Tender For Renovation Of Graduate Engineers Trainee Hostel At Kcc Township
Tender Value
15.42 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
0 days left
EMD
36410
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhunjhunu → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Graduate Engineers Trainee Hostel At Kcc Township
BOQ
| Sl. No. | Item Description |
| 1 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 2 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 3 | REMOVING DRY OR OIL BOUND DISTEMPER BY SCRAPPING, SAND PAPERING AND PREPARING THE SURFACE SMOOTH INCLUDING NECESSARY REPAIRS TO SCRATCHES ETC. COMPLETE. |
| 4 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 5 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite for kitchen platforms, laid over 20 mm thick base cement mortar 1:4 finish |
| 6 | Old mosaic floor rubbing, cleaning and polishing of floor |
| 7 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 8 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 10 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :With cement mortar 1:4 (1 cement : 4 fine sand) |
| 11 | Epoxy with damp proof based roof treatment on roof: Involves cleaning of roof, cutting of old joints, filling of cement slurry in the joints and painting Epoxy based roof treatment. |
| 12 | Providing and Fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink conforming to IS:13983, with C.I. brackets and Stainless-Steel Plug 40 mm dia, including painting of fittings and brackets, cutting and making good the walls wherever required. (A) Kitchen Sink with Drain Board: Size 510 × 1040 mm, bowl depth 250 mm. |
| 13 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in charge :15 mm to 40 mm nominal bore |
| 14 | PROVIDING AND FIXING GI PIPES COMPLETE WITH GI FITTINGS AND CLAMPS INCLUDING MAKING GOOD THE WALLS ETC. CUTTING CHASES AND MAKING GOOD THE WALL15 MM NOMINAL BORE |
| 15 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore |
| 16 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 17 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:3:6 or richer mix |
| 18 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 19 | 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. Dark shade pigment with Ordinary cement. |
| 20 | REINFORCED CEMENT CONCRETE WORK IN RAFTS, FOOTING, BASES OF COLOUMNS ETC AND MASS CONCRETE EXCLUDING COST OF CENTERING, SHUTTERING AND REINFORCEMENT ALL WORK UPTO PLINTH LEVEL 1:2:4 ( 1 CEMENT :2 COARSE SAND :4 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE. |
| 21 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars |
| 22 | Half brick masonry with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 23 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore |
| 24 | DISMANTLING WHITE VETROUS CHINA WASH BASIN/SINK/URINAL INCLUDING FITTINGS AND REMOVAL OF UNSERVICABLE MATERILAS TO SITE/CENTRAL STORES AS PER DIRECTION OF ENGINEER IN-CHARGE. |
| 25 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe32 mm dia |
| 26 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 27 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 28 | Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia |
| 29 | PROVIDING AND FIXING PTMT SOAP DISH HOLDER HAVING LENGTH OF 138 m.m. ,BREADTH 102 m.m., HEIGHT OF 75 m.m. WITH CONCEALED FITTING ARRANGEMENT. WEIGHING NOT LESS THAN 106 gms. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 31 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion ingle socketed pipes.110 mm dia |
| 32 | DISMANTLING INDIAN TYPE W.C.PAN/EUROPIAN TYPE W.C.PAN, INCLUDING FOOR REST AND FITTINGS, BUT EXCLUDING CISTERN AND REMOVAL OF UNSERVICABLE MATERILAS AND DEPOSITING THE SERVICABLE MATERILAS TO SITE/CENTRAL STORES AS PER THE DIRECTION OF ENGINEER IN-CHARGE. |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 34 | PROVIDING AND FIXING 75 M.M. DIAMETER C.I. PIPE |
| 35 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. |
| 36 | PROVIDING AND FIXING SQUARE-MOUTH S.W. GULLY TRAP CLASS SP-1 COMPLETE AS PER STANDARD DESIGN :100X100 MM SIZE P TYPEWITH COMMON BURNT CLAY F.P.S. (NON MODULAR) BRICKS OF CLASS DESIGNATION 7.5 |
| 37 | Carriage of material by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish: Lead 1 KM. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender