Tender For special Repair To Jcos Ward (Bldg No P-47) With Connected Service At Dinjan Mill Stn
Tender Value
35.90 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
13 days left
EMD
71800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Jcos Ward (Bldg No P-47) With Connected Service At Dinjan Mill Stn
BOQ
| Sl. No. | Item Description |
| 1 | B/R WORKS :Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 but n. exc. 4 sqm and refixing in same opening each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified and directed. |
| 3 | S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 4 | S&F for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 5 | M&L for painting steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed |
| 6 | S&F 35 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 7 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed. |
| 8 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR 2009 Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 9 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 10 | S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 11 | S&F for anodised aluminium door shutter frame work fabricated by using medium grade, Jindal Make box sections as per drgs. Door/partition panels shall be 8 mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories. etc complete all as specified and as directed.TD drawing CESZ/2015/TD-005 |
| 12 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 13 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 14 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and as directed. |
| 15 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed |
| 16 | S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed |
| 17 | M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 18 | S&F 150mm size, aluminium anodised handle, fabricated type complete all as specified and directed. |
| 19 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 20 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed. |
| 21 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | S&F Non- skid Ceramic coloued tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15mm thick screed layer in CM 1:6 cementr to match complete all as specified and directed. |
| 23 | S&F Non- skid Ceramic coloued tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10 mm thick screed layer in CM 1:3 cementr to match complete all as specified and directed. |
| 24 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over annd incl 15mm tthick screed layer in CM 1:4 complete all as specified and directed. |
| 25 | M&L Glazed ceramic tiles in vertical surface 350x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles over and incl sccrreed layer in CM 1:3 complete all as specified and directed. |
| 26 | S&F in repairs Vitreous china wash basin, white flat back, size 550mm x 400mm with brackets, excluding pillars cock 15mm bore CP, PVC connection of 450mm long including PVC (HDPE) 32mm bore waste pipe, brass couplings 32mm CP etc complete all as specified and directed. |
| 27 | S&F 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 28 | S&F in repairs 600 x 450mm beveled edged mirror or selected quality glass mounted on 6mm thick AC building board or commercisl plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed. |
| 29 | S&F in repairs, stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bhoth ends for iron pipe or for unions complete all as specified and directed. |
| 30 | S&F in repairs 15mm bore PVC connection pipe 450mm longh with PTMT nuts at both ends complete all as specified and directed. |
| 31 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) with seat cover white with 'P' or 'S' trap, including and flushing pipe etc complete including making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing specifications as specified (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 32 | S&F for Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 33 | S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet. Ball valve, float bracket & flush pipe complete all as specified and directed. |
| 34 | S&F in repairs 15mm bore Bib Taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwex for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 35 | Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 36 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 37 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete all as specified and directed. |
| 38 | S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and directed. |
| 39 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 40 | S&F in repairs, PVC (SWR) junction, single T equal or unequal 110mm bore complete all as specified and directed. |
| 41 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap ,plain with grating including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4 complete all as specified and directed. |
| 42 | S&F in repairs, 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 43 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 44 | S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45ms) complete all as specified and directed. |
| 45 | Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 46 | S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed |
| 47 | Taking up or down 20 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 48 | S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 49 | S&F for Shower arm with 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms complete all as specified and directed. |
| 50 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 51 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 52 | S&F in repairs, Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 53 | S&F health faucet hose and hook complete all as specified and as directed. |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 55 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incljuding fabrication etc complete all as specified and directed. |
| 56 | Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches, pillars etc complete all as specified and as directed |
| 57 | M & L old size brickwork with sub-class 'B' bricks old size well burnt ,straight or curved on plan to any radius in half brick thick walls built in , built in CM 1:4 and complete all as specified and as directd. |
| 58 | M&L Old size brickworklass 'B' bricks old size well burnt, straight or curved on plan exc 6m mean radius,built in CM 1:4 and complete all as specified and as directed. |
| 59 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 60 | M&L for rendering 10mm thick on fair face of brick works or concrete surfaces of walls with CM (1:4) anf finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L for preparation newly plaster surfaces of wall, chajja facia etc with putty 1-2mm thick and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 63 | M&L for Complete removal of existing treatment and treating from walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface even and smooth complete all as specified and directed |
| 64 | M&L for preparing of new plastered surfaces of walls & applying plaster of paris putty of 3 mm thickness over plastered surface to prepare the surface even and smooth etc and applying two coats of oil bound distemper over onne coat of primer etc complete all as specified and directed. |
| 65 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down, stopping nail holes, fillings cracks with putty etc and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 66 | M&L for preparation of old surfaces of ceiling and applying one coats of white wash etc complete all as specified and directed. |
| 67 | S&F curtain rails, mild steel, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 68 | S&F for powder coated aluminium three track sliding window (minimum thickness of powder coating 50 micron) including following components/specifications complete all as specified and as directed. (i) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing.(ii) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members.(iii) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc.(iv) Sheet glass 5 mm thick selected quality(v) Stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc.(vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5. |
| 69 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 70 | S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 71 | Dismantling water tanks and removing to store Exc 500 & n.exc 1000 Ltrs complete all as specified and directed. |
| 72 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 73 | S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 74 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 75 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust complete all as specified and directed. |
| 76 | M&L for Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per Sq. m. per coat complete all as specified and directed. |
| 77 | S&F for APP based polymeric membrane minimum weighing 3Kg/sam and minimum 3mm thick reinforced with polyster non wove fabric (wt, not less than 150 gms/sqm) land on primed surfacfe by forced application complete all as specified and directed. |
| 78 | M&L for 25mm thick cement concrete B-0, 1:2:4 (12.5mm graded aggregate) finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 79 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 80 | M & L PCC 1:3:6 type C-2 (50 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cement making joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 81 | M&L of Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains complete all as specified and directed. |
| 82 | M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 83 | M&L RCC 1:2:4 type B-1 precast concrete as in cover slab set in CM (1:4) including necessary form work complete all as specified and as directed. |
| 84 | S&F Floor door stopper (Overall length of cover plate 140 mm) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 85 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 86 | S&F for Parryware Corner shelf complete all as specified and directed. |
| 87 | S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed. |
| 88 | Supply only water proofing compound for external plaster. complete all as specified and directed. |
| 89 | E/M WORKS :Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed. |
| 90 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. |
| 91 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair complete all as specified and directed. Please Enable Macros to View BoQ information |
| 92 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender