Tender For Special Repair To Wiring To Bldg No. T-23 And T-24 Of Manjakote Garrison Under Age(I) Palma .
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
15 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Wiring To Bldg No. T-23 And T-24 Of Manjakote Garrison Under Age(I) Palma .
BOQ
| Sl. No. | Item Description |
| 1 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete |
| 2 | Material and labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade drawn in and including PVC casing and capping of size 25/30/32 mm fixed to wall ceiling including PVC closed recessed boxes ISI marked with 3.00 mm thick plastic laminated sheet top cover or cover plate of modular complete for mounting of switches, sockets etc incl 1.50 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade single core earth continuity conductor connected to common earth dolly all as directed and specified for the followings. |
| 3 | One light /fan point controled by one 5/6 Amp modular type switch |
| 4 | One 3 pin socket outlet 5 Amps on same board. |
| 5 | One 3 pin socket outlet 5 Amps on indpendent board |
| 6 | All as per item No 2 here in before but point wiring with 2.5 sqmm FR multi stranded copper conductor cable for main circuit and 2.5 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board, complete all as specified and directed. |
| 7 | Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed. |
| 8 | Supply and fixing of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed. |
| 9 | Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed. |
| 10 | Supply and fixing modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed. |
| 11 | Supply and fix of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 12 | Supply and fix of Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings,all as specified. |
| 13 | S&F LED lamp,6500K,900lm in white colour of 12 Wattbase cap B-22 with poly carbonate difusser and aluminium heat sink ,complete all as specified & directed. |
| 14 | Supply and Fixing fan regulator, electronic step type heavy duty modular 2 module 230 volts, 120 watt complete all as specified and as directed. |
| 15 | Supply & fix LED Battens surface mounting Genral purpose in Extruded Aluninium housing with wattage of 20 watt 4 feet light fitting and removing old unserviceable fitting complete all as specified and directed. |
| 16 | S & F of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 17 | Supply and fixing in replacement call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed. |
| 18 | Supply and fixing of modular bell push one way 6 Amps 1 module complete all as specified and directed. |
| 19 | S&F of Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 8 ways, complete all as specified. |
| 20 | Supply and fix in replacement of MCB SP-06 to 32 Amp, 240 volts complete all as specified. |
| 21 | Supply and fix of MCB SPN-40-63 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 22 | Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion. |
| 23 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 2.0 core |
| 24 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and supplies as provided by manufacturer including making connection with three core 1.5sqmm flexible copper cable upto ceiling rose complete all as directed. |
| 25 | Exhaust Fan metallic body, 300mm(12\\") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including making holes in wall,plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed. |
| 26 | M&l for Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation of pole and laying of LT cable as in any type of soil and getting out complete all as specified and directed. |
| 27 | Supplying and laying of following size DWC HDPE pipe OF size 50 mm dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench,for protection of cable complete as required. |
| 28 | M&L for Returining filling in including spreading ,levelling,watering and wall ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. |
| 29 | M&L for Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engr-in Charge. |
| 30 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.0”) dia including all fitting and jointing with Inserting of cutting of suitable size from existing pipeline all as specified and directed. |
| 31 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engr-in-charge. |
| 32 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge. |
| 33 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 35 | Supply and fixing tubular steel work in vertical posts, rafters, purlins, etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 36 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engr-in-charge. |
| 37 | M & L for prepering old painted steel suraces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint match to the existing colour complete all as speciied and directed. |
| 38 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets complete. |
| 39 | S& F in position suspended anodised aluminium false celling grid system using E-gird suspended celling grid system.The size of grid shall be 605X605mm fixed inthe grid of E-grid susended celling grid system duly suspended by 6mm dai GI(upto 1200mm length) adjusting level fixed to roof slab by means of celling cleats made out of GI flat 40X3 mm size long and expantion hold fastencer 12.5mm dai 40mm long and 6mm thick calcium silicate boards of silicous and calcareous material reinforced with cellulous fibre for fixing in 600X600mm grid complete all as spcified and dircted. |
| 40 | Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M&L Vitrified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over screed bed 15 mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 41 | Ditto-,but as in skirting backing coat 10mm in CM(1:4) all as specified |
| 42 | Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed. |
| 43 | Ditto-,but as in skirting backing coat 10mm in CM(1:4) all as specified |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level including stone/tiles any type complete all as specified and directed. |
| 45 | M&L PCC type C-2 (1:3:6) size 20mm graded coarse aggregate 50mm thick as in plinth protection complete all as specified and directed. |
| 46 | Taking down chowkat or frame with shutters exc 1.5 and n.exc 4.0 sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 47 | F for factory made pressed steel frames of size 165 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming including plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) in filling of door frame complete ,all as specified and as directed. |
| 48 | S&F IInd class HW Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered article board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete ,all as specified and as directed. |
| 49 | S&F IInd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete ,all as specified and as directed. |
| 50 | S&F Steel windows with side hungshutters including projecting typehinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded |
| 51 | M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete. |
| 52 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified. |
| 53 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 54 | S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. |
| 55 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 56 | S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors . |
| 57 | S&F butt hinges 100mm, cold rolled medium weight mild steel all as specified. |
| 58 | S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified. |
| 59 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store as directed. |
| 60 | S&F steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed . |
| 61 | Supply and fixing in repair, bib tap long nose screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, screwed down suitable for 15mm bore pipe or union, complete all as specified. |
| 62 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc. |
| 63 | Dismantling water tanks (Capacity of tank exc 500 Ltr but n exc 1000 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade complete all as specified. |
| 64 | S&F 20mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified. |
| 65 | Material and labour mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 66 | M&L for Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm/450x350x7mm thick laid over 10mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by engr-in-charge. |
| 67 | M&L reinforced cement concreteb using 20mm graded stone aggregate as in slabs supported on walls, deck slabs and in shelves and the like complete all as specified and as directed |
| 68 | M&L for form work to soffits of suspended slabs such as roof slab, floor slab and similar work not exceeding 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed.. |
| 69 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 70 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 71 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets and S&F, PVC Wall lining consisting of 5mm thick wood grin printed PVC sheet as in striups and chanel inclusive of solvent cement and fixing at site on necessary pvc frame incl fillets as per specifications and drawings complete all as directed and as approved by Engr in Charge |
| 72 | Dismantling of tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises and M & L Chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, over 20mm thick screed bed in CM (1:6) set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed. |
| 73 | M&L, Cement concrete type C-1 1:3:6 using 20 mm graded crushed stone aggregate in surface channels and drains etc including necessary formwork. |
| 74 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends |
| 75 | Material & labour for one coat of cement base paint including preparation of old surface to match the shade as per colour scheme as approved by Engr-in-Charge. |
| 76 | M&L for two coat of oil bound distemper to old plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 77 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 32,410 during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender