Tender For Reapir/Renovation Of Room No 2/15 Main Secretariat Building. Cno-300 Np
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
0 days left
EMD
3840
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reapir/Renovation Of Room No 2/15 Main Secretariat Building. Cno-300 Np
BOQ
| Sl. No. | Item Description |
| 1 | \\"Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw 35 mm \\" |
| 2 | Providing and fixing of door closer to Aluminium doors by way of drilling screws etc. complete (ISI make) of standard makeLMR |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 4 | Providing and fixing aluminium work in doors, windows, ventilators, partitions with standard tubular section with dash fastener of required dia and shape and size jointed mechanically including ACP sheet/5mm thick /plain glass/ frosted glass/ laminated board panel complete with hardware fittings, powder coated aluminium, minimum thickness of powder coated 50 micron and conforming to IS 733 & IS 1285 (16 guage) complete job.LMR |
| 5 | Providing and fixing of 19mm thick ply including cutting, wastage, fevicol, nails, carriage etc. complete item of superior make (green, century, amulya , orchid) conforming BWP 710...... LMR |
| 6 | \\"Providing and fixing of 1mm thick summica including cutting, wastage, fevicols nails etc. complete (green, amulya, virgo) \\" |
| 7 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18mm (Area of slab upto 0.5 sqm) |
| 8 | Providing and fixing of UV shhets ( light weight , highly durable &standard make )for wall panels etc.including design with stips , cutting ,fixing ,wastage ,carriage ..complete job . |
| 9 | UPVC Window Three track three panels sliding window made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead /double glazing bead of appropirate dimension (Area of window above 1.75 sqm) |
| 10 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.149B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 11 | Providing and fixing of 5 to 6mm thick super heavy PVC wall panelling with PVC angles/ corners including all accessories/arrangement including cutting wasttage ..LMR. |
| 12 | Providing and fixing of Gypsumboard tile false ceiling sheets (9mm thick) 2'x2' as per pattern/design with G.I Channel frame work by way of drilling, fasteners screws, cutting wastage loading, unloading carriage etc. complete (boral or euivalent make) 6-8mm thick LMR |
| 13 | shifting of debries / cleaning site /other allied works at site by engaging skilled and unskilled labours ,unskilled |
| 14 | providing and fixing of 3mm thick ACP Sheet false ceiling with necessary aluminium frame work including filling of silicon in the groove /joints all complete |
| 15 | Engaging trolley for shifting of mulba from site to beyond the municipality limit incl. Loading and unloading complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender