Tender For Special Repairs To 02 X Toilets Of Bldg No Np-79 Under Ge (A) Ahmedabad Cantt
Tender Value
14.56 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
2 days left
EMD
29500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To 02 X Toilets Of Bldg No Np-79 Under Ge (A) Ahmedabad Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (ARMY) AHMEDABAD NAME OF WORK : SPECIAL REPAIRS TO 02 X TOILETS OF BLDG NO NP-79 UNDER GE (A) AHMEDABAD CANTT CONTRACT AGREEMENT: GE (A)/ABD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. |
| 3 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed. |
| 4 | S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed. |
| 5 | M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. |
| 6 | S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed. |
| 7 | S&F aluminium powder coated framed windows/ ventilator, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed. make Jindal |
| 8 | S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) |
| 9 | S/F Factory Made Solid PVC Moulded Door with particle bd core Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with supplying & fixing in frame at site as per specification & drawing |
| 10 | S&F solid PVC door/ cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed |
| 11 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | M&L for Endura coloured tiles 9 to 10 mm thick (square/rectangular) , area of each tiles not exceeding 0.11 sqm, in floors etc. set and jointed with neat cement slurry and pointed with incl 15mm thick Screed bed in CM 1:4 complete all as specified and directed. |
| 13 | M&L for Non Skid joint free ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed. |
| 14 | M&L for Glazed ceramic coloured tiles of size 300 x600 x 9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat CM 1:3 complete all as specified and directed. |
| 15 | M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3) including rounding of all exposed edges complete all as specified. |
| 16 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 17 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified and as directed. |
| 18 | Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth. |
| 19 | M&L for Cast iron Nahani trap,75 mm bore with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed. |
| 20 | S&F in repair fancy type Bib taps 15mm bore CP with wall flange , screwed down, screwed for iron pipe or for brass ferrule and fixed. Jaquar cat part no: QQT-7037 or equivalent. |
| 21 | S&F wash basin mixer, for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make of catalog no. QQT-7167B or equivalent company. |
| 22 | S&F in fix in repair Wall mixer double lever arm kit of Hi -flow Divertor consisting of operating lever wall falnge with seals and button only . mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make CATALOG NO. QQT-7273UPR or equivalent. |
| 23 | S&F in repair Angular stop cock with wall flange of jaquar make CATALOG NO.QQT-7053 or equivalent. |
| 24 | S&F wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10955P18UFSM (inlusive of brackets), to pedestal pan including all joints, trapete. |
| 25 | S & F in repair flushing cistern slim concealed cistern body with drain pipe connection site for wall hung WC .CATALOG NO. ONS -WHT-2400S and flushing control plate catalog no. JCP-CHR-852415 with all accessories or equivalent. |
| 26 | S&F in repair vitreous china counter TOP wash basin, white, of size 425X425X145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long .catalog no ONS-WHT-10901 or equivalent. |
| 27 | S&F designer looking mirror of size 1350mmX900mm fixing on wall with brass fixing knob complete all as specified and directed. |
| 28 | S&F in repair single towel rail of 600mm long of jaquar make catalog no.AHS-CHR1581 or equivalent. |
| 29 | S&F in repar soap dish of jaquar make catalog no. AQN-CHR-7731 or equivalent.. |
| 30 | S&F in repair health faucet spray type incl 1.5M pipe, Make : Jaquar CAT: ALD-573 or equivalent. |
| 31 | S&F in repair over head shower with shower arm 140mm dia . Round shape single flow with air effect shower. ( ABS Body & Face Plate Chrome Plated) of jaquar CAT OHS-CHS-1757 and equivalent. |
| 32 | Supply & fix in repair toilet paper holder type, Make : Jaquar cat :AHS-CHR-1553 or equivalent. |
| 33 | Supply & fix in repair glass shelve type (Set of three) Make : Jaquar cat :AQN-CHR-7771 or equivalent. |
| 34 | S&F factory made 30 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc. complete all as specified and directed. |
| 35 | M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 36 | M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer. |
| 37 | S&F designer false ceiling made of 12 mm thick gypsum board of Saint gobin or equvivalent over and including all GI grid of standard quality to hold false ceiling including two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty complete all as directed and specified. |
| 38 | S&F designer gypsum /pop molding Cornice 100 -150 mm wide including two coats interior emusion of any colour over one coat of primer complete all as directed and specified. |
| 39 | Dismantling wall and celing board , including frame work any description fixed in any position complete all as specified and directed. |
| 40 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed. |
| 41 | M&L for rendering on other than fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3 % by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. |
| 42 | M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and fair without using extra cement complete all as specified and directed. |
| 43 | Supply only Integral waterproofing compound. |
| 44 | Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 45 | M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. |
| 46 | Demolition of cement concrete unreinforced concrete in ground floors and pavings and for where directed. |
| 47 | M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed. |
| 48 | Disconnecting existing tanks exc 500 but not exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). |
| 49 | S&F in repair Ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, 20mm bore, complete all as specified and directed. |
| 50 | S&F in repair Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe ) incl 32m dia polyethylene waste pipe complete including providing & fixing plugs bedding urinal against wall in cm(1:2) securing urinal to plug with bran screw complete all as specified and directed. |
| 51 | S &F in repair vitreous china coloured under counter wash basins Oval shape type bowl size ( 460x330x200 mm) including brackets complete all as directed by Engineer in charge,32m dia polyethylene fush pipe complete all as specified. |
| 52 | M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed. |
| 53 | M&L complete removal of existing treatment and applying three coat of white washing on wall surface complete all as specified and directed. |
| 54 | M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC. |
| 55 | Material & Labour for preparation new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 56 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 57 | Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed. |
| 58 | M&L for complete removal of existing treatment and applying applying two coats of exterior emulsion paint with anti algal properties over one coat of primer on walls with 1mm thick Exterior wall care putty anti algal properties(Apex ultima or equivalent) on complete all as specified and directed. |
| 59 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 60 | M&L for 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) incl necessary form work as in sub base of path complete all as specified and all as directed by engr-in-charge |
| 61 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 62 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment, set, jointed all as specified and as directed by Engr-in-charge. |
| 63 | Dismantling asbestos cement/CGI (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 65 | M&L for MS work as in roof trusses (framed) trussed, purlin, post, rafters including distant pieces, claeats includinjg cutting and welding required confirming to grade Fe-410-W(Gde-E-250) quality complete all as specified and as directed. |
| 66 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 67 | Dismantaling of Stone slabs and tiles laid in dry and pointed of any description or thickness in floors, aprons etc. complete all as spd |
| 68 | Dismantaling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 100 mm dia. |
| 69 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors bore of 110 mm including bends, complete all as specified and as directed. |
| 70 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs. |
| 71 | S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed |
| 72 | Taking down carefully aluminum / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 73 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed conduit wiring on wall/ floor etc including provision of branded pressed galvanised steel terminal box, 60 mm deep with earth dolly of suitable size concealed in wall and modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-One light point/Ceiling/Exhaust controlled by one switch |
| 74 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed conduit wiring on wall/ floor etc including provision of branded pressed galvanised steel terminal box, 60 mm deep with earth dolly of suitable size concealed in wall and modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-One 6A socket point controlled by one switch on independent board |
| 75 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed conduit wiring on wall/ floor etc including provision of branded pressed galvanised steel terminal box, 60 mm deep with earth dolly of suitable size concealed in wall and modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-One 6A socket point controlled by one switch on same board |
| 76 | All as per srl item no. 72 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board. |
| 77 | Supply & Fix in replacement of modular switch one way 6 amp 1 module all as specified and directed |
| 78 | S&F in replacement of modular switch one way 16 amp 1 module all as specified and directed |
| 79 | S&F in replacement of modular socket 6 amp 2/3 pin combined 2 module all as specified and directed |
| 80 | S&F in replacement of modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed |
| 81 | Supply and fix in replacement of modular ceiling rose 6 Amps, 3 plate, 240V, 50Hz complete all as specified and directed. |
| 82 | Taking down carefully aluminum or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete. |
| 83 | M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed for 2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire) (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 84 | Supply and fix LED tube light fitting Integral slim LED batten 20 watts with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 85 | Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and directed. |
| 86 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts 3 in 1 color modes with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 87 | Supply and fix LED light fitting mirror type with high out put diffuser with flexible neck for adjustable light angle,chrome finish aluminum housing, 12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 88 | Supply and fix in replacement of surface spotlight LED 7 W capacity, complete with die cast aluminum housing, high efficiency, with suitable reflector/lens, warm white/ full white with integrated electronic driver, including mounting base and other accessories and fixing on ceiling or wall surface, including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 89 | Supply and fix in replacement of LED Bldg/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.00m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified an directed. |
| 90 | Taking down existing old ceiling / exhaust fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 91 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 92 | Supply and fix MCB distribution board, SPN, 4 way in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 93 | Supply and fix MCB 63A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed. |
| 94 | Supply and fix MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed. |
| 95 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. |
| 96 | M&L for drilling/boring and tapping on existing CI/GI pipe pipe 80mm to 300mm dia size for branch connections of 15mm to 50mm dia by fixing of MS clamp of size 50x40mm cut to length and bent to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt and washer etc. and testing complete all as specified and directed. |
| 97 | S&F Gun-metal, globe or gate valves of bore dia 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 98 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed. |
| 99 | Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 100 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender