Tender For Procurement Of 2Nos. Cable Releasing, Measuring & Cutting Unit, 2 Nos. Cable Storage Racks And Conversion Of Bond Stores-4 Into Electrical Cable Storage Facility

Sharing tender

Tender for Procurement Of 2Nos. Cable Releasing, Measuring & Cutting Unit, 2 Nos. Cable Storage Racks And Conversion Of Bond Stores-4 Into Electrical Cable Storage Facility , Crmc & Racks , Power Cable Releasing & Measuring Cut Of Unit: - 2.5 Sq Mm 4 Core Cable To 50 Sq Mm 4 Core Cable Wooden Drums Drive Unit, Drum Size (Minimum) 650 Mm And 1250 Mm (Maximum) (X Operations), Wooden Drum Jaws 70Mm To 120Mm, Drive Jaws Settings, Cable Trolley Units, Digital Measuring Auto Counting Unit, Auto Sensors, Left & Right, Bearing Channel Guide Unit, Cable Counter Roller Unit, Cable Drum Weight Maximum 2486 KgS Drive Load, Auto Cut Off Unit, Pneumatic Or Hydraulic, Control Drive System, Dual Side Operation, Auto Control Panel Etc. As Per Technical Specifications Enclosed , Design, Fabrication & Supply Of Cable Storage Ms Rack As Per Drawing & Technical Specifications Enclosed. , Installation, Erection & Fitment Charges For Above Crmc & Racks As Per Technical Specifications Enclosed , Conversion Of Bond Store-4 Into A Crmc Facility , Apply Two Coats Of Premium Quality Arcylic Emulsion Paint Of Interior Grade Of Approved Brand Like Asian Paints (Royal Shine) / Berger (Silky Luxury) And Manufacture, Including Applying Additional Costs Wherever Required To Achieve Even Shade And Colour. Where Ever Specified By Engineer Including Necessary Scaffolding And Staging Where Ever Required Etc., Complete. , Providing Floor Paint In Two Or More Coats Over A Coat Of Primer Of Approved Make Indigo / Asian / Berger Of Approved Colour To Be Finalized At The Time Of Execution In Existing Industrial Concrete Floor Surface Including The Cleaning / Preparation Of Surface And Take Up The Patch Repair Works Of The Existing Flooring Etc., Complete All As Directed. , Providing Two(2) Coats Of Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade For Crane Girders, Columns Etc., After Thorough Cleaning & Scrapping Over A Coat Of Red Oxide Complete All As Directed. , Providing And Fixing Anodized Extruded Aluminium Partitions With Frame 65 X 40 Mm With Suitable Door, Part Pannelled And Part Glazed With Acp Panel Sheets / Pre-Laminated Flat Pressed Particle Board Thickness Not Less Than 10Mm (Novapan, Ecoboard Etc) Of Approved Colour & Make. Aluminium Sections Shall Be Powder Coated With Approved Colour Of 50 Microns Conforming To Is:1948, Fabricated From Extruded Sections Of Indal / Jindal Or Approved Equivalent Make Having Minimum 1.5 Mm Wall Thickness As Per Is:1285, Is:733. Glazing Shall Be Frosted / Clear Float Glass (As Per User Requirement) Of 5 Mm Thickness Of Approved Make Saintgobin / Modifloat Including Sanp Fit Type Beading, Concealed Screws, Fixtures (Like Tower Bolts, Hold Fast, Handles Both Sides, Door Stoppers With Rubber Shoes, Ldrops, Stays Etc) With Godrej Lokcing Arrangement For Doors Including Cost Of Pvc / Neoprene Gasket Fits All Complete With Necessary Fillingup Of Gaps At The Junctions, At Top, Bottom And Sides Etc., Complete. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required. (Overall Dimesinons Will Be Measured For Payment) , Providing & Fixing Premium Quality Vitrified Tiles (Double Charged) (On Existing Flooring Including Hacking Of Surface) Of Size 600X600mm 9Mm ± 1Mm Thickness As Per Market In Floors Conforming To Is 15622 Of Approved Make Kajaria / Cera / Rak / Johnson In All Colours And Shades Laid On 20Mm Thick Cement Mortar (1:4) (1 Cement : 4 Coarse Sand) In Spacing Of 2Mm By Using Spacebars Or Lugs And Providing Matching Epoxy Pigment Of Myk Laticrete / Roff / Saint Gobain To Maintain The Level Including Required Materials Etc., Complete All As Directed. , Demolishing Of Rr/ Pcc/ Rcc/ Brick Wall In Cement Mortar By Manually / Mechanical Means Including Stacking Of Serviceable Material & Handing Over Of Useful Materials To Scrapyard / Ycm Civil R&M Section And Disposal Of Unserviceable Materials With In A 100M Lead Etc., Complete All As Directed By Hsl , Drain Cleaning, Removal Of Vegetation, Silt And All Types Of Rubbish From Drain And Complete All Work As Directed By Engineer In Charge. Disposal Of Same Outside Hsl. , Providing And Laying Reinforced Cement Concrete Work In Nominal Mix Of 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii):3 Graded Stone Aggregate 20Mm Nominal Size), Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement And Including Cost Of Cement (Opc 53 Grade- Ultratech, Acc, Nagarjuna & Kcp) And All Materials & Men Etc., Complete. , Supply And Providing Hysd Bar Reinforcement Of Fe-500 Grade Of Approved Make Sail / Rinl / Tisco / Kamache Including Transportation, Straightning, Cutting, Bending And Binding With Annealed Binding Wire Of 18 Gauge (1.22Mm Dia) Complete All Labour And Material Etc., Complete All As Directed , Providing Plain Cement Concrete 1:2:4 Nominal Mix Using 20 Mm Graded Crushed Granite Aggregate Including Mixing, Depositing In Position, Tampering, Finishing, Curing Including All Materials & Labbour Etc., Complete All As Directed. , Providing Water Proof Ms / Wooden Centering And Shuttering Including Strutting, Propping For Foundations, Footings, Bases For Columns Wherever Specified Etc., Including Removal Of Form Work Complete All As Directed. , Fabricating And Errecting Of Structural Steel By Straightning, Cutting, Welding Using Departmental Supplied All Types Of Steel Sections Such As Plates Etc Of Any Size Including Cutting, Errecting, In Postion To Line And Level By Welding, Applying One Coat Of Zinc Primer, Hire Charges For Tools And Plants Other Incidental And All Consumebals Etc. Complete All As Directed By Engineer Incharge. Note: Weight Shall Be Measured As Per Actual Weight Of Material Consumed At Site (Steel Issued Free By Hsl But Loading And Unloading Is In Contractor Scope) , Repairing And Servicing Of Steel Sliding/Rolling Doors By Replacing Worn-Out Rollers, Removing Damaged Or Old Gi Sheets In Position Including Cutting, Trimming, Replacing With New Gi Sheet Of 2Mm Thick And Securing By Welding Or Riveting As Directed. Scope Includes Through Surface Preperation, Applying One Coat Of Red Oxide Paint, And Finishing With Two Coats Of Aluminium Paint To All Exposed Metal Surfaces. Complete All As Directed By The Engineer Incharge.