Tender For Construction Of Pre-Fabricated Shed For Relocation Of The Existing Boiler (Central Heating System) Installed At Vip Hut (Bobby Hut) At Pahalgam Advt.Cost=₹5.16 Lacs, Amount Without Gst= ₹4.37 Lacs, Gst Amount= ₹0.79 Lacs
Tender Value
5.16 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
4 days left
EMD
10320
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pre-Fabricated Shed For Relocation Of The Existing Boiler (Central Heating System) Installed At Vip Hut (Bobby Hut) At Pahalgam Advt.Cost=₹5.16 Lacs, Amount Without Gst= ₹4.37 Lacs, Gst Amount= ₹0.79 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m inwidth) and for shafts, wells, cesspits and the like not exceeding10 sqm on plan, including dressing of sides and ramming ofbottoms lift upto 1.5 m, including getting out excavated earthand disposal of surplus excavated earth as directed by EIC. AllKinds of soil |
| 2 | P/L of dry nallah soling tightly hand packed i/c carriage charges and headload charges complete job. |
| 3 | Providing and laying in position cement concrete of specifiedgrade Of 1:4:8 mix ( 1 cement : 4 coarse sand : 8 gradedstone agg.40 mm nominal size excluding cost of centering andShuttering all work up to plinth . |
| 4 | Providing and laying in position specified grade of reinforcedcement concrete including curing but excluding the cost ofcentering, shuttering, finishing and reinforcement. All worksupto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 gradedstone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness)including attached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost ofcentering shuttering, finishing and reinforcement.: 1:1½:3 (1cement : 1½ coarse sand : 3 graded stone aggregate 20 mmnominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | PROVIDING AND FIXING EXPOSED QUALITY SHUTTERING INCLD cost of all fittings complete using KITPLY/STEEL sheets complete job |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixingin position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes I/C ALL CARRIAGES |
| 10 | Structural steel work in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applyinga priming coat of steel primer all complete. |
| 11 | Providing and fixing glazing in aluminum door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawingsand the directions of engineer in-charge. (Cost of aluminumsnap beading shall be paid in basic item.)With floating glass panes of 3.5 mm thickness |
| 12 | Providing and fixing aluminum work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/appropriate Z-sections and other sections ofapproved make conforming to IS: 733 and IS: 1285, fixed withdash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws,tower bolts , handles , sliding mechanism all complete as per architectural drawings and the directions ofEngineer-in-Charge :Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 13 | Providing and fixing of 4 mm thick Aluminum Pannel Sheet both sides laminated including carriages all job complete as per the directions of EIC. |
| 14 | P/F P.U.F sandwiched panels in walls with tongue and groove fitting: 80 mm thick (size , color etc as recommended by engineer in charge) complete i/c all carriages |
| 15 | P/F P.U.F sandwiched panels in walls with tongue and groove fitting: 40 mm thick (size , color etc as recommended byengineer in charge) complete i/c all carriages |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with20mm nominal size stone aggregate.complete. |
| 17 | P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel with silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exteriorcoat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centerson all side and end lapps etc. (measured for unit of laid area) 0.50mm THICK (TATA, JSW COLORON PLUS OR EQ) I/C ALLCARRIAGES. |
| 18 | Providing and fixing plained eaves boarding of 2nd class kail wood 250x32 mm (nominal size ) including synthetic enamel paint (two coats ) over primer coat. Finished on one side and moulded on lower edge |
| 19 | carriage of material using mech tpt for an av. lead of 50 kms Sand/Bajri |
| 20 | carriage of material using manual tpt for an av. lead of 100 metres Sand/Bajri (Head Load) |
| 21 | Electric Part: wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/Polycab/Anchor/ Finolex/KEI/RR or equivalent make) incl. cost of conduit. |
| 22 | Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC 2 conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for MTR 20 loop earthing, etc. as required. (Maximum two points shall be connected on one circuit). (Havells/Polycab/ Anchor/Finolex/KEI/RR or equivalent) incl. cost of conduit |
| 23 | Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 16/20/25 A modular socket outlet and 16/20/25A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ABB/Schneider or equivalent) |
| 24 | Supplying and fixing of suitable size Gt box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ABB/Schneider or eq.) |
| 25 | Supplying and fixing of modular sockets/indicators/switches on existing modular plate and 5 switch box, incl. connections, etc. as required. (Havells/SSK/Anchor /ABB/Schneider or eq.) i. 3Pin 5A-10A Socket |
| 26 | ii. Indicator |
| 27 | Point wiring for 5A-10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or 6 surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire MTR 20 (loop earthing), (Maximum two points shall be connected on one circuit). (Havells/ Polycab/Anchor/Finolex/KEI/RR or equivalent) incl. cost of conduit |
| 28 | Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters having, minimum 80lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab/Govt. Of india, Operating temperature 7-10°C to +45°C. The job includes replacement warranty of fixture if damaged/burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/Crompton/Jaguar/Wipro). Commercial series. |
| 29 | Supplying and fixing of modular blanking plates on existing modular plate and switch box excluding modular plate as required. |
| 30 | Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits (Havells/Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire |
| 31 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA 14 \\"C\\" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution NO board complete with necessary connections. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender