Tender For Construction Of Neepco Recreation Center (Nrc) Cum Auditorium Building At Thps, Mizoram.
Tender Value
91.83 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
27 days left
EMD
1.84 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolasib → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Neepco Recreation Center (Nrc) Cum Auditorium Building At Thps, Mizoram.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation over areas (exceeding 30 cm in depth,1.50m in width as well as 10sqm on plan) including disposal of excavated earth,lead upto 50m and lift upto 1.50m, disposal earth to be levelled and neatly dressed (a). Ordinary and hard soil |
| 2 | Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations,fence post,etc and disposal of all surplus soil as directed within a lead of of 30 meters etc. (a). Ordinary Soil |
| 3 | Providing and filling stone aggregate of size below 90mm in plinth etc. in layers not exceeding 10cms in depth, consolidating each layer by ramming and watering and dressing complete |
| 4 | Providing and filling approved river sand in trences, pilnth etc. in layers not exceeding 20cms in depth, consolidating each layer by ramming and watering and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering-All work upto plinth level (a) 1:2: 4 (1 cement :2 course sand :4 stone aggregate 20mm nominal size) |
| 6 | Providing and Laying in Position reinforced cement concrete excluding cost of centering and shuttering, finishing and reinforcement in... all work upto plinth level..(a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 stone aggregate 20mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors,roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement complete(a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 stone aggregate 20mm nominal size) |
| 8 | Reinforced cement concrete work in walls including attachedpillasters, columns, pillers, posts, piers, abutments, return walls,retaining walls, struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete (a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 stone aggregate 20mm nominal size) |
| 9 | Steel reinforcement for RCC work including straighthening,cutting, bending, placing in position and binding all complete. Thermo-Mechnically Treated Bars |
| 10 | First class brickwork in foundation and plinth in: (b) In Cement mortar 1:4 (1 cement :4 coarse sand) |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 12 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement : 2course sand : 4stone aggregate 12.5mm size) |
| 13 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufcure's specification. |
| 14 | Half brick masonry with first class brick in superstructure above plinth level upto floor V level. (a) In cement mortar 1:4 |
| 15 | Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 well graded stone aggregate 20mm size) finished with a floating coat neat cement including cement slurry etc. complete but excluding the cost of nosing of steps etc.. 40mm thick with 20mm nominal size stone aggregate |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :. Foundations,footings,bases of columns etc. for mass concrete |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for.. Etc…. Columns, plillars, piers, abutments, posts and struts |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for all heights… Lintels,beams,plinth beams,girders,bressumers and cantilevers,etc. |
| 19 | 12mm Cement plaster 1:4 (1 cement : 4 fine sand) |
| 20 | 15mm Cement plaster 1:4 (1 cement : 4 fine sand) |
| 21 | Structural steel work rivetted,bolted welded in built up sections,trusses and framed works,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete.(In Tees,R.S.Joists,Angle. Flats and Channel). |
| 22 | Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc.complete |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 24 | Providing and fixing in ceiling flat pressed 3 layer particle board (medium density) 12mm thick conforming to IS: 3087 with necessary nails etc. complete (frame work of base to be paid seperately). |
| 25 | Providing and fixing plain ,chamfered edged 1st class local wood beading with screws or nails for walls,ceiling etc.complete (a) 50 x 12mm |
| 26 | Providing and fixing MS fan clamp 12mm dia HYSD bar bent to shape with hooked endin RCC slabs during laying including painting the exposed portion of loop complete. |
| 27 | Providing 1st class local wood work dressed in frames of chaukhat for doors, windows,clerstory windows fixed in position |
| 28 | Providing and fixing 1st class local wood panelled shutters for doors etc. including M.S. butt hinges with necessary screws etc. complete… (b) 35mm thick |
| 29 | Proving & fixing 25mm thick 25cm wide wooden eaves board (a) Ornamental eave board (i) Using 1st class local wood |
| 30 | Providing Trapezoidal Polyester Coated Galvanised Steel sheets roofing of any colour of 1.06m width at all levels including fitting and fixing ridging with self drilling,self tapping screws,EPDM washers et.complete excluding the cost of purlins,rafter and trusses. (ii) For 0.50 mm thick |
| 31 | Providing and fixing of Polyester Coated Galvanises Steel sheets of any colour ridges,gutter or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with self Drilling & Tapping Screws with EPDM washer but excluding the cost of base. (ii). For 0.50mm thick |
| 32 | Providing and fixing M.S.handles with necessary screws,etc.complete … (b) 125 mm |
| 33 | Providing and fixing M.S.Tower Boltrs (socket bolt) bright finished with necessary screws,etc.complete… (a) 300 mm |
| 34 | Providing and fixing M.S.Sliding Door Bolts (aldrops) bright finished and/or black empanelled with nuts and screws etc.complete… (a) 300 x 16 mm |
| 35 | Providing and Fixing anodised alluminium work for doors,windows,ventilators and partitions with extruded built up standard sections/other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia. and size,including necessary filling up of gaps at junctions,at top,bottom and sides with required PVC/ neoprene gaskets etc.Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/panelling.CP brass/stainless steel screws all complete including fixing of glasses but excluding cost of glasses... Anodised ....(b) (i) 2-track sliding windows/ventilators |
| 36 | Providing and Fixing alluminium work for doors,windows,ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodised transparent or dyed to required shade according to IS :1868. (Minimum anodic coating of grade AC 15 ),fixed with rawl plugs and screws or with fixed clips or with expansion hold fastners including necessary filling up of gaps at junctions,at top,bottom and sides with required PVC/ neoprene felt etc.Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/panelling.CP brass/stainless steel screws, all complete as per architectural grawings and the directions of Engineer-in-Charge. ( Glazing and panelling to be paid for seperately ) For fixed portion. (b) Anodised |
| 37 | Supplying of glass panes at site…(b) 5mm thick plate sheet glass |
| 38 | Providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in all colours, shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1cement : 4 course sand) including pointing the joints with white cements and matching pigments etc. complete. as per designed colour... Matt/Antiscratch |
| 39 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacturer) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed cement mortar 1:3 (1cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 40 | Providing and fixing white vitreous china pedestal water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & CP. flushbend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cuttings and making good the walls and floors wherever required:.. W.C. pan with ISI marked white solid plastic seat and lid |
| 41 | Providing and fixing vitreous china Urinal Flat Large 59 x 37.5 x 39 cm of Parryware/Hindware /Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets,cutting and making good the walls and floors wherever required.(i) White |
| 42 | Providing and fixing wash basin with C.I. brackets 15mm CP. Brass pillar taps, 32mm CP. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.... White Vitreous China Wash basin size 630x450 mm with a single 15 mm CP. brass pillar tap |
| 43 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing: Rectangular shape 500 x 400 mm |
| 44 | Providing and fixing C.P. brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour ….. 750x20mm size. |
| 45 | Providing and fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C.P. brass screws. (a) Glass container with C.P. lid and brackets. |
| 46 | Providing and fixing on wall face SWRPVC soil waste and vent pipes including jointing with rubber lubricant/cement solvent complete… 110mm dia. |
| 47 | Providing and fixing SWRPVC socket including jointing with rubber lubricant/ cement solvent. .. 110 mm dia socket. |
| 48 | Providing and fixing single equal SWRPVC plain junction of required degree with access door (T-junction)… 110x 110x110 mm |
| 49 | Providing and fixing SWRPVC plain bend of required degree (87.50°) including jointing with rubber lubricant/cement solvent complete… 110 mm dia. |
| 50 | Providing and fixing on wall face SWRPVC soil waste and vent pipes including jointing with rubber lubricant/cement solvent complete…(b) 75mm dia. |
| 51 | Providing and fixing SWRPVC plain bend of required degree ( 87.50*) including jointing with rubber lubricant/cement solvent complete…(b) 75mm dia. |
| 52 | Providing and fixing single equal SWRPVC plain junction of required degree ( T-Junctionb)) (b) 75x75x75mm |
| 53 | Providing and fixing factory made P.V.C. door frame made of PVC extruded section (Chaukhat) having overall dimension of 48x40mm (tolerance +1 mm) with wall thickness 2.0 mm + 0.2 mm, corners of the door frames to be mitred and joined by means of plastic/M.S.galvanised brackets and stainless steel screws.The hinge side vertical of the frames reinforced by galvanised M.S. tube of size 19x19 mm and 1 mm+ 0.1 mm wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-Charge.(Sintex,Plasopan or equivalent): |
| 54 | Factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (+ 0.20mm) with inbuilt edging on both sides .The styles and rails mitred and joint at the corners by means of M.S.galvanised/ plastic brackets of side 75x220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting gavanised M.S. tube of size 20x20 mm and 1 mm ( (= 0.1 mm) wall thickness.The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (+ 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S.'U' cleats.The shutter frame filled with a u PVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20 mm and 1 mm(+ 0.1 mm) wall thickness. the panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers,complete as per manufacturees specification and direction of Engineer-in -charge.(For W.C. and bathroom door shutter).(Sintex,Plasopan or equivalent) (b) 30 mm thick shutter |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Enigineer in Charge. Internal work-Exposed on wall (a) 15mm dia nominal bore |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Enigineer in Charge. (b) 25mm dia nominal bore |
| 57 | Making connection of CPVC pipes distribution branch by providing and fixing equal Tee with jointing,testing complete including cutting and making good etc. |
| 58 | (a) 15mm dia nominal bore |
| 59 | (c) 25mm dia nominal bore |
| 60 | Making connection of Astral CPVC pipes distribution branch by providing and fixing brass FPT Tee with jointing,testing complete including cutting and making good etc. |
| 61 | (c) 25x25x15mm |
| 62 | Making connection of CPVC pipes distribution branch by providing and fixing Elbow 90* with jointing,testing complete including cutting and making good etc. |
| 63 | (a) 15mm dia nominal bore |
| 64 | (c) 25mm dia nominal bore |
| 65 | Making connection of CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing,testing complete including cutting and making good etc. |
| 66 | (a) 15mm dia nominal bore |
| 67 | (c) 25mm dia nominal bore |
| 68 | Making connection of CPVC pipes distribution branch by providing and fixing Reducer coupling with jointing,testing complete including cutting and making good etc. |
| 69 | (b) 20 x 15mm |
| 70 | Providing and fixing CPVC Ball valve / Gloobe/Stop & waste valve/Boiler drain etc.Complete |
| 71 | (c) 25 mm |
| 72 | Providing and fixing brass bib cock of approved quality ( a ) 15mm nominal bore. |
| 73 | Providing and fixing C.P. brass stop cock (concealed) of standard design and approved make conforming to IS:8931 ( c ) 15mm nominal bore. Class-I |
| 74 | Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and qeyser points of approved quality conforming to IS:8931 ( c ) Class-I |
| 75 | Providing and fixing chromium plated brass long neck pillar cock of approved quality (a )15mm nominal bore - Classik |
| 76 | Applying priming coat with ready mixed primer of approved brand and manufacturer on plaster surface (a).ready mix white primer |
| 77 | Polishing on wood work with ready made superior quality wax polish of approved brand and manufacture on new work. |
| 78 | Finishing walls with exterior emulsion of required shade on new work (three or more coat) to give an even shade… Premium exterior emulsion like weather shield,weather cote etc. |
| 79 | Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coat) to give an even shade …(b) Premium interior emulsion like velvet touch luxol silk etc |
| 80 | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvcanised iron/ steel works |
| 81 | Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats) (a) General quality |
| 82 | Diluting and injecting chemical emulsion for post constructional anti termite treatment with Chlorpyriphos/Lindane emulsifiable chemical 20% with 1% concentration (c). Treatment of soil under existing floor using chemical emulsion @ 1 litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender