Tender For Lifting And Repairing Of Hatch Type Steel Barge At Jigin Govt. Own And Operated Major Rli Scheme In Gazole Development Block Under Gazole (Agri-Mech) Sub-Division Under Malda-I (Agri-Mech) Division Under Non-Plan Maintenance.
Tender Value
5.91 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
16 days left
EMD
11827
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maldah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lifting And Repairing Of Hatch Type Steel Barge At Jigin Govt. Own And Operated Major Rli Scheme In Gazole Development Block Under Gazole (Agri-Mech) Sub-Division Under Malda-I (Agri-Mech) Division Under Non-Plan Maintenance.
BOQ
| Sl. No. | Item Description |
| 1 | Works:- |
| 2 | Labour charges for engagement of 5 nos of unskilled labour/day to tie up the submerged steel barge under the deep water of river by steel wire rope for 4(three) days @ 375 per day |
| 3 | Hire Charge for 1 No. country boat for carring working materials working persons on river to tie up the submerge Twin Hull steel barge under deep water of river by steel wire rope for 3 ( three ) days, Rs.250.00/per day |
| 4 | Hire charge of 3 nos of winch machine for 4 days @ Rs400.00 per day./ per machine. |
| 5 | Labour charges for engagement of 3 nos of skilled labour operating 4 nos winch machine for 3 days @ Rs.454/per day. |
| 6 | Labour charges for engagement of 3 nos of unskilled labour for helping in operation of 3 nos winch machine for 4 days @ Rs.375.00/per unskilled labour /per day. |
| 7 | Labour charges for engagement of 3 nos of unskilled labour for bailing out water cleaning of mud etc from the submerged twin hull steel barge for 4 days @ Rs.Rs.375.00/per unskilled labour/per day. |
| 8 | Labour charges for engagement of 10 nos of unskilled labour for assisting operators for putting & dragging of Twin Hull steel barge on shore and river water including handling of materials required for the works for 4 days @ Rs.375.00/per unskilled labour / day |
| 9 | Hire charges bamboos for sal wood sleeper channel, wire rope etc. for 3 days @ Rs. 100.00/days as per local market. |
| 10 | Shifting of barge from the existing pin point to a suitable working site or place from RLI site and blocking of the barge by area cleareance,earth cutting winching jacking planking block fitting & unjacking & placing of the RLI site including tools, plants for blocking. |
| 11 | Opening, strengthening & refitting of plates, angles. purlines, trusses, bolllard, expanded metal/ BRC net winch etc. as required and as per direction of the E.I.C |
| 12 | Acid treatment and removing rust corrosion etc. from the surface both inside and outside of hulls keels deck of the steel barge throughly as direction of the EIC. |
| 13 | Chipping, scraping wire brushing & cleaning of the painted surface for keel, hull, frame, superstructure deck, fender both inside and outside as per direction of the EIC. |
| 14 | Removing the pump sets installed on the barge from the foundation including disconnection & removal of suction & delivery assemblies from the barge to a secured place and re-fitting the same properly after the maintainence of the barge. |
| 15 | Patch/ doubling work complete with 5 mm thk M.S. plate including welding, gas cutting, fitting, fixing complete.(a) Cost of 5 mm thk M.S. plate including wastage due to cutting, labour charge for straighting, fitting fixing in position. |
| 16 | (b) Gas cutting to required size of 8 mm thk M.S. plate, N.S>C. channel etc. including labour charges , higher charges of all tools and plants. |
| 17 | (c) Electric welding charge for 5 mm thk M.S. plate, M.S> channels etc. and other member of the barge including hire charges of all tools and plants |
| 18 | a) Supplying, fitting & fixing of M.S. angle (Size: 50 mm x 50 mm x 6 mm) includinq gas cuttino etc |
| 19 | b) Supplying, fitting & fixing of M.S. angle (Size: 45 mm x 45 mm x 6 mm) including gas cutting etc |
| 20 | Supplying, fitting & fixing of M.S. flat bar a)40 mm x 6 mm for straightening the B.R.C. net includings gas cutting etc. |
| 21 | b) Supply, fitting & fixing of 75 mm (NB) MS pipe including gas cutting as welding as fender of Barge. |
| 22 | Supply Fitting fixing of MS channels (75 mm x 40 mm x 6 mm) for base of manhole cover including gas cutting. |
| 23 | Suppling, fitting fixing iron hasp bolt of approved quality (oxidized) & socket on the doors including the cost of welding. The bolt would be 30 cm. long and dia of bolt not less than 18 mm. |
| 24 | Supplying fitting & fixing bolt with nut & washers (i) 10 to 16 mm dia. for jointing and fixing the different members of the structurak works. |
| 25 | Cost of Doors ( (6'-0''x3'-0'') by point welding with B.R.C. net(75mmx25mmx10 SWG), 49mmx6mm M.S. flat bar, 6'' hings-4 pcs. 10'' hasp bolts-2nos. Etc. complete as per direction of Engineer-in-Charge. |
| 26 | Suppling, fitting fixing of I.R.C. net (75 mm x 25 mm x 10 swg) with nuts and bolts of the barge including gas cutting etc |
| 27 | Galvanized corrugated iron sheet work (including the supporting frame work) fitted and fixed with 10 mm dia \\"J\\" or \\"L\\" hook-bolts, limpet and bitumen washers and putty complete with 150 mm end lap and one corrugation minimum side lap with 0.63 mm thk sheet in roof |
| 28 | Galvanised iron sheet ridging fitting with necessary bolts, 225 mm end lap eith 0.60 mm sheets, 300 mm lapping each way. |
| 29 | (a) Primming one cote on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surface by sand paper etc. |
| 30 | Painting the metal surface with :(b) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc, if necessary. |
| 31 | Leak proof testing of repaired hull if floating condition on river water with proper endurance test as required for minimum perion of 48 hrs. complete as per direction of the E.I.C. |
| 32 | Transportation charges for carrying of all materials, working device etc. upto the scheme and back |
| 33 | DEDUCTION:- |
| 34 | Deduction towards scrapped MS Plate, MS Sheet, MS Fitting (MS Angle, Bar & channel), MS Rod, GCI Sheet, IRC/BRC Net etc from Barge on the basis of actual measurement to be retained by the agency for disposal . This item includes weighting, handling, carriage, loading, unloading, stacking etc of scrapped materials from RLI Sites. (Inclduding of all labour charges), Convenient weighing arrangement at the RLI Sites would be made by the agency at his own cost. |
| 35 | Add GST 18% |
| 36 | Add Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender