Tender For Special Repair To Omq Bldg. No. P-17/1 And P-17/2 At Vsn, Nagpur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
5 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Omq Bldg. No. P-17/1 And P-17/2 At Vsn, Nagpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Oct-2026 | REVISED BOQ AND TENDER DOCS 8860 | BOQ | 04-Nov-2026 |
| 2 | 24-Oct-2026 | REVISED DATES AND REVISED BOQ AND REVISED TENDER DOCS | Date | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings of any thickness below or above ground level complete all as specified and directed. |
| 3 | Material & Labour for 25mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) complete all as specified and directed. |
| 4 | Material & Labour for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 5 | Material & Labour for Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 6 | Material & Labour for vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | Material & Labour for joint free Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | Material & Labour for Glazed ceramic coloured tiles in vertical surface 300*450*7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado complete all as specified and directed. |
| 9 | Material & Labour Rendering 10 mm thick as in backing coats of wall in CM 1:4 on fair face of brick walls/ concrete surfaces complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone wall/ceiling/chajjas etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 11 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles in cement mortar in 1:4 complete all as specified and directed. |
| 12 | Material & Labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 13 | Material & Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 14 | Material & Labour for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces finished even and smooth without using extra cement and water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 15 | Material & Labour for rendering 15 mm thick in CM 1:6 over brick or concrete surfaces, finished fair and even complete all as specified and directed. |
| 16 | Material & Labour for rendering 10 mm thick in CM 1:3 over brick or concrete surfaces on ceilling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Supply only approved intergral water proofing compound complete all as specified and directed. |
| 18 | Material & Labour for preparing newly plastered surfaces and applying two coats of acrylic distemper over one coat of primer over two coats of wall care putty complete all as specified and as directed. |
| 19 | Material & Labour for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 20 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint for new surface having VOC less than 50 g/Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats at any height incuding necessary scaffolding including preparation of existing surface complete all as specified and directed. |
| 21 | Material & Labour for preparing of old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed. |
| 22 | Material and labour for applying two coats of acrylic distemper over a coat of primer, over a coat of wall care putty on old decorated wall surfaces after complete removal of existing treatment complete all as specified and directed. |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint for old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats at any height incuding necessary scaffolding including preparation of existing surface complete all as specified and directed. |
| 24 | Taking down of chowkat with shutters without taking off shutters from the frame, exceeding 1.5sqm but not exeeding 2 sqm each complete all as specified and directed. |
| 25 | Taking down of chowkat with shutters without taking off shutters from the frame not exceeding 1.5sqm each complete all as specified and directed. |
| 26 | Material & Labour for 18/19mm thick Block boards, grade 2 quality interior grade commercial type fixed with screws to timber frame work complete all as specified and directed. |
| 27 | Supply & Fixing 2nd class hard wood plain solid, straight, chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at hoints complete all as specified and directed. |
| 28 | Supply & Fixing Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 29 | Supply & Fixing 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 30 | Supply & Fixing stainless steel 304 grade in frame work complete all as specified and directed. |
| 31 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 32 | Supply & Fixing second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) fitted to chowkats complete all as specified and directed. |
| 33 | Supply & Fixing mild steel flat iron hold fast including bolts conforming to Fe 410-0of E-250 complete all as specified and directed. |
| 34 | Material & Labour providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces with creosote complete all as specified and directed. |
| 35 | Supply & Fixing Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S squrare tube supppling in opening as per specification complete all as specified and directed. |
| 36 | Factory made solid panel PVC doors shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specified complete all as specified and directed. |
| 37 | Dismantling of Wall and ceiling boards (fibre,pulp,insulation etc) or insulation boards /slabs /blankets ,any thickness including cover fillets complete all as specified and directed. |
| 38 | Material & Labour for 25mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber framework complete all as specified and directed. |
| 39 | Material & Labour for 1.5 mm thick Decorative laminate type 1 of surface finish ,colour and pattern as approved complete all as specified and directed. |
| 40 | Material & Labour for 6mm thick Cover fillets of standard hard board 40mm wide and fixing with screws complete all as specified and directed. |
| 41 | Supply & Fixing 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one complete all as specified and directed. |
| 42 | Supply & Fixing butt hinge, medium weight ,cold rolled mild steel 100mm long complete all as specified and directed. |
| 43 | All as per item NO 42 above but 75mm long. |
| 44 | Supply & Fixing aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed complete all as specified and directed. |
| 45 | Supply & Fixing floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm complete all as specified and directed. |
| 46 | Supply & Fixing aluminium anodised barred tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. |
| 47 | All as per item No 46 above but 100mm long complete all as specified and directed. |
| 48 | Supply & Fixing extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed. |
| 49 | All as per item No 48 but 100mm long complete all as specified and directed. |
| 50 | Supply & Fixing hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long complete all as specified and directed. |
| 51 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 52 | Supply & Fixing framed work such as grills, gratings, gates etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings, framework of water tanks and similar work complete all as specified and directed. |
| 53 | Supply & Fixing Aluminium framed windows any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing complete all as specified and directed.Note-: Glazing shall be measured and paid separatly. |
| 54 | Supply & Fixing aluminium louvered type ventilator weighing 0.55kg/M with 4mm thick frosted glass and all fittings, closing and opening type complete all as specified and directed. |
| 55 | Supply & Fixing 4mm thick sheet plain glass ordinary quality and glazing with in squares exc 0.5 sqm in each pane complete all as specified and directed. |
| 56 | Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 57 | Supply & Fixing of high strength fancy type ornamental curtain rod of outer dia 19mm & inner dia of 16mm including matching colour galvanised steel brackets of thickness 1.6mm complete all as specified and directed. |
| 58 | Material & Labour for preparintg of new painted surface of steel and iron work of any description not specifically mented otherwise mentioned otherwise over10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 59 | Material & Labour for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 60 | Dismantling of stone slabs and tiles of any description or thickness in floors ,aprons etc complete all as specified and directed. |
| 61 | Material & Labour for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment matches with shade of granite complete all as specified and directed. |
| 62 | Material & Labour for providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) 75mm thick finishing cement concrete surfaces even and fair without using extra cement as in plinth protection , path etc including necessary form work and provision of joints filled with bitumen complete all as specified and directed. |
| 63 | Supply & Fixing Grating doom 100mm dia of (Minium weight 25gms) complete all as specified and as directed. |
| 64 | Supply & Fixing 32mm dia ,polythelene pipe (LDPE) of low density of pressure rating 6kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one complete all as specified and directed. |
| 65 | Supply & Fixing PVC connection 15mm size with PTMT nuts of length 450 mm including taking down old one complete all as specified and directed. |
| 66 | Supply & Fixing100mm bore Slotted vent cowl complete all as specified and as directed. |
| 67 | Material & Labour for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 68 | Supply & Fixing 75mm PVC (SWR) bend any radius complete all as specified and directed. |
| 69 | Supply & Fixing 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 70 | Supply & Fixing PVC SWR 75 mm bore pipe single socketed in any length with rubber ring joints fixed to walls / trenches or in floors complete all as specified and directed. |
| 71 | Supply & Fixing PVC SWR 110 mm bore pipe single socketed in any length with rubber ring joints fixed to walls including taking down old one complete all as specified and directed. |
| 72 | Supply & Fixing 15mm dia Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair complete all as specified and directed.Make: Code- Jaquar FLR 5047N Quarter turn or equivalent in Hindware/ Cera |
| 73 | Supply & Fixing paper holder of fixed to walls with chromium plated (CP) brassscrews complete all as specified and directed. Code : AHS-1553 paper holder of Make -Jaquar or equivalent in Hindware/ Cera |
| 74 | Supply & Fixing Wash basins vitreous china (flat baci or angle back type andy size ,including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and directed.Make: Code: JDS-WHT-25501 semi-recessed Basin size (MM)400 xMake-430X525X170 of Make- Jaquar or equivalent in Hindware/ Cera |
| 75 | Supply & Fixing Chromium plated shower roses with or without swevel joints andy size including fixing to steel pipe or union complete all as specified and directed.Make: CODE- OHS 1789 over head shower 120mm dia Make-Jaquar or equivalent in Hindware/ Cera |
| 76 | Supply & Fixing Glass shelf 22' with brass chromium plated railling complete all as specified and directed.Make: Jaquar Code: AKB-35771 or equivalent in Hindware/ Cera |
| 77 | Supply & Fixing Glazed corner with brass chromium plated railling complete all as specified and directed.Make: Jaquar Code: CAN-1173 or equivalent in Hindware/ Cera |
| 78 | Supply & Fixing Towel rail of stainless steel including screws and wooden /plastic cleats complete all as specified and directed.Make: Jaquar Code: AHS 1581H towel Rack with lower hanger or equivalent in Hindware/ Cera |
| 79 | Supply & Fixing CP soap dish including fixed to plugs with chromium plated brass screws complete all as specified and directed.Make: Jaquar Code :AQN-7731 or equivalent in Hindware/ Cera |
| 80 | Supply & Fixing Brass chromium plate concealed stop cock full turn regular body with adjustable wall flange size 15mm complete all as specified and directed.Make: Jaquar Code-CON-083 KN or equivalent in Hindware/ Cera |
| 81 | Supply & Fixing Brass chromium Flated mode 3 in 1 wall mixture model regular half turn of make jhonson mode regular or equivalent complete all as specified and directed.Make: Jaquar Code CON-281KN or equivalent in Hindware/ Cera |
| 82 | Supply & Fixing PVC mirror cabinet of size 350x450mm of make PRAYAG PODUCT CODE NO551 or equivalent including taking sown old inbuilt cabinet complete all as specified and directed. |
| 83 | Supply & Fixing Brass chromium plated tumbler holder complete all as specified and directed. Make: Jaquar CODE: AKP-35741P or equivalent in Hindware/ Cera |
| 84 | Supply & Fixing Low level flushing cistren (exclusive of brackets) and connections to pipes and fixing of chain and pull or lever if any complete all as specified and directed.Make: -Jaquar CHS-WHT-205 or equivalent in Hindware/ Cera |
| 85 | Supply & Fixing brass chromium plate pillar cock quarter turn type of make Jaquar FUS-29052 B or equivalent in Hindware/ Cera central hole basin mixer with popup waste system with 450mm long braided hoses complete all as specified and directed. |
| 86 | Supply & Fixing water closet (squatt pattern complete including provision of lime concrete beddingane vitreous china wash white (excluding fixing bolt ,fiushing cistern and flush pipe) (EWC) of make Jaquar Code No- CNS-WHT-853P180SPPSM or equivalent in Hindware/ Cera in 'S' or 'P' trap Size 370X665X750 mm Make-Jaquar or equivalent complete all as specified and directed. |
| 87 | Supply & Fixing plastic water closet seat, cover black ,closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device of make Jaquar Code No- CNS-WHT-111N or equivalent in Hindware/ Cera (soft closing seat cover) Make- Jaquar or equilvalent complete all as specified and directed. |
| 88 | Supply & Fixing 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair complete all as specified and directed.Code :OPL-15041 of Make Jaquar or equivalent in Hindware/ Cera |
| 89 | Supply & Fixing brass chromium plate hand shower(Health faucet) with 1meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer) complete all as specified and directed.Code No : ALD-577 Make Jaquar or equivalent or equivalent in Hindware/ Cera |
| 90 | Supply & Fixing Towel rack 600mm long with lower hangers of CP with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and directed.Make of Jaquar Code: AQN-7781 or equivalent in Hindware/ Cera |
| 91 | Supply & Fixing in repair stainless steel wall mounted rack of size 630 x700 x220 mm and thickness of sheet not less than 0.05 mm with porch of keeping plates and other crockery fixed with screw and rawal plug etc on wall complete all as specified and directed. |
| 92 | Supply & Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed. |
| 93 | Supply & Fixing in repair 2 way swan neck Pillar tap brass CP fancy type, foam flow, 15mm with capston heads , screwed down high pressure for wash hand basin complete all as specified and directed. |
| 94 | Supply and fixing SS 304 steel grade 5mm wire Thali basket (17x20x8) inch complete all as specified & directed . |
| 95 | Supply and fixing SS 304 steel grade 5mm wire Cup- saucer basket(17x20x4) inch complete all as specified & directed . |
| 96 | Supply and fixing SS 304 steel grade Plain utility (17x20x4) inch complete all as specified & directed . |
| 97 | Supply and fixing SS 304 steel grade 5mm wire plain utility(17x20x8) inch complete all as specified & directed . |
| 98 | Supply and fixing SS 304 steel grade 5mm wire cutlary basket(17x20x4) inch complete all as specified & directed . |
| 99 | Supply and fixing Teliscopic channels 500mm regular complete all as specified and directed. |
| 100 | Supply and fixing Nickel and chromium plated auto close hinges regular complete all as specified and directed. |
| 101 | Supply and fixing shutter in 18 mm waterproof marin ply with both lamanation one side white and other side of specified colour as directed with edge binding complete all as specified and directed. |
| 102 | Supply and fixing 600mm carecase made with MDF and doors with Marino ply with both side lamination one side white and other side of specified colour as directed with edge binding complete all as specified & directed. |
| 103 | Supply and fixing decorative type handles complete all as specified & directed. |
| 104 | Supply and fixing 20 G steel hollow section welded frame with powder coated (white colour) of various section for base frame complete all as specified & directed. |
| 105 | Supply & Fixing asbestos Cement sheet 12mm thick for loose (panel) complete all as specified and directed. |
| 106 | Supply & Fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 107 | Supply & Fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed. |
| 108 | Taking down carefully existing bitumen tarfelt including plaster, concrete/brick coba /tiling from the roof till RCC slab and roughining the surface , and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing complete all as specified and directed. |
| 109 | Material and labour for roof treatment on RCC accessible roof slab including parapet if any etc. complete as mentioned below, complete all as specified and directed. :-(i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. 117 hereinafter of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv)rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces (v) Cleaning the plastered roof surfaces and applying a coat of hot blown bitumen primer 85/25 @ 0.3 kg/sqm on top of dry surface.(vi) Laying Aluminium Foil over APP membrane of 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame \\"torch', application method all as per manufacturer's instructions. |
| 110 | Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 with WPC for laying floor finishes complete all as specified and directed. |
| 111 | Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed with chemical compound as per manufactures instruction as approved by GE complete all as specified and directed. |
| 112 | Material & Labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate filleting and benching slightly rounded/ roof slabs to fill undulations to achieve uniform slope complete all as specified and as directed. |
| 113 | Material & Labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 114 | Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and complete all as specified and directed. Note:- After ascertaining the location of leakage/ seepage/dampness ,this item shall be operated at the required location. |
| 115 | Providing and applying the surface with Acrylic primer: Asian Paints SC Infinia Primer or equivalent in Sika/ STP with a minimum consumption of 0.10-0.15 Kg/Sqm, followed by application of best in class, PUD based, fleece reinforced, weatherproof and waterproofing coating for UV exposed terace surfaces Asian Paints SmartCare or Berger / Nerolac/ Fosroc with consumption of 1.8 kg/Sqm in 3 coats to achieve DFT of 1±0.1 mm. A 50 GSM non-woven needle punched fleece to be embedded during the application of 2nd coat. The cured membrane with reinforced fleece should have the below properties:> Surface Temperature Reduction by Temperature resistance Test : Upto 10 Degrees as per ASTM D4803> Elongation at break >70% as per ASTM D 2370> Tensile strength > 3.5Mpa as per ASTM D 2370 > Crack Bridging Ability> 6 mm as per AS NZ 4548 > Puncture Resistance - > 200 N as per ASTM E 154> Pull-off Adhesion Strength to Concrete >1.5 MPa as per ASTM D7234> Solar Reflective Index > 100 as per ASTM E 1980> Passes Resistance to Dynamic Indentation 5.9 Joules Impact/10 mm Dia @25 deg Celsius as per EOTA: TR-006> Passes Resistance to Static Indentation 200 N Load/ 10 mm Dia. Indentor @25 deg Celsius as per EOTA:TR-007> Passes Resistance to Fatigue Movement Test @ -5 deg Celsius/ 1000 cycles as per EOTA: TR-008> Resistance to low temperature by Dyanmic Indentor @ 0 deg Celsius, 5.9 Joules Impact/10 mm dia. indentor as per EOTA:TR-006> Resistance to heat ageing @80 deg Celsius/200 days. Post 200 days the values of membrane performance for dynamic & static indentation tests, tensile strength & elongation values should not exhibit a change of more than 10%> No blistering observed on visual inspection subject to resistance to waterageing test @60 deg Celsius for 180 days> No chalking or flaking observed on exposure to aritificial weathering test in ATLAS Xenon arc reactor for 4200 hrs. The values of membrane performance for tensile strength, elongation at break & crack bridging ability values should not exhibit a change of more than 10% |
| 116 | Material & Labour for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and finishing the surface apply epoxy base resin of manufacturer pidicrete and choksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site complete all as specified and directed. |
| 117 | Material & Labour for cutting groove exc 200mm but n exc 250 mm girth in brick or stone walls and making good the surfaces using PCC 1:2:4 type B0 in CM 1:3 after inserting water proof bituminus membrane complete all as specified and directed. |
| 118 | Taking up/down steel tubing 15 mm bore and connection including cleaning/removal to store complete all as specified and directed. |
| 119 | All as per item No 118 above but steel tubing 20 mm bore. |
| 120 | Supply & Fixing GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed. |
| 121 | All as per item No 118 above but of bore 20 mm dia. |
| 122 | Supply & Fixing 20 mm dia Stop valves, cast cpper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions and fixed complete all as specified and directed. |
| 123 | Supply & Fixing 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 124 | Supply & Fixing 25 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 125 | Repairs to RCC exposed surfaces by removing the loose material, cleaning the reinforcment with rust remover & applying fosroc's construction solution (renderoc HS XTRA )bonding agent and finishing the same 20 mm thick CM (1:3) with mixing adhesive as direction of manufacturers complete all as specified and directed. Note: Reinforcement shall be welded to exposed reinforced if necessery, the same shall be measured & paid seperately. |
| 126 | Material & Labour for 6 to 8 mm dia reinforcement mesh including welding to the existing reinforcment of exposed reinforcement complete all as specified and directed. |
| 127 | Demolition of reinforced cement concrete in (reinforcement cut as required to facilitate demolition) , chajjas, beams and similar suspended work including floor finishes complete all as specified and directed. |
| 128 | Material & Labour for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 129 | Material & Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed. |
| 130 | Material & Labour for RCC type M-25 mix using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed. |
| 131 | Material & Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions, work in rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and as directed . |
| 132 | Material & Labour for RCC type M-25 mix using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 133 | Material & Labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed. |
| 134 | Material & Labour for RCC type M-25 mix using 20mm graded aggregates as in , beams complete all as specified and as directed. |
| 135 | Material & Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed. |
| 136 | Material & Labour for RCC type M-25 mix using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 137 | Material & Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 138 | Material & Labour for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 139 | Material & Labour for complete removal of existing treatment and applying cement base paint on wall surfaces including cornices ,pillasters etc and preparing the surfaces including extrior wall care putty ( Make Birla) and applying two coat of exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints complete all as specified and directed. |
| 140 | Supply & Fixing precast oramental type POP cornices of width not exceeding 250mm on both side at the junction of wall and ceiling wall all necessary fixtures complete all as specified and directed. |
| 141 | Supply & Fixing in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes, channels assembly, locking system to hide rope knot rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. |
| 142 | Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres complete all as specified and directed and removed from site. NOTE:- Dismantled water tank shall become the contractors property as per Sch of credit. |
| 143 | Supply & Fixing 1000 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 144 | Dismantling existing PVC water tanks exc 500 litres & n. exc 1000 litres and removing in store complete all as specified and directed. |
| 145 | Supply & Fixing 500 Ltr Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 146 | Material & Labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 147 | Material & Labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 148 | E/M PORTION |
| 149 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and directed. |
| 150 | Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing complete all as specified and directed. |
| 151 | Material & Labour for sub main wiring (concealed) complete with four single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and directed.Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit |
| 152 | Material & Labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and directed.Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit |
| 153 | Material & Labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and directed.Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit |
| 154 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed. |
| 155 | Material & Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.(a) One light point controlled by one switch |
| 156 | (b) One fan point controlled by one switch |
| 157 | (c) One exhaust fan point controlled by one switch. |
| 158 | (d) One bell/ buzzer point controlled by one push switch. |
| 159 | (e) One switch socket outlet modular type 3 pin 6 amp on same board. |
| 160 | (f) One light point controlled by two, two way switches, |
| 161 | All as per item No 154 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on Independent board complete all as specified and directed. |
| 162 | All as per item No 154 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and directed. |
| 163 | Note for Item No. 148 to 156 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. (ii) The rate for point wiring shall deemed t obe included the cost for making good. |
| 164 | Supply & Fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V complete all as specified and directed.Make : CG Cat Part No. LSTS-25-CDL Note : The rate quoted shall deemed to be included the cost for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed. |
| 165 | Supply, Installation, Testing and Commissioning of 10 Watt LED Bulkhead with a nominal system lumen output of 1000 lumens and a minimum system efficiency of 100 lm/W. Make : Crompton cat no. LBHE-10-CDL or equivalent in Surya/ Phillips |
| 166 | Taking down old Old u/s and Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro. |
| 167 | Supply & Fixing Surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . |
| 168 | Supply & Fixing Surface mounting LED Luminaries mirror light 9 Watt, 3 in 1 color LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed. Make: Luker Cat No : LM3C9 or equivalent to Cropmton/ Phillips |
| 169 | Supply & Fixing 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent to L & T/ Seimens/ Havells |
| 170 | Supply & Fixing calling bell ding dong type , AC, single pole one way 230 volts complete all as specified and directed. |
| 171 | Supply & Fixing bell push switch, modular type, 6 Amps, 1 module, 230 volts complete all as specified and directed.Make : Legrand Cat No. 675504 or equivalent in L & T/ Seimens/ Havells |
| 172 | Supply & Fixing switch modular type single pole two way 6 amps 230 volts, complete all as specified and directed.Make : Legrand Cat No 675502 or equivalent in L & T/ Seimens/ Havells |
| 173 | Supply & Fixing Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, complete all as specified and directed.Make : Legrand Cat No. 675501 or equivalent in L & T/ Seimens/ Havells |
| 174 | Supply & Fixing socket modular type 6 Amps 3 pin 2 module 230 volts complete all as specified and directed.Make : Legrand Cat No. 675551 or equivalent in L & T/ Seimens/ Havells |
| 175 | Supply & Fixing for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals complete all as specified and directed. |
| 176 | Supply & Fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts complete all as specified and directed. Make : Legrand Cat No. 675555 or equivalent in L & T/ Seimens/ Havells |
| 177 | Supply & Fixing switch modular type 16 Amps, one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in L & T/ Seimens/ Havells |
| 178 | Supply & Fixing power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,230 volts complete all as specified and directed.Make : Legrand Cat No. 675558 or equivalent in L & T/ Seimens/ Havells |
| 179 | Supply & Fixing sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way, 240 volts, as per IS-8623 complete all as specified and directed. Make : Legrand Cat No 507611 or equivalent in L & T/ Seimens/ Havells |
| 180 | Supply & Fixing sheet metal enclosures for SPN DB's 2 way, 240 volts, as per IS-8623 all as specified and as directed. |
| 181 | Supply & Fixing MCB SPN, 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and directed.Make : Legrand Cat No. 408617 or equivalent in L & T/ Seimens/ Havells |
| 182 | Supply & Fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and directed. |
| 183 | Material & Labour for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point complete all as specified and directed.Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall deemed to be included in the unit rate for earthing all as specified and as directed. |
| 184 | Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store complete all as specified and directed. |
| 185 | Supply & Fixing New Exhaust fan PVC body 10\\" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed. |
| 186 | Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan all as specified and as directed. |
| 187 | Supply & Fixing Energy saving ceiling fan 1200 mm sweep min air delivery 210 CFM with double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. |
| 188 | Supply & Fixing Wall mounted fan of size 16\\" plastic body including all acessories and connected material complete all as specefied and directed. |
| 189 | Taking down old geyser and depositing it to E/M store and Refixing the same at exact location including making electric and water connection complete all as specefied and directed. |
| 190 | Supply & Fixing, testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated pressure of 8 bar, unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflector alongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Nov 04, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender