Tender For Special Repairs Of Building No P-144 And Gharondha Hanger With Lean Administrative Building Structure At installation Dega, Visakhapatnam
Tender Value
11.08 Crore
Estimated cost
Bid Submission
18 Nov 2026
19 days left
EMD
8.79 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Building No P-144 And Gharondha Hanger With Lean Administrative Building Structure At installation Dega, Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Corrigendum1 | Date | 18-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 2 | M&L for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 20 mm thk cement screed bed in cm 1:4 for laying floor finishes complete all as specified and directed. |
| 3 | M&L for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 10 mm thk cement screed bed in cm 1:3 for laying floor finishes complete all as specified and directed |
| 4 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 for laying floor finishes complete all as specified and directed |
| 5 | M&L for Glazed ceramic coloured tiles 350x250x7 mm/450x350x7 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or Coloured cement to match & including 10mm thick rendering in CM (1:4) on fair faces of brickwork or concrete surfaces complete all as specified and directed |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar etc complete all as directed |
| 7 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed in CM (1:4) complete all as specified and as directed |
| 8 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10 mm thick rendering CM (1:3) complete all as specified and as directed. |
| 9 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 20 mm thick screed bed 1:6 CM in floors complete all as specified and directed |
| 10 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 11 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified and as directed. |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as directed. |
| 13 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channel of grid work 600x600mm and 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 14 | M & L for Exposed metal frame ceiling with calcium silicate board of 6 mm thickness siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed. |
| 15 | M & L for 8 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 16 | M & L Providing pressure gunitting in CM (1:3) upto 40mm thick averaging 25mm thick for soffits of slabs, beams, columns,chajjas, cantilever slab, fins, stair cases, railing etc complete all as specified and directed including brush bond as per manufacturer instruction and supply and fix welded steel wire fabric of mesh 75x25mm of weight not less then 4.0KG per 1 Sqm fixed to proposed surface for guniting with suitable pins/clamps/welding to the existing reinforcement after preparing old surface and applying polymer modified cementations coating on concrete surface prepared for gunniting using NITTO bond/brush bond of M/S Fosroc Chemicals and equivalent and applying epoxy treatment to exposed surface and making good surface with colour wash/white wash/snowcem painting two coats as specified and as directed |
| 17 | Chipping of Spalled/ Weak concrete material from slabs, Chajjas, columns, beams, of thickness varies from 25 mm to 100 mm., with standard power driven percussion type or pneumatic chisel of standard make as directed by engineer in charge including tapering all edges complete and disposal of debris up to a lead of 50 mts and all lifts and all as specified and directed |
| 18 | Clean the Rust, over and behind a reinforcement bars by manual methods like hammering the rebar, using wire brush, chiselling to form a totally rust free finishing surface throughout the Length of bars Complete all as directed. |
| 19 | Supply and apply the High Performance Zn Yellow Primer to the existing prepared surface of reinforcement bars to protect from corrosion complete all as directed. |
| 20 | Supply and apply of Epoxy bonding agent which is pre packed for on-site mixing use which have mix density 1070 Kg/m3 and shear bond strength of 4 N/mm2 consumption to be maintained below 3 Kg/Sqm and overlaying of concrete/mortar to be performed on epoxy bonding agent when it is tacky |
| 21 | Providing and applying single component, dual shrinkage compensated, micro-concrete - Smart Care Micro concrete is used for the repair and restoration of damaged RCC structures like beams, columns, slabs etc. The Water to Powder Ratio is of 0.14+/-0.01, Workability Time @30°C is 180mm after 20 minutes as per ASTM C 1437, Compressive Strength @ 30°C is 20 MPa at 1 day, 40 MPa at 7 days, 50 MPa at 28 days as per STM C 109 : 99, Flexural Strength @ 30°C A is 9.5 MPa at 28 days as per ASTM C 580, Tensile Strength @ 30°C is 3.1 MPa at 28 days as per ASTM C 307, Fresh Wet Density is 2297 kg/m3 as per ASTM C 138. For thickness above 100mm, 6 mm size coarse aggregate in specified percentage by weight subjecting to the maximum of 50% as directed by the engineer in charge Ensure that the concrete laid for encasement is dense, properly compacted, free from honey combs, and necessary scaffolding as directed by the Engineer in charge. |
| 22 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and directed |
| 23 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm complete all as specified and directed |
| 24 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 kg/sqm at bottom of the membrane including primering the surface and applying normal treatment complete all as specified and as directed. |
| 25 | M&L for cool roof tiles of size 300x300x 7mm thick & SRI value more than 90 as on roof laid over screed bed over bedding layer of mortar 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 26 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as directed |
| 27 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed |
| 28 | M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls old size bricks built in cement mortar 1:4 complete all as specified and directed |
| 29 | M&L Taking down cement plaster on brick or stone walls, ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed |
| 30 | Rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed |
| 31 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and with WPC @ 2% finished even and smooth without using extra cement complete all as specified and directed |
| 32 | M&L for 5 mm thick rendering in CM (1:3) on brick or concrete surfaces on ceiling surface complete all as specified and as directed. |
| 33 | S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete as specified and directed. |
| 34 | S&F in repairs 32mm waste fitting, brass , CP for glazed ware sinks, basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified. |
| 35 | Supply of Water proofing compound |
| 36 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as directed |
| 37 | Supply and laying of 16 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 on walls/ceiling or laying in floors complete all as specified. |
| 38 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as directed |
| 39 | Supply and laying of 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floors complete all as specified. |
| 40 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed. |
| 41 | Supply and laying of 25 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings walls/ceiling or laying in floor complete all as specified. |
| 42 | S&F in rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified . |
| 43 | S&F in repairs 20mm dia ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified. |
| 44 | S&F in repair 25mm repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in 15mm repairs mm bore dia stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle, screwed both ends for pipe or for unions and fixed complete all as specified and directed. |
| 46 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete as specified and as directed. |
| 47 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 48 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, & brackets complete set all as specified and directed. |
| 49 | S&F in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on existing bracket, fixing of tap, waste fitting, pipe and union including pedestal complete all as specified and as directed. |
| 50 | S&F in repair stop valve, cast alloy screwed down high pressure with crutch or butterfly handle complete all as specified and directed |
| 51 | S&F in repair CP shower rose of size 125 mm with or without swivel joint, any size including fixing to tube complete all as specified and directed |
| 52 | S&F in repair 15 mm bore pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe fixed. complete all as specified and directed. |
| 53 | S&F in repair 15 mm bore CP bib tap of fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed. |
| 54 | S&F in repair 15mm bore CP stop valve with wall flange fancy type with long shunk with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of concealed type complete all as specified and as directed. |
| 55 | S&F in repair bevelled edge mirror of selected quality glass mounted on 6 mm thick AC bldgs. boards or commercial ply wood and fixed to wooden plugs with chromium plated brass screwed and cup washers complete all as specified and directed. |
| 56 | S&F in repair brass chromium plated towel rail 20 mm dia complete all as specified and as directed. |
| 57 | S & F in repair Vitreous China Urinal, half stall type, white including flushing cistern, flush pipe and waste pipe, complete all as specified. |
| 58 | S&F in repair PVC connections 15 mm size with PTMT of 450mm long complete all as specified and as directed. |
| 59 | S&F 100mm dia grating doom of PTMT steel complete all as specified and as directed. |
| 60 | M&L in repair PVC (SWR) gully trap 125/110 mm setting & fixing of size 125/110 mm complete all as specified and directed. |
| 61 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 62 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 63 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 64 | S&F 110mm size PVC (SWR) bends any radius complete all as specified and directed . |
| 65 | S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed. |
| 66 | S&F 110mm size PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and directed |
| 67 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed |
| 68 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed |
| 69 | S&F 75mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed. |
| 70 | S&F in repair to Harrison rails, mild steel, chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed |
| 71 | Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 72 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 73 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of wood grain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 74 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain printed PVC for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to & 5 mm thick x 15 mm wide PVC sheet beading and decorative PVC beading of 10mm x 10mm (90 degree) with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified . |
| 75 | M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 76 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 77 | S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places byinserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge. |
| 78 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Area of opening nexc 2.00 sqm complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 79 | M&L for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Area of opening exc 2.00 sqm complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 80 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 81 | S & F in repairs 12mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 82 | S & F 4.8 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane for cup board, cabinet, racks etc complete all as specified and as directed. |
| 83 | M&L for toughened glass 12 mm thick as in hinged door, window, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings complete all as specified and as directed. |
| 84 | S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed. |
| 85 | S&F in repair Door closer Cast iron body hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 86 | S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed. |
| 87 | S&F 100 mm size mild steel hinges medium weight complete all as specified and directed . |
| 88 | S&F for 150 mm long mild steel barrel tower bolt of extruded section complete all as specified . |
| 89 | S&F in repair 30mm continuous(piano) hinges, mild steel, bright finish or electro galvanised complete all as specified. |
| 90 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed |
| 91 | S & F in repairs 18mm thick Plywood , grade BWP,type BB fixed with nails to timber frame work complete all as specified and as directed. |
| 92 | S & F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed |
| 93 | M&L for preparation of surfaces of wood or wood based material of any description not otherwise described over 10 cm width or girth new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 94 | M&L for applying one coat of synthetic enamel paint including preparation of old painted steel surface any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 95 | M&L for applying two coat of synthetic enamel paint including one coat of red oxide zinc primer on new steel surface any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 96 | M&L for applying two coat of synthetic enamel paint including one coat of zinc primer on new steel surface any description not otherwise described nexc 10 cm width or girth complete all as specified and directed. |
| 97 | M&L for Preparation of New or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and chalk whitening primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls complete all as specified and directed |
| 98 | M&L for Complete removal of existing treatment on old or untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls complete all as specified and directed |
| 99 | M&L for Finishing walls with textured exterior paint of required shade with Two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over 1 mm thick wall care putty complete all as specified and as directed. |
| 100 | Material & Labour preparing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 1 mm thick wall care putty complete all as specified and as directed. |
| 101 | M&L for Complete removal of existing treatment on old or untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 1 mm thick wall care putty complete all as specified and as directed. |
| 102 | M&L for Preparing newly plastered surfaces on ceiling and applying three coats of white wash complete all as specified and as directed. |
| 103 | M&L for Preparing old plastered surfaces on ceiling and applying two coats of white wash complete all as specified and as directed. |
| 104 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 105 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all as specified and as directed. |
| 106 | Fixing only framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe.290. Gde-E-166 complete all as specified and as directed. |
| 107 | S&F in repairs Mild steel bottom steel rollers of 150 mm to 200 mm with ball bearing shaft , plates complete suitable to take weight 04 to 05 ton of hangar doors complete and fixed in position complete all as specified and as directed. |
| 108 | S&F in repairs Mild steel top steel rollers of 100 mm to 150 mm with ball bearing shaft , plates complete suitable to take weight 04 to 05 ton of hangar doors complete and fixed in position complete all as specified and as directed. |
| 109 | Demolition and breaking up drain pipes (salt glazed ware , AC or reinforced) set in cement mortar of internal dia of pipe 150 mm complete all as directed |
| 110 | M& L for plain cement conrete 1:3:6 tye C2 using 40 mm graded aggregate concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 150mm dia pipe complete all as specified and directed |
| 111 | M&L for 150 mm NP3 pipes laid in trenches & jointed in cement mortar including testing as directed. |
| 112 | M&L for cement concrete type 1:3:6 C-2 using 40 mm graded aggregate as in surface channels drains complete all as specified and as directed. |
| 113 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 114 | S& F of 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 115 | S&F of 25mm thick pre-formed filler for expansion/ crumple joints complete all as specified. |
| 116 | M&L for 10 mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive including taking down complete all as specified. |
| 117 | M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in bldg. complete all as specified and as directed. |
| 118 | S&F in repairs of Venetian blinds of polyester material with rollers and brackets for fixing of approved colour and pattern and size fixed to wall complete all as per direction of Engr-in-charge |
| 119 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 120 | Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern as in roof coverings complete all as directed |
| 121 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.70mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 122 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.70mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 123 | Surface Preparation ( All laitance, surface contamination or existing floor toppings ) should be removed by mechanical means such as shot blasting, Scarifying or floor grinding till hard substrate is found. After surface preparation, all loose debris and dirt should be removed by vacuum or air blower. Heavy oil or grease deposits should be removed either mechanically or by jet. A close visual examination should be made to verify cleanliness and soundness. Any weak or suspect areas should be repaired. Grinding the concrete surface of the groove on both sides to a depth of 10mm using hand grinding machine and dirt should be removed by vacuum or air blower completely as specified and directed by Engineers-In charge. |
| 124 | M&L for crack repairs by widening the existing floor cracks by 0.25mm to 9mm wide at any Depth, groove cutting to V-Shape in the floor, cleaning the groove by removing of all loose particles using blower and application of Epoxy based primer groove complete as specified and directed. |
| 125 | M&L for providing flow applied epoxy resin based flooring of 4mm total thickness with 2mm thick high strength self smoothing under lay with three compound system comprising of epoxy resin base, resin hardener & filler Nitofloor EU5 of M/s Fosroc or equivalent approved make as specified here in after and floor topping with self-smoothing epoxy polyurethane 2 mm thick NitoflorEPU2000 of M/s Fosroc or equivalent approved make as specified here in after ) over a coat of solvent based Epoxy Resin Primer Nitoprime 25 designed for maximum absorption and adhesive to concrete substrate on existing floor by using stiff brushes and/or rollers for primer and serrated trowels and spiked nylon rollers for finishing coat including preparation of existing flooring cut open all anchor grooves along floor topping termination points , all cracks in the floor concrete preparing the surface of concrete substrate with scarification or by suitable mechanical means and cleaning the surface with industrial vacuum cleaner to remove all foreign matter , dust and debris etc including filling the cut open grooves with same material , finishing the surface to even and plain surface using suitable means to remove all imperfections , trowel marks and entrapped air complete all as specified as directed and as per manufacturer's instructions. Note: The work shall be executed by the Authorised Applicator of the manufacturer under the guidance of manufacturer of epoxy flooring .Make: M/s Fosroc chemicals India (P) Ltd or M/s STP Ltd or M/s BASF India Ltd. |
| 126 | M&L for preparation of construction/Dummy joint grooves of size 15mm x 20mm,cleaning the surface and removing the dust, unsound or contaminated material, plaster , oil, paint , grease, corrosion deposits or algae, oil and grease deposit should be removed by mechanical means. Application of primer to the groove and filling the groove with Shalifix RME 70 or equivalent (three component material i.e. base, hardener & filler) and finishing the surface for application of PU scratch and top coat complete all as specified and directed.Note : Cost includes removal of existing sealant and groove preparation. |
| 127 | M&L for preparation of Expansion joint grooves of size 25mm x 30mm for cleaning the surface and removing the dust, unsound or contaminated material, plaster , oil, paint , grease, corrosion deposits or algae, oil and grease deposit should be removed by mechanical means. Prime sealing slot surface with Primer using a clean dry brush, inserting backer rod of reqd size in the groove and finally sealing the groove with polyurethane based sealant and finishing complete all as specified and directed. Make STP Shaliseal PU or equivalent.Note : Cost includes removal of existing sealant and groove preparation. |
| 128 | M & L for levelling the concrete floor surfaces, grinding surface without any dust, oils, laitance, cement mortar etc. and application of three component epoxy mortar on the primed surface Sika 41 or equivalent makes as specified in list of makes, to get a required finish complete all as per manufacturer instructions, as specified and as directed. |
| 129 | M&L for Pavement Quality concrete (PQC) of minimum 28 days field flexural strength of 45 Kg/Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15-2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 Kg/Cum of cement with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent, with equivalent dia 15-40 micron, minimum melting temperature as 240 C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in clause 10.1.14 and table 9 of IRC 15-2017 complete all as specified and directed. |
| 130 | M&L for line marking of 100mm to 150mm width using Epoxy or PU based material on the finished floor of required colour complete all as specified and directed. Make: STP Shalifloor TC 2HBE or equivalent. |
| 131 | S&F Aluminium composite panel(ACP) 4mm thick of approved colour for interior / exterior in any position for any height consisting of two layers of aluminium skin of 0.25mm thick sandwiching a thermo plastic core in continuous lamination process with PVDF coating for interior / exterior grades ensuring long colour and no fungal attack including grid work made with aluminium square pipe of size 25mm X 25mm X1.5mm thick and fixed to the panels with suitable fasteners without any undulation in facias complete all as per manufacturers instructions and as directed. |
| 132 | S&F cold rolled nickel plated steel 'O' crank soft closing concealed hinge including necessary fixing arrangement to shutter complete all a specified and directed. |
| 133 | S&F sound proofing to walls with self-adhesive acoustic Panels Tiles with polyester sound proof padding , High Density soundproof wall panels , sound absorbing panels complete all as specified and as directed. |
| 134 | Demolition of reinforced cement concrete in ground floors and paving not exc 15 cm thickness (below or above ground Level.) complete all as directed |
| 135 | M&L for Cement concrete Plain cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundations, filling and mass concrete and similar works complete all as specified and as directed. |
| 136 | M&L for M30 Design mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 137 | M&L for flat edges Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 138 | M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed |
| 139 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 140 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 141 | S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm including waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 142 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 143 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 144 | S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware |
| 145 | S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhead shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & over head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayag/Hindware |
| 146 | S&F in repairs CP Hand shower 27x27 mm square shape single flow with Air effect (ABS body & face plate chrome plated) with Rubbit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera |
| 147 | M&L for insulated PVC Wall Lining consisting of PVC Insulated Panels with wood grain printed having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing |
| 148 | S&F GI frame work for seamless finishing comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges 15 mm each and web of 45 mm complete all as specified and directed |
| 149 | Taking down aluminium / copper point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, cover plate , frame and light fittings etc. and making good the disturbed surface on walls floors complete all as specified and directed by Engr-in-charge. |
| 150 | M & L For Point Wiring complete with 1100 Volts, FRLS-H Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell point controlled by One Switch with all accessories complete all as specified. [Note- The PVC Conduit to be Concealed in wall through cutting, Chassing, Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are included for same] |
| 151 | All as per item No. 150 above but for 05 Amp switch socket out let, same board complete all as specified |
| 152 | All as per item No. 150 above but for 05Amp switch socket out let, independent with 1.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified |
| 153 | All as per item No. 150 above but for 15/16 Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified |
| 154 | All as per item No 150 here in before but one light point controlled by two 02 way switches. |
| 155 | S & F Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 156 | S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 157 | S & F ceiling rose surface bakelite with 3 terminals complete all as specified and directed by Engr-in-charge. |
| 158 | S & F of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 159 | S & F of Socket 15A/16A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 160 | S & F of modular Fan step regulator, 120W - 2 module complete all as specified. |
| 161 | S & F modular switch 2 way 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 162 | S & F LED tube light fittings of 20 Watt of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 163 | S & F LED mirror light fittings, 2 feet long of minimum 9 Watt of cool white / warm wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 164 | S & F Square recessed mounted LED light (2'x2') of minimum 36 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 165 | S & F High bay light 200 W with a pressure die cast housing; 170 lm/w efficacy and surge protection (5KV inbuilt, 10KV external) . ingress protection of IP66 with additional safety chain, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 166 | S & F Building Security light LED type of minimum 35 W Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 167 | S & F Building Security light LED type of minimum (90 W) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 168 | S & F LED post-top lantern garden light 40 W, 5 Feet length output, 5700 K of cool /warm white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. |
| 169 | S & F recessed mounted LED light of round type for Ceiling cut-out: height 16 mm, minimum 12 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old unserviceable fitting complete all as specified and as directed by the Engineer-in-Charge. |
| 170 | S & F Square recessed mounted LED light of round type for Ceiling cut-out height 16 mm, minimum 18 Watt warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 171 | Removing and re-fixing LED fitting and fixture of any type and any capacity, keeping in safe custody and refixing the same after necessary B/R and ceiling work complete all as directed by Engineer-in-charge. |
| 172 | Taking down ceiling fan of any size from its position and doing complete repair of fan and refixing the same after repairs complete all as directed by Engr-in-Charge.Note : Material required for repair will be measured and paid under separate item of this schedule as \\"Supply only\\". . |
| 173 | Materials and labour for rewinding of ceiling Fan complete upto 1400 mm sweep with heavy duty super enamelled copper winding wire of existing gauge including all insulation materials, varnishing, heating, greasing etc. cutting and removing the old burnt winding complete all as specified and as directed. Note:- replacement of unserviceable parts like capacitor, bearing, bush, hanging clamp, reel & nut bolt etc measured and paid separately. |
| 174 | Supply only 02 Nos canopy complete all as specified and as directed. |
| 175 | Supply only Ball bearing for ceiling Fan No 6200 complete all as specified and as directed. |
| 176 | Supply only blade set of 3 for ceiling Fan, complete all as specified and as directed. |
| 177 | Supply only Hanging clamp and Nut bolt with split pin for ceiling Fan complete all as specified and as directed. |
| 178 | Supply only Fan capacitor of capacity 2.5 mfd epoxy filled type complete all as specified and as directed. |
| 179 | Supply only Fan down rod upto 600 mm complete all as specified and as directed. |
| 180 | M&L for Repairs to fan shaft by filling metal, cutting by machine, Grinding, polishing complete and making good adequately for ceiling fans complete all as specified and as directed. |
| 181 | M & L for painting of Ceiling Fan complete upto 1400 mm sweep with one coat of white paint/existing fan using spray machine painting including cleaning, washing of surfaces complete all as directed. |
| 182 | Taking down Exhaust fan/Air circulator fan of any size from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, fan capacitor of 1.5 mfd/4 mfd and other spare parts painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed by Engr-in-Charge. . |
| 183 | Rewinding of exhaust fan motor of sweep up to 300mm & any make (including flameproof/normal type), with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated leatheroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer-in-Charge. |
| 184 | Rewinding of Air circulator / Pedestal Fan motor of sweep 450mm & 600mm & any make, with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated leatheroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge. Please Enable Macros to View BoQ information |
| 185 | Rewinding of Air circulator / Pedestal Fan motor of sweep 450mm & 600mm & any make, with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated leatheroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 daysNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender