Tender For Provn Of Solid Waste Management Plant In Kanchrapara Military Station
Tender Value
2.81 Crore
Estimated cost
Bid Submission
16 Nov 2026
27 days left
EMD
3.57 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Solid Waste Management Plant In Kanchrapara Military Station
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part I (Building Works) (Lump Sum)Prepriced Amount B/F from Sl Page No 24 |
| 2 | Schedule 'A' Part II (EXCAVATION AND EARTH WORK)Prepriced Amount B/F from Sl Page No 26 |
| 3 | Schedule 'A' Part III (CONCRETE, BRICK WORK, STEEL, PLASTERING AND POINTING, FLOOR FINISHES AND PAVINGS)Prepriced Amount B/F from Sl Page No 30 |
| 4 | Schedule 'A' Part IV (WOODWORK)Prepriced Amount B/F from Sl Page No 31 |
| 5 | Schedule 'A' Part V (PAINTING)Prepriced Amount B/F from Sl Page No 32 |
| 6 | Schedule 'A' Part VI (WATER SUPPLY, PLUMBING, DRAINS AND SANITARY APPLIANCES)Prepriced Amount B/F from Sl Page No 34 |
| 7 | Schedule 'A' Part VII (INTERNAL ELECTRIFICATION & EXTERNAL ELECTRIFICATION)Prepriced Amount B/F from Sl Page No 41 |
| 8 | Schedule 'A' Part VIII (ROAD/HARD STANDING)Prepriced Amount B/F from Sl Page No 43 |
| 9 | Schedule 'A' Part IX (MISCELLANEOUS WORKS )Note: This schedule is not prepriced by MES. |
| 10 | Supply and fix Gl bracket of 40 mm dia pipe \\"medium grade\\" of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of Gl pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate MS flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing any place of poles with nuts, bolts & washers including grouting on wall etc complete all as specified and directed. |
| 11 | Supply, Installation, testing and commissioning of organic waste composting machine (Capacity 1000 Kgs per day) suitable for processing biodegradable waste such as food waste, vegetable waste, canteen waste and garden waste including civil work (for foundation) and electric connection (from panel) and water connection complete all as specified and as directed. |
| 12 | Supply, Installation, testing and commissioning of Bailer machine (5 HP Capacity) suitable for solid waste including civil work (for foundation) and electric connection(from panel) complete all as specified and directed. |
| 13 | Supply, Installation, testing and commissioning of Kill waste machine/Waste disposal Machine (Capacity 25 Kgs per hour and material non corrosive mild carbon steel of IS 2062,grade 'b' category, cylindrical chamber as specified by BIS) suitable for solid and flexible waste material including civil works (for foundation) connection (from panel) complete all as specified and directed. |
| 14 | Supply only non circular, virgin, synthetic, monofilament polyster fibres of length 12-18mm, specific gravity 1.34-1.39, UV stable, alkali resistant, equivalent dia 30-35 micron, melting point 240°C-260°C and minimum tensile strength 300 Mpa be used up to 0.20% by weight of cement or as per manufacturer's instruction/design mix in PQC as secondary reinforcment. Note:All properties/specifications shall meet test parameters as per IS 16481-2016 |
| 15 | Supply only high performance water reducing super plasticising admixture (Fosroc Conplast SP 500 or equivalent approved by GE) for producing pumpable concretre of high grade strength, low permeablility, high early strengh, improve workability, dense and close textured concrete with reduced porosity and high cohesion for reducing risk of segregation and bleeding complete all as specified and directed |
| 16 | Boring holes horizontally under road without damaging the surface of road (minimum 1 Mtr below the road surface) with the help of 80mm dia GI tube \\"medium grade\\" for passing of UG cable all as specified and directed. |
| 17 | Supply, Install, testing & commissioning factory made outdoor type dust and vermin proof LT panel board cubical double door hinged type compartmentalized of suitable size 415 volts AC 50 Hz fabicated of CRCA sheet 3.15 mm thick maching pressed and angle iron frame 40mm x40mm x6mm, grounted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregated) powder coated inside and outside complete including 4 pole aluminium busbar of capacity 200 Amps mounted on procelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs with openable shutters on both side and compresing of the following :-(a) MCCB 100 Amps cap with adjustable thermal release 4 pole of 25 KA rapturing capacity -01 No(b) MCCB FP, 63 Amps 16 KA outgoing-02 Nos(c) MCB TPN 40 Amp 10 KA outgoing-02 No(d) Digital volt meter D-500 volt with selectro switch digital amp meter of capacity 0-100 Amp alongwith selectro switch 3xLED type indicator (RYB) 3x100/5 tape wound CTs 3xSP MCBs of 6 Amp for protection indicator -01 No |
| 18 | Supply, erect, install solar LED light fittings with extruded aluminium housing corrosion proof, solar panel (Mono crystalline solar PV module) 60 W LED power 24 W lumen/Watt 125, solar charge controller MPPT. battery capacity maintenance free lithium /Ferro phosphate battery 12.8V-36 Ah BIS approved cells, inbuilt BMS for battery safety & enhanced battery life operating temperature -20 degree to 55 degree, designed for 2000 life cycle > 5yrs life faster charging maintenance free backup for 2 days, PIR motion sensor for automatic brightening & dimming, lumen (LM) 3120lm, LED life time 50000hrs, viewing angle - 120 charging time 1 day autonomy 2 days, CCT(K) 10+55C, dimension (mm) -5700K, mounting height 5-6m, working temp -10+550 1230 382*55, Net weight 18.5 Kg, including earthwork, PCC foundation as per site requirement with all accessories, cables complete all as specified and directed. |
| 19 | S&F 150 mm dia DWCPE (SN8) pipes, laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and directed. |
| 20 | S&F polythene (LLDPE septic tank) capacity 5000 Ltr of roto moulding grade confirming to IS 10146: 2003 and reliance 'O' 35042 grade MFI 2.0 to 6.0 gm/10 Minutes and density 932 to 943 kg/m3 and carbon black master batch content 40% + 1% and ash content 1%max, the avarage weight of tank 200+3.0 Kg and wall thickness 7.2 mm. Note :- (i) The tank shall be installed as per manufacturer instructions(ii) Excavation in any type of soil, PCC (1:2:4) below foundation, vent shaft, connection etc. complete all as required as per manufacturer instructions will be included in cost of Lump sum quoted against this item and nothing extra shall be payble on this account and tenderes are to quote their rates accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender