Tender For Repair To Culvert, Drain, Footpath, Fencing, Boudary Wall And Misc Assets In Dstv Md Accn & Nearby In Aor Of Age B/R-I Under Ge Hisar At Hisar Mil Station
Tender Value
30 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
3 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Culvert, Drain, Footpath, Fencing, Boudary Wall And Misc Assets In Dstv Md Accn & Nearby In Aor Of Age B/R-I Under Ge Hisar At Hisar Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork or masonry and making good disturbed ground complete all as specified and directed. |
| 2 | Excavation in post holes (or Similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose/hard/dense soil complete all as specified and as directed. |
| 3 | M&L for providing cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed. |
| 4 | S&F plates (plain or chequered) Channels, square, cut or notched (ordinary and counter sunk) forming holes without any attachment of Fe-410-W (Grade E-165) quality B complete all as specified and as directed. |
| 5 | S&F mild steel works such as hand rail, half round or other stock section or core for wooden hand-rail straight portion drilled and counter sunk for baluster, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing with bolts post and strut in fencing including cutting tops to shape as directed dilling holes notcning for wire etc, flat iron fillets for securing fencing mesh including all necessary drilling, bolting or rivetting etc and similar work using rolled section confirming to Fe-310-0 or Fe-410-0 complete all as specified and as directed. |
| 6 | Dismantling chain link fencing wiremesh, any type complete all as specified and as directed by the Engineer-in-charge. |
| 7 | Fixing only chain link fencing including linew ires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 8 | Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 9 | M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips confirming to Fe-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) complete all as specified and as directed. |
| 10 | M&L for preparation of new surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 11 | M&L for preparation of new surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coats of black japan paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 12 | M&L for preparation of new or previously untreated surfaces of steel not exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 13 | M&L for one coats of synthetic enamel paint on old steel surfaces of any discription complete all as specified and directed. |
| 14 | S&F mild steel screw bolts (machine made) with hexagonal or square heads diameter of neck 11mm to 15mm of at one end and screwed the other or screwed both ends, each srewed end to be fitted with washer and one hexagonal or square nut not exc 5 cm long complete all as specified and as directed. |
| 15 | S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provisionof galvanised mild steel wire staples or steel pins, etc complete all as specified and directed.(Note :- Each line wire to be measured) |
| 16 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor all as directed. |
| 17 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified. |
| 18 | M&L for 100 mm thick Hard core of broken stone or boulders of gauze not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L for 75 mm thick PCC (1:4:8) using 40 mm graded stone aggregate as in sub base of floor finishes complete all as specified and directed. |
| 20 | M&L for factory made 60mm thick machine pressed rubber moulded precast cement concrete coloured (Red, Grey and Yellow) interlocking paver blocks glossy finish of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed by EIC. |
| 21 | M&L glossy finish rubber moulded chequered cement concrete coloured (Red, Grey and Yellow) tiles, 300mmx300mmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, over & including 15mm thick screed bed in cement & sand mortar 1:6, complete, all as specified & as directed. |
| 22 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed, |
| 23 | M&L for providing cement concrete type B-0,1:2:4 ( 12.50 mm graded aggregate ) as in packing of interlocking tiles complete all as directed. |
| 24 | Dismantling of brick work built in cement mortar of any description complete all as specified and directed by the Engineer-in-Charge. |
| 25 | M&L for Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 26 | Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc in CM 1:4. |
| 29 | M&L for two coat of cement base paint on new decorated surfaces of walls including preperation of surfaces complete all as specified and directed. |
| 30 | M&L for one coat of cement base paint on old decorated surfaces of walls including preperation of surfaces complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified. |
| 32 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation ,filling and mass concrete complete all as specified and directed. |
| 33 | M&L for cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate as in coping complete all as specified and directed. |
| 34 | M&L for cement concrete type B2 (1:2:4) (using 24 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 35 | M&L for one coats of synthetic emulsion paint of any description on old plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described including preparation, complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for two coats of Synthetic emulsion paint of any description on new plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described over a coat of primer.complete all as specified and directed by Engineer-in-Charge. |
| 37 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land. |
| 38 | M&L for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork .Note : S&F reinforcement shall be measured and paid separately. |
| 39 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender