Tender For Repair To Footpath, Drain, Fencing And Other Misc Work In Domestic Area At Af Stn Kalaikunda
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Footpath, Drain, Fencing And Other Misc Work In Domestic Area At Af Stn Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified and directed. . |
| 2 | M&L 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | M&L PGVT Vitrified tiles light shade 10 mm thick quare/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | All as per item No 03.00 above, but on vertical surfaces such as skirting incl including 8 to 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 5 | M&L 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc |
| 6 | Demolition of cement concrete of any description and in any position not otherwise specially provided for (unreinforced) complete all as specified and as directed. Note : All Debris obtained from demolition shall be removed from MOD land. |
| 7 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed. |
| 8 | M&L Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 9 | M&L preparation of surfaces for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 1548:2004 , Alkali and Fungal resistance, dirt resistance exterior paint of required shade with silicon additives@ 1.43/10Sqm over and including priming coat of exterior [email protected]/10Sqm over new plastered surfaces, complete all as specified and directed by eng-in -charge. Note : Application of Painting should be carried out through authorised applicator. |
| 10 | Dismantling post or struts (wood, steel or RCC) any section , including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 11 | Dismantling fencing of wire /mesh, any type |
| 12 | Excavation in hard/dense soil as in post holes each n.exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil complete all as specified and directed. |
| 13 | M&L PCC 1:4:8 Type D-2 using 40mm graded stone aggregates as in Cement concrete in foundations, filling and mass concrete |
| 14 | Supply of Rust Proof Virgin Grade PVC Coated chain link Fencing confirming to IS : 2721(2003), made of base GI wire dia of 4.00 mm with additional 1.00 mm pvc coating,Total dia 5.00 mm(+/- 10%).Mesh size 100 mm X 100 mm(+/- 5mm). The mesh wire shall be manufactured from Galvanised steel wire conforming to IS 280:2006 having zinc coating of type haevy,280 GSM min as laid down in IS 4826. PVC compound should have the Virgin grade properties,having Modulus of Elasticity 18.6 Mpa(min) as per IS 10810/part-7, Hardness of 50-60 shore - D as per IS 13360(Part-5) with Specific gravity of 1.3-1.35 Gm/cc. The Finished Virgin Grade PVC Coated chain link shall withs to minimum 1000 hrs of salt Spray Test conforming to IS3360. Tensile strength of wire shall be within 400 to 500 Mpa confirming to IS : 1608. Weight 2.4Kg(Min) per Square Meter, Shade of PVC wire will be RAL-6005(Green)/any type as per requirement of site and instructed by Engineer In charge. The wire shall be free from scale, irregularities, imperfections, flaws, sand splits and other defects. |
| 15 | Supply only chain link fencing, MS galvanised of mesh size opening 50mm X 50mm and dia of 4.00mm wire of make Tata Wiron /shiva Engineering Co, complete all as specified and directed. |
| 16 | Fixing only chain link fencing, MS galvanised of mesh size and dia of wire complete all as specified and directed. |
| 17 | S&F mild steel angle iron Fe 410 W Ged E 250 Quality A posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work complete all as specified and directed. |
| 18 | S&F 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 19 | S&F Mild steel Round bars 10mm dia and over confirming to Fe 410 W (Gde E-250, Quality A) or Fe 290 Gde 165, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link) |
| 20 | M&L preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed. |
| 21 | M&L preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | S&F in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 23 | Restraining and resecuring steel barbed wires of any description including making good staples etc |
| 24 | Demolition of reinforced cement concrete as in Concrete of any description and in any position not otherwise specifically provided for , complete all as specified and a directed |
| 25 | M&L RCC 1:2:4 Type B1 using 20mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 26 | M&L RCC 1:2:4 Type B1 using 20mm graded stone aggregates as in Columns, pillars, piers, posts and struts under-reamed piles and mass concrete complete all as specified and directed. |
| 27 | Use and Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, flat complete all as specified and directed. |
| 28 | Use and Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions ough finished surfaces of concrete, Square/rectangular complete all as specified and directed. |
| 29 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link) complete all as specified and directed. |
| 30 | All as per item No 29.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 31 | M&L Providing precast cement concrete louvres and jallies, 25mm thick type B0 1:2:4 ( 12.5mm graded aggregate) set in cement mortar (1:4) (measured solid), including all mouldings but excluding frame complete all as specified and directed. |
| 32 | Demolition of Brickwork masonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removes debries from campus of MD, complete all as specified and directed. |
| 33 | M&L brickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 34 | M&L brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description etc |
| 36 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410-W Gde E-250 Quality A |
| 37 | S&F Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 38 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land. |
| 39 | M&L 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub-floors, sub-bases, floors, pavings etc |
| 40 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 41 | M&L pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed. |
| 42 | M&L Machine pressed precast -concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and as directed. |
| 43 | M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 44 | M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on paver block ,chequred tile/concrete surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 45 | M&L PCC kerb stone outer coloured surface machine pressed factory made of size 300 mm long , 300mm wide, 150mm thick using M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throating incl necessary earth work and removal if required complete all as specified and directed. |
| 46 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 47 | Taking down eaves, gutter and rain water pipe any size or pattern including all fittings complete all as specified and as directed. |
| 48 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or floor, complete all as specified and directed. |
| 49 | M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in channel /drain complete all as specified and directed. |
| 50 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc |
| 51 | Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil complete all as specified and directed.. |
| 52 | Returning filllng in , including spreading , levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 53 | Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender