Tender For Improvement To Navyug School, Pandara Park Under Education Wing.Sh:- Redevelopment Of Existing Infrastructure, Construction Of Additional Classrooms And Multipurpose Hall At Navyug School, Pandara Park (Composite Work).
Tender Value
11.68 Crore
Estimated cost
Bid Submission
03 Nov 2026
2 days left
EMD
21.68 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Navyug School, Pandara Park Under Education Wing.Sh:- Redevelopment Of Existing Infrastructure, Construction Of Additional Classrooms And Multipurpose Hall At Navyug School, Pandara Park (Composite Work).
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work- ADemolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet. |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 5 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 7 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 8 | Dismantling waterproofing membrane ( fixed with hot bitumen tack coat ) & surface shall be cleaned properly from any part of membrane or tack coat and disposal of unserviceable material lead upto 50 metre all complete as per direction and entire satisfication of engineer-in-charge. |
| 9 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size) up to floor II level all complete as per direction and entire satisfication of Engineer-in-charge. |
| 10 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe. |
| 11 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall |
| 12 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore. |
| 13 | Dismantling old plaster/Grit Wash Plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 14 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. |
| 15 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 16 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-incharge. |
| 17 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 20 | Providing and fixing stainless steel ( Grade 304) railing/grills/jaali made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing/grills/jaali with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, as and where required as per site requirment with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 21 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 22 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 23 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 24 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 25 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 26 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 27 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :20 mm dia nominal bore. |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall25 mm dia nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 30 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms. |
| 31 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20 mm nominal bore, weighing not less than 40 gms. |
| 32 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. |
| 33 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of tiles (300x600mm) |
| 35 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 85 mm |
| 36 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimumframe density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 125 mm |
| 37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).35 mm thick |
| 38 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board constructionwith frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 39 | Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick |
| 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 41 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 42 | Providing and fixing 6mm thick toughened glass (clear/float glass) of approved brand and manufacture (Saint-Gobain / ModiGuard / Asahi or equivalent) conforming to IS 2553 (Part 1), in aluminium partitions, windows, or doors with EPDM rubber gaskets, CPVC/PVC beads, including machine edge polishing, cutting, drilling holes where required, making layout, scaffolding, lifting, and fixing in position at all levels complete as per directions of Engineer-in-Charge |
| 43 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 44 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 majufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA). |
| 45 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 47 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 48 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 49 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 1 5° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 50 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red. Area of slab over 0.50 sqm |
| 51 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°. 110 mm bend. |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain). 110 mm Shoe. |
| 54 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 55 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand). |
| 56 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand). |
| 57 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests. |
| 59 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 60 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 61 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 62 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 63 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia. |
| 64 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 65 | Providing and fixing toilet paper holder : C.P. brass |
| 66 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 67 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe |
| 68 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe |
| 69 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast ron S&S as per IS - 1729 |
| 70 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 71 | Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 1729 |
| 72 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm |
| 73 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :100 mm |
| 74 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe. |
| 75 | Providing and fixing uplasticised PVC connection pipe with brass union: 30 cm length: 15 mm nominal bore. |
| 76 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 77 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. |
| 78 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. |
| 79 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 80 | Providing and fixing Stainless Steel Floor Drain Cockroach Jali for Bathrooms, Wash Basin, Washing Machine, Toilet, Open Area, Kitchen Sinks etc. all complete as per direction and entire satisfaction of Engineer -in -charge. |
| 81 | Providing and fixing soap dispenser with metallic bottle of Kohlar/Jaquar/Roca make or equivalent make etc. all complete as per direction and entire satisfaction of Engineer-in-charge. |
| 82 | Providing and fixing oval shape under counter wash basin of approved make, including fitting, cutting and making good the walls wherever require: snow white colour oval shape Wash basin size 560 x 410 mm. |
| 83 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet. Sand Cast Iron S&S as per IS: 1729. |
| 84 | Providing and fixing C.P. Brass Angle valve with wall flange of Kohlar/Jaquar/Roca make or equivalent make etc. all complete as per direction and entire satisfaction of Engineer-in-charge. |
| 85 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600x1200 mm |
| 86 | Providing and fixing at all height wall panelling plain ans smooth surface with with WPC material of required colour, pattern, size, thickness and colour as per direction and entire satisfaction of Engineer-in-charge including providing and fixing to frame work hardwood plugs/fastners including cutting brick work and fixing in cement mortar and making good the wall etc. and selaing the junctions with or without beading (non exposed) with iron screws or any other means all complete as per direction of Engineer-in-Charge. |
| 87 | Providing and fixing Glazed/matt finished vitrified wall tiles of size 600x1200mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 88 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. |
| 89 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 90 | Providing and Fixing MS sheet cupboard shutter with frame/ chowkhat Godrej style/ design using 18 gauge sheet in all work minimum width of chowkhat 100 mm and required depth including cost of fixing with teak wood plugs of size 50x50x50 mm in cement concrete 1: 3: 6(1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) or rawl plugs locking arrangements with Harrison, plaza or equivalent make almirah spray painting of required shade complete upto entire satisfaction of engineer in charge ( only front face shall be measured for the payment purpose). |
| 91 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles. |
| 92 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 93 | Providing and laying 4 mm thick WPC (Wood Plastic Composite) flooring / WPC vinyl plank flooring with wear layer, laid over smooth cement concrete / existing floor, using approved adhesive / click locking system, including surface preparation, cutting, wastage, skirting (if required), making joints uniform, cleaning the surface, all complete as per and directions and entire satisfaction of Engineer-in-Charge (Nothing shall be paid extra for completion of the work). |
| 94 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 95 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 96 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 97 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 98 | Wall painting with premium acrylic emulsion paint of interior grade, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 99 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 100 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 101 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil |
| 102 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kind of Soil |
| 103 | Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 104 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).Depth not exceeding 1.5 m |
| 105 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m |
| 106 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 107 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 11 0% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum. |
| 108 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 11 0% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum. |
| 109 | Providing, supplying, erecting and fixing factory insulated PUF (Polyurethane Foam) sandwich panels of 100 mm thickness, having rigid PUF core of density 40 ± 2 kg/m³, sandwiched between pre-painted galvanized steel sheets, minimum 0.50 mm thick outer sheet and 0.40 mm thick inner sheet, with tongue and groove / cam-lock arrangement, including self-drilling fasteners, EPDм washers, sealants, flashings, cutting, drilling, hoisting, handling, alignment, joint sealing and making panels watertight, complete in all respects as per approved drawings As directions and entire satisfaction of Engineer -in-Charge. |
| 110 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :North light curves. |
| 111 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 112 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. |
| 113 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 114 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 115 | Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases. |
| 116 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 117 | Providing and supplying of acoustic fabric panelling with square edges made of fiber glass substrate of minimum 25mm thickness wrapped on the front side with an acoustically transparent and classified for Fire reaction of minimum Class B-s1, d1 as per EN13501, fabric with approved combination of colour, size. The fabric panelling shall be having a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers/aluminium section, studs, accessories as recommended by manufacturer along with 2mm thick pvc sheet on existing brick/rcc walls complete in all aspects including the cost of taxes, wastage, labor profits, scaffolding etc. The work should be executed in proper level, alignment, plumb and neatly. Any cutting for accommodation of sockets, switches etc. shall be made by contractor free of cost. The fabric wall panelling shall be covered in suitable protective poly sheets till the handing over to prevent any damage, dusts etc. After award of work, contractor shall provide a sample of fabric acoustics showing colour combinations for approval before implementation at site. The fabric wall panelling shall be consisting of combinations of 2-3 or more colours as per approved pattern, colours, sizes etc. |
| 118 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square. |
| 119 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 120 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. |
| 121 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 122 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 123 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 124 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 125 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 126 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With Sewer bricks conforming to IS : 4885. |
| 127 | Extra for depth for manholes : Size 90x80 cm.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 128 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe. |
| 129 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia |
| 130 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%). |
| 131 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 132 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 133 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar. |
| 134 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 250 to 300 mm diameter. |
| 135 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 136 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 137 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm. |
| 138 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm. |
| 139 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm. |
| 140 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 141 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 142 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 143 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 144 | (Providing and laying 36 mm thick (average) EPDM rubber flooring, comprising 30 mm black SBR granules base layer and 6 mm colored EPDM top layer, laid over prepared surface with PU binder, complete with smooth, anti-skid, UV-resistant finish, including all materials, labour, and certifications, complete in all respects.) |
| 145 | Providing And Fixing Air Walker With Below Specifications:- Dimensions (Lxwxh) 1100x550x1480mm, Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. ‘U’ Shaped Main Frame Of Nb 65mm (G.I) ‘C’ Class Pipe. All Other Pipes Of Nb 32mm (G.I) ‘C’ Class. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres), All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Foothold Made Of Nylon Alloy With Rounded Edges To Prevent Impact And Injury. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Are Fitted With Inbuilt Limiters To Prevent Unwanted Movements. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 178012. Iso 180013. Iso 27001:20134. Iso 50001:20185. Iso 13485:20166. Iso 45001:20187. Iso 14001:20158. Iso 9001:20159. Iso 14001:2004 10. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp, 27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report In The Name Of Both.1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14.Test Report Of Gi Pipe 25 Mm Nb |
| 146 | Providing And Fixing Air Swing In Pairwith Below Specifications: - Dimensions (Lxwxh): 1150x900x1250mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Main Frame Of Nb 50mm (G.I) ‘C’ Class Pipe. Handle Support Frame Of Nb 40mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. 8. Handle Bars Are Provided With High End Quality Rubber Grips. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Foothold Made Of Nylon Alloy With Rounded Edges To Prevent Impact And Injury. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Are Fitted With Inbuilt Limiters To Prevent Unwanted Movements. The Equipment Is Fixed On GroundWith Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With The Approved Standards Certified By AndCertificates Are Mandatory Requires In The Name Of Both Tenders Act As Bidder And Manufacturer.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:2018, 5. Iso 13485:20166. Iso 45001:20187. Iso 14001:20158. Iso 9001:20159. Iso 14001:200410. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:2015, 14. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report 1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 147 | Providing And Fixing Leg Press In A Pair With Below Specifications: - Dimensions (Lxwxh): 1750x550x1600mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Main Frame Of Nb 50mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., InternalDiameter Of Pipe In Millimetres). All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Foothold Made Of Nb 50mm (G.I) ‘C’ Class Pipe. Seat To Be Made Up From Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness,Coloured, Uv Resistant And Environmental Friendly. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Are Fitted With Inbuilt Limiters To Prevent Unwanted Movements. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M -25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used ForAssembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App.Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:2018, 5. Iso 13485:20166. Iso 45001:2018 7. Iso 14001:20158. Iso 9001:20159. Iso 14001:200410. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report In The Name Of Both Tenderer Act As Bidder And Manufacturer.1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 148 | Providing And Fixing Arm Wheel In A Pair With Below Specifications: - Dimensions (Lxwxh): 850x800x1800mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Main Frame Of Nb 32mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Seat To Be Made Up From Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness,Coloured, Uv Resistant And Environmental Friendly. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:20185. Iso 13485:20166. Iso 45001:20187. Iso 14001:20158. Iso 9001:20159. Iso 14001:2004 10. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report In The Name Of Both Tenderer Act As Bidder And Manufacturer.1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 149 | Providing And Fixing Double Cross Walker With Below Specifications:- Dimensions (Lxwxh): 1600x600x1600mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Handle Frame Of Nb 32mm And 25mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). Foot Support Frame Of 100x50x2.5mm Crc Rectangular Pipe. All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Foothold Made Of Nb 50mm (G.I) ‘C’ Class Pipe. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And SelfLubricated Are Used In The Equipment Manufactured. The Equipment Are Fitted With Inbuilt Limiters To Prevent Unwanted Movements. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With. 1. Is 178012. Iso 180013. Iso 27001:20134. Iso 50001:20185. Iso 13485:20166. Iso 45001:20187. Iso 14001:20158. Iso 9001:20159. Iso 14001:200410. Iso 9001:200811. En 14904, 12. En-1176-1-2017, 13. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 150 | Providing And Fixing Triple Twister With Below Specifications: - Dimensions (Lxwxh):1700x1300x1300mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Main Frame Of Nb 32mm (G.I) ‘C’ Class Pipe. Handle Frame Support Of Nb 32mm (G.I) ‘C’ Class Pipe. (‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). Foothold Plate Of Made Of Cost Iron Of 12mm Thickness. All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. MaintenanceFree Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And Expansion Bolts. Once The Concrete Is Set, The Equipment Is Fixed On To It. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:2018, 5. Iso 13485:20166. Iso 45001:20187. Iso 14001:20158. Iso 9001:20159. Iso 14001:200410. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report In The Name Of Both Tenderer Act As Bidder And Manufacturer.1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 151 | Providing And Fixing Rowing Machine With Below Specifications:- Dimensions (Lxwxh): 1280x800x1150mm. Fabricated With Main Post Of Nb 100mm (G.I) ‘C’ Class Pipe Of Approved Make. Main Frame Of Nb 65mm (G.I) ‘C’ Class Pipe. Handle Support Frame Of Nb 25mm (G.I) ‘C’ Class Pipe.(‘Nb’ Stands For Nominal Bore I.E., Internal Diameter Of Pipe In Millimetres). All Pipes Are Powder Coated With 80-120 Micron Thick Akzo Nobel Or Equivalent Paints. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. Base Plate Cover Made Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Uv Resistant And Coloured. Foothold Made Of Nb 65mm (G.I) ‘C’ Class Pipe. Seat To Be Made Up From Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00mm Thickness, Coloured, Uv Resistant And Environmental Friendly. Maintenance Free Bearings Of Skf Or Equivalent Make Duly Oil Sealed And Self-Lubricated Are Used In The Equipment Manufactured. The Equipment Are Fitted With Inbuilt Limiters To Prevent Unwanted Movements. The Equipment Is Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shaped Welded Bolts Of 18mm Thickness. Once The Concrete Is Set, The Equipment Is Fixed On To It And Nuts And Bolts Are Covered With Base Plate Cover. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:2018, 5. Iso 13485:2016, 6. Iso 45001:2018, 7. Iso 14001:2015, 8. Iso 9001:2015, 9. Iso 14001:2004, 10. Iso 9001:2008, 11. En 14904, 12. En-1176-1-2017, 13. En 16630:2015, 14. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompanied With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test Report In The Name Of Both Tenderer Act As Bidder And Manufacturer.1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 152 | Providing And Fixing Exercising Bar With Below Specifications:- Providing Designing And Fixing Of Exercising Bar In Pair Of Size 1800x550x1700 Mm Fabricated With Main Post Of 114 Mm Dia And 2.5 mm Thick And Rest Of The Pipe 40mm Dia And2.5mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handles Bars Are To Be Provided With High Quality Grip Rubber At Top End. Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic As 8mm, Colourful And Uv Resistant AndEnvironmental Friendly. All Open Ends Of Pipe To Be Closed By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix TheEquipment On To It And Cover With The Base Plate. Barcode On Machine To Show The Proper Use Of Machine. Workout Card & Diet Card Should Be Show In App. Customer Can Book His Assesment From His Location. All Must Be Compatible In Ios And Android For Book The Slot And Tickets Equipment Must Be Made And Confirms With.1. Is 17801, 2. Iso 18001, 3. Iso 27001:2013, 4. Iso 50001:2018, 5. Iso 13485:20166. Iso 45001:2018, 7. Iso 14001:2015, 8. Iso 9001:2015, 9. Iso 14001:200410. Iso 9001:200811. En 1490412. En-1176-1-201713. En 16630:201514. En 1663015. En 95716. En 9100:201617. En 11630:201718. Gs19. Din 18032.220. Din 79000-201221. Ce Certificate22. Ce 1199323. Ohsas 18001:201724. Slbr 6225. Bifma26. Gmp27. RohsThe Equipment Must Accompained With Test Report For Quality, Safety, Durability And Proper Functioning Of Equipment Must Mandatory Requires Test 1. Test Report Of Ss Nut & Bolts2. Test Report Of Lldpe Base Caps For Open Gym3. Test Report Of Powder Coating Pipe4. Test Report Of Skf Bearing No. 6007-2z5. Test Report Of Frp/Plastic (Fiber Pad)6. Test Report Of Welding Pipe (Robotic Mig Welding)7. Test Report Of Mek Solvent8. Test Report Of Neutrul Salt Spray Test9. Test Report Of Breaking Load Of Welding Pipe10. Test Report Of Gi Pipe 100 Mm Nb11. Test Report Of Gi Pipe 80 Mm Nb12. Test Report Of Gi Pipe 50 Mm Nb 13. Test Report Of Gi Pipe 32 Mm Nb14. Test Report Of Gi Pipe 25 Mm Nb |
| 153 | Providing and fixing hilti Anchor Road 12mm dia x 220mm along with chemical rebar RE500V3 by drilling suitable holes in reinforced concrete with power driven drill machine to a minimum depth of 200mm in RCC beams, lintels, columns and slabs. All complete as per direction of Engineer-in-Charge. Upto and including 12mm dia. |
| 154 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia. |
| 155 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 manufactured sand upto 100%) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and directed by Engineer-in- charge: Flamed finished granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 156 | Exta for granite stone, half round nosing , including cutting pasting with adhessive of granite strip 30mm wide and 18mm thick complete in all respect to the entire satisfaction of engineer in charge. |
| 157 | Providing & laying high Density polyethylene (HDPE) Pipe with approved ISI make including socket , jointing with rubber gasket, adhessive etc. complete , laying of pipe in required slope including testing of joints etc. complete in all respect to the entire satisfaction of Engineer in charge (a) 200 mm dia |
| 158 | Providing and fixing any Color square panel in size 1200X1200X40 mm thickness or as required , easily demountable, manufactured from High density glass wool with acoustical painted surface on both the sides. Edges are straight cut and painted. Humidity Resistance -Permanent ambient RH upto 95% at 30 * C without sagging , warping or delaminating (EN 13964:2014). Fire Safety-Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501 -1 -European Standard. Light Reflectance - 85% light reflectance Indoor Health & Well-being -Complying with the French regulation on VOC emissions, A+ level.Certified by the Finnish Building Information Group (RTS) with the M1 label. Free from Substances of Very High Concern (SVHC) above 100 ppm as defined by the European REACH regulation (No1907/2006). Product Certified under GRIHA Council of India for Green ratings. Environmental Product declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Re-cycled content of more than 70% CE marking -CE-marked according to the harmonised standard EN 13964:2014 Maintenance - Daily dusting & vacuum cleaning, weekly wet cleaning. The height & level of the panels can be adjusted using the bottom end cable adjusters. Make: Armstrong, Credence, Ecophon or equivalent approved by engineer in charge. |
| 159 | Providing and fixing Roller blinds/Zebra blinds/Honeycell blinds/wood blinds of approved shade, size and texture including fixing all necessary accessories etc Complele in all respect as per design approved by the Engineer in charge.. (Make: Ddecor, Vista, MAC or equivalent approved by engineer in charge). |
| 160 | Providing and Fixing Writing Board 4'-0\\" x 4'-0\\" including all necessary fixing etc all complete as per direction and instruction of the Engineer-in charge. |
| 161 | Supply and fixing sticker type signage at site in proper line & level. The signage logo or letters (Hindi & English) shall be made with premium quality vinyl sheet of approved colour, pasted on “3M”make self-adhesive film of approved colour, including supply of all material labour etc. required for proper completion of work. Before making the signage text & font of letters in best fit size will be set in computer so as to give aesthetic look. Actual size will be as per text setting in the computer. Complele in all respect as per the direction of Engineer in charge. |
| 162 | Providing and Fixing C.P. brass Ablution health faucet assembly with 1.0 m long braided PVC hose with mounting bracket fixed on wall etc all complete as per direction of the engineer in charge (Make: Jaquar ALD-565, euronics EHF01-CP, TOTO THX20MCRB) or equivalent approved by engineer in charge |
| 163 | Providing and fixing Curved shaped urinal partition with 8mm thick frosted glass Urinal partition size 450 mm x 900 mm etc all complete as per direction of the engineer in charge. Make: Jaquar JSE-CHR-810UC450X, Euronics, or equivalent approved by engineer in charge. |
| 164 | Disposal of building rubbish/malba or similar unserviceable, dismantled, or waste materials by mechanical means, including loading, transportation, and unloading at any authorized C&D (Construction and Demolition) waste management site within a 25 km lead (e.g., Shastri Park, Burari, Mundka), including weighing at the plant, etc., complete as per the directions of the Engineer-in-Charge.Weighing and unloading at the plant shall be carried out as per the procedures/rules of the respective C&D waste management facility. The processing fee for C&D waste disposal, as per the prescribed rates, shall be deposited by the agency and will be reimbursed by the department upon submission of original cash receipts only. |
| 165 | Disposal of Surplus earth / similar materials by mechanical means, including loading, transporting, unloading the same at any Suitable site within 20 Kms. Lead etc. complete as per direction of Engineer-In-Charge. The rates will be applicable to net quantites after deduction of prescribed percentage for voids mentioned in the specification under subhead \\"Carriage of Materials\\".(A) Surplus earth upto 1 Kilometre lead |
| 166 | (B) Surplus earth upto 2KM TO 5 KM lead |
| 167 | .(C) Surplus earth upto 5KM TO 10KM lead |
| 168 | (D) Surplus earth upto 10 KM TO 20 KM lead |
| 169 | Deduct for not using 20 mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 170 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. |
| 171 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 172 | Melamine polishing on wood work (one or more coat). |
| 173 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay: cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10. |
| 174 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand. |
| 175 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.Dismantled M S Steel. |
| 176 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.Door including chowkhat below 2.50 sqm. |
| 177 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.Bricks |
| 178 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.Bricks tile |
| 179 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.Spun Cast Iron (SCI) pipes |
| 180 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge. G.I. Pipe |
| 181 | The dismantled material shall be taken away by the contractor on 'as-is-where-is' basis. Carriage and handling of such material shall be borne by the contractor at his own cost. The cost of such dismantled material shall be recovered from the contractor’s bill or shall be deposited by the contractor with the department, as decided by the Engineer-in-Charge.PVC Tank |
| 182 | Providing and fixing Right and Left hand side casement locking handle for Aluminium window of size 153mmX48mmX69mm and colour powder coated of approved brand all complete as per direction and entire satisfaction of Engineer in Charge. |
| 183 | Electric Work - (B)Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group CFan point- 26 NosLight point- 70NosEx fan point- 5NosCall ball- 02 Nos |
| 184 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 185 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.1. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 186 | 2. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 187 | 3. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 188 | 4. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire. |
| 189 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 190 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 pair |
| 191 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as requiredTelephone socket outlet |
| 192 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 193 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required2 run of cable |
| 194 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 195 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 196 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 197 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\"curve including connections, painting etc. as required. |
| 198 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way Double Door |
| 199 | 12 way Double Door |
| 200 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door |
| 201 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 202 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amp |
| 203 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100amp |
| 204 | Supply of 34 watt 2X2 LED square surface ceiling light panel color temp 6000K cool day light 50 Hz 230V make Syska/Philips / Osram or equivalent |
| 205 | Supply and fixing of LED tube light fittings batten type 20 watt,4 feet cool white, 6500 K, CRI ≥ 70,240 V, 50 HZ, Guarantee/Warrantee:- Two years Make: philips/wipro/Syska/panasonic/ Havell's/ Crompton or Equivalen. |
| 206 | SITC of exhaust fan double ball bearing heavy duty,12 inch 3/4 blades sets down double ball bearing and motor should be copper winding performs well at low voltage, 1400 RPM , 230v/50 Hz, Grey colors. Warranty 02 years from the date of supply Make;- Havell's/ Crompton/ Usha or equivalent. |
| 207 | SITC of BLDC Ceiling fan 48\\" (1200 MM) sweep BEE 5 Star rated 3 nos blades 30 cm long down rod 2nos canopies shackle kit, safety rope copper winding power factor notr less than0.9service value min 6.85 air delivery min 215 CMM 350 RPM THD less than 10%remote or electronic regulator unit speed control suitable for 230V 50 HZ single phase AC supply, earthing etc. Complete as required Make:- Orient/ Havell's/Crompton/Usha or equivalent |
| 208 | Supply of wall mounted fan of speed 1280 rpm,400 mm sweep , 3 blades, speed setting, suitable for single phase 230 volts,50 hz with 2 years warranty ,Make: Philips/Havell's Crompton or equivalent. |
| 209 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 210 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required |
| 211 | Supply and laying 6 SWG GI wire at 0.50 mtr below ground level for conductor earth electrode including connection/termination with GI thimble etc as required |
| 212 | Part-B (CCTV) Supply, Installation, Testing and Commissioning of 2MP IR Vandal Proof IP Dome N/W Camera, 1 / 2.8\\" Progressive scan CMOS, 2.8mm, 30M IR, Micro SD card slot up to 256 GB, DC12V/PoE, IP67/IK10, 1920 x 1080 @30FPS, min 0.002 Lux @ F1.2 color view & 0 lux for B/W with IR on, shutter time is 1/100000s~1s,AGC ON; Defog, EIS, True day/night, 120db True WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Basic intelligent video analytics including Region Entrance/ Region Exiting/ Advanced Motion Detection/ Tamper Detection/ Line Crossing/ Loitering/ Object Left/ Object Removed, Should support H.265+/H.265/H.264+/H.264/MJPEG, ONVIF compliant profile S,G & CGI standard. CE, FCC, EN, BIS approved including mounting accessories complete as required.Make: Axis, Pelco(Sarix Enhanced Series), GVD |
| 213 | Supply, Installation, Testing and Commissioning of 2MP IP Motorized IR Bullet N/W Camera, 1 / 2.8\\" Progressive scan CMOS, 2.7-13.5mm, 50M IR, Micro SD card slot up to 256 GB, DC12V/PoE, IP67/IK10, 1920 x 1080 @60FPS, min 0.002 Lux @ F1.2 color view & 0 lux for B/W with IR on, shutter time is 1/100000s~1s, AGC ON; Defog, EIS, True day/night, 120db True WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Basic intelligent video analytics including Region Entrance/ Region Exiting/ Advanced Motion Detection/ Tamper Detection/ Line Crossing/ Loitering/ Object Left/ Object Removed/Human detection/ People counting, Should support H.265+/H.265/H.264+/H.264/MJPEG, ONVIF compliant profile S,G, CGI standard. CE, FCC, EN, BIS approved including mounting accessories complete as required.Make: Axis, Pelco(Sarix Enhanced Series), GVD |
| 214 | 8MP(4K)3840*2160, 4*8MP 6*5MP 8*4MP 16*1080P 32*720P, RAID 0/1/5/6/10, 8*10TB, 2 HDMI, 2 VGA, 2*RJ45 100M/1000M1*RCA Audio input, 2*RCA Audio output, 1*eSATA interface, 1*RS-485 Series Port for PTZ 1*RS-232 Series Port for Console 1*RS-485 Series Port for Keyboard 1*USB 3.0 interfaces, 2*USB 2.0 interfaces, Video Compression H.265+/H.265(HEVC)/H.264+/H.264, Advanced Function ANR, N+1 Hot Spare, Working Conditions Temperature: -10℃~55℃/Humidity: 10%~90%Make: Axis, Pelco(Sarix Enhanced Series), GVD |
| 215 | - A central management system for Octocam Cameras and NVRs User-friendly UI design - Support alarm pop-up window - Support multiple monitors - Support 1/4/8/9/16/36/64 channels playing synchronously - Support the custom live view layout - Support alarm screen for displaying the alarm channel - Support full screen for single or multiple channels - Support H.265/H.264 Video Compression - Support dual-stream - Support PT control and digital zoom - Support SD card and HDD recording files playback - Support motion detection, alarm recording and image capture functions - Support VCA functions - Support iOS and Android handheld deviceMinimum hardware Required:MAC & Windows 10/8/7/Vista SP2/Server 2012/Server 2008/Server 2003, CPU: 2.6GHZ or faster, Memory: 8GB or moreGraphic memory: 1GB or moreMake: Axis, Pelco (Sarix Enhanced Series), GVD |
| 216 | Part- C AUDIO VIDEO Supply Installation Testing & Commissioning of Horn Loaded three way full range cabinet with a continuous power handling of 600 watt in a compact, two - way BIAMPED design. It features a custom built 2X12\\" (300mm) low frequency driver, 8\\" MF using a 50 mm voice coil and a 1\\" exit compression driver having 44 mm voice coil mounted on a constant directivity 40\\"X40\\" horn. At 4 ohm and a sensitivity of 101/109 DB.With a frequencyresponse to be 75hz---20khz.The cabinet has flying hardware mounted on the sides and behind the cabnet. Constructed from a 15/24 mm Baltic multilaminate Birch it is covered in a highly weather resistant paint, protected by a sturdy 16 gauge steel grille.Approved Make : CSC Audio, KV2, VOID |
| 217 | Supply Installation Testing & Commissioning of Horn Loaded three way full range cabinet with a continuous power handling of 600 watt in a compact, two - way BIAMPED design. It features a custom built 2X12\\" (300mm) low frequency driver, 8\\" MF using a 50 mm voice coil and a 1\\" exit compression driver having 44 mm voice coil mounted on a constant directivity 40\\"X60\\" horn. At 4 ohm and a sensitivity of 101/109 DB.With a frequencyresponse to be 75hz---20khz.The cabinet has flying hardware mounted on the sides and behind the cabnet. Constructed from a 15/24 mmBaltic multilaminate Birch it is covered in a highly weather resistant paint, protected by a sturdy 16 gauge steel grille.Approved Make : CSC Audio, KV2, VOID |
| 218 | Supply Installation Testing & Commissioning of Horn Loaded three way full range cabinet with a continuous power handling of 600 watt in a compact, two - way BIAMPED design. It features a custom built 2X12\\" (300mm) low frequency driver, 8\\" MF using a 50 mm voice coil and a 1\\" exit compression driver having 44 mm voice coil mounted on a constant directivity 40\\"X90\\" horn. At 4 ohm and a sensitivity of 101/109 DB.With a frequencyresponse to be 75hz---20khz.The cabinet has flying hardware mounted on the sides and behind the cabnet. Constructed from a 15/24 mmBaltic multilaminate Birch it is covered in a highly weather resistant paint, protected by a sturdy 16 gauge steel grille.Approved Make : CSC Audio, KV2, VOID |
| 219 | SITC of main PA powerful, versatile, passively crossed-over two-way wide dispersion mid-high cabinet designed to provide exceptional sound reinforcement. Frequency Response : 75 Hz-19.5 kHz ± 3 dB, Drivers : LF: 2X8\\" (300 mm) with a 2\\" (77 mm) voice coil, HF: 1\\" (25 mm) compression driver with a 1.75\\" (44 mm) voice coil, Recommended Amplifier Upto : 1200/400 Watts, Nominal Impedance : 4/8 Ohms and 16/8Ohms, Dimensions - Product: (W) 540 mm x (H) 400 mm x (D) 350 mm, Peak Power : 2000 / 400 Watts Approved Make : CSC Audio, KV2,VOID |
| 220 | Supply Installation Testing & Commissioning of 1x8\\" Two Way Passive Full Range Speaker Full range cabinet with a continuous power handling of 150 watts in a compact two-way passive full range enclosure loaded with a 8\\" (200 mm) LF/ and a 1\\" compression driver mounted on a 75 x65 horn. With a sensitivity of 94 dB, it has a continuous/Peak SPL of 115/121 dB and a Frequency response to be 80hz - 20 kHz. Depending on the application, the cabinet can be both mounted in horizontal and vertical orientation. Constructed from a 15mm Baltic multi-laminate Birch, protected and covered in a highly weather resistant paint, a sturdy 16 gauge steel grille it has a mounting for a U clamp. Approved Make : CSC, KV2, VOID |
| 221 | Supply Installation Testing & Commissioning of Subwoofer 2 X 18” Long Excursion Horn loaded with a min 4\\" voice coil Frequency Response 35 Hz – 250 Hz. (± 3dB) Sensitivity (SPL 1 W/1 m) min 104 dB. Max SPL 135 dB (continuous) - 141 dB(peak) LF driver 2x18” with 4” sandwich cone voice coil Nominal impedance Passive 4W. Power Handling : 1400 W AES, 2800 W max Integral rigging hardware with angular increment of 2.5 degree. The hardware should be 16 SWG anti kick steel Grill, Cabinets should be made of baltic birch ply. Approved Make : CSC, KV2, VOID |
| 222 | Supply Installation Testing & Commissioning of Linear power Supply AmplifierLinear power supply power amplifier in Class D Topography having a power rating of 4x 750/1200/1200watts/ch @ 8/4/2 ohms with a THD of less than .5% ,Damping fator >1000 with thermal, short circuit and over voltage protection. . Input and Output use XLR and speakon connectors . Bridge, Stereo , Parallel switch. Indicators on the front panel signal/ limit and power/ fault Stable into mismatched loads . Chassis 2.5U Approved Make : CSC Audio, KV2, CREST |
| 223 | Supply Installation Testing & Commissioning of Linear power Supply AmplifierLinear power supply power amplifier in Class D Topography having a power rating of 2x 1000/1700/1700wats/ch @ 8/4/2 ohms with a THD of less than .5% ,Damping fator >1000 with thermal, short circuit and over voltage protection. . Input and Output use XLR and speakon connectors. Bridge, Stereo , Parallel switch. Indicators on the front panel signal/ limit and power/ fault Stable into mismatched loads . Chassis 2.5U Approved Make : CSC Audio, KV2,CREST |
| 224 | Supply Installation Testing & Commissioning of Linear power Supply AmplifierLinear power supply power amplifier in Class D Topography having a power rating of 4x 500/800/800watts/ch @ 8/4/2 ohms with a THD of less than .5% ,Damping fator >1000 ,with thermal, short circuit and over voltage protection. . Input and Output use XLR and speakon connectors . Bridge, Stereo , Parallel switch. Indicators on the front panel signal/ limit and power/ fault Stable into mismatched loads . Chassis 2.5U Approved Make : CSC Audio, KV2,CREST |
| 225 | Supply Installation Testing & Commissioning of Linear power Supply AmplifierLinear power supply power amplifier in Class D Topography having a power rating of 2x 500/800watts/ch @ 8/4/2 ohms with a THD of less than .5% ,Damping fator >1000 with thermal, short circuit and over voltage protection. . Input and Output use XLR and speakon connectors. Bridge, Stereo , Parallel switch. Indicators on the front panel signal/ limit and power/ fault Stable into mismatched loads . Chassis 2.5U Approved Make : CSC Audio, KV2,CREST |
| 226 | Supply Installation Testing & Commissioning of Sound Management ControllerType : Digital controller with 8 in x 12 out Features : Mic/Line Inputs : 12 x Electronically Balanced on Phoenix Combicon Removable Screw ConnectorsNominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps, Input Impedance : 3.5 Kilohms, Maximum Input Level : +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain, CMRR : > 75 dB at 1 kHz, EIN : < -128 dBu Typical with 150-Ohm Source, Outputs : 8 x Electronically Balanced on Phoenix/Combicon Removable Screw Connectors, Frequency Response : 20 Hz to 20 kHz (+0.5 dB / -1 dB), Output Impedance : 40 Ohms Balanced, 20 Ohms Unbalanced, Voltage : Withstanding Voltage: 80 V TO Maximun (Off), Mains Voltage : 100 to 240 VAC, 50/60 Hz Make : CSC, BSS, Meyer |
| 227 | Supply Installation Testing & Commissioning of 32 Channel Digital Audio Mixing Console32 Mono Mic/Line Inputs (TRS + XLR) Recallable AnaLOG IQTM Preamps, 3 Stereo Inputs (TRS) 20 Mix Outputs (XLR), 4 Stereo Groups (switchable to Mix mode), Up to 12 Monitor Mixes , 6 Stereo Matrix Outs, 4 FX Engines, 4 dedicated FX Sends / Returns, 4 Mute Groups, 4 DCA Groups, AES Digital Out, 32×30 USB Audio Interface, dSNAKETM Remote Audio Port, 25 Motor Faders, 800×480 Touchscreen, 10 Soft Keys, Trim, polarity, HPF, gate, insert, 4-band PEQ, compressor, delay on all Inputs, Insert, 4-band PEQ, 1/3 octave GEQ, compressor, delay on all Outputs, Automatic Mic Mixer, Channel Ducker on all inputs, ProFactory Mic Presets, iLive FX Library, Built-in Signal Generator, RTA with Peak Band indication, Spectrogram to aid feedback elimination and room acoustics, High contrast metallic finish controls, matching premium GLD Chrome seriesApproved Make : Allen & Heath, QSC, Yamaha |
| 228 | Supply Installation Testing & Commissioning of Handheld Cordless MicrophoneSimultaneous Channels : 12, Power and battery status LED Adjustable gain control, Quick and easy frequency matching AA batteries (included) provide up to14 hours of continuous use, 300 ft. (100 m) operating range Receiver Adjustable output level, Removable antennas for quick antenna distribution LC display with detailed RF and audio metering Up to 12 compatible systems One touch QuickScan locates the best open frequency Approved Make : Shure, Sennheiser, AKG |
| 229 | Supply Installation Testing & Commissioning of 32 Channel Digital Audio Mixing Console32 Mono Mic/Line Inputs (TRS + XLR) Recallable AnaLOG IQTM Preamps, 3 Stereo Inputs (TRS) 20 Mix Outputs (XLR), 4 Stereo Groups (switchable to Mix mode), Up to 12 Monitor Mixes , 6 Stereo Matrix Outs, 4 FX Engines, 4 dedicated FX Sends / Returns, 4 Mute Groups, 4 DCA Groups, AES Digital Out, 32×30 USB Audio Interface, dSNAKETM Remote Audio Port, 25 Motor Faders, 800×480 Touchscreen, 10 Soft Keys, Trim, polarity, HPF, gate, insert, 4-band PEQ, compressor, delay on all Inputs, Insert, 4-band PEQ, 1/3 octave GEQ, compressor, delay on all Outputs, Automatic Mic Mixer, Channel Ducker on all inputs, ProFactory Mic Presets, iLive FX Library, Built-in Signal Generator, RTA with Peak Band indication, Spectrogram to aid feedback elimination and room acoustics, High contrast metallic finis+B18h controls, matching premium GLD Chrome seriesApproved Make : Allen & Heath, QSC, Yamaha+C18 |
| 230 | Supply Installation Testing & Commissioning of Dynamic Handheld Corded MicrophoneFrequency response tailored for vocals, with brightened midrange and bass roll offUniform cardioid pickup pattern isolates the main sound source and minimizes background noise Pneumatic shock-mount system cuts down handling noisecEffective, built-in spherical wind and pop filtercSupplied with break-resistant stand adapter which rotates 180 degreesccLegendary Shure quality, ruggedness and reliabilitycCardioid (unidirectional) dynamic Frequency response: 50 to 15,000 Hz Replacement cartridge: R59Approved Make : Shure, Sheniezer, AKG |
| 231 | Supply Installation Testing & Commissioning of Instrument MicrophoneProfessional-quality reproduction for drum, percussion, and instrument amplifier miking Uniform cardioid pickup pattern isolates the main sound source while reducing background noise Pneumatic shock-mount system cuts down handling noise Extremely durable under the heaviest use Frequency response: 40 to 15,000 Hz Replacement cartridge: R57 Approved Make : Shure, Sheniezer, AKG |
| 232 | Supply Installation Testing & Commissioning of Podium Cardioid Condenser Microphone with Desktop Base Element type: electret condenser Polar pattern: cardioidFrequency response: 70 - 16,000 Hz Sensitivity: -33 dBV/Pa (22 mV, @1 kHz, 1 Pascal =94 dB SPL) Maximum SPL: 120 dB Dynamic range: 93 dB Signal to noise ratio (@94 dB SPL): 67 dB Common mode rejection: > 45 dB Approved Make : Shure, Sheniezer, AKG |
| 233 | Supply Installation Testing & Commissioning of Microphone Stands Long Collapsible tripod boom stand, Die-cast light weight and steel construction Sleek black finish, Mic clip included Ultra-light for easy transport Approved Make : Hawk, Samson, Framework. |
| 234 | Supply Installation Testing & Commissioning of Microphone Stands Short Perfect for miking kick drums and speaker cabinets Heavy-duty adjustable boom mic stand Die-cast ,light weight and steel construction Mic clip included Approved Make : Hawk, Samson, Frameworks. |
| 235 | Supply Installation Testing & Commissioning of Stereo Active DI BoxOutput noise -100dBu. 20Hz to 20kHz un-weighted, with input terminated by 10k Ω resistorDistortion (THD+N) < 0.01% @ 1 kHz, +4dBu Frequency response +0.5/-1dB 20Hz to 20kHzPower consumption <10mA Approved Make : Behringer, Klark Teknik, Samson. |
| 236 | Supply Installation Testing & Commissioning of 1x12\\" Passive Two Way Full Range Stage Monitor 12\\" 2-way speaker with a a 1.75\\" diaphragm compression driver1000-Watt Class D power module (2 x 500W) Extensive DSP featuring DEEP and Intrinsic Correction enhances system performance DMT (Directivity Matched Transition) ensures uniform coverage across the entire sound field Rugged, texture-painted birch enclosure4-position Mic/Line gain Tour-grade, 16-gauge steel grilles Comfortable ergonomic handles35mm pole sockets with Tilt-Direct M10 rigging points for suspended installationMake : CSC Audio, FBT, QSC |
| 237 | Led wall signage display p4 indoor led wall screen with 16ftx12ft |
| 238 | Video Controller with software(HDMI/USB/CVBS/DVI/VGAMake: |
| 239 | Supply Installation Testing & Commissioning of 4 in 1 out HDMI SwitcherINPUT : 4 HDMI connectors OUTPUT : 1 HDMI connector BANDWIDTH : Supports up to 2.25Gbps bandwidth per graphic channel COMPLIANCE WITH HDMI STANDARD : Supports HDMI and HDCP RESOLUTION : Up to UXGA, 1080p, deep color POWER CONSUMPTION : 100–240V AC, 50/60Hz, 10VA CONTROLS : Front panel buttons, infrared remote control transmitter, RS–232, Ethernet INCLUDED ACCESSORIES: Power cord Approved Make : Kramer, Extron, Key Digital |
| 240 | Supply Installation Testing & Commissioning of Cat 5 to HDMI ExtenderHDMI 1.2a, Cat6 cable 1080p at 60 m (196 ft.) Cat6 cable 480p at 100 m (328 ft.) Power: 5 V DC / 2 A; cable, 1.2 m (4 ft.) HDMI female (input/output) RJ45 female (output/input)Input video signal: 0.5 – 1.0 V p-p Input DDC signal: 5 V p-p (TTL) Maximum single-link range: 1920 x 1200, 1080p Output video: HDMI 1.2a, HDCP 1.0 / 1.1, DVI 1.0 Frequency: 1.65 Gbps / 140 MHzVGA: 640 x 480, 800 x 600, 1024 x 768, 1920 x 1200 DTV/HDTV: 480i/480p/576i/576p/720p/1080i/1080pHDMI Extender (receiver and transmitter modules) Approved Make : Manhattan, Kramer, Milestone |
| 241 | Supply Installation Testing & Commissioning of Flying Locks for Speakers Approved Make: CSC, VOID, KV2 |
| 242 | Supply Installation Testing & Commissioning of Flying Frame for Speakers Approved Make: Custom made |
| 243 | Supply Installation Testing & Commissioning of Clamps for speakers Approved Make: Custom made |
| 244 | Supply Installation Testing & Commissioning of Clamps with Extension for SpeakersApproved Make: Custom made |
| 245 | Supply Installation Testing & Commissioning of Hanging Frame with Extension for Subwoofer, Approved Make: Custom made |
| 246 | Supply Installation Testing & Commissioning of Speakon Connectors Approved Make: Nutrik |
| 247 | Supply Installation Testing & Commissioning of Speakon NL 8 Connectors Approved Make: Nutrik |
| 248 | Supply Installation Testing & Commissioning of XLR Male Connectors Approved Make: Nutrik |
| 249 | Supply Installation Testing & Commissioning of XLR Female Connectors Approved Make: Nutrik |
| 250 | Supply Installation Testing & Commissioning of XLR female Base Connectors Approved Make: Nutrik |
| 251 | Supply Installation Testing & Commissioning of Phono Connectors Approved Make: Nutrik, MX, Samson |
| 252 | Supply Installation Testing & Commissioning of RJ 45 Connectors Approved Make: MX, MK, Samson |
| 253 | Supply Installation Testing & Commissioning of DMX signal Wire 2 core 23/0.2 ATC conductor PVC insulated, over all shielded with copper screening & PVC sheathing Approved Make : Chetan, Belden, CSC |
| 254 | Supply Installation Testing & Commissioning of Speaker cable Stranded 2 X 2.5 sq mm, PVC insulated and soft PVC sheathed copper low loss, low conductance. Approved Make : CSC, Belden, Chetan |
| 255 | Supply Installation Testing & Commissioning of Speaker cable stranded 2 X 4 sq mm, PVC insulated, soft PVC sheathed low loss copper conductor with low inductance.cable Approved Make: CSC, Belden, Chetan |
| 256 | Supply Installation Testing & Commissioning of Snake cable 32 pair PVC insulated PVC sheathed copper conductor low loss, low inductance wire for microphone Approved Make: CSC, Belden, Crystal |
| 257 | Supply Installation Testing & Commissioning of shealded twisted 8 core cable Approved Make : CSC, Belden, D link |
| 258 | Supply Installation Testing & Commissioning of HDMI Cable 3 FeetApproved Make : Kramer, Key Digital |
| 259 | Supply Installation Testing & Commissioning of Pop Up Box 6 Module for Microphone Connectivity Slim design for perfect integration into the floor Soft opening for enhanced comfort and safety Equipped with push and slide locking system to avoid accidental opening by feet, To be equipped with Arteor socket outlets For installation use the flush-mounting boxes for concrete floors or the kits for raised access floors or table top6 Modules, Matt aluminium finish Make : Legrand or Equavalent |
| 260 | Supply Installation Testing & Commissioning of Equipment Rack22U, 23” Deep Floor Standing factory made Rack with Glass Front Door and Steel Back Door, The rack should be open able on all 4 sides with a 18 swg doors adequately stiffened and powder coated cabinet. ID Length : 19”, ID Height : 30”, OD Length : 24”, OD Width : 24” Material : 18 gauge steel, Color : Gray, Hinges : MetalWheels : Optional Casters, (2) locking Security Options : Key lockApproved Make : Comrack, Inforack, D-Link |
| 261 | Supply Installation Testing & Commissioning of All Electrical Hardware, Switches, Boxes and Electrical Wires for Control Room etc for audio, video and stage lighting equipments |
| 262 | Part- D LIGHTING Supply of LED batten 4ft, IP20 made of extruded aluminium housing with high efficiency polycarbonate diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=110lumens/watt with Minimum system Lumens 4000 with maximum input power of 36 Watt. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance at 45deg C design ambient temperature, CCT of 6500K (SDCM<5) , CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 VAC. Driver efficiency should be more than 85%. Minimum Internal Surge Protection 3KV. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer. Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete as required. Similar to PHILIPS : BN170C LED40S-6500 PSU L120 OR APPROVED EQUIVALENT. |
| 263 | Supply of Surface LED batten IP20 2ft made of Aluminum extrusion housing with high efficiency polycarbonate diffuser , LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt with Minimum system Lumens 1200 with maximum input power of 10-12 Watt. Life of : 25000 burning Hrs. @ L70, CRI >80, PF >0.9. an operating Voltage Range of 140 - 240 VAC.BIS Certifications of fixture is required & product code should be reflected in the BIS certificate. (PHILIPS : BN021 LED12S-6500 PSU GR OR Approved EQUIVALENT) |
| 264 | Supply of IP20 Recessed LED 600x600mm with only 35mm width fitting made of CRCA with PS diffuser. Fixture should have minimum efficacy at System level (Not Chip Level) >=120lumens/watt and a minimum system lumen output of 3600 lumens and maximum system wattage of 30W. Luminaire should have Life of 50000hrs@L70B50 Lumen maintenance, CCT up to 6500K (SDCM<5), THD<10% at full load, ripple <5%, CRI >80, PF >0.95 and an operating Voltage Range of 140 - 270 Internal Surge Protection 4KV. Luminaire should have SDCM<5. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 - 13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips Models RC380B G6 LED36S-6500 G6 L60W60 PSU OD or approved equivalent |
| 265 | Supply of recessed type DALI dimmable LED downlight with maximum system wattage 40W and minimum system lumen 4000lm. CCT=4000K, CRI>80. Housing made of pressure die cast Aluminium. Specialy design optics made of aluminum reflector with beam angle 36 deg for auditorium purpose. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire shall meet IP20 rating with THD<10% and PF > 0.9. Operating voltage 220-240V , 50/60 Hz .Fixture should be available in DALI dimmable version or compitable with Dali System.Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete as required. Dimensions:- H-142mm, D=193mm and ceiling cut out dia= 175mm. (PHILIPS : RS271B LED40/840 PSD WB WH OR APPROVED EQUIVALENT) |
| 266 | Supply of recessed type DALI dimmable LED downlight with maximum system wattage 20W and minimum system lumen 2000lm. CCT=4000K, CRI>80. Housing made of pressure die cast Aluminium. Specialy design optics made of aluminum reflector with beam angle 36 deg for auditorium purpose. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire shall meet IP20 rating with THD<10% and PF > 0.9. Operating voltage 220-240V , 50/60 Hz .Fixture should be available in DALI dimmable version or compitable with Dali System.Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete as required. Dimensions:- H-113mm, D=143mm and ceiling cut out dia= 125mm. (PHILIPS : RS271B LED20/840 PSD WB WH OR APPROVED EQUIVALENT) |
| 267 | Supply of suitable for general lighting recessed downlighter with 40mm height suitable for general lighting. Luminaire should have die cast heat sink with polycarbonate diffuser. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 1500 lumens and maximum system wattage of 14 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 2.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. (PHILIPS : Green Perform DN296B LED15S OR APPROVED EQUIVALENT.) |
| 268 | Supply of 1 Channel DALI high frequency fluorescent ballasts controller. Each DALI outputs allowing it to control up to 64 DALI devices. The DALI control signals can be programmed to operate in tandem with the One internal switched outputs, which will automatically isolate the power circuit when all associated DALI channels are at 0%. The device is DIN-rail mountable integral DALI bus power supply, removing the need for an additional external device. Supply: 100-240V 50/60Hz Single Phase at 0.5A, Control Outputs: 1 x DALI Control Outputs, each supporting a full DALI universe of 64 channels, including backward channel DALI Bus Power Supply, Internal 15V rated 128mA per universe Mains Outputs :1 x 20 Amp feed through switched circuits for DALI ballast mains supply. Control IO :1 x RS485 DyNet serial port / DMX, 1 x AUX programmable dry contact input. DC supply 12V @ 120 mA Operating Environment : 0˚ to 40˚C ambient temperature, 0% to 90% RH non-condensing Equivalent: Philips Dynalite. DDBC 120 |
| 269 | Supply of Network Power Supply. Power: 15V DC 1.5 Amps regulated power supply, designed to supplement the network DC supply. Supply of 110-240V ±14% 50/60Hz Single Phase at 0.25A The switchmode design allows the device to be used with a wide range of supply voltages without the need for a manual selector setting. Size of six-unit DIN-rail mount enclosure that has a circuit breaker profile. This enables the device to be installed in all types of electrical equipment enclosures, including those with cover apertures specifically designed for circuit breakers. Equivalent: Philips Dynalite DDNP1501 |
| 270 | Supply of 12 Channel relay controller to control any type of switched load. The power circuit is a “feed-through” design and is electrically equivalent to a 12-pole contactor. DIN-rail mountable & each channel is fitted with a hardware override switch which is accessible from the front panel. Control Supply: 100-240V 50/60Hz Single Phase at 0.25A, Outputs: 12 x Switched feed thru outputs at 20A (Resistive) Max total box load 180A. Dc Supply: 12V @ 120mA, Preset Scenes: 170, Operating Environment: 0º to 50ºC ambient temperature, 0% to 95% RH non-condensing Equivalent : Philips Dynalite:DDRC1220FR-GL-V3 |
| 271 | Supply of Push type 8 key User Interface White with White Rim for workstations, break out areas, training rooms etc with Fully programmable options for Indivuidual control / group control / Scene control / Tasks etc. Front cover black with Backlight, built in proximity and Loaded icons like presentation scenario, meeting scenario, master On/ Off, Powersaving mode etc along with a LED indicator for each operations. Custom engraving facility. Operating on 12V-24V DC @ 35-60mA from Dynet network. Equivalent to Philips PDR8E -WWW-X + DACM-V4 |
| 272 | Part- E ( Centralized Airconditioning system ) Supply of Modular Type outdoor units, equipped with Highly Efficient Scroll, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting, Refrigerant temperature controland capacity as mentioned below. VRV/VRF System shall be suitable for working on 48 °C ambient temperature, Refrigerant R 410A. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance etc. as applicable in INR. having the unit shall have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency. The fan static pressure of the outdoor unit shall be more than 75 Pa to avoid hot air recirculation. The PCB Chamber of the outdoor unit should be refrigerant cool Outdoor Units. Make : Hitachi Ductable.a) 20 HP |
| 273 | Indoor units (Nominal capacity) Ductable Units.a) 10 HP |
| 274 | Refrigerant 'Y' Joint Required for distribution of refrigerant in copper piping etc. complete as per specifications. |
| 275 | Lifting Shifting Installation, Testing & Commissioning of air cooled variable refrigerant flow modular type condensing units, each comprising of 100% inverter scroll compressors, full charge of refrigerant gas (R- 410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work in both cooling and Heating mode. The condensing units shall be suitable for operation on 415 ± 10% volts, 50Hz, 3 phase AC power supply and the condensing units shall be of following capacities. Outdoor Units.a) Outdoor Condensing Units 20 HP |
| 276 | Lifting Shifting Installation, Testing & Commissioning of air cooled variable refrigerant flow modular type condensing units, each comprising of 100% inverter scroll compressors, full charge of refrigerant gas (R- 410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work in both cooling and Heating mode. The condensing units shall be suitable for operation on 415 ± 10% volts, 50Hz, 3 phase AC power supply and the condensing units shall be of following capacities. Indoor Units.a) Ductable Units 10 HP |
| 277 | Commissioning of VRF system including topping R-410A gas as per site requirements. |
| 278 | Supply, Installation, Testing & Commissioning of highpressure copper refrigerant piping suitable for R 410a refrigerant of following size as required and duly insulated with 19mm/13mm thick closed cell elastomeric nitrile rubber insulation in tubing form. External Refrigerant piping shall be laid on the existing GI covered cable trays. Piping inside occupied spaces shall be supported by using Supplying(A) 38.10 mm dia /19mm thick insulation & fixing of suitable M S hangers duly painted with black enamel paint. Entire refrigerant piping work be carried out in accordance with the specifications.(A) 38.10 mm dia /19mm thick insulation |
| 279 | 28.6 mm dia /19mm thick insulation |
| 280 | 25.4 mm dia / 19mm thick insulation |
| 281 | 19.05 mm dia/19 mm thick insulation |
| 282 | 15.9 mm dia/13 mm thick insulation |
| 283 | 12.7 mm dia/13 mm thick insulation |
| 284 | 9.5 mm dia/13 mm thick insulation |
| 285 | 6.3 mm dia / 13mm thick insulation |
| 286 | Condensate Drain Piping (A) 25mm dia |
| 287 | (B) Cagging for Outdoors & Servo |
| 288 | CIVIL WORK (A) Foundation for outdoors |
| 289 | (B) Cagging for Outdoors & Servo |
| 290 | Control & Transmission Wiring : Supplying & drawing control cum transmission cable of size 2 core x 1.5 sqmm, copper conductor PVC insulated PVC sheathed unarmoured in the existing steel /PVC conduits pipes between indoor and outdoor unit including making connections at both ends etc. complete as required. |
| 291 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (A)4 X 25 sq. mm |
| 292 | 4 X 16 sq. mm |
| 293 | Supply, installation, testing and commissioning of 200 KVA fully digital and fully automatic servo voltage stabilizer along with phase sequence corrector as per IS 9815 to be connected to main panel of VRV unit for capacity 40 HP VRV unit, as per IS 9815, input voltage range 330V-470V, output voltage: 415+1% phase to phase, frequency: 50/60 Hz, response time: less than 10 MS, suitable for power factor loads, oil cooled, efficiency 99%, class of insulation: Class A,copper EC grade (99.9% pure) oil use as per ISI 335 marked” based solid – state, relay less, output voltage adjustable +6% of set voltage from front panel, provision for auto manual control, wide ambient temperature operation from -20 C to 50 C and other accessories like thimble and gland etc. including supplying & drawing 4x25 sq mm copper lead from MCCB to voltage stabilizer including copper thimble, end termination at both ends complete as per siterequirement labour cartage transportation etc. at site. Guarantee / Warrantee: 01 year from the date of exection of work.Make: Servolin |
| 294 | Supplying, fabricating and fixing at site of MS laminated sheds of following size made up with 65x32 mm square pipes and MS laminated sheet welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and 2 coats of paint including labour cartage etc. complete as required for the following locations at the terrace. Charak Palika Hospital (Size of shed: 4mtr x 4 mtr x3 Mtr approx) for servo |
| 295 | Supply, Fabrication & installation of G.l. duct of 22 SwG as per site requirement including 9mm nitrile rubber insulation and hanging materials, supports nuts bolts, painting complete as per site requirement including paiting complete as required at site. |
| 296 | Supplying and fixing of flexible canvas connection of ductable indoor with superior quality heavy duty fire retardant type flexible canvas connection etc complete as required at site. |
| 297 | SITC of MS powder coated volume control damper of suitable size. |
| 298 | SITC of aluminium powder coated linear grill of suitable size. |
| 299 | Electric Work (B-II) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group CFan point- 150 NosLight point-350 NosEx fan point-18 NosCall ball- 06 Nos |
| 300 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 301 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.A) 1. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 302 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.B. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 303 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.C. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 304 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.D. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire. |
| 305 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 306 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 pair |
| 307 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required Telephone socket outlet. |
| 308 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 309 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required2 run of cable |
| 310 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 311 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modularswitch, connections etc. as required. |
| 312 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 313 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/Square light of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 314 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\"curve including connections, painting etc. as required. |
| 315 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)A) 6 way Double Door |
| 316 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)B) 12 way Double Door |
| 317 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door |
| 318 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 319 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amp |
| 320 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100amp |
| 321 | Supply of 36 watt 2X2 LED square surface ceiling light panel color temp 6000K cool day light 50 Hz 230V make Syska/Philips / Osram or equivalent |
| 322 | SITC of 18-20 watt LED Post Top lantem made out of die cast aluminium base and spun aluminum Top with fitted with LED pt Module. Power LED's are mounted directly on inbuilt heat sink. A UV stabilized thermoformed P.C diffuser is provided for glare free lighting with IP-67 Protection and CCT 57OO-6500K, C>70, Constant current driver suitable for 100-280V AC working range,LM80 certified, Internal wiring Teflon insulated, Cu. Conductor, Efficacy >85 im/w Warranty 2 years. including fixing of GI Pipe of 2\\" dia for installation of LED post top lantern with allied accessories, connection with 2.5 sq.\\"-lm copper wire, earthing etc as per BIS. Make:- Syska/Phiiips / Osram or equivalent |
| 323 | Supply and fixing of LED tube light fittings batten type 20 watt,4 feet cool white, 6500 K, CRI ≥ 70,240 V, 50 HZ, Guarantee/Warrantee:- Two years Make: philips/wipro/Syska/panasonic/ Havell's/ Crompton or Equivalent |
| 324 | SITC of exhaust fan double ball bearing heavy duty,12 inch 3/4 blades sets down double ball bearing and motor should be copper winding performs well at low voltage, 1400 RPM , 230v/50 Hz, Grey colors. Warranty 02 years from the date of supply Make;- Havell's/ Crompton/ Usha or equivalent. |
| 325 | SITC of BLDC Ceiling fan 48\\" (1200 MM) sweep BEE 5 Star rated 3 nos blades 30 cm long down rod 2nos canopies shackle kit, safety rope copper winding power factor notr less than0.9service value min 6.85 air delivery min 215 CMM 350 RPM THD less than 10%remote or electronic regulator unit speed control suitable for 230V 50 HZ single phase AC supply, earthing etc. Complete as required Make:- Orient/ Havell's/Crompton/ Usha or equivalent |
| 326 | SITC of wall mounted fan of speed 1280 rpm,400 mm sweep , 3 blades,speed setting, suitable for single phase 230 volts,50 hz with 2 years warranty ,Make: Philips/Havell's Crompton or equivalent. |
| 327 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 328 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 329 | Supply and laying 6 SWG GI wire at 0.50 mtr below ground level for conductor earth electrode including connection/termination with GI thimble etc as required |
| 330 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 331 | S & F of cubical panel board made out of CRCA sheet 16 SWG powder coated of size 500X750X200mm deep nominal suitable for installation of MCCB 200amp 36 kA breaking capacity 4 pole 415 volts copper bus bar chamber having 4 nos 200 amp capacity copper bus bar of size 25mmX5 mm one set of Amp and volt meter with selector switch RYB indicating lights including wiring with 16 sq mm copper wire thimbles nut bolt along with grouting in the wall including connection testing communizing painting and providing locking arrangement along with lock 65mm size provision for ventilating air fins handle for opening of door fixing of danger plate including masonry/white washing work etc complete as required at site. |
| 332 | Horticulture Work -C Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or /and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 333 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to 25 Km. lead complete (cattle manure measured in stacks will be reduced by 8% for payment). |
| 334 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 335 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 336 | Supply of Areca palm plant well developed 5-7 sucker ht. 3.5' to 4' in atleast 7\\"x7\\" P/g bag/ P. Pot. |
| 337 | Supply of Golden Thuja ht. 1.5'-2’ bushy shape in size 9 x 9 P/bag . |
| 338 | Supply of Raphis palm well developed 5-7 equal height suckers height 1-1/2' to 02' feet |height in at least 10\\" X10\\" P/G bag. |
| 339 | Supply of Hibiscus rosasinensis of height 1’-1.5' ht. well developed in 6\\" x 6\\" p/bag. |
| 340 | Supply of Excoecaria bicolor of height 1' to 1.5' ht. well developed in 6\\" x 6\\" p/bag. |
| 341 | Supply of TMC Green ht. 1' to 1.5’, well developed, well branches in atleast 6\\" X 6\\" sizeP/g Bag. |
| 342 | Supply of Dracaena Mahatma ht. 1.25 fit to 1.5 fit full of fresh and healthy leaves well developed in gunny bag. |
| 343 | Supply of Calliandra ht. 1.5’-2’ fit well developed well branches in atleast 6\\" x 6\\" in P/Bag. |
| 344 | Supply of Dracaena victoria ht. 1.25 fit to 1.5 fit full of fresh and healthy leaves well developed in gunny bag. |
| 345 | Supply of Hamelia petans ht. 1 ft to 1.5 ft well branches, well developed in atleast 6 \\" X 6\\" P/G Bag. |
| 346 | Supply of Alpinia Variegated ht. 1'-1.5' well Developed size 9\\" x 9\\" in P/bag. |
| 347 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cost of plant & water). |
| 348 | Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 349 | Providing and displaying of Dracaena Song of India variegated having ht. 30cm to 45 cm, well developed, fresh & healthy foliage with bright leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 350 | Providing and displaying of Money Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 s in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 351 | Supply of Specimen Malpighia plants of ball shape ht. 65 cm in plastic pot size 30cm well developed. |
| 352 | Supply of Specimen Malpighia plants of cone shape ht. 150 cm in plastic pot size 30cm well developed. |
| 353 | Providing and displaying of Croton Baby Golden (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. |
| 354 | Providing and displaying of Croton Duck foot (Elite) having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 355 | IT Work-D 24×10/100/1000 Mbps 4×10 GbE SFP+ |
| 356 | 24×10/100/1000 Mbps PoE+ ports, 4×10 GbE SFP+ 370 W PoE budget |
| 357 | 10G SFP Module Single Mode |
| 358 | Cloud Controller for 25 AP for 3 years |
| 359 | Dual-band (5GHz and 2.4GHz concurrent) 802.11ax wireless access point with Mounting Bracket |
| 360 | 55\\" LED Display with Mounting Bracket & 10 Mtr HDMI Cable |
| 361 | Fiber Components 6 Core Fiber Cable Single Mode |
| 362 | 12 Port LIU Fully Loaded |
| 363 | SC-LC Fiber Patch Cord Single Mode 3 Mtr |
| 364 | Copper Components Cat-6 UTP Cable 305 mtr Box |
| 365 | Cat-6 I/O, Faceplate and SMB |
| 366 | Cat-6 RJ45 Connector ( 100 Nos) |
| 367 | Cat-6 24 Port Jack Pannel Fully Loaded |
| 368 | Cat-6 UTP Patch Cord 1 Mtr |
| 369 | Cat-6 UTP Patch Cord 2 Mtr |
| 370 | PVC & GI Components 25mm PVC Conduit |
| 371 | 32mm HDPE Pipe |
| 372 | 150x40 GI Raceway with all accessories |
| 373 | Rack & UPS Components 15U Wall Mount Rack with all accessories |
| 374 | 42U Floor Mount Rack with all accessories |
| 375 | 1KVA UPS with 10-15 min backup |
| 376 | Service Installation & Configuration of Switches |
| 377 | Installation & Configuration of Wireless Controller |
| 378 | Installation & Configuration of Access Point |
| 379 | Installation & Configuration of LED Display |
| 380 | Installation & Configuration of UPS |
| 381 | Laying of Fiber Cable |
| 382 | Laying of UTP Cable |
| 383 | Laying of PVC Conduit |
| 384 | Laying of Raceway |
| 385 | Installation of LIU |
| 386 | Installation & termination of Jack panel |
| 387 | Termination of I/O with SMB & Face Plate |
| 388 | Pigitail Splicing |
| 389 | Installation of Rack |
| 390 | Soft Digging |
| 391 | 30mm Wall Chipping for Conduit |
| 392 | 170mm Wall Chipping for Raceway |
| 393 | Fire Work-E Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including cutting, screwing Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, chilly clamps, including cutting holes and chases in bricks/core cutting in RCC wall/slab etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame including, dismantling of MS Pipe providing coat of steel primer and painting with two or more coats of synthetic enamel paint of approved required shade etc. complete to the entire satisfaction of Fire Officer. The measurement of pipe upto the level finish MS Pipe in the elbow. (A) 80 mm dia. |
| 394 | (B) 150 mm dia. |
| 395 | Supplying and fixing Single Headed Internal / External Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with 80 mm dia flanged inlet, cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap, chain and all accessories as required etc. complete to the entire satisfaction of Fire Officer.Single Headed Stainless Steel |
| 396 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required (A 80 MM Dia |
| 397 | 150 MM Dia |
| 398 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.80 mm dia |
| 399 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) |
| 400 | Supplying and Fixing of Water Tank made of Stainless Steel grade 304 of Capacity 5000 LTRS, Dia - 1800 mm, Height - 2000mm, Shell Thk-5mm, Top/Bottom Flat Thk-6mm, Inlet/Outlet & Manhole As Per Requirement, Type- Vertical Cylindrical Tank, MOC - SS 304 (Weight 800KG Appx.) etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 401 | Providing and Fixing of G.I. Tank Connection 80 mm dia with complete fitted nipple, sockets, tank connection etc. complete as per the direction of Fire Officer. |
| 402 | Providing and laying cement concrete in foundation for Polyethylene Water Storage Tank at terrace level including the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 (civil) item 4.2.3 rate per cum = 9895.20rate per cum = 9895.20 x correction factor (0.973) x cost index (1.03) |
| 403 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head |
| 404 | Supplying, Testing and Commissioning of CO2 type Fire Extinguisher ISI marked conforming to IS: 15683:2018 of Capacity 4.5 Kg. complete with delivery hose horn, squeeze grip/ wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature: - 30ºC to + 60ºC etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 405 | Supplying, Testing and Commissioning of Water Fire Extinguisher (Stored Pressure) Capacity 09 Litre duly ISI marked conforming to IS: 15683. Complete with delivery hose, squeeze grip release valve, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: +5ºC to + 60ºC etc. complete in all respect to the entire satisfaction of Fire Officer. |
| 406 | Providing and Fixing of Exit / Escape Route Signages/Emergency Evacuation Plan made of 3 mm +/- 10 % Aluminum composite panel with photo luminescent self glowing signages in desired text/ graphics with U.V proof coating for pad protection fixed with mounting tape, steel screw which ever is required etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 407 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 408 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 409 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. |
| 410 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. |
| 411 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50mDSR 2023 (civil) item 4.2.3 rate per meter = 998.65rate per meter = 998.65 x correction factor (0.973) x cost index (1.03) = 972/Mtr. Ordinary rock : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. |
| 412 | P/F/T/C of protection to embedded MS pipes and fittings by applying protective primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification.150 mm dia |
| 413 | P/F/T/C of Electrical Control panel for Terrace Pump (02 Set) wall mounted type, fabricated out of 16 swg. CRCA sheet, compartmentalized with hinged lockable doors, dust & vermin proof, powder coated of approved shade, cable alley, interconnection with solid aluminium strip/single core PVC insulated FRLS copper conducted cable, having suitable mounting for switch hear & accessories & internal control (relay, timer, sensor annunciation window for fault indication ON/OFF/TRIP indication along with suitable conductors, overload protection, current sensing type single phase preventer & colour coded power wiring with suitable size fire retardant low smoke PVC insulated copper cable with conductor, earth terminals, numbering suitable for operation on 415V, 3 phase, 50 HZ AC supply with enclosure protection class IP 42 complete as per satisfaction. Starter meter, selector switches, indicating LED with terminal facilities for repeat indicator of various audio & visual at terrace level & remote push button for ON/OFF operation in Fire Control Room etc. complete to the entire direction and satisfaction of Engineer in-Charge. |
| 414 | P/F/T/C of M.S. fire hose cabinet made out of 18 gauge M.S. sheet capable of accommodating RRL hose & Branch pipes. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour - for external and Internal hydrant to the entire satisfaction of Engineer in-charge / Fire officer.2100 x 900 x 600 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender