Tender For Maintenance Of Stp And Connected Items At Af Stn Utarlai
Tender Value
8 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
5 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Stp And Connected Items At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Supply only Sodium Hypo chlorite solution (liquid chlorine) having 10% chlorine content in sealed HDPE container confirmed to IS code all as directed by Engr-in-charge |
| 2 | Supply only Poly Electrolyte (PE) in sealed bag confirmed to IS code all as directed by Engr-in-charge |
| 3 | Supply only Poly Aluminium Chlorite (PAC) 10% content in sealed HDPE container confirmed to IS code all as directed by Engr-in-charge |
| 4 | Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:- (A) Incomimg:(i) MCCB 200 Amps,icu-35 Ka,4 pole,415 v-01 Nos(ii) phase indication lamps LEd type RYB including holder with 0.5 A MCB -01 set of three (iii) Voltmeter digital square type 0.500 V with selecter switch.01nos (iv)Ampere meter digital square type 0.250 amps with selecter switch inclu set of diacast Cts of suitable ratio complete-01nos (B) Bus bar Electrolytic high conductivity aluminium busbar of appropriate cross sectional area -04nos (RYB phases-03nos and Black -01 for neutral). (C) Outgoing: (I) 20 HP star deltta starter-02 Nos :(I)10 HP DOL starter - 04 Nos (ii) 5 HP DOL starter-04 Nos complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing. |
| 5 | S&F in repairs rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 6 | M&L for complete removal of existing paint of Elect motor with pump including base frame and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 7 | Supply and fix in replacement of pressure gauge air water meter of pressure range 0-10 kg/Sqcm complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L for laying as in replacement of MS pipe 80mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge |
| 9 | M&L for laying as in replacement of MS pipe 100mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge |
| 10 | M&L for laying as in replacement of MS pipe 150mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge |
| 11 | M&L for laying as in replacement of MS pipe 200mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 12 | M&L for laying as in replacement of MS pipe 200mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender