Tender For (A) Providing Of Two X Toilet With Bathroom At Bldg No E-3 ( Otm Accn) Of Cod(B) Provn Of Toilet With Bathroom Near Bdlg No T-17 Of Cod(C) Provn Of Children Playing Park At Govt Md Accn (213 Colony) Of 506 Abw(D) Special Repair Of Bldg No T-16
Tender Value
31.22 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
18 days left
EMD
62446
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For (A) Providing Of Two X Toilet With Bathroom At Bldg No E-3 ( Otm Accn) Of Cod(B) Provn Of Toilet With Bathroom Near Bdlg No T-17 Of Cod(C) Provn Of Children Playing Park At Govt Md Accn (213 Colony) Of 506 Abw(D) Special Repair Of Bldg No T-16 A (Cook House) Of Cod Unger Ge (E) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge |
| 2 | Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and directed. |
| 3 | Removing excavated material exc. 50m but n exc. 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 4 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation / filling in sub base of floor and mass concrete complete all as specified and directed. |
| 5 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Columns, pillars, piers, posts, and struts complete all as specified and directed. |
| 7 | M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Beams , cantilivers , bressummers , lintles over 1.5 M span complete all as specified and directed. |
| 8 | M&L for RCC M-25 Design Mix in slab supported on walls, beams and columns in floors roofs landings balconies canoipes, deck slabs and in shelves complete all as directed. |
| 9 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed. |
| 10 | Use and waste of formwork rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars, posts, struts, piers etc.complete all as specified and directed. |
| 11 | Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bressummers, lintels, shelves etc. including supports, overhangs, etc, complete all as specified and directed. |
| 12 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as spd and directed. |
| 13 | S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl crancking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 14 | S & F TMT bars 6 to 8 mm dia , cut to length, bent to shape as required incl crancking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 15 | All as per Item No 14 here-in-before but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc. |
| 16 | Material and labour for brick work with Old Size fly ash brick straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 17 | M&L 10 mm thick plaster in CM(1:6) finished even & smooth with trowel without using extra cement shall be provided over all internal surfaces of wall complete all as specified and directed |
| 18 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note : Liquid WPC will be measured and paid seperately. |
| 19 | M&L for applying two coats of cement based paint on wall or concrete over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed |
| 20 | Supply only Liquid water proofing compound. |
| 21 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint & including 2 mm wall care putty complete all as specified and directed. |
| 22 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interval and corner complete all as specified and directed. |
| 23 | M&L for Moorum/red bajri filling, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.Note: Consolidated thickness shall be measured. |
| 24 | M&L for broken stone/boulders for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick in two layers watered and rammed to true surface complete all as specified and directed |
| 25 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor complete all as specified and directed |
| 26 | M&L for Non Skid coloured ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 27 | M&L for Glazed coloured ceramic tiles 350 x 250 x 7 mm/450 x 350 x 7 mm thick in vertical surface such as dado/skirting/ risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 28 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as specified & drawing complete all as specified and directed |
| 29 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 30 | S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top), minimum triple layer, hoisted and fixed in position complete all as specified and directed |
| 31 | S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimum weight 210 gm etc complete all as specified and directed |
| 32 | M&L for cutting channels, grooves or rebates exc 15cm girth,but n exc 30 cm and trimming surface all as specified and directed. |
| 33 | S&F 15 mm bore GI tubing, medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed |
| 34 | S&F 20 mm bore GI tubing, medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed |
| 35 | S&F stainless steel soap dish, of standard size and shape complete all as specified and directed |
| 36 | S&F vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified and directed. |
| 37 | S&F chromium plated two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed. |
| 38 | S&F Brass CP Wall mixer three hole incl provn of shower rose inlet 15 mm dia formixing hot & cold water screwed down for iron pipe and fixed complete all as spd and directed. |
| 39 | S&F Brass chromium plated Basin Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed. |
| 40 | S&F Bib tap 15mm bore fancy type chromium plated, cast copper alloy with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 41 | S&F 15mm Angle valves (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and as directed. |
| 42 | S & F 20 mm dia ball valve with iron wheel head screwed both for GI pipe and fixed complete all as specified and as directed. |
| 43 | S&F for CP Towel rail 600 mm long fixed with an incl chromium plated brass screws and wooden cleat (min wt 190 gms) complete all as specified and directed. |
| 44 | Supply and fix PVC connection 15mm size with PTMT nut of length 450 mm complete all as specified and as directed. |
| 45 | S&F Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 46 | S & F CP Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 47 | S& F CP jet sprey of leangth 1.25 m long fixed in position complete all as specified and as directed. |
| 48 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass shelf assembly complete all as specified and as directed. |
| 49 | S&F vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolt and plastic water closet seat white pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and as directed. |
| 50 | S&F 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and as directed. |
| 51 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 52 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 53 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 54 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 55 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 56 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 57 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 58 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 59 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 60 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 61 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 62 | S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete |
| 63 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work (reinforcement to be measured and paid separately) complete all as specified and as directed by Engr-in-Charge |
| 64 | Extra for Forming fair finished channel 30 cm inner girth in cement concrete using extra cement including mitered stopped ends etc complete. |
| 65 | Supply, laying & jointing 150 mm nominal bore (Internal Diameter) DWC (HDPE Double Wall Corrugated) Pipe, socketed & sewage pipe having 6.00 metre length, conforming to IS : 16098 (Part-II) of SN-4 Stiffness with & including necessary jointing materials etc complete all as specified & directed. |
| 66 | M&L for concrete bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested in cement conrete 1:3:6 type C-2 around 150mm dia complete all as specified and directed. |
| 67 | M&L On Site LLDPE Septic Tank designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below the foundation, with Vent shaft, with connection etc, complete for 05 Users complete all as specified and directed. |
| 68 | M&L for construction of soakage well of size 1.2m dia and 1.5m effective depth complete all as specified and directed.Note: Excavation in hard dense soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25 interconnecting pipes of RCC complete filled with brick bats complete all as specified and directed. |
| 69 | Provinding and fixing of Ventilators fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc by means of self expanding Screw all as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 70 | S&F 125 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 71 | S&F 125mm stainless steel hinges fixed with SS screws complete all as specified and directed. |
| 72 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 73 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 74 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed. |
| 75 | M&L for cement concrete in surface channels and drains concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and directed. |
| 76 | S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 77 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exc 4 kg/sqm complete all as sepecifed |
| 78 | Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face complete all as specified and directed. |
| 79 | M&L for Water Proofing Treatment on \\"Non Approachable/Non Accessible and Approachable Roof\\" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer complete all as specified and directed & Appicabale for 1.1 to 1.5 |
| 80 | M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces complete all as specified and directed. |
| 81 | M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm complete all as specifed and directed |
| 82 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces complete all as specifed and directed |
| 83 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction. including rmoval of existing one complete all as specified and directed. |
| 84 | M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint. Complete all as specified and directed. |
| 85 | Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.50 cum, getting out, returning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a distance n. exc 50 mtr and making good surface complete all as specified and directed. |
| 86 | M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate in foundation filling and mass concrete etc surrounding posts complete all as specified and directed. |
| 87 | S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe- 410-O or FE-310-O complete all as specified and directed. |
| 88 | S&F mild steel bolt 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagonal or square but length of bolt n. exc 5 cm long complete all as specified and directed |
| 89 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed |
| 90 | Supplyin only chain link MS galvanisd fencing, any size or type |
| 91 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel gate sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, runing rails and guides ) and hanging also fastning and fixing (steel confirming to FE-290 ( Gde E-165) complete all as specified and directed. |
| 92 | M&L for mild steel round bars upto and including 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.9mm dia all as specified conforming to Gde E-250 or Gde E 165 complete all as specified and directed |
| 93 | M&L preparation of new or previously untreated surfaces of steel and iron surfaces exc 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 94 | Ecavating over areas not exc 1.5 deep and getting out in soft/loose soil complete all as specified and directed. |
| 95 | M&L 100mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate finished even and rough surface without using extra cement complete all as specified and directed. |
| 96 | M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35 Grade with grey cement and pigment over stone dust filling complete all as directed.(Sand shall be measured and paid separately) |
| 97 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified. |
| 98 | Removing excavated materials not exc 50 mtr and depositing where directed complete all as specified and directed. |
| 99 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth coarses etc and similar work including necessary formwork complete all as specified and directed |
| 100 | Demolition of Cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for Complete all as specified and directed |
| 101 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 102 | Dismantling Stone slabs & tiles of any description or thickness in floors, aprons etc., laid bedded & pointed in any mortar complete all as specified and directed. |
| 103 | M&L for Machine cut Kota stone slab flooring 18-20 mm thick over & including 20 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 104 | M&L for colour rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed. |
| 105 | M&L for Machine cut Cudapph stone slab on cooking platform/shelf 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed. |
| 106 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 107 | Rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed. |
| 108 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed. |
| 109 | M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 110 | M&L for PCC 1:4:8 type C-1 using 20 mm graded crushed stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 111 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed. |
| 112 | M&L for Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 113 | M&L for Brick work withold size subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 114 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 115 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 116 | M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 117 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of white wash over on prepared brick work or concrete surfaces complete all as specified and directed. |
| 118 | M&L for complete removal of existing treatment on plasterd brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed . |
| 119 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces complete all as specified and directed . |
| 120 | M&L for applying two coat of cement based paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed. |
| 121 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coat of cement based paint on brick work or concrete surfaces complete all as specified and directed. |
| 122 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coats of white wash on brick work or concrete surfaces complete all as specified and directed. |
| 123 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & apply two coats of Synthetic enamel paint (ordinary tint) over & including a coat of pink primer complete all as specified and directed. |
| 124 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum triple layer, 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including taking down old u/s water storage tank and removing to store complete all as specified and directed. |
| 125 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 126 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 127 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 128 | Supplying &fixing 20 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laid in floors complete all as specified and directed. |
| 129 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore of pipe complete all as specified and directed. |
| 130 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed. |
| 131 | Dismantling of timber scantlings 40 Sq cm and over in section in any position unframed work and stacking at site where directed complete all as specified and directed. |
| 132 | Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed. |
| 133 | Dismantling of Asbestos cement sheet ( corrugated, semi corrugated etc) in roof covering roof covering complete all as specified and directed. |
| 134 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 135 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 136 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 137 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed. |
| 138 | S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 139 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 140 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins and sink with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed. |
| 141 | S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 142 | S&F in repair, Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 143 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 144 | S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flanges etc complete all as specified and directed. |
| 145 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement Complete all as specifed and directed |
| 146 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 147 | Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed. |
| 148 | Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 149 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specifed and directed |
| 150 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specifed and directed |
| 151 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. Note : Stainless Steel butt hinges & necessary S.S screws shall be paid separately. |
| 152 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain Skelton door shutter of size 30 mm thick including Supply and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature including aluminium grill of thickness 4 mm wire diameter to support wire mesh of apprroved pattern. WPC door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. Note : SS Mesh, aluminium grill to support mesh, Stainless Steel butt hinges & necessary S.S screws shall be paid separately. |
| 153 | Taking down old wooden/wood based particle board complete all as specified and directed. |
| 154 | S&F 18/19 mm thick high density PVC solid fibre board interior grade,prelaminated oneside with decorative choice lamination & other side balancing white lamination etc in kitchen cupboard etc complete all as specified and directed. |
| 155 | S&F 18/19 mm thick high density PVC solid fibre board interior grade, both side balancing white lamination etc in kitchen cupboard etc complete all as specified and directed. |
| 156 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 157 | S&F mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 158 | S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 159 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed. |
| 160 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 161 | Providing and fixing of double rebate openable/fixed windows (Eco 4000) made of galvanized steel colour coated/powder coated (base steel as per IS 513 of \\"D\\" quality, gavanized as per lS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50- 60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 X 20 mm and the fixed glass beading section 12x 12 mm, outer frame and mull ions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4 mm thick plain clear glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc.all as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 162 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in any type of soil etc complete all as specified and directed |
| 163 | M&L concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) Complete all as specifed and directed |
| 164 | Demolition and breaking up drain pipe (SGSW, AC or RCC) of internal dia 150mm set in cement mortar complete all as directed by Engr-in-Charge |
| 165 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specifed and directed |
| 166 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the ead included in the rates, including loading, unloading and stacking at the destination complete all as specifed and directed |
| 167 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. |
| 168 | Taking down carefully any type of old unserviceable submain wiring with PVC/steel conduit surface / concealed or wooden battens etc and making good the disturbed surfaces to match with the existing surface complete all as specified & directed by Engineer-in-Charge. |
| 169 | Taking down carefully any type of DBs including MCCBs and MCBs for keeping the old materials into safe custody or for taking credit(credit for above items should be made as per condition seaparately) and making good to the disturbed surface etc complete all as specified and directed. |
| 170 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, Connections of cable with MCBs or bus bar shall be drawn through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- |
| 171 | (a) One light point controlled by one way switch 5/6 amps. |
| 172 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 173 | (c) One socket out let 5/6 amps point on the same board |
| 174 | (d) One socket out let 5/6 amps point on the independent board |
| 175 | All as per item No 170 here-before but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 176 | All as per item No 170 here-before but with 1100 Volts grade copper stranded conductor FRLS cable of size 4 Sqmm main & with 4 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge. |
| 177 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 178 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 179 | S&F modular switch 6 Amps one module 230 volts AC complete all as specified and as directed. |
| 180 | S&F modular socket, 6A -2/3 pin combined 2 module,230 volts AC complete all as specified and as directed. |
| 181 | S&F modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed . |
| 182 | S&F modular switch 16 Amps one module 230 volts AC complete all as specified and as directed |
| 183 | S&F modular cover plate 2 module including screws and washers etc complete all as specified and as directed. |
| 184 | S&F modular cover plate 3 module including screws and washers etc complete all as specified and as directed. |
| 185 | S&F modular cover plate 6 module including screws and washers etc complete all as specified and as directed. |
| 186 | S&F modular cover plate 8 module including screws and washers etc complete all as specified and as directed. |
| 187 | S & F Metal flush box 2 module complete all as specified and directed. |
| 188 | S & F Metal flush box 3 module complete all as specified and directed. |
| 189 | S & F Metal flush box 6 module complete all as specified and directed. |
| 190 | S & F Metal flush box 8 module complete all as specified and directed |
| 191 | S&F modular fan regulator, 2 Module 4 step upto 120 W heavy duty 230 volts complete all as specified and as directed. |
| 192 | S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 193 | S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed |
| 194 | Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade,rust & shock proof ABS outer body, non-ferrous pressure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces and connection pipe for hot and cold water supply 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed. |
| 195 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm and provision of 3 core flexible multistranded copper conductorof size 0.75 Sqmm from ceiling rose to fan all as specified and directed. |
| 196 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral,240 Volt with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators complete all as specified and directed by Engr-in-Charge. (Note : MCBs will be Measured separately) |
| 197 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 198 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 199 | Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 20 watt min 120 LM/watt, cool white (6500k), with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification of the Standard/Specification complete all as specified and as directed. |
| 200 | S & F sheet metal enclosure MCB DB TPN 4 Way type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 201 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN, 63 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 202 | Supply & fix in replacement LED Security Light Luminaire 35 watt with 2500 or more lumen warm white/cool day light with, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole/wall fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and as directed. |
| 203 | Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge |
| 204 | Hanging only ceiling fan/exhaust fan and connecting up including provision of flexible cable from ceiling rose or connector to fan Including hook and clamps with nut ,bolts, washers etc complete all as specified and directed |
| 205 | M & L for painting of ceilling fan/exhaust fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting , complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as specified and directed. |
| 206 | Taking down of geyser of any type and any capacity and refixing of the same on an old location with complete fittings such as cold and hot water connection pipes and accessories all as specified by Engr-in-charge |
| 207 | M/L for GI tubing medium grade with all fittings laid in trenches/wall for bore of pipe of following sizes completed all as specified and directed. |
| 208 | 25 mm dia bore |
| 209 | 20 mm dia bore |
| 210 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge. |
| 211 | M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge. |
| 212 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground water pipe line/laying cables complete with all accessories all as specified and directed by Engineer-in-charge. |
| 213 | Supply & Laying 40 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement |
| 214 | Supply, laying, testing and commisioning of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium multistarended stranded conductor, Armoured confirming to IS - 7098 Part-I (1988) with latest ammendments of sizes 16 Sq mm 4 core Cable complete all as spcified and directed. |
| 215 | Supply, laying, testing and commisioning of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium multistarended stranded conductor, Armoured confirming to IS - 7098 Part-I (1988) with latest ammendments of sizes 25 Sq mm 4 core Cable complete all as spcified and directed. |
| 216 | Supply and fixing of GI pipe light grade 40mm bore for cable protection complete all as spcified and directed. |
| 217 | M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping of poles etc including necessary form work complete all as specified. |
| 218 | M & L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation of poles etc complete all as specified and directed |
| 219 | Supply & Errcting truelly vertical position steel tubular swaged poles complete with CI base plate, finial taper plug bolts, nuts & screws 9.0 mtr long type 410 SP-31 including painting of poles with 2 coats of approved aluminium paint over a coat of red oxide, making five strips of black and white paint from PCC of size 30cm thick, numbering of pole with black or white colour by means of stencils and including taking down old unserviceable Lt poleany size and type all as specified and directed by Engg-in-Charge. |
| 220 | Material and labour LED Street lighting 90W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 90W LED 6000K complete all as spcified and directed. |
| 221 | Supply and fixing multi core round PVC insulated aluminium conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 2.5 Sqmm, 3 core from junction box /overhead conductor to street light inside/outside pole complete all as specified. |
| 222 | Supply and fixing thermoplastic polystyrene/ polycarbonate enclosure shock proof, IP 65 (weather proof) rust proof, dust proof, water proof, internally embedde gasket with provision for all side cable entry throught gland(IP-65) and /or gromments (IP-55) size of enclosure (250x 180 x 110mm ) with suitable connectors for / 3 phse loop in loop out and branch out vibration proof connections and fixing on PCC / Steel poles with 25 x 3 mm thich 02 Nos of clamp with nuts bolts and washers and proper thimbling complete all as spcified and directed. |
| 223 | M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length fo drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. |
| 224 | Schedule of credit amount of Rs 17,529.65 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender