Tender For Provision Of Storage Area For Guards At Patiala Under Ge (S) Patiala
Tender Value
35.99 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
14 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Storage Area For Guards At Patiala Under Ge (S) Patiala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Oct-2026 | Corrigendum No 1 | Date | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Total amount of Sch 'A' Section-I (Building Works) lump sum price worked out by the contractor for \\"Building Works\\" as listed in Schedule 'A' Part-I |
| 2 | Total amount of Sch 'A' Section-II (Path / Hardstanding) lump sum price worked out by the contractor for \\"Path / Hardstanding\\" as listed in Schedule 'A' Part-II. |
| 3 | Schedule 'A' Section - III ( Lightning Protection work) Note : This schedule is not pre priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col 7 signifies this fact only |
| 4 | Supply and fixing single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified and as directed by Engineer-in-charge. |
| 5 | Supply and fixing aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip complete all as specified and as directed by Engineer-in-charge. |
| 6 | Material and labour for Earthing complete with galvanized earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground to the depth of not less than 2.25 mtr below ground level with top edge of earth plate or a depth not less than 1.50 m below ground level connected to GI strip 32 x 6mm as earth lead by means of galvanized bolts, nuts check nuts and washers and necessary excavation and earth work PCC 1:2:4 type B-1 using 20mm graded brick aggregate for earth pit RCC cover , charcoal & common salt filled in alternate layers funnel with 20mm bore light grade watering pipe, 40mm dia GI pipe light grade for protection of GI strip, wire mesh and connected to earth point including testing on all as specified and shown in electric plate No 3 of SSR part I.( for Highmast) complete all specified and as directed by Engineer-in-charge. |
| 7 | Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex, head screw complete all as specified and as directed by Engineer-in-charge. |
| 8 | Supply and laying steel tubing 40 mm mm bore dia,medium grade, galvanized with all fittings laid in trenches complete all as specified and as directed by Engineer-in-charge. |
| 9 | Supply and fixing galvanized iron strip 32mm x 6mm buried in ground/wall complete with saddles and fixing screws for fitting the strip complete all as specified and as directed by Engineer-in-charge.. |
| 10 | Material and labour for fire fighting stand of standard size made of MS angle iron, Channel, sheets and painted with two coat of synthetic enamel paint red colour over a coat of red oxide primer and writing \\"FIRE POINTS-KEEP ACCESS CLEAR\\" with white enamel paint as per standard size of word with necessary PCC and brick work platform including fabrication works etc complete all as specified and as directed by Engineer-in-charge and providing and fixing of following items.(i) Galvanised MS fire bucket 14 Itrs capacity -04 Nos(ii) Fire beater -02 Nos(iii) Fire hook - 02 Nos(iv) Shovel - 02 Nos(v)Hand siren -02 Nos(v) ISI marked (IS:15683) dry chemical fire extinguisher, powder (ABC) type capacity 6 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets - 2 Nos(vi) ISI marked (IS: 15683) Mechanical foam extinguisher 9 Ltrs capacity – 2 Nos(vii) ISI marked (IS: 15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender