Tender For Development Of Open Space At Pulamol In Property Bearing S. No.188/4 In Village Sao Jose De Areal In Velim Constituency Under Mlalad Scheme.
Tender Value
39.60 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
4 days left
EMD
79202
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Open Space At Pulamol In Property Bearing S. No.188/4 In Village Sao Jose De Areal In Velim Constituency Under Mlalad Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavationby mechanical means(hydraulic excavator)/manual means infoundation pipelinetrenches drain (notexceeding 1.5 m in widthor 10 sq.m. on plan)including dressing of sidesand ramming of bottomslift upto 1.5 m includinggetting out the excavatedsoil and disposal of surplusexcavated soil as directedwithin a lead of 50 m.;Allkinds of soil |
| 2 | Rubble packing with hardlaterite stone under floorsincluding wateringramming and consolidatingetc. in pipeline trenchesand other foundationscomplete. |
| 3 | Providing and laying inposition cement concrete 1:2:4 (1 cement : 2 coarsesand: 4 graded granitic orbasaltic stone aggregate 40m nominal size) excludingcost of centering shutteringand finishing :;All worksupto plinth level |
| 4 | Laterite masonry in neatlydressed stones of size asspecified in cement mortar1: 4 (1 cement : 4 coarsesand) in foundation andbasement. |
| 5 | Extra for laterite masonryin all sizes insuperstructure from floor Ilevel upto floor V level. |
| 6 | Centering and shutteringincluding struttingspropping etc. and removalof formwork for :;ColumnsPillars piersabutmentsposts and strut squarerectangular polygon inplan. etc. |
| 7 | Steel work in built uptubular (round square orrectangular hollow tubesetc.) (Square HollowSection (SHS) IS4923/Rectangular HollowSection (RHS) IS4923/Circular Hollow Section(CHS) IS1161 closedStructural Steel of (SAILTATA. VIZAG JSWAPOLLO Steel Ltd.) make(Min Yeild Stress 310Mpa)) trusses etc.including cutting hoistingfixing in position andapplying a priming coat ofapproved steel primerincluding welding andbolted with special shapedwashers etc. complete. |
| 8 | Painting two or more coats(excluding priming coat)with superior quality readymixed paint for steel workof approved brand &manufacture in all shadeson new work to give aneven shade. |
| 9 | Providing and fixing rigidPVC S.W.R. (soil waste &rain water drainage pipesof approved includinglubricant etc. complete(single/double) socketed:;110 mm dia |
| 10 | Providing and fixing rigidPVC bend (approved make) for S.W.R. pipesincluding lubricating etccomplete bend with door :;100 mm dia |
| 11 | Providing and fixing singletee of rigid PVC (approvedmake) for S.W.R. pipesincluding lubricating etc.complete without door:;110 mm dia. |
| 12 | Providing and fixingNICKEL chrome platedcopper alloy Fancy BIBCock Short Body Jaquarmake or equivalent.Confirming to IS 8931;1993;15mm nominal bore |
| 13 | Providing and fixingASTM UPVC pipeconforming to ASTM 2467with ISO 14001 includingall UPVC plain & brassthreaded fittings includingjointing of pipes & fittingswith one step UPVCsolvent cement trenchingrefilling & testing of jointscomplete as per directionof Engineer. Externalwork.;SCH-40(blue)/(white);20mm outer dia. |
| 14 | Providing and fixingASTM UPVC pipeconforming to ASTM 2467with ISO 14001 includingall UPVC plain & brassthreaded fittings includingjointing of pipes & fittingswith one step UPVCsolvent cement trenchingrefilling & testing of jointscomplete as per directionof Engineer. Externalwork.;SCH-40(blue)/(white);40mm outer dia. |
| 15 | 18mm cement plaster intwo coats under layer12mm thick cement plaster1:5 ( 1 cement : 5 coarsesand) and top layer 6mmthick with cement plaster1: 3 (1 cement : 3 coarsesand) finished with sponge. |
| 16 | Refilling the pipeline/foundation trenches plinth sides Page 4 of 16foundation etc. withavailable excavated earthin layers not exceeding 20cm depth consolidatingeach layer ramming andwatering lead upto 50 Mand all lifts and disposal ofsurplus earth as directed byEngineer in Charge. |
| 17 | Construction ofembankement withapproved material obtainedfrom borrowpits with alllifts and leads transportingto site spreading grading torequired slope andcompacting with Staticroller to meet requirementof Table 300-2 as perMORTH specification 305 |
| 18 | Clearing grass and removalof rubbish upto a distanceof 50 m outside theperiphery of the area |
| 19 | Supplying and filling inplinth under floorstrenches includingwatering rammingconsolidating dressingcomplete.;Sand |
| 20 | Supplying and filling inplinth under floorstrenches includingwatering rammingconsolidating dressingcomplete.;Moorum |
| 21 | Providing Walking track ofEPDM of minimum 15mmThickness. first LayerPrimer on asphalt sub base,second Layer of Shock Padwith SBR Granules 1-4mmsize mixed with PUBinder, third layer ofEPDM mixed with PUBinder installed over theSBR layer. Layers to beinstalled post completedrying of the previouslayer Including allmaterial, Labour,transportation, etccomplete as directed byEngineer in Charge. |
| 22 | Providing and fixingprefabricated compoundgate of G.I. pipes 40 – 50mm dia (medium) with12mm M.S. square bars ofG.I. pipes grill work as perdrawing includingproviding & fixing lockingarrangements pintals holdfast embedded in cementconcrete 1:2:4 (1 cement: 2coarse sand : 4 granitic orbasaltic aggreate 20mmnominal size) includingapplying priming coat withready mixed red lead paintand painting 2 or morecoats with superior readymixed paint of approvedbrand and manufacture inall shades as per directioncomplete. |
| 23 | Painting three or morecoats with acryllic exteriorpaint of approved brandand manufacture (Such asDulex/ Asian Paints/Sherwin Willians)including applying onecoat of cement primer andone coat of surfacetreatment etc. complete. |
| 24 | Providing and fixingcolour coated galvuliumroofing sheets of 0.5mmthickness including all theaccessories (TATA make)but excluding the cost ofpurlins rafters trussesflashings etc. complete asper the directions of theEngineer in charge. |
| 25 | 12mm cement plaster 1:4(1 cement : 4 fine sand) |
| 26 | Proving and fixing whitevitreous china water closetsquating (European type w.c. pan) with seat and lid C.P. brass hinges and rubberbuffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) withfittings rack bolts 32 mmdiameter P.V.C. telescopicflush pipe with fit tingsand clamps 25mm P.V.C..over flow pipe withspecials & mosquito proofcoupling of approvedmunicipal design andnylon. chain and pullcomplete cutting andmaking good the walls adfloors where required.;W.C. pan with white plasticseat and lid. |
| 27 | Providing and fixingvitreous china wash basinwith RS or C.I. bracketspainted white 15 mm C.P.brass pillar taps C.P. brasschain with rubber plug 32mm C.P. brass waste ofpattern 32 mm diameter M.I. or C.P. brass trap andunion complete includingcutting and making goodthe walls where required.;Flat back wash basin size550 x 400mm with a pairof single 15 mm C.P. brasspillar taps. |
| 28 | Providing and fixing 1stquality ceramic glazedwall tiles (JohnsonSomany Kajaria )conforming to IS:15622(thickness to be specifiedby the manufacture ofapproved make in allcolours shades exceptburgundy bottle greenblack of any size asapproved by Engineer-in-charge in skirtingrisers of steps and dadosover 12 mm thick bed ofcement mortar 1:3 (1cement : 3 coarse sand )and jointing with greycement slurry @3.3kg persq.m including pointing inwhite cement mixed withpigment of matching shadecomplete.;Wall CeramicGlazed Tiles : 300 x 600 |
| 29 | Providing and and laying antiskid floor tiles 12 x 12upto 16 x 16 in of JohnsonSomany Kajaria (thicknessto be specified by themanufacturer) of 1stquality conforming to IS:15622 of approved make inshades as specified laid on20 mm thick cementmortar 1:4 (1 Cement : 4Coarse sand) includingpointing the joints withwhite cement andmatching pigment etc.complete;Dark Shades |
| 30 | Providing and fixing brassstop cock (heavy) ofapproved quality :;15 mmnominal bore |
| 31 | Providing and fixing P.V.C. connection pipe withbrass unions 15 mmnominal bore:;45 cm (18\\")length . |
| 32 | Providing and fixingnahani trap of rigid PVC(approved make ) for S.W.R. pipes includinglubricating etc completewithout door :;110 mm dia |
| 33 | Providing and fixingchlorinated ployvinylchloride (CPVC) pipesconfirming to IS:15778having thermal stability forhot and cold water supplyincluding all CPVC plainand brass threaded fittingsincluding fixing the pipeswith clamps at 1 mt.spacing. This includesjointing of pipes andfittings with one stepCPVC solvent cement andtesting of joints completeas per direction of theEngineer-in-charge. Concealed work(medium duty SDR 13.5pipe) including cuttingchases and making goodthe walls etc.;20 mm dianominal outer dia pipes. |
| 34 | Providing and fixing Hand Shower (Health Faucet)with 8mm dia ABS/brassbody with double lock 1.00m long Flexible tube(Brass plated stainles steelflexible hose) and wallhook of approved qualityconfirming to IS standards. |
| 35 | FRP (Fiber ReinforcedPolymer) Frames withWood Finish ManufactureSupply and Installation(with anchor fastener) ofEPEE or equivalent Goanmake FRP (FiberReinforced Polymer)Frame of cross section asper options below withright angle joint and FRP(Fiber ReinforcedPolymer) laminate madefrom 450 grams per sq.mts(gsm) chop strand glassfiber (matt) andunsaturated polyester resinwith viscosity range of 400/450 centipoises persecond (cps). The core offrame would be filled withseasoned wood as infillmaterial. The slot of framefor door resting will be ofsuitable width so as to takespecified thickness door.The frame will be waterproof as well as mild acid/alkali resistantmanufactured in an ISO9001- 2015 certifiedcompany.;Specified Cross Section;4” x 2” |
| 36 | Wood Finish Wood CoreFRP (Fiber ReinforcedPolymer) Door Shutter.Manufacture Supply andInstallation (includingaccessories as mentionedbelow) of EPEE orequivalent Goan makeFRP (Fiber ReinforcedPolymer) door shutter ofspecified thickness as peroptions below by usingtray system with seasonedhard wood moisture lessthan 17% wooden stylesfor Top rail and lock rails.FRP (Fiber ReinforcedPolymer) laminate madeup of 450 grams per sq.mts(gsm) chop strand matt andunsaturated polyester resinwith viscosity range of 400/450 centipoises persecond (cps) and printedmatt having woodentextures used along withUV Resistant resin to givethe clear texture on thedoor. The core of shutterwill be filled with MR 2ndgrade Block Board. TheShutter to be water proofas well as mild acid / alkaliresistant manufacturedusing RV TIFAC (R VEngineering CollegeBangalore & TechnologyInformation Forecasting &Assessment Council)technology in line with IS13034 1990 test Standardin an ISO 9001 – 2015certified factory.Accessories: i) S. S.Hinges 4” - 3 Nos ii) S. S.Latch - 1 No iii) TowerBolt 5” - 2 Nos iv) Handle 5” - 2 Nos;ShutterThickness;32mm |
| 37 | Providing and applyingwhite cement based puttyof average thickness 1.00mm of approved brand andmanufacturer over theplastered wall surface toprepare the surface evenand smooth complete. |
| 38 | Applying one coat ofcement primer of approvedbrand and manufacture onwall surface. |
| 39 | Wall painting (two or morecoats) with plasticemulsion paint of approvedbrand and manufacture onnew work to give an evenshade. |
| 40 | Applying priming coatwith ready mixed primer ofapproved brand andmanufacture on steel work. |
| 41 | Providing flat iron holdfast 40 cm including fixingto frame with 10 mm diabolts nuts and woodenplugs and embeded incement concrete block 30 x10 x 15 cm 1:3:6 mix (1cement: 3 coarse sand: 6stone aggregate 20 mmnominal size.;40 x 3 mmflat iron hold fast 15 cmlong |
| 42 | Providing and fixing M.S.grill of required pattern inwooden frames ofWindows etc. with M.S.flats square or round barswith round headed boltsand nuts or by by screws.;Plain grill |
| 43 | Providing and fixing 600 x450 mm bevelled edgemirror of superior glass (ofapproved quality) completewith 6 mm thick asbestossheet ground fixed towooden cleats with C. P.brass screws and washers. |
| 44 | Providing and fixinganodised aluminiumshutters in accordance withthe specification annexedherewith includingtransportation, scaffoldingand handling etc. completeas per direction of theEngineer-in-charge: Adjustablelouvered windows.;Figured glass |
| 45 | Providing and fixinganodised aluminiumshutters in accordance withthe specification annexedherewith includingtransportation, scaffoldingand handling etc. completeas per direction of theEngineer-in-charge: windows with twosliding shutters using 18mm series shutters section.;Figured glass |
| 46 | Extra for powder coating with pure polyester powderof shade of required colouron the aluminium section |
| 47 | Providing & fixing liquidsoap container with C. P.brass lid and brackets fixedto wooden cleats with C. P.brass screws;Glasscontainer |
| 48 | Centering & shutteringincluding StruttingPropping & removal offorms for :;Suspendedfloors roofs landingsshelves & their supports |
| 49 | Providing TMT steelreinforcement bars of(SAIL TATA. VIZAGJSW Steel Ltd.) )(Confirming to IS 1786 of1986) for RCC work(conforming to I.S. 1786 of1986) including bendingbinding & placing inposition in all the floorsalong with the factorymade precast concretecover blocks of specifiedsizes whose compressivestrength is not less thanthat of surroundingconcrete in the structuralmember. |
| 50 | Providing and laying inposition machine batchedconcrete (BMC) machinemixed and machinevibrated design mixcement concrete ofspecified grade forreinforced cement concretework including pumping ofconcrete to the site oflaying but excluding thecost of centering shutteringfinishing andreinforcement includingadmixtures inrecommended proportionsas per IS 9103 toaccelerate retard setting ofconcrete improveworkability withoutimpairing the strength anddurability as per the direction of the Engineer-in-charge. M25 grade ofreinforced cement conreteby using 410kg of cementper cu.m. of concrete. Allworks upto floor V level. |
| 51 | Providing anti – termitetreatment to buildingsconforming to I.S.S. 6113part II 1971 (revised)including adoptingprecautions for healthhazards and safetymeasures as requiredtherein with the cost of allmaterials chemicals plantsequipments required forthe treatment andfurnishing a guarantee fora minimum period of 10years from the date ofcompletion includingeradicating any infestationof termite free of costduring the guaranty periodcomplete. (The paymentwill be made on plinth ofthe building.;Pre-construction |
| 52 | Providing and fixingoxidised M.S. sliding doorbolts with nuts and screwsetc. complete;250 x 16mm |
| 53 | Providing and fixingoxidised M.S. tower bolts(barrel type) withnecessary screws etc.complete;200 x 10 mm |
| 54 | Providing and fixingvitrified matt finished(600x600) and 10mm thicktiles in floor treads of stepslanding on 25mm thick bedof cement mortar 1:3 andjointed with cement slurrycomplete. |
| 55 | Providing and placing onterrace roof of floor two(1st flor roof single piecerotational mouldedpolythene water storage tank having I S I mark andconforming to I S 12701;1996.;500 lit. capacity |
| 56 | Constructing brickmasonry manhole orinspection chamber withsecond class bricks incement mortar 1:5 (1cement :5 fine sand) R.C.C. top slab with 1:2:4 mix(1 cement: 2 coarse sand ;4graded stone aggregate20mm nominal sizefoundation concrete 1:2:4mix (1 cement ;2 coarsesand :4 graded stoneagrregate 40mm nominalsize) inside plastering 12mm thick with cementmortar 1:3 (1 cement :3coarse sand) finished witha floating coat of neatcemetn and makingchannels in cementconcrete 1:2:4 mix (1cement :2 coarse sand :4graded stone aggregate 20mm nominal size) neatlyfinished complete as perstandard design.;Insidesize 60 x 60cm and 60cm deep including C.I. coverwith frame (light duty)455x610mm internaldiameter total weight ofcover and frame to be notless than 38 kg. (weight ofcover 23 kg). |
| 57 | Constructing soak pit 1.20m x 1.20m x1.20m filledwith laterite stoneaggregate 125 to 180 mmincluding S.W. drain pipe100 mm diameter and 1.2m. long complete as perstandard design. : |
| 58 | Providing woodwork inframes of doors windowsclerestory windows trusses& other frames wroughtframed and fixed inpositon.;Second classIndian teak wood |
| 59 | Providing & fixing flushdoor shutters of solid core construction with plywoodpanel fixed on either sideof the shutters alongwithpolymer sheet overlaid onthe exterior surface(wooden or equivalent ) asper manufacturersspecifications with secondclass Indian teak woodlipping (not less than 6 mmthick) all round 30 mmthick shutter with brightfinished brass hinges 100 x70 x 4 mm with brassscrews. |
| 60 | Precast plain cementchequered tiles 22 mmthick of required shadeslaid in floors treads ofsteps and landing on 20mm thick bed of Cementmortar 1:4 (1cement : 4coarse sand) jointed withneat cement slurry mixedwith pigment to match theshade of tiles includingrubbing and cleaning etc.complete.;Dark shadesusing ordinary cement |
| 61 | Providing and fixingOctagonal Multi GymStation withLeg Press,Twister Seated, AirWalker, Horse Rider ,Seated Puller, Surf Board,Chest Press, Seat up Boardincluding installation, alllabour, material, tools,transportation, etc asdirected by the Engineer incharge. |
| 62 | Providing and fixing 6seated Merry Go Round ofsize 6' x 6' x 3' of approvedmake including all labour,material, tools,transportation, etc asdirected by Engineer incharge. |
| 63 | Providing and fixingSwing Double seater withfibre seat and structure ofmild steel and size 8' x 8' x8' of approved makeincluding all labour, material, tools,transportation, etc asdirected by Engineer incharge. |
| 64 | Providing and fixing SeeSaw made of powdercoated G.I. structure andlength of 8' of approvedmake including all labour,material, tools,transportation, etc asdirected by Engineer incharge. |
| 65 | Providing and fixing HorseSpring rider of approvedmake including all labour,material, tools,transportation, etc asdirected by Engineer incharge. |
| 66 | Providing and fixing BikeSpring rider of approvedmake including all labour,material, tools,transportation, etc asdirected by Engineer incharge. |
| 67 | Providing and GardenBenches 3 seater made ofcast iron legs with handleand FRP strip wood colorhaving bench weight of 45-50 kgs of approved makeincluding all labour,material, tools,transportation, etc asdirected by Engineer incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender