Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #57999749

Tender For Repairs To Reinforced Cement Concrete Roof, Plastering, Seepages Work And Other B/R Services Of Otm Bldgs Including Messes At Main C And Tech Area And Repairs To Roofs, Chajjas, Sunken Portions And Allied Buildings Components Including Tre

Issued by Statutory Bodies & Commissions/Committees · Chengalpattu, Tamil Nadu
Tender Value
35 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Reinforced Cement Concrete Roof, Plastering, Seepages Work And Other B/R Services Of Otm Bldgs Including Messes At Main C And Tech Area And Repairs To Roofs, Chajjas, Sunken Portions And Allied Buildings Components Including Treatment Of Leakage, Seepage, D Ness And Surface Deteriotion At Tech Area Afs Tambaram (8958/E8)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 02-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 09-Nov-2026
2 09-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 14-Nov-2026
3 14-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 17-Nov-2026

BOQ

Name of Work:- REPAIRS TO RCC ROOF, PLASTERING, SEEPAGES WORK AND OTHER B/R SERVICES OF OTM BLDGS INCLUDING MESSES AT MAIN C AND TECH AREA AND REPAIRS TO ROOFS, CHAJJAS, SUNKEN PORTIONS AND ALLIED BUILDINGS COMPONENTS INCLUDING TREATMENT OF LEAKAGE, SEEPAGE, D NESS AND SURFACE DETERIOTION AT TECH AREA AFS TAMBARAM (8958/E8)
Sl. No. Item Description
1Demolition of cement concrete unreinforced of any description of any position not otherwise specfically provided for or as in sunken floors complete all as specified and directed by Engineer-in-Charge.
2Taking down completely existing treatment along with plaster as in sunken slabs vertical faces complete all as specified and directed by Engineer-in-Charge.
3M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) & surface even & smooth using extra cement with IWPC (IWPC measured and paid seperately) as in sunken slabs complete all as specified and directed by Engineer-in-Charge.
4M&L for appylng Nitoproof 600 PF or equivalent approved product minimum 0.8mm dft over a priming coat on horizontal and vertical surfaces all as manufactured as in sunken slab surfaces complete all as specified and directed by Engineer-in-Charge.(NOTE : After the application of above treatment, contractor has to fill the sunken slab surface with water and check the dampness and seepage, In case there is a slightest indication of seepages noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC Nitobond SBR of equivalent approved product admixed with the integral WPC or cementitious crystalline water proofing compound in the affected area to seal all cracks and micro cracks if any and additional coat of Nitoproof 600 PF. This shall be done by contractor at his own cost only and rate is deemed to be inclued in the rate quoted by the contractor.
5M&L for 15mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement with IWPC (IWPC measured and paid separately) as in sunken slab complete all as specified and directed by Engineer-in-Charge.
6S&F of low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm fixed to walls, floors etc of 32mm bore as in spouts for sunken slabs complete all as specified and directed by Engineer-in-Charge.
7M&L cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings complete all as specified and directed by Engineer-in-Charge.
8Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.
9Dismantling floor hearth or wall tiling incl cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and directed by Engineer-in-Charge.
10M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., laid over and including cement screed bed or bedding layer in CM (1:6), 15mm thick and tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed by Engineer-in-Charge.
11M & L glazed ceramic coloured tiles of size 300x450x7 mm / 350x 250x 7mm / 450X 350X 7mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge.
12M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base complete all as specified and directed by Engineer-in-Charge.
13Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each ccomplete all as specified and directed by Engineer-in-Charge.
14S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
15S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge.
16S & F for 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer-in-Charge.
17S & F for 125 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
18S & F for 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
19S & F for 300mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engineer-in-Charge.
20S&F Self Adhesive water proofing flash bond membrane 100mm wide fixed to joints of AC / Ridge portion / over surfaces of galvalume roof sheets / concrete surfaces etc at and up to 30m height incl necessary scaffolding and removal of the same after completion of the job complete all as specified and directed by Engineer-in-Charge. Make :Bostiq India or equivalent
21M&L for providing cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) as in padding and benching & filletting with IWPC (IWPC measured and paid seperately)complete all as specified and directed by Engineer-in-Charge.
22M&L screed bed or bedding layer 10 mm thick CM 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC (IWPC measured separately) as in roof slabs complete all as specified and directed by Engineer-in-Charge.
23M&L for PolyUrethane waterproofing membrane treatment comprising the followings :-(i) Removal of all loose gravel, dirt, oil, grease and foreign matter or existing membrane by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. All Substrates should be clean, sound and free of laitance. (ii) Crack repair by cutting “V” groove and fill with PMC mortar prepared in the ratio of ShaliCrete: Cement : Sand (1 : 2 : 5).(iii) Bonding Agent coat with Mix 2-parts cement to 1-part ShaliSBR Latex by weight of cement and apply a bonding coat with consumption of mixture 0.3 - 0.5 kg / m2 and allow to cure the bonding agent minimum 3 to 5 hrs.(iv) Priming the surface with ShaliUrethane® BTD dilute with water @ 1:1 ratio and use as primer @ 400 gm /m² and allow the primer coat to touch dry condition.(v) Appllying 1st coat of ShaliUrethane® BTD @ 1.0 kg / m² by brush / roller while the primed surface is tacky and allow 1st coat to dry for 4-8 hrs.(vi) Spreading of non-woven geo-textile or Fiber Glass Tissue / scrimp of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky.(vii) Appllying 2nd coat of ShaliUrethane® BTD @ 1.0 kg / m² by brush / roller for final DFT of 1000 micron in two coats. Ensure final curing time of 36 hours before allowing / carrying out any further work. Conduct ponding test after 14 days of curing at ambient temperature complete all as specified and directed by Engineer-in-Charge.
24Taking down cracked loose plastering of highly deteriorated portion of RCC beams, pillars, chajjas, slab and lintels including cleaning the reinforcement bars of any size by scapping and removing rust by using rust remover and applying epoxy based anti corrosive coating of Zinc Rich primer and applying bonding agent of Boscocem 475 SBR latex on the surface of old concrete as per manufacturers recommendation, recasting RCC members with cement concrete type A0 1:1.5:3 using 12.5 mm graded stone aggregate mixed with acrylic latex based additive of Hydroment 476 @ 10 ltrs per 50 kg of cement including finishing matching with existing finishes all rendering 10 mm thick over concrete surfaces in cement mortar 1:3 including application of three coats of white wash/ Oil Bound Distemper/ Colour wash after preparation of surface or the proportion recommended by the manufacturers including all necessary formwork all as directed at site. Note : Replacement of reinforcement where necessary before recasting RCC reinforcement shall be measured and paid seperately. However the cost factor towards sacffolding etc for carrying out these items of work at various heights upto 12 Mtr shall deemed to be included in this item. Approved agency - Bostik, STP, SIKKA complete all as specified and directed by Engineer-in-Charge.
25M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.
26-Ditto- but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and directed by Engineer-in-Charge.
27Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge.
28Taking down of steel tubing and connections complete on walls floors etc for 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge.
29Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge.
30Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge.
31S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
32S & F in repairs 15 mm dia Pillar taps long body fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
33S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engineer-in-Charge.
34S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and flush pipe of polyethylene of low or high density or 32mm dia PVC pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.
35S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe complete with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and connection to drain (or outgoing pipe) complete all as specified and directed by Engineer-in-Charge.
36S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge.
37S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge.
38S&F PVC (SWR) bends any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge.
39S&F PVC (SWR) bends any radious 75 mm dia complete all as specified and directed by Engineer-in-Charge.
40S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs complete all as specified and directed by Engineer-in-Charge.
41S&F PVC (SWR) bends with access door any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge.
42S&F PVC (SWR) bends any radious 75 mm dia with access door complete all as specified and directed by Engineer-in-Charge.
43Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge.
44Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge.
45Dismantiling of AC sheets / Galvolume sheet / GI sheet Corrugated or Semi corrugated etc in roof coverings complete all as specified and directed by Engineer-in-Charge.
46S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engr-In-Charge.
47S&F for 2mm thick fibre glass reinforced transulent corrugated sheeting with two corrugate side lap fixed with 'L' or 'J' type hook fixed in roof ,wall etc complete all as specified and directed by Engineer-in-Charge.
48S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.Note: Rate quoted deemed to include cost of making good disturbed masonry surface to match with existing etc using PCC 1:2:4/brick work/cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
49S & F for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
50M&L for repair to dampness treatment of walls including taking down/hacking loose/blistered plaster and paint from damp-affected areas, thoroughly cleaning the surface, raking out cracks where required, applying approved polymer/cementitious waterproofing slurry in two coats, carrying out crack repairs with polymer-modified mortar, re-plastering with 15–20 mm thick cement mortar (1:4) mixed with integral waterproofing compound conforming to IS 2645, curing adequately and finishing the surface with wall putty and two coats of acrylic emulsion paint to match the existing finish, including all scaffolding, tools, disposal of debris complete all as specified and directed by Engineer-in-Charge.Note:- The treatment should follow the principles of IS-3067 for damp-proofing and waterproofing of buildings.
51Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth, upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge.
52Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.
53S & F for semi perfortaed 12mm thick micro tegular edges GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed by Engineer-in-Charge.
54Taking down cement plaster any description on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
55M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
56M & L for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately)complete all as specified and directed by Engineer-in-Charge.
57M&L for Rendering 5mm thick in CM 1:3 as in ceilings concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
58M&L for preparation of new plastered surfaces of walls three coats of white wash complete all as specified and directed by Engineer-in-Charge.
59M&L for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over a coat of chalk whiting primer paint on plastered surrface complete all as specified and directed by Engineer-in-Charge.
60M&L for preparation of new plastered surfaces of walls three coats of Colour wash complete all as specified and directed by Engineer-in-Charge.
61M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint paint on wall surfaces complete all as specified and directed by Engineer-in-Charge.
62M&L for Praparation of Newly plastered surfaces and applying Three coats of White wash on Ceiling complete all as specified and directed by Engineer-in-Charge.
63Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed by Engineer-in-Charge.
64M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
65M & L half Brick wall with sub-class 'B' bricks old size straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
66M&L for removing existing water proofing treatment any type like plastering, PCC, Roof tiles, APP membrane etc., including removal of debris, old APP membrane etc., outside MOD land and applying water proofing treatment on horizantal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm including minimum 10cm side lap and 15cm end lap fused uniformly by LPG torch flame sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.10 Kg/Sqm over plastered RCC roof slab/parapet after cleaning the surfaces by removing dust, dirt etc., complete all as per manufacturers instruction and as directedNote :-1) Rate included taking down and refixing of earth strips or any other in the same position2) WPC, padding concrete & Plastering shall be measured and paid separately.
67S&F in repairs 15 mm dia Bib tap standard PTMT long body any colour screwed for iron pipe (Min weight 120 gms) complete all as specified and directed by Engineer-in-Charge.
68S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed by Engineer-in-Charge.
69S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57999749
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 17-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Reinforced Cement Concrete Roof, Plastering, Seepages Work And Other B/R Services Of Otm Bldgs Including Messes At Main C And Tech Area And Repairs To Roofs, Chajjas, Sunken Portions And Allied Buildings Components Including Treatment Of Leakage, Seepage, D Ness And Surface Deteriotion At Tech Area Afs Tambaram (8958/E8)
Basic Detail
Tender No GE(AF)/TBM/8958/E8
Bidding Type Tender
Location
City Chengalpattu
State Tamil Nadu
Key Dates
Publish Date 14 Nov 2026
Submission Date 17 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
BOQ_889752.xls
f539eddf-4667-4635-a0ad-b5eec5bdcdbf.html
PS.pdf
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 09, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 14, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 17, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Today
Nov 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_889752.xls

html

f539eddf-4667-4635-a0ad-b5eec5bdcdbf.html

pdf

PS.pdf

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender