Tender For Provision Of Additional 20 Persons Passenger Cum Bed Lift With Power Mains Arrangements To The Newly Constructed 50 Bedded Critical Care Block In Government Hospital At Paramathi Velur In Namakkal District.
Tender Value
35.73 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
10 days left
EMD
28000
Bank guarantee accepted
Document Fee
28000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Additional 20 Persons Passenger Cum Bed Lift With Power Mains Arrangements To The Newly Constructed 50 Bedded Critical Care Block In Government Hospital At Paramathi Velur In Namakkal District.
BOQ
| Sl. No. | Item Description |
| 1 | Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1No. 20 persons 1360kgs. Capacity Passenger cum Bed Lift (Gearless With Machine Room ) as per the following specifications.1. Location : 50 Bedded Critical Care Block in GH at Paramathi Velur2. No. of Lift : One No3. Type of Lift : Passenger cum Bed Lift with machine room - Gearless model4. Capacity of Lift : 20 Persons / 1360kgs5. Speed : 1.0 mtr / sec6. Type of Drive : V3F Drive with enhanced ride comfort and near Zero Level Functions.7. No. of Floors : Ground floor + 4 Floors8. Total Travel : 15 Mtr / Pit 1600mm / Head room 4500mm9. Leveling accuracy : High level accuracy with smooth and jerk free stopping.10 Construction of : High Quality Car.1.5mm thick hairline finish S.S. Car and Hand rail, garanite/ marble flooring and Perspex False Ceiling. |
| 2 | 11 Position of Machinery : Directly above the Lift well – Gearless with machine room.12 No. of Landings : 5 Nos in the front side. 13 No. of Car Entrance : One in the front side.14 Car Entrance : Power operated V3F Drive, side opening Sliding Stainless Steel (1.5mm) Hairline finish door.15 Landing Entrance door : Side opening Sliding Stainless Steel (1.5mm) hairline finish door with provision for Emergency Exit key at All landings. 16 Lift well : 2200mm (Wide) x 3000mm (Depth) as per IS 14655(Part 1) 2000. Lift shaft available. 17 Lift Pit : 1800 mm (available) Depth.18 Car Size : 1300 x 2400 x 2300 (mm Wide x mm Depth x mm Height as per IS 14665 (Part I) 2000 19 Car Clear Opening of Gates / Doors / Lintel : 1200mm Wide x 2000mm Height and Lintel : 2300mm as per IS 14665 (Part I) 2000 20 Power Supply : 400/415V 3phase 50Hz AC Power Supply.21 Type of Control System : Micro Processor based Simplex Selective Collective control with / without attendant.22 Car fittings : LED lights & Regular (Square) cabin fan.23 Lift Well : Available |
| 3 | 24 Indication : UP / DOWN Digital direction and position indicator for all Landings and inside the car.25 Emergency provisions : Battery operated Alarm bell & Light to be Provided with Automatic charging device.26 Fire Man’s switch : In the Ground Floor27 Minor Builder works : included28 Scaffoldings : included29 Sill angles and Facio Plates : included30 Steel for Lift Machinery : included31 Servicing and maintenance : Free Comprehensive Maintenance for one Year Guarantee period.32 Automatic Rescue Device : Provision to facilitate the landing to the nearest floor at the time of power failure. The ARD consists of suitable Battery system with charger, Inverter, under voltage protection system etc. complete with all accessories. 33 Provision for Intercom : To be provided in the Ground Floor & Machine Room with Phone (Press & Speak).34 Lift License : Preparation of Drawings, payment of inspection charges to CEIG and insurance policy and Obtaining CEIG approval for the Lift as per Lift act should be done by the Lift contractor.35 Floor Position : Included with LED display and floor annunciator. |
| 4 | 36 Special Features:a. Infra red door sensor with full height screenb. S.S. hairline finish hand rail in carc. Vandal proof SS button with SS coverd. S.S. hairline finish door frames for landing doorse. V3F door operatorf. Call register signalg. Stainless steel facio plates for car operating panel and landing fixturesh. Steel ladder for Lift machine roomi. On / Off switch for fan and lightj. Over-load warning indicator with audio Announcerk. Voltage stabilizer for control circuit.37 Over Speed Governor, Phase failure and Phase reversal Relay, alarm bell, T guide brackets for car and counterweight, Rubber padding under the winding unit, Motor of adequate capacity, Electromagnetic brake with compression springs, Car safety gears, Buffers, Electro mechanical locks, Emergency key, side supporting angles, Motor over - load protection devices, Final limit switch main, suspension ropes, Counter weights, Lifting joist for mounting the Machineries. |
| 5 | 38. Guarantee : Guarantee at least for one year for the materials and workmanship of equipments should be offered by the Lift contractor.39. Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department.40. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. |
| 6 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End |
| 7 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 8 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb |
| 9 | Supply and fixing of 5A 3 Pin combined wall socket with 5A flush type switch in suitable module surface mounting Box (plastic) with module cover plate (plastic) on wall with connections. (Higher end) |
| 10 | Supply and fixing of 16A Two-way switch in suitable Modular flush type GI box on wall with suitable front cover plate with earth connection (Higher End) (For Lift well lighting Control) |
| 11 | Supply and fixing of 8 way single pole and neutral MCB DB with metal door cover with IP 42 protection with 1No. 32 Amps DP MCB as incoming and 2 Nos. 10A SP MCB and 2 Nos. 10A DP MCB outgoing on wall with earth connection only. The MCB DB and MCB's should be with ISI mark (and of Higher End make) (For 1 No Lift Room ) |
| 12 | Supply and run of 3 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14SWG TC wire with painting of suitable colour. |
| 13 | Supply and laying of 3-1/2 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 14 | Supply and clamping of 3-1/2 x 25 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps(Lift Supply) |
| 15 | Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection |
| 16 | Supply and providing cable end termination of 3-1/2 x 25sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 17 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour. |
| 18 | Renewal by Supply and fixing of 63A FP MCB in Metal box FP enclosure on wall with earth connection. (Higher End) |
| 19 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/ floor/ ground for earth connection. |
| 20 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 21 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender