Tender For special Repair To 03 X Bathroom (Bldg No. T-234, T-234 B/P And T-235 At Si Lines Under Ge Bhopal
Tender Value
21.51 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
15 days left
EMD
43500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To 03 X Bathroom (Bldg No. T-234, T-234 B/P And T-235 At Si Lines Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L 15mm thick rendering intwo CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement including Taking down cement plaster on brick or stone walls/ceiling etc. complete all as specified and directed. |
| 3 | Demolition of Brick or Stone Masonry built in cement mortar etc complete all as specified and directed. |
| 4 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed. |
| 5 | M&L for modular size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in in cement mortar 1:4 complete all as specified and as directed. |
| 6 | M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper including one coat of white cement based putty of 1-2 mm thick complete all as specified and directed. |
| 7 | M&L for rendering 10 mm thick on other than fair face of brick work or concrete surfaces or brick masonry surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified. |
| 8 | Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of exterior weather proof water base emulsion paint on wall all as specified and directed. |
| 9 | S&F in repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 10 | M&L for Providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complette all as specifed and directed. |
| 12 | M&L for non-skid ceramic coloured joint free tiles 7 to 8 mm thick, area of each tiles exe 0.18 Sqm but not exe 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including demolition all as specified and directed. |
| 13 | M&L glazed ceramic colour tiles with matching highlighter in vertical surfaces ( design and pattern as approved by E-in-Cs) of size not less than 450x300x 7-8mm thick set and jointed in neat cement slurry fixed over and incl 10mm thick rendering in CM (1:4) as in backing coat and pointed in white cement including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 14 | M&L granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite complete all as specified and directed. |
| 15 | M&L for 605x605mm size frame of anodised aluminium snap grid frame work for false ceiling including G.I. Hanger wire 6 mm dia. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners and dismantling of old ceiling frame with board of any type and size all as specified and directed. |
| 16 | M&L for exposed metal frame ceiling with 8mm PVC coated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work shall be measured and paid separately). |
| 17 | M&c()L for ement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement,complete all as specified and directed. |
| 18 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed |
| 19 | S&F in repair/replacement Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45*70 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 20 | S&F in repair/replacement to Factory made single extruded WPC (WoodPolymer Composite) solid plain flush door shutter of 30 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 21 | S&F Butt hinges 125mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed. |
| 22 | S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge.Make : Global, Aluminium udyog/ARGENT INDUSTRIES |
| 23 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 24 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 25 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. including taking down complete all as specified and directed. |
| 26 | S&F 4.0 mm thick plain sheet glass ordinary quality exc 0.50Sqm in each pane including Hacking out old broken glass (any thickness quality or description) all as specified and directed. |
| 27 | S&F 4.0mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane including Hacking out old broken glass (any thickness quality or description) all as specified and directed. |
| 28 | S&F Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. |
| 29 | All as per item No 27.00 here-in before but plain sheeting, in ridges including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering completed all as specified and directed. |
| 30 | M&L steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 31 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil complete all as specified and directed. |
| 32 | M&L PCC 1:3:6 Type C2 using 40 mm graded stone aggregate in foundation, filling and mass concrete as in boundary pillars and post etc all as specified and directed. |
| 33 | S&F Framed work such as grills, gratings, steel gate , purlin etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 gde E-165, all as specified and directed. |
| 34 | M&L for preparation new steel surface of any description and applying two coats of synthetic enamel painting over one coat of Red oxide, zinc chrome primer all as specified and directed. |
| 35 | S&F in repairs 15 mm angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 36 | S&F in repair wash hand basin counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/oval shape complete all as specified and directed. |
| 37 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 38 | S&F in repairs 15 mm fancy type wall mounted pillar taps for table-top wash hand basin, single lever handle for on/off activation, with spout reach (long shanks) 16 cm (6.30 inches) cast copper alloy, high pressure, screwed for iron pipes and fixed complete incl necessary small GI fittings as approved by Engr-in-Charge. Make KOHLER, JAQUAR |
| 39 | S&F in repair half stall vitreous china urinal white colour of size 710x480x300mm, Ist quality with sensotrinic, sensor flushing valve with complete kit including CP waste with PVC down waste pipe concealed in wall (complete set) complete all as per manufacturer instructions, complete all as specified and directed. |
| 40 | S&F in repairs vitreous china squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed |
| 41 | S&F in repair to CP Health faucet (ABS body) mild steel chromium plated suitable for 15mm bore with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all necessary fittings and accessories as directed. |
| 42 | S&F in repair to PVC connections 15mm size with PTMT nuts of length 600mm.complete as in repairs complete all as specified and directed. |
| 43 | S&F in repair tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 44 | S&F in repair to 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 45 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 46 | S&F in repair looking bevelled edge mirror of selected quality glass, mounted on 6mmthick AC building board or commercial plywood and fixed to wooden plugs with SS Studs for holding and all arrangement complete all as specified and directed. |
| 47 | S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated fixing complete all as specified and directed. |
| 48 | S&F inrepair CP toilet paper holder with stainless steel flap complete all as specified and directed. |
| 49 | S&F in reapir soap dish holder of bootom Cp and glass holer for soap complete all as specified and directed.. |
| 50 | S&F inrepair CP towel ring round with round flange complete all as specified and directed. |
| 51 | S&F in repair 75 mm PVC(SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rain water pipes (any size or pattern), complete all as specified and directed. |
| 52 | S&F in repair PVC(SWR) 110mm pipes single socketed in any length with rubber rings joints laid in trenches or in floors including Taking down eaves gutters and rain water pipes (any size or pattern), complete all as specified and directed. |
| 53 | S&F in repair 75mm PVC(SWR) bend. |
| 54 | S&F in repair 75mm PVC(SWR) junction single (single 'T') equal or unequal. |
| 55 | S&F in repair 75mm PVC(SWR) vent cowl. |
| 56 | S&F in repair110mm PVC(SWR) vent cowl. |
| 57 | M&L in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 58 | S&F in repair PVC(SWR) 110 mm bend. |
| 59 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 60 | S&F 20 mm CPVC pipes SDR 11 and plain CPVC SDR 11 with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 61 | S&F Tubes 20 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down all as specified and directed. |
| 62 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed. |
| 63 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 64 | S&F in repair of stanless steel grating of 125 mm dia size, complete all as specified and directed. |
| 65 | S&F of 12mm thick frosted toughened glass as partitions or as hinged doors and similar work including cutting to shape, drilling holes required and necessary chrome finish fitting/ fixtures required complete all as specified and directed. |
| 66 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including Dismantling water tanks all as specified and directed. |
| 67 | S & F in repair 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed. |
| 68 | M&L for PCC in 1:4:8 type B1 (using 40mm graded aggregate) 100 mm thick as in sub base concrete complete all as specified and directed. |
| 69 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 70 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete as directed. |
| 71 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed. |
| 72 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 73 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) complete all as specified and directed. |
| 74 | M&L for DWCP drain pipes laid in trenches of 200 mm internal diameter of pipe and jointed including demolition complete all as specified and directed. |
| 75 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed. |
| 76 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 77 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed |
| 78 | Dismantling/taking down of unserviceable distribution boards with MCBs/change over switches any type all as specified and directed. |
| 79 | Taking down carefully serviceable exhaust fan and deposited to E/M store yard without any damage complete all as specified and directed. |
| 80 | Taking down carefully serviceable LED tube light and deposited to E/M store yard without any damage complete all as specified and directed. |
| 81 | Taking down carefully serviceable circular/square ceiling light and deposited to E/M store yard without any damage complete all as specified and directed. |
| 82 | M&L for concealed point wiring for one light/one fan/one exhaust fan controlled by one switch complete with and including single core PVC insulated FRLS copper conductor 1.5 sqmm cable multistranded copper conductor drawn through and including medium grade PVC conduit nominal size not less than 20mm including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover with addtional single core PVC insulated FRLS copper conductor 1.5 sqmm multistarands cable as continious earth wire including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates). |
| 83 | All as per Srl item No 81.00 here in before but for one scoket outlet 6 amp on independent board complete all as specified and directed. |
| 84 | All as per Srl item No 81.00 here in before but for one five pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. |
| 85 | All as per Srl item No 81.00 here in before but for one socket outlet 6 pin 6/ 16 Amps on independent board with wire of size 2.5 Sqmm complete all as specified and directed. |
| 86 | All as per Srl item No 81.00 here in before but for geyser on independent board with wire of size 4.0 Sqmm complete all as specified and directed. |
| 87 | S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed. |
| 88 | S & F modular socket 5 pin 6 Amp one module, 240 volts complete all as specified and directed. |
| 89 | S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed. |
| 90 | Supply and fixing modular socket outlet 2-in-1,6 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 91 | S&F ceiling rose 3 terminals poly carbonate isolated all as specified and directed. |
| 92 | S&F LED tube light fitting warm white/ white 20 watt 4 feet efficacy > 100 lumen/w, PF. >0.9, including connecting up with pvc insulated multistraded 3 core 1.5 sqmm copper conductor from celing rose to fittting connector all as specified and directed. |
| 93 | All as per item No 91.00 here-in before but for 10 watt ,2 feet Led tube light |
| 94 | S&F in replacement curved 6 watt LED warm white adjustable multiple angle mirror light including inbuilt LED driver for diffused lighting with high power LED as light source including connecting up with PVC insulated multistanded 3 core copper conductor cable of 1.5 sqmm size complete all as specified and directed.Make: cat part no LHEHDVP5IL1X007 of Havells or equivalant make from Bajaj / C&G complete all as specified and directed by GE |
| 95 | Supply and fix in replacement of LED slim square/circular glare free opal diffuser IP20 panel light fitting for surface ceiling light 15 watt warm white/white in colour including connected with pvc insulated 3 core 23/0.0076 size copper wire from celing rose to fittting connector all as specified and directed.Make-Halonix cat part no HLDRLR-R06-15-CW or equivalent make Bajaj/havells |
| 96 | Supply and fix wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 m³ per minute, three Nos of speed controlling including connecting up with PVC insulated multistanded 3 core copper conductor cable of 1.5 sqmm size complete all as specified and all as directed. |
| 97 | S&F sheet metal enclosure double door type concealed in wall 12 ways, 240 Volts, dust and vermin proof IP54 protection ,suitable for incorporation MCBs and isolators etc complete all as specified and directed. |
| 98 | S & F in replacement MCB SP suitable for 240 volts, AC supply 6 to 32 Amps 'B curve' and rupturing capacity not less than 10KA complete all as specified and directed. |
| 99 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps ' B curve' and rupturing capacity not less than 10KA complete all as specified and directed. |
| 100 | S&F in replacement building security light fitting complete with 36 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers including connecting up with PVC insulated multistanded 3 core copper conductor cable of 1.5 sqmm size complete all as specified and directed.Make:-CATPART NO ENDURASUNBEAMSL30WLEDSASYBOPCSENSO of heveels or equivalant make of Bajaj,helonix |
| 101 | S&F in replacement hexagon BULK HEAD Back-lit LED luminaire comprising of LEDs light fitting complete with 10 Watt heat resistant IP-66 protection and connected with pvc insulated multistranded three 1.5 sqmm copper conductor cable from ceiling rose to fittings connector all as specified and directed.Make- catpart no 830321 of bajaj or other equivalent make of hellonix,crompton,hevells |
| 102 | Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 103 | Supply and fix exhaust fan plastic body AC single Phase. 230V 50 Hz,RPM 1200, Copper winding of size 250 mm sweep with, blades, and frame and louvers including connecting up with PVC insulated multistanded 3 core 1.5 sqmm copper conductor cable of complete all as specified and directed. |
| 104 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall including connecting up with PVC insulated multistanded copper conductor cable of 1.5 sqmm 3 core complete all as specified and directed. |
| 105 | Supplying, installing, testing vertical type storage water heater (geyser), 25 litres capacity, shock proof high density PUF insulation body material, comprising following fittings (a) heating element (b) auto thermal cut and thermostat (c) pressure release valve (d) pvc insulated 3 core 2.5 sqmm copper cable of minimum length 1.5 metre (e) multifunction valve including fixing by grouting and fastener complete all as specified and as directed |
| 106 | Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 SSR including earth pit in any soil char coal common salt ,15 mm all around earth plate PCC (1:3:6) type with 40 x40x6 mm angle iron frame and RCC cover (1:2:4) type B1 of thickness 50 mm, including 6mm TMT bar 50 mm centre to centre spacing with 20 mm stone aggregate, water pipe made of light grade GI pipe 20 mm bore, MS funnel, wire mesh, handle made with MS bar of 10 mm dia and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel upto 7.5 m complete all as specified and directed by EIC. |
| 107 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard/dense soil complete all as specified and directed. |
| 108 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed |
| 109 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 110 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 111 | M&L for providing of un-reinforced precast concrete cable cover class LV, Type 1 size 250mmx 150mm x 40mm laid flat dry for protection of under ground cable complete all as specified and directed.class,, flat, complete all as specified and directed. |
| 112 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable pipe and getting out in soft disintegrated rock all as specified and directed. |
| 113 | M&L for making good the disturbed surface by filling PCC 1:2:4 type B-1 using 20 mm graded course aggregate to match with existing surfaces all as specified and directed. |
| 114 | Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 70 sqmm 3.5 core all as specified and directed. Note:- Excavation & earth work and pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item of this schedule) |
| 115 | Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 4 core all as specified and directed. Note:- Excavation & earth work and pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item of this schedule) |
| 116 | M & L GI Tubing \\"light grade\\" galvanized for protection LT Cable all as specified of size 40 mm bore complete all as specified and directed. |
| 117 | M & L GI Tubing \\"light grade\\" galvanized for protection LT Cable all as specified of size 100 mm bore complete all as specified and directed. |
| 118 | Design, Supply, Installation,Testing and commissioning of LT weather proof panel board outdoor type powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 2 mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outoor, with closed bus bar chamber with Aluminium bus bar 300 amps with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved required, indicator lamps R-Y-B,selector switches and internal wiring including making PCC foundation type B1 (1:2:4) 0.6 Mtr above ground level and 0.3 mtr below ground level grouting etc all as specified and directed including provision of suitable size of cable glands,cable lugs,nut, bolts,washers etc The provision of cable entry should be from Bottom The panel should be equiped with suitable size of CT and display meter for VAF measurement. (a) Aluminium bus bar capacity 300 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB FP 36 KA 160 Amp (fixed thermal magnetic release )- 01 Nos (Incoming) (c) MCCB FP 25 KA 100 Amps (fixed thermal magnetic release) - 02 Nos (outgoing) (d) MCCB FP 16 KA 63 Amps (fixed thermal magnetic release) - 02 Nos (outgoing) (e) MCB SPN 10 KA 63 Amps - 02 Nos (outgoing) (f) Digital Ammeter flush pattern type square dial 96 x 96 mm alongwith selector switch - 01 No and suitable CT ratio 0-300 Amps (g) Digital Voltmeter flush pattern type square dial 96 x 96 mm alongwith selector switch - 01 No 0-500 V (h) complete control panel wiring with stranded copper conductor of suitable size along with one set indicator lamp for R,Y & B for each incoming and outgoing feeder |
| 119 | Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earthing strip of size 32X6mm as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 40 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with including earth pit in any soil char coal common salt ,15 mm all around earth plate PCC (1:3:6) type with 40 x40x6 mm angle iron frame and RCC cover (1:2:4) type B1 of thickness 50 mm, including 6mm TMT bar 50 mm centre to centre spacing with 20 mm stone aggregate, water pipe made of light grade GI pipe 20 mm bore, MS funnel, wire mesh, handle made with MS bar of 10 mm dia and GI pipe light grade 40 mm dia upto panel connecting earth lead to panel upto 7.5 m complete all as specified and directed by EIC. (Note :If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.) |
| 120 | Taking down carefully 20 mm GI tubing of any type including connected fittings from its position, as schedule of credit all as specified and directed. |
| 121 | Taking down carefully 25 mm GI tubing of any type including connected fittings from its position, as schedule of credit all as specified and directed. |
| 122 | Supply and fix GI tubing medium grade of size 20 mm dia galvanised laid in floors/walls including fittings such as bends elbows reducers and complete accessories complete all as specified and directed. |
| 123 | Supply and fix GI tubing medium grade of size 25mm dia galvanised laid in floors/walls including fittings such as bends elbows,sockets reducers etc complete accessories complete all as specified and directed. . |
| 124 | Supply and fixing Gun metal gate valve/glove valve with Iron wheel head screwed both end for GI tubing of size 20 mm dia complete all as specified and directed. . |
| 125 | Supply and fixing 25mm Gun metal gate valve/glove valve with Iron wheel head screwed both end for GI tubing of size 25 mm dia all as specified and directed. |
| 126 | S&F 1000 ltrs capacity Rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in IS Code -12701-1996 complete all as specified and directed |
| 127 | Supply and fixing 20mm PVC float with complete connected fittings for GI tubing of size 20 mm dia complete all as specified and directed. |
| 128 | Deduct Schedule of credit (calculation will be done off line) Rs. 18052.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender