ DI/ CI pipe line upto water meter chamber inside the property using GI pipes for upto 6 metre length. The item consisting of composite pipes of MDPE/ HDPE pipe below the ground level and GI class B pipe above the ground level including supply and fixing of ferrules,Saddle, clamps,ball valve, rubber sheets, tapping, compression fittings ,meter Box, end cap etc, complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer . |
| 38 | P/F AMR compatiable Class-B Water Meter as per 779-1994 or ISO 4064-2005, inferential type multijet, magnetically coupled having dry dial brass bronze body, copper cane / stainless steel register with 5mm thick glass dialer with connecting pieces etc complete. |
| 39 | Installation, testing and commissioning charges of dry dial, inferential type, multijet, magnetically coupled Class-B tamper proof Domestic Water Meters Water Meters with plastic cap, removable mechanism, magnetic drive, hermetically sealed, pre-equipped for remote reading complete with tubular strainer, brass, nuts, as per IS:779:1994/IS:2373-1981/SO: 4064 standard or EEC/MID certification mark shall be with protection class of IP68 arnd nipples, GI pipe, socket stop cock, NRV etc material required for completion of work with facility for wireless AMR water meter with 2 years warranty with strainer anywhere in Uttarakhand of following sizes.15 mm |
| 40 | Providing, Supplying and installation of PP Box to accommodate domestic Water Meter of all sizes inciuding fixing into ground with nails or by any other means such as with hinges including excavation curing etc complete as directed |
| 41 | Wireless meter reading device with display facility (for walk by and drive by) - i Reader for minimum 4000 Metering Points |
| 42 | Annual cloud server charges per water meter |
| 43 | Construction of TubewellTransportation of suitable truck mounted rig machine; air compressor, OP unit, camp equipage, connected T&P and necessary accessories, casing pipe, tube well assembly housing pipe etc including loading, unloading creation and leveling of rig machine upto site of work etc complete in all respect as per direction of Engineer in charge required for drilling and development of TW |
| 44 | i) Erection & Leveling of rig machine at site of work |
| 45 | Drilling of 550 mm dia bore by heavy duty direct rotary Rig machine in alluvial, boulders, pebbles, rocky stone, sticky clay etc from ground level upto entire depth for 300 mm dia linear assembly |
| 46 | Procurement of TW assembly as below 300 mm dia MSERW pipe 7.90mm thick Blind Pipe |
| 47 | 300 mm dia MSERW pipe 7.90mm thick Slotted Pipe |
| 48 | 300 mm Dia Bail Plug |
| 49 | 300 mm Dia MS well cap |
| 50 | 300 mm Dia MS clamp with nuts & bolts |
| 51 | Supply of pea gravel of size 1.6 mm to 4.8 mm |
| 52 | Shrounding of pea Gravels in between boreand tube well assembly upto entire depth of tubewell ordered by the department |
| 53 | Preparing & lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as required at site complete with all T&P required. (i) Fixing of 300 mm dia bail plug with Nut & U- bolt. |
| 54 | (ii) Lowering of 300 mm dia MSERW housing pipe (Plain & Slotted pipe) as required. |
| 55 | (iii) Fixing of 300 mm dia, 8 mm thick tube well cap. |
| 56 | (iv) Fixing of 300 mm dia M.S.D.I. housing clamp. |
| 57 | Dismantling of Rig Machine & Clearance of site after satisfactory completion of work. |
| 58 | Development of T/W by 350 PSI/1400 CFM air compressor unit to the satisfaction of Engineering in charge to give sand free discharge and proper packing of pea Gravels at least for 70 Hrs. |
| 59 | Development of T/W by the suitable submersible OP units complete with Lowering and lifting of pumping plant having 2000 LPM discharge approximate including running of OP unit and weld testing of tube well by V Notch atleast for 60 Hrs to the satisfactory completion of work. |
| 60 | Submersible pump-set :-Submersible pump-set of 1600 lpm cold and clear water against a total head of 120 mt with motor of 75 hp suitable to operate on 415±10% Volts, 3 Phase, 50 C/S A.C. Supply complete.(one no as spare) |
| 61 | Submersible pump-set of 900 lpm cold and clear water against a total head of 120 mt with motor of 40 hp suitable to operate on 415±10% Volts, 3 Phase, 50 C/S A.C. Supply complete.(one no as spare) |
| 62 | SITC of variable frequency drive (VFD) heavy duty for 75 HP submersible motor with MS enclousure (01 No spare) |
| 63 | SITC of variable frequency drive (VFD) heavy duty for 40 HP submersible motor with MS enclousure (01 No spare) |
| 64 | Supply, Installation, Testing & Commissioning of IEC-61439 or IEC-61439-2 Design verified assembly LT Fully Automatic Pump automation control panels having intelligent Field Programmable logic control unit & Auto transformer type pump motor start, run, protect against faults, automatically operated control & management system for Supervisory Control and Data Acquisition System at pumping water supply schemes and 02 years free of cost 24*7 Operation through SCADA & AMC & as per specifications & integration in the existing SCADA software of UJS of Various ratings with GPRS communication unit including cartage from works of manufacturer upto site of work:-(a) 75 HP |
| 65 | (b) 40 HP |
| 66 | P.W. & Earthing Materials -Supply of Three Core Copper: Conductor Flexible PVC Insulated. & Sheathed: Flat Cable without earth continuity conductor for Submersible Motor-Pump generally conforming to IS: 694:1990 (Reaffirmed 1995) revised as IS: 694:2010 or its latest amendment(s)..16 Sq. mm. |
| 67 | MCCB 125 Amp with enclosure box with combinable poly corbonate insulated material suitable for shock proof, rust proof, corrossion proof material and class- II safe IP-65 |
| 68 | Supply of jointing material such as lugs, tapes etc. |
| 69 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm including accessories, and providing masonry enclosure with providing and fixing 25 mm x 5 mm GI strip on surface or in recess for connections with charcoal, salt as required. |
| 70 | Main Piping and Valves -Supply of 150 mm dia. MS column pipe assembly main piping, valves & specials (as per sheet attached) |
| 71 | Supply of Gauges -Supply of 100 mm dial pressure gauge with control cock and fittings of range 0-20 kg/cm2 - 1 No. |
| 72 | Supply of following tools required for maintenance of pumping plants.DE spanner set - 2 SetRing spanner set - 2 SetScrew drivers - 4 Nos.Pliers-2 NoHammer-2 NoPipe Wrench-2 NoScrew Wrench-2 NoChain Wrench 800 mm dia -4 Nos |
| 73 | Supply of chain pulley block of 5 tonne capacity 4.5 mtrs. lift complete with travelling trolley. |
| 74 | Digital clamp type earth resistance meter |
| 75 | Supply of rubber resistance sheet of size 1 m × 2 m × 0.025 m.suitable for 11 KV resistance. |
| 76 | Supply of suitable capacity chlorinator dozer pump |
| 77 | Acessories of above pump set as following: Injector and NRV with PVC pipes etc. |
| 78 | 200 Ltr.Capacity PVC tank. |
| 79 | Starter cum panel |
| 80 | Single phase automatic stabilizer |
| 81 | Chlorine testing kit |
| 82 | Supply of Sodium hypo-chloride (Naocl) solution. |
| 83 | Testing of pumping plants against at site |
| 84 | Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-In-Charge of works. |
| 85 | SITC of 3 phase rolling contact Servo voltage Stabliser outdoor type (voltage range 280-460 V) 150 KVA |
| 86 | Supply, installation, testing and commissioning of ISI Marked 4 core copper flexible cable as per IS: 694:1990 revised as IS: 694:2010 with latest amendments for proper completion of work including 5 years cost free maintenance.70 Sq.mm |
| 87 | SITC of portable trollery mounted silent 160 KVA DG set with AMF panel and acoustic enclousure, earthing etc complete. |
| 88 | SITC of change over switch 200 Amp for operating pumping plant on main / DG set |
| 89 | Automation of Pumping plantSITC of following-IOT software & centralised cloud based system conmplete with data base server, data transfer GSM/ GPRS modem sim, IOT plateform form licenses or subscription and development / customization of control software suitable for managing the strorage, processing analysis of vast amount of real line data by a wed based interface, APIs and other tools including memory card for storage data for a minimum of 30 days in care of power failure / loss of connectivity. |
| 90 | Supply & Fixing of data commmunication gatway devices for data acquisition and communication gatway devices for data acquisition and communication to IOT based cloud server centralized system with stand protocol using wi-fi / GPRS ethenet for atteast 02 months data back up with all accessories. |
| 91 | IOT based Intelligent Energy meter for measuring all electrical parameters such as KWH / KVAH (positive /negative), PF, Hz, P etc. with three phase current and voltage imbalance and HMI / software keypads. |
| 92 | Isolation Transformer (440V step down 220V for protection of site automation hardware) |
| 93 | Over voltage & under voltage trip protection (350 V-450 V) |
| 94 | Auto phase reversal unit for auto phase corrector upto 60 HP |
| 95 | IOT based intelligent Pressure transmitter capable to communicate / transmit data to MIS as well as local control room server for tubewell. |
| 96 | IOT base Electronic flow meter of 200 mm size |
| 97 | IOT based Valve actuators (200 mm size) |
| 98 | IOT base Electronic flow meter of 150 mm size |
| 99 | IOT based Valve actuators (150 mm size) |
| 100 | IOT based Actuator panels. |
| 101 | Hard wired timer circuit for actuators |
| 102 | SITC of depth sensor for tubewell (upto 100 mt range) |
| 103 | Online residual chlorine analizer with 4-20 mA output & RS485 communication, measuring range 0-10 PPM, ambient temprature - 10 to 700 c, cycle time & minute with LCD display, make- Horiba /E&H /Forbes marshal |
| 104 | CCTV camera with 2 MP, IP dome CCTV colour night vision, Dline 2 port POE switch full Giga, D link connector PVC box, complete wireless communication setup and 128 GB memory card. |
| 105 | Industrial type UPS of suitable capacity for control supply of automation |
| 106 | IP 67/IP 68 actuator with panel for distribution line of 250/300 mm size |
| 107 | SCADA software with licence key & installation to existing servor |
| 108 | SITC of hydrostatic level transmitter with non vented presure senso, ultrasonic sensor cable and necessary accessories complete as per technical specification hydrostatic level transmitter should be capable of transmitting data to existing SCADA system and M&E portal. |
| 109 | Signal cabling between RTU/PLC and field instruments including screened / unscreened & control copper cable, etc complete in all respect |
| 110 | Installation and commissioning including all accessories. |
| 111 | Cost of internal and external electrification of pump house.Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. |
| 112 | Wiring for circuit/submain alongwith earth wire with the 2x2.5 sq. mm + 1x2.5 sq. mm earth wire size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required. |
| 113 | Wiring for circuit/submain alongwith earth wire with the 2x4 sq. mm + 1x4 sq. mm earth wire size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required. |
| 114 | Supply and fixing of metal box of 180 mmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required. |
| 115 | Supply and fixing of 6 Way double door way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/ RCCB / Isolator) |
| 116 | Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required. |
| 117 | Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required. |
| 118 | Supply and fixing of 20 W LED tubelight complete in all respect (Bajaj / Philips / Equivalent make) |
| 119 | Supply in fixing of LED external lighting luminaires with mounting bracket etc. complete. |
| 120 | Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of following capacities ( in kiloliters ) and 12 m. staging with 1.00 m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x 1m R.C.C. landing at suitable locations and railed with 3 rows of 20 mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, Supply and fixiing of outlet, inlet, over flow and wash out, incomming,outgoing pipes with necessary sluice valves, pipe pieces (including cost of materials), making bypass arrangement,Railing in top dom with approach stair, flooring 0.60 M wide apron, painting on tank body (Apex Paint two Coat) vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT / M2 and staging 12.00 metre.(i) 700 KL & 24 Mtr. Staging |
| 121 | (ii) 1000 KL & 22 Mtr. Staging |
| 122 | Additional rates for staging per meter height beyond 12 m height including cost of all material, labour,shuttering, scaffolding T&P complete for following capacity ( in kiloliters ) Over Head Tanks(i) 700 KL & 24 Mtr. Staging |
| 123 | (ii) 1000 KL & 22 Mtr. Staging |
| 124 | Construction of Pump house (3.0 mX 3.5 m) cum Operator Room of Size 4.3(m)X 3.0 (m) as per attached drawing and unit estimate. |
| 125 | Construction of Office Building which includes SCADA room, billing room, office space, and a meeting room with toilet facilities as per attached drawing . |
| 126 | Construction of Boundary wall as per attached drawing and unit estimate. |
| 127 | Construction of internal road and drainage |
| 128 | Site Clearance & site development work. |
| 129 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 130 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 131 | Provide weather coat painting (two or more coats) to give an even shade. |
| 132 | Construction of Recharge Pit of Size 1.2 m dia including 230 mm brick wall in cm (1:6) upto depth .55 meter including supply of filter media of different size and different layer and construction of bore of 150 mm dia and 13 meter deep. |
| 133 | Provision for Environment, social health and safety compliances as per act, bylaws, norms, rules/statutory provisions and as mentioned and bid documents management. GIS mapping of complete water supply scheme including Intake works, Rising main, Water Treatment Plants, Pump House, Gravity Mains, Distribution Networks, Water Reservoirs, Valves, Pressure Relief valves, Flow meter, Fire Hydrant, Air Valves and other appurtenant works etc. incuding GIS mapping of House Service Connections. |
| 134 | Trial and Run for 4 months including repair and maintenance, staff, chemicals, laboratory water quality test and incentives for O&M agency all newly constructed water supply scheme along with existing infrastructure which will be rentent and part of completed scheme for furture operation and maintenance as wholestic water supply system complete in all respect as per direction of engineer in charge.. |
| 135 | Operation & Maintenance of water supply system for 07 years including repair and maintenance of all structures, maintain water quality throught chlorination and assurance through water testing, leakage rectification, resolving all complaints, providing water tankers during sceracity of water/no water complaints, bill distribution, revenue collection by deployment of revenue officers, assurence of safty measure through deployment of chokidar etc.complete in all respect. The scope of work during phase 3 simillar to O & M work mentioned in bid document i.e for phase -3 complete including all tubewells, submersible pump set, motors, starter panels, flow meters, MCS, PLC/SCADA, instrumentation and allied equipment complete, including operation, preventive and breakdown repair, maintenance, manpower, spare, consumables, tools & tackles, all incidential works, including diesel and excluding electricity cost, complete in all respects as directed by Engineer-in-Charge. O&M - During First Year |
| 136 | O&M - During Second Year |
| 137 | O&M - During Third Year |
| 138 | O&M - During Fourth Year |
| 139 | O&M - During Fifth Year |
| 140 | O&M - During Sixth Year |
| 141 | O&M - During Seventh Year Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender