Tender For Construction Of 11 Kv Distribution Network With 250 Kva Distribution Sub-Station, Lt Ab Cable Line, Underground Cable And Allied Electrical & Civil Works For Brutang Irrigation Project.
Tender Value
48.98 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
8 days left
EMD
49000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 11 Kv Distribution Network With 250 Kva Distribution Sub-Station, Lt Ab Cable Line, Underground Cable And Allied Electrical & Civil Works For Brutang Irrigation Project.
BOQ
| Sl. No. | Item Description |
| 1 | MATERIALS OF DP With AB SwitchWPB (GI) Pole 160x152 11 Mtr. Long for DP |
| 2 | GI Channel, angle & flat of different size |
| 3 | DMC Insulator for LA (70/10) |
| 4 | Danger Plate |
| 5 | H.T. Stay clamp |
| 6 | H.T. Stay set (Complete ) |
| 7 | H.T. Stay Insulator Type-C |
| 8 | 7/10 SWG Stay Wire |
| 9 | Gi Pipe Earthing 40mm. 3 Mtr. Long |
| 10 | GI barbed wire anticlimbing device |
| 11 | Lightning Arrester(12KV,10KA) (Station Class,class-2) |
| 12 | 11 KV pin insulator polymer |
| 13 | H W fitting(B&S) 70KN, 3Bolt |
| 14 | Disc insulator (B&S) 70 KN polymer |
| 15 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR |
| 16 | POLYCARBONATE BIRD GUARD |
| 17 | GI Nut , Bolt & Washer of different sizes |
| 18 | Fixing of HT complete Stay Set with all accessories and civil works |
| 19 | Concreting of Pole @ 1:1.5:3(M-20 Grade) |
| 20 | Construction of Earthing chamber incuding earthing pipe and civil works |
| 21 | GIS Mapping, indexing/numbering of Poles |
| 22 | Painting of Pole in Black & Yellow strips/Zebra |
| 23 | Materials for 11kV Pin Points with WPB55 sq.mm AAA conductor |
| 24 | Supply & laying of 0.07 km for 11 kV 3C, 95 sq.mm. U/G Cable with 1 run spareSupply PortionSupply of 11kV, 3Core, 95sqmm, XLPE insulation armoured UG cable (SC rating of cable in kA- 9kA and SC rating of Armour in kA-9kA) |
| 25 | Supply of Outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, HT UG Cable kits |
| 26 | Supply of materials for High Density Polyethelene (HDPE) pipe160mm diameter, PE 80- PN8 for laying of 11kV UG cable |
| 27 | Erection PortionLaying, Commissioning & Testing of 11kV, 3Core, 95sqmm, XLPE insulation (extruted type) UG cable by open trench method. |
| 28 | Erection of Straight through jointing Kits/Outdoor termination kits/Indoor termination Kits Heat Shrinkable type suitable for 11kV,3Core, 95sqmm, aluminium UG cable kits |
| 29 | Laying of 160mm dia PE 80-PN8, HDPE pipe inside open trench. |
| 30 | Earth work excavation of soil |
| 31 | Earth work excavation of hard rock |
| 32 | Back filling with excavated soil outside and above the trench |
| 33 | Cable Trench with RCC Wall |
| 34 | Supply and Erection of Cable Route Marker along the cable route atan interval of 30mtrs with civil works |
| 35 | GIS coordinate mapping, drawing preparation and submission ofthe same for New/Existing line |
| 36 | 9 Mtr. long PSC Pole |
| 37 | Pole clamp for EYE hook for (XLPE Aerial bunched Cable) |
| 38 | EYE hook for XLPE Aerial bunched Cable |
| 39 | Dead End Clamp suitable for messenger XLPE Aerial bunched Cable |
| 40 | LT Stay set Complete |
| 41 | 7/12 SWG GI stay wire, Grade -2 |
| 42 | LT stay Clamp |
| 43 | LT Stay insulator |
| 44 | 250 KVA , 11/ 0.4 KV (Cu) Transformer with Tap Changer BIS Energy Loss level II, Ammendment-4 |
| 45 | LT Distribution Box for 250 KVA S/S |
| 46 | 55 SQ.MM. AAAC XLPE Covered Conductor |
| 47 | 1 Cx 630 mm2 LT XLPE Cable(Un-Armoured) |
| 48 | 1.1kV, 4Core, 150 sqmm, XLPE insulation armoured -Aluminium UG cable |
| 49 | HDPE pipe of 110 mm diameter, PE 80- PN8 |
| 50 | AB Switch(11KV,200A.3pole,50Hz) (1 no. extra considered for tapping DP point C in SLD) |
| 51 | DO.Fuse( 11KV.200A.3Pole) |
| 52 | 20 AMP Fuse Link |
| 53 | HT stay Clamp |
| 54 | HT stay insulator TYPE-C |
| 55 | 7/10 SWG GI stay wire, Grade -2 |
| 56 | GI Nuts & Bolts of Assorted size |
| 57 | PCC ratio 1:3:6(M-10 Grade) For DSS Area |
| 58 | Supplying, Laying, spreading and compacting with hand roller stone aggregate ofspecified sizes: 63 mm to 45 mm size stone aggregate |
| 59 | Fixing of LT complete Stay Set with all accessories and civil works |
| 60 | LTDB Plinth |
| 61 | DTR Plinth |
| 62 | Laying of 110mm dia PE 80-PN8, HDPE pipe inside open trench. |
| 63 | Laying of 4 Cx 150 mm2 LT XLPE Cable |
| 64 | Laying of 1.1kV cable from 400 to 1000sqmm |
| 65 | SITC of Aluminium Lugs suitable for 630 sq mm cable/conductor |
| 66 | SITC of Aluminium Lugs suitable for 150 sq mm cable/conductor |
| 67 | SITC of double Compression Flameproof Type Glanding for armored Cable 1C 300-1000 sqmm |
| 68 | SITC of termination kit of 1.1kV 3.5C/4C 150-240 sqmm |
| 69 | SITC of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 120-185sqmm |
| 70 | GIS coordinate mapping, drawing preparation and submission of the same for DSS. |
| 71 | SITC of DCP Extinguisher (6KG) |
| 72 | SITC Display Board/Sign Board |
| 73 | GI chain link fencing for DSS |
| 74 | GI flat for danger plate and anticlimbing device |
| 75 | LT Stay set Complete |
| 76 | 7/12 SWG GI stay wire, Grade -2 |
| 77 | LT stay Clamp |
| 78 | LT Stay insulator |
| 79 | Suspension Clamp with EYE hook for ABC |
| 80 | 4C×70 mm² (P)+1C×70 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable) |
| 81 | Insulated piercing connector.Type-A-main 50 to 150 sq.mm & Tap-50 to 150 sq.mm |
| 82 | Coil Earthing |
| 83 | Danger plate (LT) |
| 84 | Laying of 1.1kV 4Cx95 mm2 XLPE U/G cableSupply of 1.1kV, 4Core, 95 sqmm, XLPE insulation armoured -Aluminium UG cable |
| 85 | Supply of Outdoor termination kits Heat Shrinkable type suitable for 1.1kV, 4Core, 95sqmm, HT UG Cable kits |
| 86 | Supply of 1.1kV Multimeter PanelSupply of 1.1kV I/C-160A & 20 no.s of O/G 32A |
| 87 | Supply of 1.1kV I/C-160 A & 10 no.s ofO/G 32A |
| 88 | Earthing for Multimeter PanelEarthing Conductor: 50X6 mm (2.4kg./mtr.) Flat(GI) for equipment, structure etc.) |
| 89 | Laying, Commissioning, Testing of 1.1kV, Aluminium, XLPE insulation armoured UG cable by open trench methodLaying of 1.1kV, 4Core, 95 sqmm, XLPE insulation armoured -Aluminium UG cable |
| 90 | Laying of 110mm HDPE Pipe in Open Trench |
| 91 | SITC of Gland & Lugs/ AL TERMSupply and erection of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 50-95sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly .Supply to be doneas per TPCODL Spec and approved make dowells. |
| 92 | SITC of Aluminium Lugs suitable for 95 sq mm cable/conductor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender