Tender For Electrical Works For Supply, Installation, Testing And Commissioning Of 1250 Lpm Capacity Psa Based Oxygen Generation Plant & 750 Lpm Oxygen Generating Module With Allied Jobs At Skims Mch Bemina
Tender Value
61.99 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
6 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Works For Supply, Installation, Testing And Commissioning Of 1250 Lpm Capacity Psa Based Oxygen Generation Plant & 750 Lpm Oxygen Generating Module With Allied Jobs At Skims Mch Bemina
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of 1 MVA ,11/0.433 kV Distribution Transformer, with automatic On Load Tap Changer on 11 kV side (min 35% & max 5%) with a provision of 3 phase backup supply with Bimetallic Terminal Connectors Energy Level-2, Copper wound, oil – immersed (including first fill), ONAN, and with LV Cable Box having detachable Aluminium Gland plate. The Transformer should have arrangement for vertical take-off of cable. The Transformer must include:(i) Buchholz relay(ii) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos.(iii) Bird guard(iv) Oil temperature indicator and Winding temperature indicator with suitable tripping mechanism above permissible limits(v) Additional Neutral separately brought out on bushing for earthing.(vi) Non return valve (for conducting pressure test)(vii) Pressure relief device or explosion vent(viii) Monogram Plate(ix) Inspection cover(x) Detachable type radiators with top and bottom shutoff valve.(xi) Oil Conservator with Oil level indicator(xii) Minimum level marking and drain plug(xiii) Necessary hardware, clamps, lugs etc. for termination on HV/MV etc. |
| 2 | Fabrication, supply, installation testing & commissioning of compartmentalized, outdoor-type, Electrical Panel of cubical construction, having 6 Nos. Angle-iron legs of suitable dimensions, to be sufficiently grouted (> 750mm depth), in 1:2:4 concrete mix, onto outdoor land / concrete as per site requirement, fabricated out of 2mm thick sheet steel, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated, cable alley, inter-connection with suitable size solid Aluminium strip, having switchgears and accessories, mountings and internal wiring, earth terminals and earthing, numbering etc. complete in all respects with following Incoming / Outgoing / accessories, suitable for operation on 415V, 3 phase, 50Hz, AC Supply with enclosure protection class IP42 as required alongwith Digital VIF Meters including CT Coils of requisite Ratio / Selector Switches / LED Indications / locking arrangement etc. as per the drawing approved by the Engineer in Charge:(i) 1600A, 4Pole, ACB, 50kA, O/L, S/C & E/F, Microprocessor Based, Electronic / Microprocessor Tripping Type, Electrical Draw-Out type : 1 Nos.(ii) 2000A, TPN, Aluminium Busbar: 1 Set(Schneider / ABB / LK / Siemens) |
| 3 | Providing and erection of 11 Mtr. Long Pole (ST-410 SP56) with Base Plate and Top Cap cover confirming to IS 2713 with up to date amendments |
| 4 | Cement bottoming 1:2:4 mix as per Standards 0.75 cum / Pole |
| 5 | Providing and fixing of 11 kV Gapless Surge Arrestor, 9 kV, 10 kA, LA with polymer housing, Stn. Type |
| 6 | Providing and fixing of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 7 | Supply, Installation, testing & commisioning of 11 kV Isolator, Double Break,3-pole, 630 Amp, horizontal mounting Type, with Earth Switch |
| 8 | Providing and fixing of 11 kV Horn Gap Fuse Set 3 Phase 200A |
| 9 | Providing and fixing of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with fitting |
| 10 | Providing and fixing of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 11 | Providing and fixing of GI Channel/Angle/Flat of sizes including clamps for L.A Set/G.O Set/Horn Gap |
| 12 | Providing and fixing of Galvanized Nuts and Bolts. |
| 13 | Providing and fixing of GI V cross-arm with top Bracket including clamp |
| 14 | Providing and laying of 100 mm² ACSR Conductor (Dog) |
| 15 | Providing and fixing of GI Barbed Wire for Anti Climbing |
| 16 | Providing and applying Red Oxide |
| 17 | Providing and applying Aluminium Paint |
| 18 | Sundry items like Aluminium lugs, Jumpers, binding Tape |
| 19 | Earthing with copper earth plate 600 mm × 600 mm × 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal coke and salt as required. The Job includes providing, laying and fixing of 25 × 5 mm Copper strip to be laid from the earth plate (gas-welded with the plate) upto a height of 300 mm above the ground level. |
| 20 | Providing and fixing 25 mm × 5 mm copper strip in 40 mm dia, 2mm thick, PVC Pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 21 | Supply, installation, testing and commissioning of outdoor-type, 11kV Vacuum Circuit Breaker (VCB) having:Nominal System Voltage: 11 kV (Highest system voltage: 12 kV), Rated Normal Current: 630 A, Short-Circuit Breaking Current: 20-40kA for 3 seconds, Rated Making Capacity: 50kA (peak), Rated Frequency: 50 Hz, Impulse Withstand Voltage: 75 kVp to 95 kVp, Power Frequency Withstand: 28 kV rms to 36 kV rms(Schneider / ABB / LK / Siemens) |
| 22 | Fabrication, supply, installation testing & commissioning of compartmentalized, outdoor-type, Electrical Panel of cubical construction, having 6 Nos. Angle-iron legs of suitable dimensions, to be sufficiently grouted (> 750mm depth), in 1:2:4 concrete mix, onto outdoor land / concrete as per site requirement, fabricated out of 2mm thick sheet steel, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated, cable alley, inter-connection with suitable size solid Aluminium strip, having switchgears and accessories, mountings and internal wiring, earth terminals and earthing, numbering etc. complete in all respects with following Incoming / Outgoing / accessories, suitable for operation on 415V, 3 phase, 50Hz, AC Supply with enclosure protection class IP42 as required alongwith Digital VIF Meters including CT Coils of requisite Ratio / Selector Switches / LED Indications / locking arrangement etc. as per the drawing approved by the Engineer in Charge:Incoming:(i) 1600A, 4Pole, ACB, 50kA, O/L, S/C & E/F, Microprocessor Based, Electronic / Microprocessor Tripping Type, Electrical Draw-Out type : 1 Nos.(ii) 1600A, 4Pole, Manual Changeover Switch : 1 Nos.(iii) 2000A, TPN, Aluminium Busbar: 1 SetOutgoing:(i) 400A, 35-36kA, 4P, Thermal and Magnetic adjustable, MCCB: 2 Nos(ii) 250A, 35-36kA, 4P, Thermal and Magnetic adjustable, MCCB: 2 Nos(iii) 100A, 35-36kA, 4P, Thermal and Magnetic adjustable, MCCB: 4 Nos(iv) 63A, 35-36kA, TPN, MCBs: 6 Nos(v) 32A, 35-36kA, DP, MCBs: 10 NosThe Panel must have provision for installation of 1600A, 4Pole, ACB, 50kA, Electrical Draw-Out type as its second incomer.(Schneider / ABB / LK / Siemens) |
| 23 | (a) Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,All kinds of soil, Rate for a lead upto 50 meter beyond 1 m from cutting edge. e/w for 1 bed = 8' × 8' × 2' = 128cft = 3.73 cum. |
| 24 | b) Supply & laying of dry stone soling hand packed tightly in place including carraige from approved source.8' × 8' × 1'=64 cft = 1.86 cum |
| 25 | c) Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering (All works up to plinth level) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) . 8' × 8' × 6''= 32cft = 0.93 cum |
| 26 | d) Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 8'× 8'× 5'6'' = 224 cft = 10.25 cum MINUS 0.3 cum Cut-Out section for cables.i.e., 10.25 - 0.3 = 10 cum (say) |
| 27 | e) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D Qty vide item (d) @ 35 kg/cum |
| 28 | f) Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 29 | Supplying and erection of stay set complete (galvanised) with 12/90 mm dia. x 1.8 m long stay rod, anchor Plate of size 45cm x 45cm x7.5mm, thimble, stay clamps, turn buckle (20mm x 60cm), 7/4.00mm dia GI Stay wire and strain Insulator etc. in Cement concrete 1:3:6 (1 Cement, 3 coarse Sand, 6 graded stone aggregate 40mm nominal size) foundation including excavation and re-filling etc., as required. |
| 30 | Supply, testing, laying, connecting & commissioning of 630 sq. mm, 1.1kV grade, Single-core, Aluminium Conductor, XLPE Sheathed Armoured Cable (ISI Marked), including PVC tagging after every 5 metres. The Job includes providing and fixing of MS Clamps (for fixing of cables onto wall or as per instructions of the site engineer). The Job includes end-termination of spans of the cable at locations as per the instructions of the site engineer. The Cable is to be laid in spans of lengths as per the instructions of site engineer.(Havells / KEI / Polycab) |
| 31 | Supply, testing, laying, connecting & commissioning of 800 sq. mm, 1.1kV grade, Single-core, Aluminium Conductor, XLPE Sheathed Armoured Cable (ISI Marked), including PVC tagging after every 5 metres. The Job includes providing and fixing of MS Clamps (for fixing of cables onto wall or as per instructions of the site engineer). The Job includes end-termination of spans of the cable at locations as per the instructions of the site engineer. The Cable is to be laid in spans of lengths as per the instructions of site engineer.(Havells / KEI / Polycab) |
| 32 | Supply, testing, laying, connecting & commissioning of 240 sq. mm, 1.1kV grade, 3.5-core, Aluminium Conductor, XLPE Sheathed Armoured Cable (ISI Marked), including PVC tagging after every 5 metres. The Job includes providing and fixing of MS Clamps (for fixing of cables onto wall or as per instructions of the site engineer). The Job includes end-termination of spans of the cable at locations as per the instructions of the site engineer.(Havells / KEI / Polycab) |
| 33 | Supplying and laying 25 mm × 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 34 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part ll complete with fitting and cutting, jointing etc.direct in ground (>450 mm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.,complete as required. |
| 35 | 300 mm dia (OD-300 mm & ID-255 mm nominal) |
| 36 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size),complete as per standard design including. excavation, reinforcement, shuttering, finishing and all allied items required for complete job including making the site good after completion of work as directed by engineer in chargeInside size 90x80 cm and 60 cm deep including C.I. cover with frame (Medium /Heavy duty) as per requirement at site. |
| 37 | Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25×3 mm |
| 38 | Making road cut in turfed footpath/earthen berm for laying of utility services, including removal of turf, excavation up to 1.0 m depth, upto 1.2m width, refilling with excavated earth in layers, compaction, dressing, and restoration of surface to original condition, complete, excluding the cost of pipes but including labour, carriage, and clearance of site and all incidental charges complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender