Tender For Repairing And Rewinding 17.5 / 20 H.P, 3 Phase, 415/440 Volt, 1440 Rpm 15 (Fifteen) Nos Induction Motor For Different Rli Scheme Under Lalgola (Agri-Mech) Sub-Division, Lalgola Murshidabad
Tender Value
3.27 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
13 days left
EMD
6600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Rewinding 17.5 / 20 H.P, 3 Phase, 415/440 Volt, 1440 Rpm 15 (Fifteen) Nos Induction Motor For Different Rli Scheme Under Lalgola (Agri-Mech) Sub-Division, Lalgola Murshidabad
BOQ
| Sl. No. | Item Description |
| 1 | (a) Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C.(i)17.5 H.P/ 20 H.P 3 phase induction motor. |
| 2 | Rewinding with approved quality Super Enamel copper winding wire of standard guage as provided by motor manufacturer including slot insulation as per Indian Electrical Rules, shouldering the cable joints properly, taping with 660 V. Grade water proof tape, making new loop terminals heating and vernishing with 'E' class golden vernish (Jhonson & Nicolson make) so as to develop original rated rpm, supplying all necessary materials as mentioned above and reassemblying the motor..(b) 17.5H.P/20H.P 3 phase ,415 volts ,50 Hz ,2/4 pole induction motor.(i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (18 swg to 22 swg) Required max. weight of super enamelled copper wire is given below: ( 1.) Elech/GEC (New)/crompton/NEC-10.20 Kg,(2) Bicco/AEI-13.1 kg (3) GEC (OLD)-13.5 kgand 16.2 kg(4) kirloskar(new) -9.5 kg and 10.5 kg (5) kirloskar(old)-12 kg,(6)crompton(old)-12.5 kg(6) NGEF-10.5 kg. |
| 3 | Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C |
| 4 | Socketing with C.I socket at enlarged bearing housing of any type of 17.5 HP/20 HP motor by oversizing the bearing housing by machine turning & suppling new socket of required size and fitting the same in bearing housing. |
| 5 | Testing of repaired motor by contious 8 hrs running at nearest site on load after making necessary connection including fitting fixing and shifting to and form just appeared. |
| 6 | Repairing of damage motor shaft by metaling with electric welding and turning properly to house in the bearing space and coupling side teeth and also rectifying the dynamic balance of the rotor to its original alignmrnt to avoide any vibration .All complete as per direction of the EIC. |
| 7 | Painting two coats of both inner & outer portion with best quality synthetic enamel paint (to be approved before use) including smoothing surface by sand paper for removing old paint of the motor as per direction of E.I.C. |
| 8 | Heat varnishing with best quality (Johnson & Johnson/ Dr. Beck/ Giliander) class 'E' insulating varnish of required quantity for 3 course& uniform heating at 80' Cfor 48 hrs. with all cost of materials, labour asperdirection of E.I.C.(c) Insulatingvarnish1 lit for 20 HPinduction motor |
| 9 | Labour charges for carriage of motor from site /dept store to company workshop and back to site/store after repair including loading unloading and installation the motor on the motor base. This item is only applicable when written permission is available from E.I.C Where is no facility for such work in the sub-division |
| 10 | Less Deduction towards dismantled burnt enamelled copper wire from induction motor on the basis of actual measurement to be retained by the agency =153.63Kg153.63 X 351= 53924.13 |
| 11 | Add GST @18% (Sl no. 1 to 8) |
| 12 | Add Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender