Tender For Rev Ing Of Electrical System For Open Wells (Phase-1) In Anupuram Township.
Tender Value
24.40 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
48800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rev Ing Of Electrical System For Open Wells (Phase-1) In Anupuram Township.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+) Less (-) Tender Inviting Authority: Chief Engineer, Engineering Services Group, GSO, Kalpakkam. Name of Work: Revamping of electrical system for open wells (Phase-1) in Anupuram Township. Tender No: GSO/CTC/ESD/379/2026 Name of the Bidder/ Bidding Firm / Company : PART-II (FINANCIAL BID) Note : 1) This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. 2) Bidders are allowed to enter the Bidder Name and Values only.3) Rates quoted should be inclusive of GST @ 18% and any other taxes as applicable. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item.No. Item Description Item Code / Make Quantity Units Estimated RateinRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE including all taxes in Figures to be entered by the Bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Rates in words Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Unit for Rate TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Design, manufacturing, testing at manufacture's works, packing, transportation, delivery, unloading and storage at site, testing and commissioning of the 415 Volts MCC and detailed specification. |
| 3 | Motor Control Centre Panel at Open well No.8 consist of following:a) 125 Amps, 4 Pole MCCB with magnetic tripping facility with functional indication lamps, 125/5A CT, MFM,CBCT,ELR, Castel interlock as incoming feeders – 1 Set with 1 Key.b) 63 Amps,4 Pole MCCB with Thermal magnetic tripping facility with indication lamps, with 10 HP Star/ Delta Starters including Motor Protection relay as outgoing feeders - 2 Sets. c) 63 Amps, 4 Pole MCCB with Thermal magnetic tripping facility as outgoing feeders - 2 Sets. |
| 4 | Motor Control Centre Panel at SRI Open Well & old Electrical office well consist of following:a) 125 Amps, 4 Pole MCCB with magnetic tripping facility with functional indication lamps, 125/5A CT, MFM,CBCT,ELR, Castel interlock as incoming feeders – 1 Set with 1 Key.b) 63 Amps,4 Pole MCCB with Thermal magnetic tripping facility with indication lamps, with 7.5 HP Star/ Delta Starters including Motor Protection relay as outgoing feeders - 2 Sets.c) 63 Amps, 4 Pole MCCB with Thermal magnetic tripping facility as outgoing feeders - 2 Sets. |
| 5 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 6 | 3/3.5/4 Core x above 25 to 3/3.5/4 Core x up to 120 sqmm |
| 7 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 8 | 3/3.5/4Core x above 25 & up to 120 sqmm |
| 9 | End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 10 | 4 Core x10 sq. mm |
| 11 | 3.5/4 Core x 35 sq. mm |
| 12 | 3.5/4 Core x 70 sq. mm |
| 13 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9). |
| 14 | 25 x 6 mm GI flat |
| 15 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9). |
| 16 | 25 x 6 mm GI flat |
| 17 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 18 | MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 19 | Removal, loading, transportation and unloading of 415 Volts MCC Panel of approx size of 800 mm (L) x 500 mm (W) x 1500 mm (H) within Anupuram Township for safe storage as per the detailed specification. |
| 20 | Supply and replacement of junction box as per the detailed specification and Drg No: GSO/ESG/ESD/ATS/SM-01 as directed by Engineer-in-charge |
| 21 | Three Phase Submersible Junction Box with Connectors |
| 22 | Supply, Replacement / Installation, testing and commissioning of following 3 Core Cu. Flat Type Cable as per the detailed specification and as directed by Engineer-in-charge. |
| 23 | 3 Core 2.5 Sqmm Cu.Cable |
| 24 | 3 Core 4.0 Sqmm Cu.Cable |
| 25 | Wiring for MFM with 6 Runs of 2.5 Sq.mm Copper wires (Average route length is 6 Mtrs) for three Phase from CT to MFM, and 2 Runs of 1.5 sq.mm Copper wire (Average length is 3 Mtrs) from Source to MFM, including Supply of 3 Nos. of 50/5A CT,1 No. of MFM, and DCT etc., as per the detailed specification and as directed by Engineer-in-charge. |
| 26 | Supply, transportation, installation, testing and Commissioning of the following type of BOX type luminaires using ball & socket. (Refer Sec VI, Clause No.16.1). |
| 27 | 20W, 4Feet, IP20, LED Batten Luminaire |
| 28 | Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). |
| 29 | 6W, IP66, LED Bulkhead Luminaire |
| 30 | Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25). |
| 31 | 2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652 |
| 32 | Excavation in hard soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Less (-) 0.0 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Government of IndiaDepartment of Atomic EnergyGeneral Services Organization Centralised Tender Cell TENDER DOCUMENT FOR Revamping of electrical system for open wells (Phase-1) in Anupuram Township. Tender No: GSO/CTC/ESD/379/2026 Part – II : Financial Bid (Section - VIII) INDEX S.No. Title Page No. |
| 33 | GENERAL INFORMATION FOR GUIDANCE OF TENDERERS |
| 34 | The schedule of quantities is to be read for the purpose of pricing in conjunction with the special conditions, general rules for the guidance of contractors, conditions of contract, specifications, scope of work (Section V), and General Specification (Section VI), drawings, schedule of supply of materials and the appendices for complete interpretation of this scope of work quantity wise. |
| 35 | The prices inserted in the schedule of quantities shall be inclusive of value of the work described including all cost and expenses, which may be required in and for the construction of the work described together with the general risks, liabilities and obligations not forth or implied in the documents on which the tender is to be based. |
| 36 | The quantities stated are to be considered approximate only and the unit prices entered in the schedule of quantities and prices shall apply only to the actual quantities measured in the completed work in accordance with the specifications. |
| 37 | Items of work described in brief are detailed under specification of Work.The scope of work will not be estimated from the brief description of this schedule. |
| 38 | Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this schedule or not. |
| 39 | All the materials other than those shown in schedule of supply of materials in section VII are to be arranged by the contractor and his rates should account for the same. |
| 40 | Rates quoted for all items in this tender shall include cost of all materials. Department will not supply any materials other than materials stipulated in Section - VII of the tender and as such the rates quoted must be all inclusive. |
| 41 | If contractors need any clarification they are required to contact the ‘Head, CTC, GSO, Kalpakkam – 603 102, Chengalpattu district, Tamilnadu (Ph – 044 - 27481238 and 044-27480500 Extn. 84299,87345,85803,85532) during office hours. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender