Tender For Restoration Works At The Risk And Cost Of The Epc Contractor Through Short-Term Maintenance Contract (Stmc) In The State Of Tripura During Fy 2026-27, On Percentage-Rate And Work-Order Basis (3Rd Call), For The Following Road Stretches:I)
Tender Value
32.40 Crore
Estimated cost
Bid Submission
15 Oct 2026
1 days left
EMD
64.81 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Works At The Risk And Cost Of The Epc Contractor Through Short-Term Maintenance Contract (Stmc) In The State Of Tripura During Fy 2026-27, On Percentage-Rate And Work-Order Basis (3Rd Call), For The Following Road Stretches:I) Kailashahar-Khowai (Package-I): Kailashahar-Fultali Road Section Of Nh-208 From Km 21.100 To Km 29.200 (Length: 8.100 Km).Ii) Kailashahar-Khowai (Package-Iv): Bamanchara-Srir Ur Road Section Of Nh-208 From Km 63.700 To Km 75.700 (Length: 12.000 Km).Iii) Kailashahar-Khowai (Package-V): Srir Ur-Khowai Road Section Of Nh-208 From Km 75.700 To Km 101.300 (Length: 25.600 Km).Iv) Agartala-Khowai (Package-Ii): Mohanpur-Subal Singh Road Section Of Nh-108B From Km 19.300 To Km 31.300 (Length: 12.000 Km).
BOQ
| Sl. No. | Item Description |
| 1 | Kailashahar Khowai Pkg- 5 : Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanicalmix plant carriage of mixed Material by tipper to site, layingin uniform layers with paver finisher in sub- base / basecourse on well prepared surface and compacting withvibratory roller to achieve the desired density as perMoRT&H Technical Specification Clause 406. |
| 2 | Kailashahar Khowai Pkg- 5 : Dense Graded Bituminous MacadamProviding and laying dense graded bituminous macadamwith 100-120 TPH batch type HMP producing an averageoutput of 75 tonnes per hour using crushed aggregates ofspecified grading, premixed with bituminous binder @ 4.0to 4.5 per cent by weight of total mix and filler,transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to therequired grade, level and alignment, rolling with smoothwheeled, vibratory and tandem rollers to achieve thedesired compaction as per MoRT&H specification clauseNo. 505 complete in all respects, Grading II, With Viscosity Graded Bitumen of VG-30. |
| 3 | Kailashahar Khowai Pkg- 5 : Bituminous ConcreteProviding and laying bituminous concrete with higher capacitybatch type hot mix plant using crushed aggregates of specifiedgrading, premixed with bituminous binder @ 5.40 Percent of mixand filler, transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to the requiredgrade, level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction asper MORTH specification clause No. 507 complete in all respects, Grading II With Viscosity Graded Bitumen of VG-30. |
| 4 | Kailashahar Khowai Pkg- 5 : Providing and applying low viscosity bitumen emulsion forsealing cracks less than 3 mm wide or incipient fretting ordisintegration in an existing bituminous surfacing as perMoRT&H Technical Specification Clause 513. With blinding |
| 5 | Kailashahar Khowai Pkg- 5 : Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion pressure distributor at the rate of0.20 kg per sqm on the prepared bituminous / granularsurface cleaned with Hydraulic broom as per MoRT&HTechnical Specification Clause 503 |
| 6 | Kailashahar Khowai Pkg- 5 : Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular base includingcleaning of road surface and spraying primer at the rate of0.6 kg/sqm using mechanical means as per MoRT&HTechnical Specification Clause 502 |
| 7 | Kailashahar Khowai Pkg- 5 : Hiring of Majdoor (Skilled) (03 nos. for 04 months) |
| 8 | Kailashahar Khowai Pkg- 5 : Road marking strips (retro-reflective) of specified shade/colour using Hot Applied Thermoplastic material withReflectorising Glass Beads on Bituminous SurfaceProviding and applying 2.5 mm thick thick road markingstrips (retro-reflective) of specified shade/ colour using hotthermoplastic material including reflectorising glass beads@ 250 gms per sqm area by fully/ semi automaticthermoplastic paint applicator machine fitted with profileshoe, glass beads dispenser, propane tank heater andprofile shoe heater including cost of cleaning the roadsurface of all dirt, seals, oil, grease and foreign materialetc, thickness of 2.5 mm is exclusive of surface appliedglass beads as per IRC:35. The finished surface to be level,uniform and free from streaks and holes as per MoRT&HTechnical Specification Clause 803. |
| 9 | Agartala Khowai Pkg- 2 : Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanicalmix plant carriage of mixed Material by tipper to site, layingin uniform layers with paver finisher in sub- base / basecourse on well prepared surface and compacting withvibratory roller to achieve the desired density as perMoRT&H Technical Specification Clause 406. |
| 10 | Agartala Khowai Pkg- 2 : Filling Pot-holes and Patch Repairs with Bituminousconcrete, 40mm: Removal of all failed material, trimming of completedexcavation to provide firm vertical faces, cleaning ofsurface, painting of tack coat on the sides and base ofexcavation as per clause 503, back filling the pot holes withhot bituminous material as per clause 511, compacting,trimming and finishing the surface to form a smoothcontinuous surface, all as per MoRT&H technicalspecification Clause 3004.2. Grading-I (19 mm nominal Size) |
| 11 | Agartala Khowai Pkg- 2 : Hiring of water tanker 6 Kl capacity (Truck Mounted) (02 nos. for 03 months, Output taken as 10 Hr) |
| 12 | Agartala Khowai Pkg- 2 : Hiring of Mazdoor (Skilled) (03 nos. each day for 03 months) |
| 13 | Kailashahar Khowai Pkg- 4 :Wet Mix Macadam: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Technical Specification Clause 406. |
| 14 | Kailashahar Khowai Pkg- 4 : Prime Coat: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502 |
| 15 | Kailashahar Khowai Pkg- 4 : Tack Coat: Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503. |
| 16 | Kailashahar Khowai Pkg- 4 : Dense Graded Bituminous Macadam: Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.A. Grading I ( With Viscosity Graded Bitumen of VG-30) |
| 17 | Kailashahar Khowai Pkg- 4 : Bituminous Concrete: Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.B. Grading II (With Viscosity Graded Bitumen of VG-30) |
| 18 | Kailashahar Khowai Pkg- 4 : Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specific levels, grade and cross fall using Type A as per MoRT&H Technical Specifiaction Clause 511. |
| 19 | Kailashahar Khowai Pkg- 1 :Wet Mix Macadam: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Technical Specification Clause 406. |
| 20 | Kailashahar Khowai Pkg- 1 : Prime Coat: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502 |
| 21 | Kailashahar Khowai Pkg- 1 : Tack Coat: Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503. |
| 22 | Kailashahar Khowai Pkg- 1 : Dense Graded Bituminous Macadam: Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.A. Grading I ( With Viscosity Graded Bitumen of VG-40) |
| 23 | Kailashahar Khowai Pkg- 1 : Bituminous Concrete: Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.B. Grading II (With Viscosity Graded Bitumen of VG-40) |
| 24 | Kailashahar Khowai Pkg- 1 : Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specific levels, grade and cross fall using Type A as per MoRT&H Technical Specifiaction Clause 511. |
| 25 | Kailashahar Khowai Pkg- 1 : Hiring of Majdoor (Skilled) (03 nos. for 04 months) |
| 26 | Kailashahar Khowai Pkg- 1 : Road marking strips (retro-reflective) of specified shade/colour using Hot Applied Thermoplastic material with Reflectorising Glass Beads on Bituminous Surface Providing and applying 2.5 mm thick thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level,uniform and free from streaks and holes as per MoRT&H Technical Specification Clause 803. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender