Tender For Provn Of Works Services For Trg And Motivational Hall And Certain Minor Works Under Age B/R-I At Af Station Tambaram (8956/E8)
Tender Value
42.98 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
85960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Works Services For Trg And Motivational Hall And Certain Minor Works Under Age B/R-I At Af Station Tambaram (8956/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | Corrigendum | Technical Bid | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not execeeding 50 M and making good surface complete all as specified and directed. |
| 2 | M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling & mass concrete for post/pillars etc complete all as specified and directed. |
| 3 | S & F for mild steel work angles, bars, flats etc. as in fencing post struts including cutting tops to shape as directed including embedding in concrete and all necessary drilling holes, bolting or riveting , welding notching for wire and similar work confirming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 4 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 5 | Supply only MS galvanised chain link fencing haevy zinc coated (Hot dip), aparture size 50mm and wire of 8 Swg (4 mm) complete all as specified and directed by Engineer-In-Charge. |
| 6 | Fixing only chain link fencing any mesh size and type to any type of standard, rails, iron angle posts, straining bolts etc incl provision of binding wire complete all as specified and directed by Engineer-In-Charge. |
| 7 | S & F mild steel screw bolts of 11 to 15mm diameter of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and not exc 10cm complete |
| 8 | M&L for MS round bars, 10mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire all as specified. |
| 9 | M & L for preparation of new or previously untreated steel surfaces of any description, not exc. 10 cm width or girth, not otherwise described when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 10 | Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc,or for shaft, wall, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil. |
| 11 | M & L for Plain Cement Concrete (1:4:8) Type D2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. |
| 12 | M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified and as directed. |
| 13 | M&L for rendering 15mm thick on brick work or concrete surface of walls in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint paint on wall surfaces as specified and directed by Engr-In-Charge. |
| 15 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as in weep hole complete all as specified and directed. |
| 16 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils. |
| 17 | Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point. |
| 18 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) as in coping/ bed block/base to fencing including necessary form work complete all as specified and directed. |
| 19 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor other side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge. |
| 20 | Providing and fixing decorative first class teak wood door with teak wood chowkhat (frame) of approved section Min 125x75mm and area Exc 2.0 Sqm but not Exc 3.0Sqm, decorative carved/designer teak wood shutter 35-40 mm thick, fabricated from selected seasoned teak wood with moulded stiles, rails and decorative panels, including all mortice and tenon joints, holdfasts, approved quality designer brass/stainless steel fittings, butt hinges, mortice lock, handles, tower bolts, screws and all other accessories, complete all as specified and directed by the Engineer-in-Charge.Note:- The door shall be finished with fine sanding and three coats of melamine polish/French polish to expose the natural grain of the teak wood, |
| 21 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite bedded and pointed including 20mm thick screed cement mortar (1:4) complete all as specified and directed. |
| 22 | M&L for granite edge moulding to 18-20 mm thick stone of counter vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and as directed. |
| 23 | S & F Mild steel work framed work as in ornamental and intricate design framed and hung gates, including pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde - E - 165 |
| 24 | S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour / wood grain printed PVC sheet inclusive of solvent cement and fixing at site on 18mm minimum thick PVC/WPC frame as per specifications and drawing including dismantling existing boards of any description any pattern including fillets, frame etc complete all as specified and directed. |
| 25 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 26 | Taking down cement or cement limes plaster on brick or stonewalls including racking out joints, hacking for key, scrubbing down with water etc. |
| 27 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement |
| 28 | M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed. |
| 29 | M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed. |
| 30 | M&L for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth , upto entire satisfaction of Engineer-in-charge, Preparation of surfaces and applying one coats of exterior emulsion weather coat paint (weather coat APEX, 100% Exterior grade) (light shade) with highlighter of any approved shade @ 5 sq.m/litre/2 coats by using roller to external wall/ RCC surfaces/soffits of chajjas/ Roof projections/ cantilevers/ balcony etc surface over & including a coat of interior wall primer @ 11 sqm/litre/1 coat as recommended as under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 31 | Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying two coats of texture paint (rustic or traditional type of superior grade) over a coat of primer/binder/pigments/fillers, as per tint/colour, or adopting a different method of appliance as per manufacturer's instructions/technical specifications complete all as specified and directed by the Engr-In-Charge. |
| 32 | Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 33 | M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 34 | M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed. |
| 35 | M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed. |
| 36 | Dismantling single layer Mangalore pattern roofing tiles or similar tiles in roofing complete all as specified and directed by Engr-in-Charge. |
| 37 | Dismantling battens for tiles, shingles etc of any size including tilting fillets spacing not exc 15 cm centre to centre complete all as specified and directed by Engr-in-Charge. |
| 38 | M & L 2nd class hard wood Clean sawn battens spaced at 15 cm centres size exc 15 Sqcm and not exc. 25 sqcm complete all as specified and directed by Engr-in-charge. |
| 39 | M & L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed by Engr-in-Charge. |
| 40 | M & L Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 41 | Dismantling timber scantlings 40 sq. cm and over in section for frame work, in any position and all as specified. |
| 42 | M & L for Second class hard-wood in scantlings timber framed and fixed with clean sawn and all as specified. |
| 43 | M&L for Preparation old Mangalore pattern clay roofing tile by scraping, wire brushing and cleaning the surface free from dust, dirt, moss, algae and all loose materials and applying two coats of approved quality weather-resistant terracotta roof paint of approved shade over a coat of approved exterior acrylic primer, including all materials, labour, scaffolding, tools and plant, complete all as specified and directed by the Engineer-in-Charge. |
| 44 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified. |
| 45 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 46 | M & L for 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for 75 mm thick plain cement concrete (1:2:4) type B1 (20mm graded stone aggregate) finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 48 | Supply and fixing of Mild steel Plain black sheets of thickness 3-4mm, including fixing on the wall with minimum 6mm dia bolt/rivet for fire point/stand all as specified and directed by the Engineer-In-Charge.Note : The rivet/bolt shall be measured and paid separately. |
| 49 | S&F for mild steel screw rivets/bolts diameter of shank 5 to 10 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 5 cm long complete all as specified and directed. |
| 50 | M&L for fixing clamps with rivets/ bolts/ welding on mild steel plate not exceeding 6mm thick and fixing with the wall as directed by the Engineer In Charge. |
| 51 | S&F for structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed |
| 52 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall bend to shape, fixed with self tapping screws as specified |
| 53 | M&L for preparation of old decorated steel surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 54 | M&L for reinforced cement concrete 1:1.5:3 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 55 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 56 | S&F for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 57 | S&F for TMT steel bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 58 | M&L for preparation of new surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed |
| 59 | M&L for 40 mm thick plain cement concrete (1:2:4) type B1 (20mm graded stone aggregate) finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 60 | M&L for sand filling under paver blocks including watering and consolidation all as specified and as directed |
| 61 | M&L for 60mm thick machine pressed precast cement concrete tiles of interlocking pattern paver blocks with grey cement and pigment rubber moulded with vibration technology set and jointed as per manufactures instructions laying over sand cushioning complete all as specified and as directed by Engr-in-charge. |
| 62 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed |
| 63 | S&F for MS Wind ties, Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;and similar work confirming to Fe 290 Grade E-165 |
| 64 | M&L for mild steel framed work as hung gates, including pintle hinges, stops, hand-made sliding bolts, etc. as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay, double shutter (wire gauge and glazed shutter) complete with glazing bars,dovetailed or welded, inclduing taking down window all as specified. Please Enable Macros to View BoQ information |
| 66 | M&L for steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay, double shutter (wire gauge and glazed shutter) complete with glazing bars,dovetailed or welded, inclduing taking down window all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender