Tender For Various Strengthening Works At Vikas Vidyalaya (Ashram Paddhati, Ishwar Sharan Ashram, Prayagraj).
Tender Overview
Project Description
Tender For Various Strengthening Works At Vikas Vidyalaya (Ashram Paddhati, Ishwar Sharan Ashram, Prayagraj). 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. As Per Code No.2.8.1 Dsr 2023 2 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : — 1:5:10 (1 Cement : 5 Fine Sand Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) As Per Code No.4.1.11 Dsr 2023 3 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : — 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) As Per Code No.5.1.2 Dsr 2023
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. As per Code No.2.8.1 DSR 2023 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : — 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) As per Code NO.4.1.11 DSR 2023 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : — 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) As per Code No.5.1.2 DSR 2023 |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : — 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) As per Code No 5.2.2 DSR 2023 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: — Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR 2023 Code No 6.1.2 DSR 2023 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : — Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR 2023 Code No 6.4.2 DSR 2023 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : — Foundations, footings, bases of columns, etc. for mass concrete As per Code No 5.9.1 DSR 2023 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : — Columns, Pillars, Piers, Abutments, Posts and Struts As per Code No 5.9.6 DSR 2023 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : — Lintels, beams, plinth beams, girders, bressumers and cantilevers As per DSR 2023 Code No 5.9.5 |
| 10 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete — Thermo-Mechanically Treated bars of grade Fe-500D or more. As per Code No 5.22.B.1 DSR 2023 |
| 11 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. — In cement mortar As per Code No 15.7.4 DSR 2023 |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.As per Code No 15.56 DSR 2023 |
| 13 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. - For thickness of tiles 10 mm to 25 mm As per Code No 15.23.1 DSR 2023 |
| 14 | 12 mm cement plaster of mix : — 1:6 (1 cement: 6 fine sand) As per Code No 13.1.2 DSR 2023 |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS — 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. As per Code No 11.37 DSR 2023 |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per Code No 8.31 DSR 2023 |
| 17 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 As per Code No 16.78.1 DSR 2023 |
| 18 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in Charge With 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. As per Code No16.91.2 DSR 2023 |
| 19 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: — Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per Code No 14.5.1 DSR 2023 |
| 20 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (Outer Side Paint) As per Code No 13.88 DSR 2023 |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : — New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) As per Code No 13.46 DSR 2023 |
| 22 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. — Using M.S. angels 40x40x6 mm for diagonal braces As per Code No 10.5.1 DSR 2023 |
| 23 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. As per Code No.11.27 DSR 2023 |
| 24 | 15 mm dia nominal dia pipes As per Code No.18.8.1 DSR 2023 |
| 25 | 20mm dia nominal dia pipes As per Code No.18.8.2 DSR 2023 |
| 26 | 25mm dia nominal dia pipes As per Code No.18.8.3 DSR 2023 |
| 27 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore As per Code No.18.49.1 DSR 2023 |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per Code No.17.1.1 DSR 2023 |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require . (a) White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. As per Code No.17.7.4 DSR 2023 |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per Code No.18.48 DSR 2023 |
| 31 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipe 110mm dia As per Code No.12.41.2 |
| 32 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. As per Code No.17.73.2 DSR 2023 |
| 33 | S/F of Submercible pump of 2HP ISI Mark with starter cable stat wire in all complete (M/R) |
| 34 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete — 450 mm dia RCC pipes. As per Code No.19.35.1 DSR 2023 |
| 35 | Poviding and fixing of Sanitary Fittings items (M/R) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
TodayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender