Tender For Provision Of Chequered Tiling Of Bldg No P 4/3 At 15 Bengal Bn Ncc, Extn Of Height Of Boundary Wall For Bldg No P-4/2 For Security Of Unit Magazine & Jcos Accn At 15 Bengal Bn Ncc, Suri And Provn Of Pathway From 31 Fad Gate To 17 Corps Pro
Tender Value
48.84 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
15 days left
EMD
97700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Chequered Tiling Of Bldg No P 4/3 At 15 Bengal Bn Ncc, Extn Of Height Of Boundary Wall For Bldg No P-4/2 For Security Of Unit Magazine & Jcos Accn At 15 Bengal Bn Ncc, Suri And Provn Of Pathway From 31 Fad Gate To 17 Corps Provost Unit Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas in soft/loose soil, n exc 1.5 m deep and getting out, complete all as specified and as directed. |
| 2 | Removing excavated material in soft/loose soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed. |
| 3 | M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge. |
| 4 | M&L for Hardcore using Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed. |
| 5 | M & L for PCC (1:4:8) Type D2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed. |
| 6 | M&L for Plain cement concrete of type B1, 1:2:4 (20mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed |
| 7 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 8 | M&L Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed. |
| 9 | M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed.. |
| 10 | M&L for RCC 1:1.5:3 type A1 (20 mm graded crushed stone aggregate) nominal mix as in slabs supported on walls, beams and columns, in roofs and in shelves and the like, complete all as specified and as directed. |
| 11 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 12 | Mild TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 13 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for fair finished surface of concrete, all as specified and as directed. |
| 14 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface of concrete, complete all as specified and directed. |
| 15 | S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed. |
| 16 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, stapled or steel pins etcas directed ( each line of wire to be measured). |
| 17 | M&L for 150mm thick Cement concrete type D2 1:4:8 (40 mm graded stone aggregate) as in pavings, complete all as specified and as directed. |
| 18 | Material & Labour for 50mm sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 19 | Material & Labour for pre polished factory made precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & no pigment complete all as specified and directed. |
| 20 | M&L for out door Vitrified parking tile of size 40 x 40 cmx 8-10 mm thick of approved size,set, jointed and pointed using with grey cement and pigment in floor,pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick sreed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 22 | Supplying and laying of PVC underground drainage sewer system pipe bearing 100 mm dia SN 4 including jointing with couplar, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. |
| 23 | M & L for cement concrete 1:3:6, Type C-1 (Using 20 mm graded stone aggregates) in surface channlels and drains complete all as specified and directed. |
| 24 | M&L for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for preparing old decorated plastered or unplasterd surfaces of walls by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper, rectifying minor cracks and undulations using Acrylic Wall Putty and primer to achieve a smooth, even surface. and applying two coat of cement base paint complete all as specified and as directed. |
| 27 | Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified and as directed. |
| 28 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 29 | Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each and fixing the same in same opening after necessary easing and adjusting complete necessary repairs required as on ground complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender