Tender For Repair/Maintenance And Re-Upholstering / Weaving Of Certain Furniture Including Painting/Polishing Under Ge (Nb) Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance And Re-Upholstering / Weaving Of Certain Furniture Including Painting/Polishing Under Ge (Nb) Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefully old Unserviceable/Worn Out/broken components of Wooden/Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Decorative laminate sheets, Edge Banding & Finishing, Mild Steel Sections, Iron mongery fittings, Glass fixing/fittings, Builders Hardware, Tapestry Cloth, Foam, Upholstery & Diamond Button-Tufting , Plastic Cane, Cotton/Nylon Newar etc.and Wood Work made of 1st Class Hard Wood (Teak Wood), seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, applying putty, gluing, providing hinges,handles/knobs, polishing/painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings,as specified,as brief description of items and as directed by Engr-in-Charge. All furniture items shall be painted/polished only after completing all repairs and renewals work etc, preparation of steel/iron/wooden surface by removing of old paint/polish by using grinding machine, taking out dents & filling metal putty/wood filler to the uneven surfaces, after thoroughly preparation the surfaces of the furniture articles, then apply spray painting/polishing with two coat of synthetic enamel paint/ melamine polish. The furniture shall be repaired/ renewed, Painted/Polished on site at Officers Married Accommodation after completion of BR/EM Welcome Maintenance works. Work will be executed inside the Barrack Store Yard of GE(NB) Vizag and at various sites as per requirement as directed by Engr-in-Charge without fail. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture. Rate quoted is deemed to be including the same. |
| 2 | CHAIR VERANDAH (MS) : FD-19/256 |
| 3 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding, completed all specified, shown on drgs & directed by the Engr-in- Charge. |
| 4 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted MS rod from the chair carefully and S & F new MS rod, 10mm dia connecting rear legs, fixed by proper gas welding, completed all specified, shown on drgs & directed by the Engr-in- Charge. |
| 5 | M & L for repair to CHAIR VERANDAH (MS) by Painting frame of the Chair verandah with two coats of synthetic enamel paint of approved shade & quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty and one coat of primer where required, completed all specified, shown on drgs & directed by the Engr-in- Charge. |
| 6 | M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing unserviceable worn out cane from the Seat & Back of CHAIR VERANDAH (MS) carefully and S & F 2 Nos mild steel strip of 460mm long, 25mm wide and 5mm thick fixed by proper gas welding with suitable Nut/Bolts Screws as required in vertical and horizontal for support of Seat & Back respectively, then S&F new Seat & Back size 460mmx460mmx50mm made by using pressure-treated plywood 8mm and add padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape duly covered with inner linen cotton cloth and best water resistant cloth of approved color and texture of rate not less than 250 per meter. Seat & Back of Chair Verandah MS fixed by suitable machanism as per requirement with standard workmanship, completed all specified, shown on drgs & directed by the Engr-in- Charge. |
| 7 | SOFA 3 SEATER FULLY CUSHIONED OF SIZE 2030 X 940 X 970 MM : TP-ALLIED |
| 8 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (2030 X 940 X 970 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 9 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated 49 cm seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 10 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 03 Nos. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 3 Nos. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for sofa 3 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to sofa 3 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (970 mm back height and 49 cm seat height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 11 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Sofa of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for sofa 3 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to sofa 3 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 12 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-ALLIED series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 13 | SOFA 2 SEATER FULLY CUSHIONED OF SIZE 1755 X 940 X 970 MM : TP-ALLIED |
| 14 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (1755 X 940 X 970 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 15 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated 49 cm seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 16 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 02 Nos. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 2 Nos. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for sofa 2 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to sofa 2 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (970 mm back height and 49 cm seat height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 17 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Sofa of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for sofa 2 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to sofa 2 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 18 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-ALLIED series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 19 | SETTEE 4 SEATER TP-NUGIFIT OF SIZE 1800 X 600 X 650 MM |
| 20 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (1800 X 600 X 650 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 22 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 04 Nos. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 4 Nos. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 4 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 4 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (650 mm back height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 23 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Settee of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 4 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 4 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 24 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-NUGIFIT series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 25 | SETTEE 3 SEATER TP-NUGIFIT OF SIZE 1350 X 500 X 550 MM |
| 26 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (1350 X 500 X 550 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 28 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 03 Nos. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 3 Nos. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 3 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 3 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (550 mm overall height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 29 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Settee of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 3 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 3 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 30 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-NUGIFIT series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 31 | SETTEE 2 SEATER CORNER TYPE TP-NUGIFIT OF SIZE 900 X 600 X 650 MM |
| 32 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (900 X 600 X 650 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 33 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 34 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 02 Nos. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 2 Nos. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 2 seater corner type of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 2 Seater corner type completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (650 mm overall height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 35 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Settee of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 2 seater corner type of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 2 Seater corner type completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 36 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-NUGIFIT series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 37 | SETTEE 1 SEATER TP-NUGIFIT OF SIZE 600 X 450 X 500 MM |
| 38 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, kiln-dried solid hardwood members to reinforce the framework, securely fastening all joint sections with industrial-grade wood adhesive and heavy-duty, corrosion-resistant wood screws, including checking alignment, tightening, and fitting anti-skid nylon buffers to bottom legs/support stumps to maintain original outer dimensions (600 X 450 X 500 MM) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 39 | M&L for Suspension and Under-Seat Webbing System: M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile zigzag (no-sag) steel springs spaced uniformly across the seat frame, interwoven and reinforced with premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 40 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration of Base and Backrest: M&L to dismantling, taking out carefully old existing cover and worn-out foam from Base and Backrest of any description and S&F New base of high-resiliency (HR) polyurethane foam comprising of 01 No. 4 inch thick of 40 density of exact existing size, New Back of contoured polyurethane foam comprising of 1 No. 3 inch thick of 28 to 32 density of exact existing size with high-grade polyfill/recron wrap, and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 1 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 1 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure the signature panelled cushioning, lumbar support, and mandated dimensions (500 mm overall height) are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 41 | M&L for Leatherite Upholstery Replacement: M&L to dismantling, taking out carefully old existing cover from Settee of any description and S&F New premium-grade, breathable, anti-peel synthetic Leatherite cover for settee 1 seater of approved color, grain texture, and matte finish of rate not less than 250 per meter, precisely cut and tailored to eliminate sagging, duly double-stitched using high-strength nylon thread with tailored piping lines along outer edges and deep-grooved panel stitching on the backrest, covered to settee 1 Seater completely on all exposed surfaces without disturbing the existing stable parts, including sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 42 | M&L for Exposed Wood Polishing: M&L for Polishing the exposed teak wood frames, base border, and support legs with melamine polish to match the original matte/semi-gloss aesthetic of the TP-NUGIFIT series, with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 43 | GODREJ INTERIO PARTO PLUS 5-SEATER SOFA SET (COMPRISING 1 NO. 3-SEATER OF SIZE 1750 X 860 X 830 MM AND 2 NOS. 1-SEATER UNITS OF SIZE 920 X 860 X 830 MM) |
| 44 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, knot-free solid hardwood and commercial-grade plywood members to reinforce the internal structural framework, securely fastening all joint sections with high-strength synthetic resin industrial-grade wood adhesive (e.g., Fevicol SH or approved equivalent) and heavy-duty, corrosion-resistant wood screws, including alignment corrections, tightening existing frames, and repairing or replacing damaged sofa legs, glides, or base supports to re-establish a stable 125 mm leg ground clearance and perfectly preserve the original factory dimensions (1750 x 860 x 830 mm for the 3-seater and 920 x 860 x 830 mm for the 1-seaters) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 45 | M&L for Suspension and Under-Seat Webbing System: M&L for the complete retrofitting of the underlying support system by stripping, removing, and taking out old, worn-out under-seat suspension, sagged zig-zag springs, elastic webbing bands, and tension clips of any description, and supplying and fixing new heavy-duty, high-tensile zigzag (no-sag) steel springs uniformly across the seat frames of both the 3-seater and 1-seater units, interwoven and reinforced with a dense grid of premium-grade 50mm wide elasticated nylon webbing grid lines stretched tightly using mechanical tensioners and securely stapled to the main hardwood frame to eliminate sagging, distribute body weight evenly, prevent future structural deflation, and strictly maintain the mandated uniform 450 mm finished seat height under load with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 46 | M&L for Leatherite Upholstery Replacement with Cushioning Restoration: M&L for the comprehensive renewal of all cushioning and outer covers by dismantling and taking out old existing leatherette profiles and degraded, flat foam inserts from the base, backrest, and armrests of any description, and supplying and fixing new seat cushioning built up using a combination layer of high-resiliency (HR) polyurethane foam comprising a minimum 4-inch thick base layer of 40 kg/m³ density topped with a 32 kg/m³ plush comfort layer, sculpting new backrests and armrests out of 3-inch thick contoured soft foam (28–32 kg/m³) wrapped entirely in a 100–200 GSM thermal-bonded poly-fill layer, and tailoring a new premium-grade, commercial-quality, breathable, anti-peel Synthetic Leatherite cover (minimum 1.2mm thickness, ≥40,000 Martindale rubs, material rate not less than ₹450 per meter) executed with double-lock topstitching (5 to 6 stitches per inch) and deep-grooved lumbar panel stitching on the backrest, including dust-sealing the undercarriage with a fresh 100 GSM non-woven black polypropylene fabric backing to ensure the plush ergonomic form factor and overall outer dimensions are fully restored with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 47 | M&L for Leatherite Upholstery Replacement (Alternative Item): M&L for the alternative surface-only renovation by dismantling, taking out, and removing old existing covers from the 5-seater sofa set of any description, and supplying and fixing a new premium-grade, commercial-quality, breathable, anti-peel Synthetic Leatherite cover (minimum 1.2mm thickness, ≥40,000 Martindale rubs, material rate not less than ₹450 per meter) precisely cut and tailored to eliminate sagging directly over the existing stable, certified cushioning core, executing precise double-lock topstitching along all structural edges, tailored outer border pipings, and deep-grooved panel lines on the backrests, completed without disturbing the stable internal parts and including sealing the bottom base with a fresh 100 GSM non-woven black fabric backing to match the original factory aesthetic, 450 mm seat height profile, and overall outer dimensions of the Parto Plus series with standard workmanship complete all as specified and as directed by Engr-in-Charge. |
| 48 | GODREJ 2109IT 5-SEATER LEATHERITE SOFA SET |
| 49 | M&L for Structural Framework and Base Support Restoration: M&L to thoroughly inspecting, dismantling, taking out carefully broken or sagged internal framework members of any description and S&F New seasoned, knot-free solid hardwood and commercial-grade plywood members to reinforce the internal structural framework, securely fastening all joint sections with high-strength synthetic resin industrial-grade wood adhesive (e.g., Fevicol SH or approved equivalent) and heavy-duty, corrosion-resistant wood screws, including alignment corrections, tightening existing frames, and repairing or replacing damaged sofa legs, glides, or base supports to re-establish a stable 125 mm leg ground clearance and perfectly preserve the original factory dimensions (1720 x 810 x 860 mm for the 3-seater and 780 x 810 x 860 mm for the 1-seaters) with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 50 | M&L for Webbing, Suspension System, and Inner Core Cushioning Overhaul: M&L to carefully stripping away worn-out cushioning layers, removing broken zig-zag tension springs or torn interwoven elastic webbing belts, and S&F high-tensile 50 mm wide woven elastic webbing straps closely interlaced across the base and back frames using heavy-duty industrial staples, including providing a high-density, anti-sagging inner core cushioning arrangement by S&F premium-grade 40 Density (40 kg/m³) High Resilience (HR) flexible polyurethane foam for the primary seat cushions and 32 Density (32 kg/m³) soft foam for the tufted backrest and contoured armrests, wrapped entirely in a protective layer of 150 GSM thermally bonded polyester wadding layer to ensure plushness, structural rebound capability, and to eliminate hollow cavities or sagging, perfectly matching the restored profiles of the 1720 x 810 x 860 mm 3-seater and 780 x 810 x 860 mm 1-seater structures, completed all as specified and directed by Engr-in-Charge. |
| 51 | M&L for Premium Synthetic Leather Upholstery Replacement and Stitching: M&L to removing all old, cracked, or peeled burgundy leatherette fabric covers and S&F premium automotive-grade, abrasion-resistant, spill-proof synthetic leather (Polyurethane/PVC blend fabric of approved shade and color matching the original Tycoon aesthetic) with a minimum thickness of 1.2 mm, including pattern layout cutting, precision machine stitching using high-tensile, twin-needle heavy nylon threads to replicate the factory-original contrast stitching profile, executing intricate deep-button tufting on the backrest panels, and meticulously tailoring around the curved armrest contours to ensure a snug, wrinkle-free fit over the entire 5-seater surface area (1720 mm width for the 3-seater and 780 mm width for each 1-seater with a uniform depth of 810 mm and height of 860 mm), completed all as specified and directed by Engr-in-Charge. |
| 52 | M&L for Base Cambric Dust Cover Installation and Final Finishing: M&L to turning over the stabilized sofa units and S&F a fresh, breathable, non-woven black polypropylene cambric dust cover fabric across the entire bottom base of the three-seater (measuring 1720 x 810 mm) and two single-seater frames (each measuring 780 x 810 mm) using corrosion-resistant industrial pneumatic staples to seal off internal framework components, including applying high-grade leather conditioner and anti-static protectant spray to the newly installed synthetic leather surfaces, cleaning all exposed joint areas, removing stray threads or adhesive residues, and performing load-bearing stability tests to certify readiness for institutional lounge deployment, completed all as specified and directed by Engr-in-Charge. |
| 53 | GODREJ INTERIO MIDAS LOUNGE / D-ALPINE 5-SEATER SOFA SET (COMPRISING 1 NO. 3-SEATER OF SIZE 1790 x 835 x 830 MM AND 2 NOS. 1-SEATER UNITS OF SIZE 860 x 835 x 830 MM) |
| 54 | M&L for Structural Framework and Base Support Restoration (SOFA 3 SEATER OF SIZE 1790 X 835 X 830 MM): Dismantling and replacing broken or sagging internal frame pieces with new seasoned, kiln-dried solid hardwood. Sharp corners must be wrapped in a 2mm thick cotton webbing shield to stop fabric friction. Joints must be secured with industrial wood glue and heavy-duty wood screws. Base legs must be fitted with anti-skid, non-marking nylon shoes while strictly maintaining the outer dimensions of 1790 x 835 x 830 mm with standard workmanship completed all as specified and directed by Engr-in-Charge. |
| 55 | M&L for Suspension and Under-Seat Webbing System (SOFA 3 SEATER OF SIZE 1790 X 835 X 830 MM): M&L to dismantling, removing and taking out carefully old worn-out under-seat suspension/webbing of any description and S&F New heavy-duty, high-tensile interwoven 70mm and 50mm industrial-grade rubber tension webbings stretched tightly using mechanical tensioners, overlaid and reinforced with a premium heavy-duty load-distribution PF sheet to block foam migration and securely stapled to the main hardwood frame to distribute body weight evenly and prevent future structural deflation to maintain the mandated seat height under load (floor-to-seat height 450 MM) with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 56 | Fabric Upholstery & Cushioning Restoration (SOFA 3 SEATER OF SIZE 1790 X 835 X 830 MM): Removing old covers and foam to install a new High-Resiliency (HR) 32-density polyurethane foam base core (1470 mm inner width) paired with layered 28-to-23 density contoured back/lumbar foam wrapped in premium polyfill/recron. The exterior must be upholstered in premium stain-and-abrasion resistant soft velvet fabric (minimum material cost ₹950/meter) with double-needle nylon lock-stitching (Tkt 40/60 thread), custom edge piping, deep-grooved backrest paneling, a dust-proof non-woven black fabric bottom backing, and commercial zippers for a modular, changeable cover system with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 57 | Structural Framework and Base Support Restoration (SOFA 1 SEATER OF SIZE 860 X 835 X 830 MM): Replicating the full frame repair protocol on both individual single chairs. Includes replacing broken parts with seasoned kiln-dried hardwood, applying the 2mm anti-fray cotton webbing corner wraps, bonding joints with industrial adhesive/screws, and updating cylindrical leg shoes to lock in the 860 x 835 x 830 mm specifications with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 58 | Suspension and Under-Seat Webbing System (SOFA 1 SEATER OF SIZE 860 X 835 X 830 MM): Overhauling the foundation of both single chairs using mechanical tensioners to interweave 70mm and 50mm premium elasticated rubber straps across the base frame, anchoring them with heavy staples, and capping the structure with a protective PF sheet to maintain a 450 mm floor-to-seat clearance with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 59 | Fabric Upholstery & Cushioning Restoration (SOFA 1 SEATER OF SIZE 860 X 835 X 830 MM): Upgrading the core of both chairs with a 32-density HR polyurethane foam base block (530 mm inner clear width) and layered 28-to-23 density contoured lumbar cushions wrapped in high-grade polyfill/recron. The final finish utilizes premium stain-resistant velvet fabric (minimum cost ₹950/meter) complete with twin-needle nylon stitching, overcast margins, structural piping, modular zipper paths, and a non-woven black dust backing with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 60 | GODREJ VIDA 4 SEATER SOFA SET (COMPRISING 2 NOS. 2-SEATER UNITS OF SIZE 1410 MM WIDTH X 915 MM DEPTH X 830 MM HEIGHT) |
| 61 | M & L for structural framework and understructure restoration: M & L for repair to sofa by taking down, inspecting, dismantling, and removing the existing broken, cracked, or unserviceable internal framework members of any description carefully without disturbing the adjoining stable parts, and Supplying and Fixing new seasoned, kiln-dried solid hardwood and pinewood framing blocks to reinforce the underlying chassis, securely fastening all joint sections with high-grade wood adhesive and heavy-duty countersunk wood screws, including wrapping a minimum 2mm thick soft cotton webbing edge shield over sharp corners to prevent interior mechanical friction, verifying geometric alignment, tightening fasteners, and fitting anti-skid, non-marking polymer floor-protection shoes to support feet to permanently maintain the original outer unit dimensions of 1410 mm Width × 915 mm Depth × 830 mm Height, completed all as specified and directed by Engr-in-Charge. |
| 62 | M & L for suspension and under-seat pocket spring foundation: M & L for repair to sofa by dismantling and removing the existing worn-out, sagged, or unserviceable under-seat webbings and old tension grids carefully without disturbing the adjoining parts, and Supplying and Fixing a new premium pocket-spring foundation matrix comprised of high-tensile steel wire coils encapsulated in independent fabric pockets to re-establish reactive bounce, interwoven and reinforced across the base framework using heavy-duty 70mm and 50mm wide industrial-grade elasticated rubber tension webbings pulled tightly with mechanical stretchers, including overlaying the complete layout with a thick, high-durability load-distribution PF sheet to block foam migration and guarantee the mandated floor-to-seat landing platform height of 450 mm is uniformly maintained across the 1090 mm clear inner seating width, completed all as specified and directed by Engr-in-Charge. |
| 63 | M & L for cushioning core and ergonomic foam reconstruction of base and backrest: M & L for repair to sofa by stripping and removing the existing compressed, degraded, or unserviceable foam layers and flattened fiber batts from the seat platforms, armrests, and backrests carefully without disturbing the adjoining framing parts, and completely reconstructing the cushion layout by Supplying and Fixing a new high-resiliency (HR) polyurethane foam slab stock matrix of minimum 32D density to establish a durable seat surface matching the 1090 mm inner layout, rebuilding the high backrests, neck zones, and deep-angled arm borders using a contoured, layered combination of 28D and 23D density polyurethane foam profiles, and fully enveloping the core assembly in high-purity Recron® conjugated hollow microfibre wadding to replicate a deep \\"sink-in\\" relaxation feel and restore plush cushion volume, completed all as specified and directed by Engr-in-Charge. |
| 64 | M & L for premium fabric upholstery replacement with cushioning restoration: M & L for repair to sofa by stripping and removing the existing torn, stained, or unserviceable synthetic leatherette cover and degraded cushioning layers carefully, and completely refurbishing the entire unit profile by Supplying and Fixing a new premium-grade, stain-resistant, anti-fray soft velvet fabric cover of approved color, grain texture, and matte finish of rate not less than Rs. 950 per mtr, precisely cut against factory templates to eliminate fabric sagging across the 160 mm wide armrests, duly joining all structural seams via industrial twin-needle safety lock-stitching utilizing high-tensile bonded nylon thread (Tkt 40/60 match) with overcast internal margins, including custom edge piping lines, deep-grooved symmetrical backrest panel stitching, commercial zipper tracks for a modular changeable system, and sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure delivery to factory-new standards, completed all as specified and directed by Engr-in-Charge. |
| 65 | M & L for premium fabric upholstery replacement: M & L for repair to sofa by stripping and removing the existing torn, stained, or unserviceable synthetic leatherette cover from all exposed elements carefully without disturbing or replacing the underlying serviceable cushioning material, and completely refurbishing the external finish by Supplying and Fixing a new premium-grade, stain-resistant, anti-fray soft velvet fabric cover of approved color, grain texture, and matte finish of rate not less than Rs. 950 per mtr, precisely cut against factory templates to eliminate fabric sagging or wrinkling across the 160 mm wide armrests and back contours, joining all structural seams via industrial twin-needle safety lock-stitching using high-tensile bonded nylon thread (Tkt 40/60 match) with internal margins overcast, including custom edge piping lines, deep-grooved symmetrical panel stitching on the backrest, heavy-duty commercial zipper tracks to provide a modular changeable cover system, and sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure a factory-new delivery standard, completed all as specified and directed by Engr-in-Charge |
| 66 | GODREJ DENIM 3 SEATER SOFA OF SIZE 1350 X 600 X 650 MM |
| 67 | Structural Framework and Understructure Restoration Component: Material and Labor (M&L) for the complete structural overhaul of the sofa chassis by executing an initial diagnostic inspection and systematically stripping the core to take down all unserviceable, broken, cracked, or sagging internal framing members of any description without disturbing the stable adjoining components, followed by Supplying and Fixing (S&F) new seasoned, kiln-dried solid hardwood and premium multi-layered ply-blocks to reinforce the inner frame skeleton, anchoring all load-bearing corner joints with high-grade industrial wood adhesive and heavy-duty countersunk wood screws to eliminate mechanical squeaking, wrapping a minimum 2mm thick soft cotton webbing edge shield over sharp corners to prevent interior mechanical friction, verifying geometric alignment, tightening base fasteners, and fitting anti-skid, non-marking polymer floor-protection shoes to support feet to permanently maintain the original outer unit dimensions of 1350 mm Width × 600 mm Depth × 650 mm Height, completed all as specified and directed by Engr-in-Charge. |
| 68 | Suspension and Under-Seat Foundation Component: Material and Labor (M&L) for overhauling the foundational suspension system by dismantling and carefully removing old worn-out under-seat webbings, degraded mesh grids, or sagging suspension layers of any description without disturbing the adjoining framing components, followed by S&F a new heavy-duty, high-tensile mesh grid foundation composed of interwoven 70mm and 50mm wide industrial-grade elasticated rubber tension webbings pulled tightly to optimum engineering parameters using mechanical stretchers and securely anchored via heavy-gauge pneumatically driven staples, including overlaying the complete tensioned layout with a thick, high-durability load-distribution PF sheet to block foam migration, distribute multi-person body weight evenly, prevent down-warping under load, and guarantee that the mandated floor-to-seat landing platform height of 430 mm is uniformly maintained across the entire custom seating width, completed all as specified and directed by Engr-in-Charge. |
| 69 | Cushioning Core and Ergonomic Foam Reconstruction of Base and Backrest Component: Material and Labor (M&L) for reconstructing the inner cushioning layers by stripping, removing, and pulling out old compressed, degraded, or unserviceable foam layers and flattened fiber batts from the seat platforms, track armrests, and backrests carefully without disturbing the underlying framework parts, followed by completely reconstructing the cushion layout by S&F a new high-resiliency (HR) polyurethane foam slab stock matrix with a minimum density of 32D to establish a durable, non-collapsing seating surface matching the internal dimensional layout, rebuilding the mid-height backrests, lumbar support zones, and distinct blocky arm borders using a contoured, layered combination of 28D and 23D density polyurethane foam profiles to perfectly map original boxy ergonomics, and fully enveloping the entire foam core assembly across the 3-seater couch in high-purity Recron® conjugated hollow microfibre wadding to protect inner foam from air exposure, prevent premature softening, and fully restore plush cushion volume, completed all as specified and directed by Engr-in-Charge. |
| 70 | Premium Fabric Upholstery Replacement with Cushioning Restoration Component: Material and Labor (M&L) for the comprehensive refurbishment of the complete sofa envelope by stripping away the existing torn, stained, faded, or unserviceable fabric cover and degraded cushioning layers carefully, and completely refurbishing the entire unit profile by S&F a new premium-grade, stain-resistant, anti-fray woven upholstery fabric cover of approved color, grain texture, and matte finish of rate not less than Rs. 750 per mtr, precisely cut against strict factory pattern templates to eliminate fabric sagging, puckering, or wrinkling across track armrests and back contours, duly joining all structural seams via industrial twin-needle safety lock-stitching utilizing high-tensile bonded nylon thread (Tkt 40/60 match) with overcast internal seam margins, including incorporating clean straight accent lines, custom edge piping lines to define the boxy profile, heavy-duty commercial zipper tracks to provide a modular field-changeable system, and neatly sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure delivery to factory-new standards, completed all as specified and directed by Engr-in-Charge. |
| 71 | Premium Fabric Upholstery Replacement (Fabric Only Variant) Component: Material and Labor (M&L) for a streamlined upholstery refresh of the sofa shell by stripping away the existing torn, stained, faded, or unserviceable fabric cover from all exposed elements carefully without disturbing or replacing the underlying serviceable cushioning material, and completely refurbishing the external finish by S&F a new premium-grade, stain-resistant, anti-fray woven upholstery fabric cover of approved color, grain texture, and matte finish of rate not less than Rs. 750 per mtr, precisely cut against factory templates to eliminate fabric sagging or wrinkling across the track armrests and back contours, joining all structural seams via industrial twin-needle safety lock-stitching using high-tensile bonded nylon thread (Tkt 40/60 match) with internal margins overcast, including custom edge piping lines to retain the sharp, boxy design profile, heavy-duty commercial zipper tracks for a modular changeable cover system, and sealing the bottom base of the unit with a heavy-duty, dust-proof, non-woven black fabric backing to ensure a factory-new delivery standard, completed all as specified and directed by Engr-in-Charge. |
| 72 | GODREJ-3644 2 SEATER SOFA (CORNER TYPE) OF SIZE 1430 X 790 X 860 MM |
| 73 | Structural Framework and Understructure Restoration Component: Material and Labor (M&L) for the complete structural overhaul of the sofa chassis by executing an initial diagnostic inspection and systematically stripping the core to take down all unserviceable, broken, cracked, or sagging internal framing members of any description without disturbing the stable adjoining components, followed by Supplying and Fixing (S&F) new seasoned, knot-free, termite-proof treated solid New Zealand pinewood framing members and horizontal metal stiffeners to reinforce the inner frame skeleton, anchoring all load-bearing corner joints with high-grade industrial wood adhesive and heavy-duty countersunk wood screws to eliminate mechanical squeaking, wrapping a minimum 2mm thick soft cotton webbing edge shield over sharp corners to prevent interior mechanical friction, verifying geometric alignment, tightening base fasteners, and fitting anti-skid, non-marking polymer floor-protection shoes to the solid wood support legs to permanently maintain the original outer unit dimensions of 1430 mm Width × 790 mm Depth × 860 mm Height, completed all as specified and directed by Engr-in-Charge. |
| 74 | Suspension and Under-Seat Foundation Component: Material and Labor (M&L) for overhauling the foundational suspension system by dismantling and carefully removing old worn-out under-seat webbings, degraded mesh grids, or sagging suspension layers of any description without disturbing the adjoining framing components, followed by S&F a new heavy-duty, high-tensile mesh grid foundation composed of interwoven 70mm and 50mm wide industrial-grade elasticated rubber tension webbings pulled tightly to optimum engineering parameters using mechanical stretchers and securely anchored via heavy-gauge pneumatically driven staples, including overlaying the complete tensioned layout with a thick, high-durability load-distribution PF sheet to block foam migration, distribute multi-person body weight evenly, prevent down-warping under load, and guarantee that the mandated floor-to-seat landing platform height of 430 mm is uniformly maintained across the entire custom seating width, completed all as specified and directed by Engr-in-Charge. |
| 75 | Cushioning Core and Ergonomic Foam Reconstruction of Base and Backrest Component: Material and Labor (M&L) for reconstructing the inner cushioning layers by stripping, removing, and pulling out old compressed, degraded, or unserviceable foam layers and flattened fiber batts from the seat platforms, soft padded edges, and backrests carefully without disturbing the underlying framework parts, followed by completely reconstructing the cushion layout by S&F a new high-resiliency (HR) polyurethane foam slab stock matrix with a minimum density of 32D to establish a durable, non-collapsing seating surface matching the internal dimensional layout, rebuilding the generous backrests, lumbar support zones, and distinct soft arm borders using a contoured, layered combination of 28D and 23D density polyurethane foam profiles to perfectly map original wedge-shaped mid-century modern ergonomics, and fully enveloping the entire foam core assembly across the 2-seater sofa in high-purity Recron® conjugated hollow microfibre wadding to protect inner foam from air exposure, prevent premature softening, deliver a signature comfortable sinking feeling with floating effect, and fully restore plush cushion volume, completed all as specified and directed by Engr-in-Charge. |
| 76 | Premium Fabric Upholstery Replacement with Cushioning Restoration Component: Material and Labor (M&L) for the comprehensive refurbishment of the complete sofa envelope by stripping away the existing torn, stained, faded, or unserviceable fabric cover and degraded cushioning layers carefully, and completely refurbishing the entire unit profile by S&F a new premium-grade, stain-resistant, anti-fray woven upholstery fabric cover of approved color (Taupe/Green), grain texture, and matte finish of rate not less than Rs. 750 per mtr, precisely cut against strict factory pattern templates to eliminate fabric sagging, puckering, or wrinkling across track armrests and back contours, duly joining all structural seams via industrial twin-needle safety lock-stitching utilizing high-tensile bonded nylon thread (Tkt 40/60 match) with overcast internal seam margins, including incorporating clean straight accent lines, custom edge piping lines to define the sleek profile, heavy-duty commercial zipper tracks to provide a modular field-changeable system, and neatly sealing the bottom base with a heavy-duty, dust-proof, non-woven black fabric backing to ensure delivery to factory-new standards, completed all as specified and directed by Engr-in-Charge. |
| 77 | Premium Fabric Upholstery Replacement (Fabric Only Variant) Component: Material and Labor (M&L) for a streamlined upholstery refresh of the sofa shell by stripping away the existing torn, stained, faded, or unserviceable fabric cover from all exposed elements carefully without disturbing or replacing the underlying serviceable cushioning material, and completely refurbishing the external finish by S&F a new premium-grade, stain-resistant, anti-fray woven upholstery fabric cover of approved color (Taupe/Green), grain texture, and matte finish of rate not less than Rs. 750 per mtr, precisely cut against factory templates to eliminate fabric sagging or wrinkling across the track armrests and back contours, joining all structural seams via industrial twin-needle safety lock-stitching using high-tensile bonded nylon thread (Tkt 40/60 match) with internal margins overcast, including custom edge piping lines to retain the sharp design profile, heavy-duty commercial zipper tracks for a modular changeable cover system, and sealing the bottom base of the unit with a heavy-duty, dust-proof, non-woven black fabric backing to ensure a factory-new delivery standard, completed all as specified and directed by Engr-in-Charge. |
| 78 | CHAIR COMPUTER LOW OR HIGH BACK TP |
| 79 | Taking out U/S base and S&F new Stainless Steel 5 star base fitted with twin wheel castors 50-60mm dia with standard workmanship completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 80 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric or leatherier cover for seat or back of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 81 | S & F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old U/S one for Chair Computer High or Low of different Make and Model with proper tilt adjustment key complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 82 | Taking out U/S hand rest pair and S&F new hand rest pair of black integral skin polyurethane reinforced with MS insert with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 83 | M & L for removing worn out u/s foam from the Chair and S&F Polyurethane foam 50 mm thick 40 density for seat/back with PVC lipping with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 84 | M&L for painting to MS/CRCA frame of the chair by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the MS/CRCA frame, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge |
| 85 | CHAIR VISITORS OR NON REVOLVING TP |
| 86 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric or leatherier cover for seat or back of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 87 | M & L for removing worn out u/s foam from the Chair and S&F Polyurethane foam 50 mm thick 40 density for seat/back with PVC lipping with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 88 | Taking out U/S hand rest pair and S&F new hand rest pair of black integral skin polyurethane reinforced with MS insert with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 89 | PVC hard cap in lieu of worn out one with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 90 | M&L for painting to MS/CRCA frame of the chair by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the MS/CRCA frame, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge |
| 91 | CHAIR HALO VHB / VB PCH 9200 / 9201R & HALO MB PCH 9202R OR HALO VISITOR PCH 9202R OF GODREJ |
| 92 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 530 x 954 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Halo 9200 / 9201 R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 93 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR foam moulded size 546 x 490 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for 9200 / 9201 R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 94 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 530 x 700 mm of 50mm thick 40 density with 12 mm hot pressed ply wood and cover made of soft leather duly stiched and fixed over for MB PCH 9202R or Visitor PCH 92121V with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 95 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR foam moulded size 546 x 490 mm of 50mm with 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for MB PCH 9202 R or visitor PCH 92121V with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 96 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric or leatherier cover for seat or back of Halo HB / MB / Visitor Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 97 | Removed existing U/S cover of Arm rest and S&F PU foam 50 mm with Soft leather cover for arm rest of PCH 9200 /9201 / 9202R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 98 | Taking out U/S base and S&F new Stainless Steel 5 star base fitted with twin wheel castors 50-60mm dia for PCH 9200 / 9201 / 9202R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 99 | Taking out U/S KTS mechanism and S&F new KTS mechanism for 5 position locking lever for PCH 9200 / 9201 / 9202R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 100 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for PCH 9200 / 9201 / 9202R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 101 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for PCH 9200 / 9201 / 9202 R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 102 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 103 | M&L for painting to understructure of Halo visitor PCH 9202 R by two coats of Silver metallic grey over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the understructure to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 104 | CHAIR HB MONARCH PCH 9N01 A / SUPREME HB OR CHAIR MB MONARCH PCH 9N02 A / SUPREME OR CHAIR VISITOR MONARCH PCH 9N12 R / SUPREME OF GODREJ |
| 105 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 530 x 960 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for HB PCH 9N01A/Supreme with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 106 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR PU foam moulded size 530 x 490 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for HB PCH 9N01A/Supreme with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 107 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 530 x 675 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for MB PCH 9N12 R / Supreme with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 108 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 530 x 490 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for MB PCH 9N12 R / Supreme with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 109 | Leather cover duly stiched and fixed to existing of Monarch / Supreme HB / MB / Visitor seat or back base without distrubing the existing servicable HR PU foam chairs with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 110 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Monarch model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 111 | M & L for removing U/S Spring button/ cap from the Arm rest and S&F new Spring button/ cap for Arm rest movement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 112 | M & L to Buffing the existing Arm rest Die-cast SS chrome handles for Supreme model with machine to clean dirt marks and tighten the loosen handles with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 113 | Taking out U/S base and S&F new Stainless Steel 5 star base fitted with twin wheel castors 50-60mm dia for PCH 9N01A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 114 | Taking out U/S KTS mechanism and S&F new KTS mechanism for 5 position locking lever for PCH 9N01A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 115 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for PCH 9N01A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 116 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for PCH 9N01A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 117 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 118 | M&L for painting to understructure of Moarch / Supreme visitor chair by two coats of Silver metallic grey over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the understructure to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 119 | CHAIR KAREENA HB PCH 9P01A / MB PCH 9P02 A / CONFERENCE PCH 9P02-T / VISITOR PCH 9P12-T OF GODREJ |
| 120 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 480 x 760 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Kareena HB PCH 9P01A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 121 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR PU foam moulded size 510 x 480 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Kareena HB PCH 9P01 A or MB PCH 9P02A with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 122 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 480 x 645 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for MB PCH 9202R or Visitor PCH 9P12-T or conference PCH 9P02-T with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 123 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR PU foam moulded size 510 x 480 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for MB PCH 9202R or Visitor PCH 9P02-T or conference PCH 9P02-T with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 124 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric or leatherier cover for seat or back of Kareena HB / MB / Conference / Visitor Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 125 | M & L for removing u/s Adjustable PU arm of Armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Kareena model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 126 | M & L for removing U/S Spring button/ cap from the Arm rest and S&F new Spring button/ cap for Arm rest movement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 127 | Taking out U/S base and S&F new Stainless Steel 5 star base fitted with twin wheel castors 50-60mm dia for Kareena model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 128 | Taking out U/S KTS mechanism and S&F new KTS mechanism for 4 position locking lever for Kareena model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 129 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for Kareena model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 130 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Kareena model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 131 | M & L to Buffing the existing understructure of Kareena model visitor chair with machine to clean dirt marks and tighten the loosen handles with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 132 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 133 | CHAIR BRAVO HB PCH 9U01R / MB PCH 9U02 R / VISITOR PCH 9U12 R OF GODREJ |
| 134 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 695 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Bravo HB PCH 9U01R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 135 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 580 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Bravo MB 9U02 R / Visitor PCH 9U12 R with standard workmanship complete all as specified, |
| 136 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 470 x 480 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Bravo HB PCH 9U01R / MB PCH 9U02 R / Visitor PCH PU12 R with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 137 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric or leatherier cover for seat or back of Bravo HB / MB / Visitor Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 138 | M & L for removing u/s Adjustable PU arm of Armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 139 | M & L to remove unserviceable pedestal assembly (5 star base), S&F new Stainless Steel pedestal assembly fitted with twin wheel castors 50-60mm dia with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 140 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair Bravo model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 141 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for for Bravo model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 142 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Bravo model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 143 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 144 | M&L for painting to understructure of Chairs Bravo Model by two coats of black synthetic enamel paint over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 145 | CHAIR MB MODEL MOTION OF GODREJ (FOR WORKSTATION) |
| 146 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 695 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of Polyster mesh fabric net uphostery duly stiched and fixed over for Chair MB Model Motion with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 147 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 580 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of Polyster mesh fabric net uphostery duly stiched and fixed over for Chair MB Model Motion with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 148 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR PU foam moulded size 475 x 480 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of Polyster mesh fabric net uphostery duly stiched and fixed over for Chair MB Model Motion with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 149 | M & L for removing worn out u/s Polyster mesh fabric net uphostery cover from the Chair and S&F New Polyster mesh fabric net uphostery cover for seat or back of Chair MB Model Motion of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing parts etc with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 150 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Monarch model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 151 | M & L to remove unserviceable pedestal assembly (5 star base), S&F new Stainless Steel pedestal assembly fitted with twin wheel castors 50-60mm dia with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 152 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair MB Model Motion with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 153 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for for Chair MB Model Motion with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 154 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Bravo model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 155 | M&L for painting to understructure of Chair MB Model Motion by two coats of Silver metallic grey over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 156 | CHAIR MESH FABRIC MODEL ACE OR LEOMA HB / MB OR VISITOR OF GODREJ |
| 157 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 465 x 600 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of Polyster mesh fabric net uphostery duly stiched and fixed over for Chair Mesh fabric Model ACE or Leoma HB/MB or VIsitor with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 158 | Dismantling, taking out carefully old existing seat rest of any description & replacement of the same with S&F new seat rest HR PU foam moulded size 510 x 490 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of Polyster mesh fabric net uphostery duly stiched and fixed over for Chair Mesh fabric Model ACE or Leoma HB/MB or VIsitor with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 159 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Polyester acrylic fabric cover for seat or back of ACE / Leoma Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing serviceable HR PU foam & parts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 160 | Taking out U/S Taking out U/S Neck rest and S&F new Neck rest PU foam 40 density covered with Polyster fabric(black colour) rate not less than 250 per meter for ACE /Leoma Full back chair with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 161 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for ACE /Leoma model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 162 | M & L for removing U/S Spring button/ cap from the Arm rest and S&F new Spring button/ cap for Arm rest movement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 163 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair ACE /Leoma model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 164 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for Chair ACE /Leoma model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 165 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Chair ACE /Leoma model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 166 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 167 | M&L for painting to understructure of Chair ACE /Leoma model by two coats of Silver metallic grey over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 168 | CHAIR REV MODEL TYCOON HF-366-1 MB OF MAKE FEATHERLITE |
| 169 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 690 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Tycoon HF 366-1 MB with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 170 | Dismantling, taking out carefully old existing Seat rest of any description & replacement of the same with S&F new Seat rest HR PU foam moulded size 475 x 480 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Chair MB Tycoon HF-366 with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 171 | M & L for removing worn out u/s Soft leatherier cover from the Chair and S&F New Soft leatherier cover for seat or back of Chair MB Tycoon HF-366 of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing serviceable HR PU foam & parts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 172 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for ACE /Leoma model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 173 | M & L to remove unserviceable pedestal assembly (5 star base), S&F new Stainless Steel pedestal assembly fitted with twin wheel castors 50-60mm dia with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 174 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair MB Tycoon HF-366 model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 175 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for Chair MB Tycoon HF-366 model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 176 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 177 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Chair MB Tycoon HF-366 model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 178 | M&L for painting to understructure of Chair MB Tycoon model by two coats of Silver metallic grey over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 179 | CHAIR MARVEL PCH FU 3301 / 3302 HB / MB / VISITORS OF GODREJ |
| 180 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 475 x 764 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Chair Marvel HB with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 181 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 477 x 601 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Chair Marvel MB / Visitor type with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 182 | Dismantling, taking out carefully old existing seat rest of any description & replacement of the same with S&F new seat rest HR PU foam moulded size 470 x 480mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of soft leather duly stiched and fixed over for Chair Marvel MB / HB Visitor type with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 183 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New leatherier cover for seat or back of Marvel HB / MB / Visitor Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing serviceable HR PU foam & parts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 184 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Marvel model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 185 | M & L for removing U/S Spring button/ cap from the Arm rest and S&F new Spring button/ cap for Arm rest movement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 186 | M & L to remove unserviceable pedestal assembly (5 star base), S&F new Stainless Steel pedestal assembly fitted with twin wheel castors 50-60mm dia with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 187 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair Marvel model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 188 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for Chair Marvel model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 189 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 190 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Chair Marvel model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 191 | M & L to Buffing the existing understructure of Marvel model visitor chair with machine to clean dirt marks and tighten the loosen handles with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 192 | CHAIR FABRIC REGENCY HB / MB / VISITOR WITH OR WITH OUT ARMS PCH 9001 D / PCH 9002 D / PCH 9003 D / PCH 9004 D OF GODREJ |
| 193 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 500 x 720 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of fabric uphostery (blue shade) duly stiched and fixed over for Chair Regency HB with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 194 | Dismantling, taking out carefully old existing Back rest of any description & replacement of the same with S&F new Back rest HR PU foam moulded size 500 x 490 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of fabric uphostery (blue shade) duly stiched and fixed over for Chair Regency MB PCH 7002 D / Visitor PCH 7003 D / PCH 7004D with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 195 | Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seat rest HR PU foam moulded size 500 X 465 mm of 50mm thick 40 density with 12 mm hot pressed plywood and cover made of fabric uphostery (blue shade) duly stiched and fixed over for Chair Regency HB / MB / Visitor with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 196 | M & L for removing worn out u/s Acrylic fabric or leatherier cover from the Chair and S&F New Acrylic fabric uphostery cover for seat or back of Regency HB / MB / Visitor Chair of approved color and texture of rate not less than 250 per meter duly stitched and covered to Chair completely all exposed surfaces without disturbing the existing serviceable HR PU foam & parts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 197 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Chair fabric Regency model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 198 | M & L to remove unserviceable pedestal assembly (5 star base), S&F new Stainless Steel pedestal assembly fitted with twin wheel castors 50-60mm dia with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 199 | Taking out U/S Center synchro tilt mechanism locking lever (KTS mechanism) and S&F new Center synchro tilt mechanism for 5 position locking lever for Chair fabric Regency model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 200 | Taking out U/S Hydraulic rod heavy duty and S&F new Hydraulic rod heavy duty for height adjustment for Chair fabric Regency model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 201 | Taking out U/S Twin wheel castor and S&F new Twin wheel castor 50 - 60 dia heavy duty for Chair fabric Regency model with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 202 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 203 | M&L for painting to MS ERW tube (understructure) of the chair fabric Regency model by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 204 | CHAIR STEEL WITH / WITHOUT ARMS CUSHIONED (MODEL CHR 8 / CHR 73 MAKE GODREJ) |
| 205 | Jointing of worn out MS Square pipe 20 mm size of leg or frame by Gas welding and applying red oxide primer at jointed area with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 206 | Replacement of Arms rest with S&F new Arms rest size 50x20x255 made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 207 | M & L for repair to Chair Godrej model CHR 8 / CHR 73 by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth, pressed foam cushion, elastic webbing tape, PVC lipping from each seat and back carefully without disturbing the adjoining parts and fully upholstered by using new 50mm thick 40 density foam sheets and new webbing tape, PVC lipping and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 250 per mtr fixed by using heavy duty gun tacker including covering the seat and back with plastic transparent flim, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 208 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws for bottom of MS Pipe frame and Plastic End Cap suitable for top of MS Pipe frame with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 209 | M&L for two coats of TA/Graphite Gray synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of all Steel frames of Chair CHR8/CHR73, then paint (Make of Paint: Asian/Berger/Nerolac) through a spray machine to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 210 | CHAIR VISITOR / WRITING MODEL MELUHA MAKE METHODEX |
| 211 | Remove u/s worn out faded foam & mesh fabric from seat and S&F new seat Size 460 w x 460 H mm +/- 5% variance of Chair Visitor/Writing Methodex made out by using Breathable foam of 50mm thick 40 density including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new mesh febric of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 212 | Remove u/s worn out faded foam & mesh febric from back and S&F new Back Size 460 w x 560 H mm +/- 5% variance of Chair Visitor/Writing Methodex made out by using Breathable foam mesh of 50mm thick 40 density including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new mesh febric of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 213 | Taking out U/S adjustable PU arm of armrest and S&F new Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Chair Visitor/Writing Methodex with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 214 | M & L for removing U/S Spring button/ cap from the Arm rest and S&F new Spring button/ cap for Arm rest movement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 215 | M&L for painting to understructure of the Chair Visitor/Writing Methodex by two coats of synthetic enamel paint of approved shade and quality over a coat of red oxide by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 216 | M & L to refix the worn out chrome Slege base with new nickel Bolts with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 217 | Replacement of Nylon bushed where required with S&F new Nylon bushed to the under structure U shape legs of superior quality with suitable Steel Screws with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 218 | CHAIR REVOLVING HB / MB MAKE GODREJ PCH-7001 / 7000 |
| 219 | M & L to removing u/s worn out faded foam, mesh fabric, elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back size of Seat 480mm x 510mm and Back 480mm X 510mm made by using 50mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new upholstery acrylic fabric mesh pattern of approved colour and texture i.e. Navy Blue/Maroon of rate not less than 250 per mtr.The fixing of febric shall be done completely all exposed surfaces without disturbing the existing parts by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 220 | M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping. S&F new upholstery acrylic fabric mesh pattern of approved colour and texture i.e. Navy Blue/Maroon to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of fabric shall not be less than 250 per mtr.The fixing of febric shall be done completely all exposed surfaces without disturbing the existing serviceable PU foam/part by using heavy duty gun tacker with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 221 | M & L to remove old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 222 | M & L to remove unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving godrej with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 223 | M & L to remove unserviceable pedestal assembly, S&F new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 224 | M & L to remove unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing. |
| 225 | Painting to all steel portion of chair revolving with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 226 | CHAIR WITH ARMS/WITHOUT ARMS MAKE GODREJ MODEL NO. PCH-7003/7004 |
| 227 | M & L to removing u/s worn out faded foam, mesh fabric, elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back size of Seat 460mm x 510mm and Back 460mm X 460mm made by using 50mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new upholstery acrylic fabric mesh pattern of approved colour and texture i.e. Navy Blue/Maroon of rate not less than 250 per mtr.The fixing of febric shall be done completely all exposed surfaces without disturbing the existing parts by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 228 | M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping. S&F new upholstery acrylic fabric mesh pattern of approved colour and texture i.e. Navy Blue/Maroon to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of fabric shall not be less than 250 per mtr.The fixing of febric shall be done completely all exposed surfaces without disturbing the existing serviceable PU foam/part by using heavy duty gun tacker with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 229 | M & L to remove unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 230 | M & L to Paint all steel portion of chair with arms with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smoothwith standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender