Tender For Construction of Bathroom Near Head Of Ab Rashid Lone And Others At Chuntimulla , Halqa: Chuntimulla Block:- Arin Distt. :- Bandipora Scheme :- Ut Capex (Tsp)
Tender Value
1 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
1 days left
EMD
2000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Bathroom Near Head Of Ab Rashid Lone And Others At Chuntimulla , Halqa: Chuntimulla Block:- Arin Distt. :- Bandipora Scheme :- Ut Capex (Tsp)
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for foundation in trenches including dressing of sides, ramming of bottom and disposal of excavated soil upto an average lead of 50m & lift upto 1.5m |
| 2 | Providing and laying dry stone soiling hand packedi/c carriage of material for an average lead of 10kms |
| 3 | Providing and laying in position cement concrete in 1:3:6 mix with 20% plum using 40mm N/S Nallah aggregate excluding cost of centering and shuttering. All works upto plinth level. |
| 4 | Centerng and shuttering including strutting, propping etc and removal of form work for, A) Foundations, footings, bases of columns |
| 5 | B) Suspended floors, roofs, landing, balconies etc. |
| 6 | Brick work with common burnt clay F.P.S (non-modular) bricks in superstructure upto level V in (1:6) cement mortar including extra cost for above plinth. |
| 7 | P/L in position specific grade of reinforced cement concrete. Execluding cost of centering and shuttering (1:2:4) mix using 20mm N/s Agg |
| 8 | Reinforcement for R.C.C work I/C cutting, bending, binding and placing in position. (Qty vide item no 07=1.33 cum @1.0 qtls/cum) |
| 9 | 12mm Cement plaster of mix 1:6 (1 cement : 6 fine sand) mix |
| 10 | P/L cement concrete (1:4:8) mix using 20mm n/s agg |
| 11 | Providing and fxing angle iron shutters doors panelled with PGI sheet or CGI sheet and ventilators with welded mesh wire as per directions of the Engineer incharge. A) Doors shutters with frame angle iron 40x40x5mm |
| 12 | B) Ventilators |
| 13 | Finishing walls with ehite cement based putty two or more coats to give smooth finish over plastered surface |
| 14 | Carriage of materials: A) Sand and Aggregates by MT for an avg lead of 25 kms. |
| 15 | B) Bricks for an avg lead of 80km. |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 10mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern including flush pipe (of approved make) with manually controlled device (handle level) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the walls and floors whereever required. White vitreous china orissa pattern W.C pan size 580x440mm with integral type foot rests |
| 17 | P/F water storage tank 500 ltrs with necessary fittings and fixtures including water tank nipple, washers etc complete job |
| 18 | Copolymer pipes confirming to IS:15801, UV stabilized and anti microbal fusion welded having thermal stability for hot and cold water including alll PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge. Internal work exposed on wall with clamps at 1.00 meter spacing. A) PN-16 pipe, 20mm OD (SDR-7.4) |
| 19 | B) PN-16 Pipe, 16mm OD(SDR-7.4) |
| 20 | P/F of PVC pipe (B-type) with necessary fitting and fixtures complete job. A) 110mm |
| 21 | B) 75mm |
| 22 | P/F of stainless steel bib cock with 15mm nominal bore dia |
| 23 | P/F of stainless steel angle valve with 15mm nominal bore dia |
| 24 | Add for PVC manhole cover 1'6\\"x1'6\\" including fixing in slab ect complete job. |
| 25 | Add provision for Electrification including wiring switch boards etc complete job |
| 26 | Add provision for Signboard & Photographs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender