Tender For Addition / Alteration In Plain Cement Concrete Ward A Block At Mh Meerut Under Ge (U) Meerut Cantt
Tender Value
9.61 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
9 days left
EMD
19250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration In Plain Cement Concrete Ward A Block At Mh Meerut Under Ge (U) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in Soft/loose soil complete all as specified and directed. |
| 2 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed. |
| 3 | Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 4 | M&L Plain Cement concrete 1:4:8 Type D-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M&L brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 6 | M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 7 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :- W P C shall be measured and paid separately. |
| 8 | M&L for applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. |
| 9 | M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified as directed by engr-in-charge. |
| 10 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 11 | M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed. |
| 12 | M & L Non - skid Ceramic tiles Coloured 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 13 | M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed. |
| 14 | S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.(Gde Fe-410w(gde-E 250 Quality -A) complete all as specified and directed. |
| 15 | M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing complete all as specified. |
| 16 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as etc complete all as specified and directed. |
| 17 | S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 complete all as specified and directed. |
| 18 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item complete all as specified and as directed. |
| 19 | S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 20 | S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed. |
| 21 | S & F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and directed. |
| 22 | S & F 150mm long aluminium anodised cast type alumiinium handle SI marked complete all as specified and directed. |
| 23 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and directed. |
| 24 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed. |
| 25 | S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore complete all as specified and directed. |
| 26 | S&F in repair Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs complete all as specified and directed. |
| 27 | S&F PVC valveless,10 liters syphonic action cistern, low level, white, with inlet, ball valve, float and including brakets and connection to pipes complete all as specified and directed. |
| 28 | S & F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed complete all as specified and directed. |
| 29 | S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls, complete all as speicified and directed. |
| 30 | S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts fixed complete all as specified and directed. |
| 31 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 32 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 33 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified and directed. |
| 34 | S&F 110 mm PCV (SWR) junction double , (double T)equal or unequal complete all as specified and directed. |
| 35 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified and directed. |
| 36 | S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 37 | S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 38 | S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165 complete all as specified and directed. |
| 39 | S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I complete all as specified and directed. |
| 40 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complte all as specified and directed. |
| 41 | S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water complete all as specified and directed. |
| 42 | S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water complete all as specified and directed. |
| 43 | S&F 25mm PPR Gate valve inserted as per requirement of site complete all as specified and directed. |
| 44 | S&F CP basin mixer for hot & cold water supply and fixed complete all as specified and directed. |
| 45 | S&F Vitreous china wash basin 600mmx450mm including waste pipe, coupling and brackets etc complete all as specified and directed. |
| 46 | M & L 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 47 | M&L LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 10 users complete all as specified as per manufactures instructions. |
| 48 | M&L Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia and 3m depth complete all as specified and directed as per TD drawing No TD-309 Sheet 1/4 to 4/4. |
| 49 | S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 50 | M& L 4mm thick board/ tiles for E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping complete all as specified and directed. |
| 51 | S&F 50 micron powder coated aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf,powder coated aluminium fancy extruded section 200mm long handle-01 No per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf,powder coated aluminium body hydraulic door closer 01 No per leaf of suitable capapcity, floor door stopper of powder coated aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed. |
| 52 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall Sqm thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (122mm x 54mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 53 | S&F in Repair for Providing and fixing anodised aluminium partition work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom (half portion) and sides with required 12 mm thick EPDM board with rubber/ neoprene gasket and top of half portion with 5.0 mm thick glass with Aluminium snap beading for glazing/ paneling etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, , C.P. brass/ stainless steel screws, all complete as and the directed.including taking out old partion All as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender