Tender For special Repair Of 03 X Washroom At Bldg No P-90(Office Complex) Of Hq Inf Div, Special Repair To Roof Treatment Of Samadhan Bldg Of Hq Inf Div And Provn Of Drainage Near Or Living A/4/138, A/4/139, A/4/140 And A/4/141 Of Hq Inf Div, Def &
Tender Value
43.62 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
18 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of 03 X Washroom At Bldg No P-90(Office Complex) Of Hq Inf Div, Special Repair To Roof Treatment Of Samadhan Bldg Of Hq Inf Div And Provn Of Drainage Near Or Living A/4/138, A/4/139, A/4/140 And A/4/141 Of Hq Inf Div, Def & Emp Coy At Pms Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in CM including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of the rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (un reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground (level) and lowering if necessary, removal of the rubbish off the premises complete all as specified and directed. |
| 3 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Excavating over areas, n exc 1.5 m deep and getting out and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Excavating in post holes ( or similar holes) each n.exc 0.5 cum getting out , and removing surplus soil to a distance n.exc 50m and making good surface, in soft/loose soil complete all as specified and directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed |
| 7 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed. |
| 8 | M&L for PCC 1:3:6, type C2, using 40 mm graded aggregate as in post holes, filling and mass concrete all as specified and directed. |
| 9 | M&L for Hardcore of broken stone or boulders of gauge nexc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 10 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified & directed. |
| 11 | M&L for RCC 1:1.5:3 type A1 (20 mm graded crushed stone aggregate) nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete as directed. |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed. |
| 13 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L for mild steel TMT bar 6 to 8mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed by Engineer in Charge. |
| 15 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including conforming to IS.1161 - 2014, Fe-410- W(Gde- E-250) quality- B, bent to a curve complete all as specified and directed. |
| 16 | S&F Rolled mild steel Fe-410-W(Gde-E-250) quality B for Joist, channel, angle, or tee sections, fixed in post as in specified and as directed |
| 17 | S&F MS Plates plain, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe-410- W(Gde-250) quality-B complete all as specified and directed. |
| 18 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed |
| 19 | S&F Chimney bars (straight or camber); bearing bars; ton-gues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc., & similar articles conforming to Fe 290-0 Gde E-165 complete all as specified and as directed. |
| 20 | M&L for Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed. |
| 21 | M&L for Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and smooth complete all as specified and directed. |
| 23 | M & L for rendering 15 mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces of wall including finished fair and even complete all as specified and as directed. |
| 24 | M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished fair and even complete all as specified and as directed. |
| 25 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 26 | S&F Powder coated aluminium (miimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge |
| 27 | S&F Sheet glass 4 mm thick, ordinary frosted quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 28 | S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing complete all as specified and as directed. |
| 29 | S&F Factory made solid moulded PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face with particle face supply & fixing on frame, as per specification & drawing complete all as specified and as directed. |
| 30 | S&F stainless steel Butt hinges 100mm size, medium weight, complete all as specified and as directed. |
| 31 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 32 | S&F extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and as directed. |
| 33 | M&L for 100mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate in sub base of floor/paving etc complete all as specified and directed. |
| 34 | M&L 40 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed. |
| 35 | S&F Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed or bedding layer 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified and as directed. complete all as specified and directed. |
| 36 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including rendering 10 mm thick in Cement Mortar (1:3) complete all as specified and as directed. all complete all as specified and directed. |
| 37 | M&L for Green marble work 15 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following typesnt with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15mm thick Screed bed or backing coat for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 38 | M&L for 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:6 complete all as spd and directed. |
| 39 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 15 mm bore pipe complete including stacking aside for recomplete all as specified and directed.complete. |
| 40 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 20 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. |
| 41 | S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 42 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 43 | Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed. |
| 44 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and as directed. |
| 45 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 46 | S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed. |
| 47 | S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and as directed. |
| 48 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. |
| 49 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. |
| 50 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 51 | S&F in repair soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and as directed. |
| 52 | S & F in repairs Vitreous China Urinal half stall of size 320 x 300 x 525 mm, compact design, zero-contact\\" hygienic layout with integrated Electronic Flushing System - AC Powered , ivory / snow white including providing fixing plugs bedding urinal against wall , and all other fixtures etc all as specified and directed . |
| 53 | S&F in repair Ivory table top wash basins of size 550 x 400 x 160 mm all as specified and as directed. |
| 54 | S&F in repair Paper Holder with Flap Recessed Type (Stainless Steel) all as specified and as directed. |
| 55 | S&F in repairs 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 56 | Supply and fixed in repairs floor mounted (single piece WC) bowl with cistern for coupled WC with and including UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set complete of size 380x655x765 mm with S Trap- 250 mm, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 57 | S&F in repair Deck mounted high neck sensor tap for table top wash basin Pillar taps screwed down high pressure, complete all as specified and as directed. |
| 58 | S&F in repairs two way bib cock 15 mm chromium plated complete all as specified and directed. |
| 59 | S&F in repair for toilet jet spray stainless steel grade-304 triangle nozzle with 2 feet tube including making connections and fixed in position complete all as specified and directed. |
| 60 | S & F in repair curved Urinal partition of size 900 x 450 mm of thickness 10mm all as specified and as directed. |
| 61 | S&F in repair SS Towel rack 600mm (24\\") complete all as specified and directed. |
| 62 | S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified including 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screws complete all as sprcified and as directed |
| 63 | M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 64 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 65 | M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement for roof surfaces complete all as specified and as directed. |
| 66 | Material and labour for rendering 5 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 67 | M&L for Water Proofing treatment comprising of the following course of teatment and as diected a) Surface Preparation - Mild Chipping of the surface, Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler. b) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT. c) Applytwo coat Nano carbon fiber based Nano Bond coat (base4: hardner 1) ratio d) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat. |
| 68 | M&L for Machine pressed precast concrete interlocking paver block, pre-polished (coloured) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and as directed. |
| 69 | M&L PCC 1:3:6 type C1 with using 20mm graded agregate as in surface channel and drain etc complete all as specified and directed. |
| 70 | M&L for forming fair finished drain or channel of manholes inner girth 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed. |
| 71 | M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified & directed |
| 72 | M&L for providing RCC precast cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed |
| 73 | M&L for Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and directed. |
| 74 | S & F 110mm bore PVC (SWR) pipes, type B single socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete all as specified and as directed. |
| 75 | Taking down carefully aluminium conductor/Copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
| 76 | Taking down carefully aluminium conductor/Copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender