Tender For Upgradation Of Infrastructure Of Directorate Of Handicrafts And Handloom Kashmir.
Tender Value
31.26 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
4 days left
EMD
62520
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Infrastructure Of Directorate Of Handicrafts And Handloom Kashmir.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees, and saplings of girth up to 30 cm including removal of rubbish and disposal of the same outside the periphery of the area cleared By labours as directed by the Engineer-in-Charge. |
| 2 | BATH ROOMS FITTINGS & REPAIR a) Dismantling tile work in floors and walls laid in cement mortar including stacking material as directed at site of work |
| 3 | Engagement of Labour for Dismantling and removing old Galvanized Iron (GI) pipelines of any diameter, including all connected fittings, valves, clamps, and brackets. Scope includes isolating the supply, draining residual fluids, carefully loosening joints or cutting sections where necessary, neatly stacking reusable materials, and clearing away unserviceable debris from the site as directed by the Engineer-in-Charge.\\" |
| 4 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 5 | Dismantling of flushing cistern of all types (C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials as directed at site |
| 6 | Engagement of Labour for Dismantling existing Polyvinyl Chloride (PVC), uPVC, or CPVC water/drainage pipelines of any diameter, including all connected fittings pipe clamps, brackets, and wall clips. complete as per the direction of the Engineer-in-Charge.\\" |
| 7 | \\"Providing and executing a two-component polymer-modified cementitious waterproofing system for internal sunken portions. The item includes cleaning the raw sunken slab, treating the pipe penetrations (bore packing) with non-shrink grout, and extending the coating up the vertical brick walls to a minimum height of 300mm above finished floor level. The application comprises two heavy coats, testing for leaks over 24 hours, and covering with a protective plaster screed prior to tile fixing.\\" |
| 8 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchargeInternalwork Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm/25mm OD(SDR-7.4),i/c all necessary fittings and fixtures ,complete job |
| 9 | Providing and fixing PPR UnionsPPR Union 32mm |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 11 | Providing and fixing soil, waste and vent PVC pipes: Including all necesarry fittings like cowl bends/D-bends and other and fixtures. B type 75 mm Dia |
| 12 | 100 mm Dia |
| 13 | P Trap |
| 14 | S Trap |
| 15 | Providing and fixing of Cp grating 100mm dia. |
| 16 | Providing and fixing 15 mm nominal bore C.P. brass bib cock & Angle cocks of approved quality conforming to IS : 8931 |
| 17 | Providing, installing, testing, and commissioning of a wall-mounted single-lever hot and cold water bath mixer of approved quality |
| 18 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 19 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 20 | P/f of pipes including cost of unions , sockets etc 25mm nominal bore OF approved brand and manufacture. |
| 21 | Providing and fixing health faucet with 8mm dia 1.2 mtr long flexible tube and wall hook , with N.R.V of approved brand and manufacture , |
| 22 | 15 mm thick cement plaster on rough side of single or half brick wall in (1 cement: 6 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 23 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 25 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/1Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture. (doors, windows, ceiling & eves boarding) |
| 26 | Providing and fixing of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mmx 65 mm in sections or as required at site). including cost of necessary adhesive & cost of nails etc. Complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 27 | Polishing on wood work with ready mixed French spirit polish of approved brand and manufacture incl. coat of wood filler on New work |
| 28 | Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all respects upto floor five level (2 mm thick) |
| 29 | Grinding, Polishing the marble/granite, Stone work outside, vitrified floor surfaces including necessary colouring etc. to make the existing floors functional including disposal of the rubbish and other wastes etc. all as per directions of Engineer-in-charge |
| 30 | Earth work in excavation in trenches for foundation with required depth including removal of excavated soil/slush etc. ,dressing of bed and sides ,dewatering (if any) of trenches till construction upto ground level is achieved and disposal of excavated soil as directed by the Engineer incharge including all leads ,lifts and Carriage by mechanical means as required complete. (For All kinds of soils) |
| 31 | Providing and laying stone soling tightly hand packed under foundations, footings ,floors etc. including carriages of materials from source to site of work complete in all respects. |
| 32 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level including all carriages a) 1:4:8( 1 cement: 4 coarse sand: 8 graded stone agg/ 40mm nominal size) crushed aggregate) |
| 33 | b) 1:3: 6( 1 cement: 3 coarse sand: 6 graded stone agg/ 20mm nominal size) crushed aggregate) for mass concrete works. |
| 34 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) including loading, unloading and all carriages upto site of work |
| 35 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment)(Screened through sieve of I.S. designation 16 mm) |
| 36 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately) |
| 37 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) |
| 38 | Providing and fixing under-counter kitchen cabinets (boxing) using 18mm thick BWP (Boiling Water Proof) plywood for sides, bottom, and partitions. Backing to be 6mm thick BWP plywood. All exposed edges to be sealed with 2mm thick PVC edge banding tape using hot-melt glue. Internal surfaces to be finished with 0.8mm thick laminate. Item includes all necessary hardware like SS hinges, screws, and adhesives, complete as per architectural |
| 39 | Dismantling and stripping away existing worn-out or damaged asphalt shingle roofing from timber or concrete decking at any height or roof pitch. Scope includes removing all rows of shingles, pulling out embedded roofing nails, fasteners, starter strips, and ridge caps. It also covers removing the weathered waterproof underlayment (tar paper/felt), cutting back damaged metal valley flashings, drip edges, and carefully clearing, lowering, and disposing of all non-combustible bituminous debris (malba) away from the site, complete as per the direction of the Engineer-in-Charge.\\" |
| 40 | Providing and fixing high rib tile profile sheet roofing 0.50mm thick of approved make and specifiication as per architeectural design complete in all respect. |
| 41 | SITC of Ceiling Fan,Capacitor type suitable for low voltage operation including wiring the down rods of standard length(Upto 30 cm)with 1.5 sq.mm FR PVC insulated, copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required. |
| 42 | Supply,Installation,Testing and Commissioning of AC 230/250 Volts, 50 Hz exhaust fan with louveres of 225 mm Size including connection etc. complete as required . |
| 43 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ( For Steel Gate (Ornamental) as per the approved design by consultant/Engineer Incharge including cost of necessary hold fasts and moving wheels , rails as required all complete as per the directions of consultant/Site Engineer.) |
| 44 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete |
| 45 | Design, fabrication, supply, structural installation, testing, and commissioning of a heavy-duty Main Entrance Gate overhead structural steel truss and integrated project/branding sign board. The overhead truss system shall be structurally engineered to span the clear gateway width, designed to withstand regional wind loads, and anchored into reinforced concrete (RCC) columns using high-tensile anchor bolts. The sign board shall be mounted onto the truss facade, utilizing an ACP (Aluminium Composite Panel) backing frame with custom exterior-grade acrylic/LED 3D backlit lettering or vinyl graphic overlay. Rate shall include all structural shop drawings, fabrication labor, alignment welding, hoisting cranes/machinery, scaffolding, electrical conduit routing for signage power, and protection during ongoing site works. Complete in all respects as per structural drawings, manufacturer specifications, and final approval of the Project Engineer-in-Charge.\\" a) Structural steel work in welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying of priming coat of approved steel primer complete in all respects..(All work at all levels complete.) |
| 46 | Providing and fixing Track deck crill make or equivalent H.I. rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 255 mm T.C.T(total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 no stiffing ribs, effective water shedding and special male/female ends with full return legs on side Lapps for purlins support and anti-capillary flute inside Lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms /sm) zinc/aluminum coating mass total on both sides AZ-150 as IS -1397 ,550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M.P over 5 micron polyester back coat over 5 micron primer coats on both surfaces including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end Lapps etc (.measured for unit of laid area) (0. 50 mm thickness ) |
| 47 | P/F of plain 0. 50 mm total thickness S.M.P. coated Galvalume steel for ridge, capping pieces at apex of sky lights/hips, valleys etc. including notching, turning down of edges of capping between ribs etc .complete(500 mm to 1000 mm) |
| 48 | Providing and fixing planed eves boarding of (300x40 mm nominal size) of Ist Class kail wood with necessary grooves and chamfer as per detailed drawing / as per the directions of Engineer Incharge |
| 49 | Finishing with Anti-corrosive zinc-chromate primer coating + 2 coats of exterior PU paint |
| 50 | P/F of 4mm Exterior-grade ACP sheet paneling with heavy aluminium backing frame |
| 51 | P/F of Custom 3D Acrylic backlit letters (approx. 30 letters, 24\\" height) |
| 52 | IP67 Waterproof LED modules, internal wiring, and weatherproof drivers |
| 53 | Providing Mobile scaffolding rental, setup, and safety netting for overhead works |
| 54 | Hydraulic hoisting crane rental (12-ton capacity, 1-day operation for erection) |
| 55 | P/F of PVC conduit routing, testing, final commissioning, and site work protection |
| 56 | Providing and fixing of PVC pipe B type incld bend, Tee, collar complete job |
| 57 | Providing and fixing of PVC Man holes having section 300mmx 300mm of standard quality complete job |
| 58 | Providing and fixing of PVC Man holes having section 450mmx 450mm of standard quality complete job |
| 59 | Dismantling existing wooden wardrobe or cupboard assembly including shutters, hardware, and disposal of debris. |
| 60 | Providing and fixing custom-built wooden wardrobes/cupboards consisting of a carcass, external shutters, and internal modules. The framework and internal partitions shall be constructed using 18mm thick Commercial/Waterproof (BWR/BWP grade) blockboard or plywood, with a 6mm thick matching plywood backing sheet. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender