Tender For special Repair Of Bldg No P-120 & P-115 (Otm Accn, Att Line & Mi Room) Under Ge Dehradun..
Tender Value
38.66 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
77320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-120 & P-115 (Otm Accn, Att Line & Mi Room) Under Ge Dehradun..
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&L for Brickwork with subclass ‘B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete including demolition all as specified |
| 3 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 4 | M&L for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid |
| 5 | M &L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified |
| 6 | M&L for 10 mm thick rendering in cement mortar 1:3 on on fair faces of concrete surfaces finished even and smooth as in ceiling cement complete all as specifeid |
| 7 | M&L for preparation of wall and applying interior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. |
| 8 | M&L for preparation of wall and applying exterior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge |
| 9 | M&L for Preparation of new surface of wall and applying two coat of oil bound distemper includind and over Priming plastered andother surfaces with alkali resistant priming paint complete all as specified and directed. |
| 10 | M&L for Preparation with complete removal of existing treatment of old surface of wall and applying two coat of oil bound distemper including and over Priming plastered andother surfaces with alkali resistant priming paint complete all as specified and directed. |
| 11 | Material & Labour for preperation of new plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 12 | Material & Labour for preperation with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 13 | Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed . |
| 14 | ditto but exc,1.5 sqm & not exc. 4 sqm |
| 15 | M&L for Pressed steel frames size 105x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed |
| 16 | M&L for Pressed steel frames size 165x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed |
| 17 | Supply and fix flush shutters 30 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed. |
| 18 | S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 19 | S&F in repair stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed. |
| 20 | M&L for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed . |
| 21 | S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 70 mm x 40 mm mm made from wood plastic composite (single etruded process) material with density 750 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and diercted by Engr-in-charge |
| 22 | S&F 30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 650 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity |
| 23 | S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed . |
| 24 | S&F 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed |
| 25 | S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed. |
| 26 | S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified |
| 27 | S&F Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed. |
| 28 | M&L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified. |
| 29 | S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 30 | S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 31 | M&L for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate INCLUDIND DEMOLITION complete all as specified and directed |
| 32 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet,including connection to trap and to flushing pipe,anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 33 | S&F in repair vitreous China urinals,half stall type white(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) |
| 34 | S&F in repair vitreous chinaware wash down water closet pan padestal pattern white with seat cover excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Jet spray etc complete all as specified and directed |
| 35 | S&F AS IN REPAIR 10 ltr capacity PVC low level flushing cistern 'white' with inlet ,float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. Hindware/Parryware/Jaquar. |
| 36 | S&F in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed |
| 37 | M&L in repair looking mirror size 600x450x5mm selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer incl aluminium frame complete all as specified |
| 38 | S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified |
| 39 | S&F in repair chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified |
| 40 | S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed |
| 41 | S&F in repair vitreous china counter type wash hand basin, white flat back, excluding taps, waste pipe chain and plug and porcelain but including brackets all as specified |
| 42 | S&F as in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 43 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed. |
| 44 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for20 mm bore GI tubing and removing from site ,complete all as specified and directed. |
| 45 | S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing. |
| 46 | S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing. |
| 47 | S&F in repair 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified |
| 48 | M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified. |
| 49 | S & F 75 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 50 | S & F 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 51 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 52 | M & L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work ANDDEMOLITION complete. |
| 53 | M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition of existing complete all as specified and as directed. |
| 54 | S&F in repair 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified. |
| 55 | S&F in repairs CP brass Soap dish 6 inches size, complete all as specified and directed. |
| 56 | S&F in repair glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed. |
| 57 | S&F factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification. |
| 58 | M&L for Vitrified Ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing flooring complete all as specified |
| 59 | M&L for Vitrified Ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing flooring complete all as specified |
| 60 | M&L for Machine cut kota stone slab flooring 20-25mm thick IN RISER OF STEP. SKIRTIMG, dado over 15 mm thick cement mortar 1:6 RENDEING laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing incl demolition complete all as specified and as directed. |
| 61 | M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 62 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including dismantling existing tiles with baking complete all as directed. |
| 63 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified. Please Enable Macros to View BoQ information |
| 64 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender